Accessories
L.R. Baggs Stadium DI Electric Bass DI
$ 249.99 $ 359.99
Originally developed by the bass playing engineers at LR Baggs for their own use, the Stadium Electric Bass DI infuses your signal with a blend of studio-grade circuitry and a vibrant palette of unique, tone shaping tools. Composed of carefully selected, “top shelf” components, the all-discrete electronics provide a level of fidelity that rivals even the most sought after studio DIs. Then engage the effects to unveil an expansive range of colorful tones shaped by just a few powerful and easy-to-use controls. Built in a rugged enclosure constructed of aluminum, steel, and ABS plastic, the Stadium DI ensures over-the-top reliability for life on the road. Hand assembled in California.
Tone Shaping Tools
GROWL
Unlike overdrives that employ full-range distortion, the Growl saturates a focused range of low frequencies, enhancing warmth and creating harmonically rich overtones without too much breakup. The effect compliments dynamics and is responsive to even the lightest touch, providing just the right amount of edge to cut through the mix. For added versatility, a paired Drive button pushes the Growl to a full-range overdrive.
COMP EQ
The Comp EQ features 3 bands of compression for bringing evenness to your tone while retaining the natural feel of your playing dynamics. The low, mid, and high frequency compressors are essentially “touch-sensitive” EQs that respond in real time as you play. The harder you dig in, the more they compress and vice versa.
ATTACK
This highly specific EQ affects a unique, medium sized bandwidth to adjust the attack of the strings for a wide range of tones, covering all playing styles. Sweep left for warmer, muted jazz tones or right for added clarity and a punchier attack.
FEATURES
- Growl control adds low end distortion for thickness and rich, harmonic content
- Drive button pushes the Growl to a full overdrive
- Comp EQ enhances the feel of playing while evening out your tone
- Attack sweeps between a wide range of warmth, clarity, and everywhere in between
- Fat switch boosts 150Hz +3dB or +6dB for a fuller, rounded tone
- VU meter visually optimizes gain for passive and active pickups
- All-discrete signal path with XLR and quarter inch outputs
- 48V phantom power, 9V battery, or 9V DC powering options
- Pad boosts or cuts XLR out (-10dBV or +4dBu) to meet the needs of the PA
- Ground lift switch effectively eliminates ground-loop noise
- Rugged enclosure constructed of aluminum, steel, and ABS plastic
- Includes custom LR Baggs carrying case
L.R. Baggs Venue DI Acoustic Guitar Preamp
$ 329.00 $ 472.00
We created the Venue DI so you can travel light, set up fast and sound incredible anywhere you plug in. The Venue DI gives you complete control by combining a full-isolation DI output, 5-band EQ with adjustable low & hi-mid bands, variable clean boost and chromatic tuner all in one acoustic pedal. With its all-discrete signal path, hi-graded semiconductors and exclusive use of audiophile grade film capacitors, the Venue DI is on par with the world’s elite preamps and provides a studio quality sound for the stage.
- Adjustable gain for both passive and active pickups
- 5 band EQ with tunable low-mid and high-mid bands
- Garret Null notch filter for effective feedback control
- Phase inversion for best sound and feedback control
- Full chromatic tuner with footswitch mute/tune function
- Adjustable volume boost footswitch
- Full isolation audio transformer couple DI
- 4 segment clip meter to visually optimize gain setting
- 4 segment battery )status gauge
- XLR and 1/4" outputs
- Series FX loop (separate jacks for send and return)
- Works with 9V battery or DC adapter (not provided)
L.R. Baggs Violin Pickup
$ 139.99 $ 199.99
Our Violin Pickup is a miniature vibration sensor cast directly into a Superieur Despiau “Two Tree” maple bridge for maximum sensitivity and signal transfer. As an integral part of the bridge, it effortlessly captures the instrument’s inherent dynamics. Furthermore, its selective admittance pattern is aligned so that the signal is generated as the bridge moves in a left-right motion (in response to the string vibrations). The pickup also rejects any impulse directed to the plane of the bridge- minimizing annoying finger squeaks, body noise and feedback. It is the pickup of choice for top pros like Mark O’Connor, Darol Anger, Jean-Luc Ponty and Sara Watkins. An external preamp is recommended..
FEATURES:
- Superieur Despiau "Two Tree" maple bridge
- Even string-to-string balance
- Highly feedback-resistant
- External jack mount
Levys Solera Series Leather Bass Guitar Bag - Black
$ 699.99 $ 884.00
Introducing the reimagined Levy's Leathers Guitar Bag, where timeless craftsmanship meets modern functionality. The exterior is crafted from premium Crazy Horse leather, celebrated not only for its durability and rugged charm but also for its ability to develop a rich patina over time. As the leather ages, it gains unique character, telling the story of the player and every journey it's accompanied them on. Each scuff and subtle color shift adds to its individuality, making the bag as distinctive as the player.
Inside, a plush 1" foam interior provides gentle cushioning for your instrument, protecting it from bumps and scratches. The roomy exterior pocket offers convenient storage for tuners, picks, and cables, keeping your essentials easily accessible. Fusing classic aesthetics with thoughtful design, the Levy's Leathers Guitar Bag is more than just a protective case—it's a statement of craftsmanship, care, and the shared journey of musician and instrument. Wherever the road takes you, trust Levy's to protect your guitar with lasting reliability and style.
Features
Line 6 Catalyst 100 Amplifier Cover - Black
$ 29.99
Line 6 Helix Floor Guitar Processor
$ 1,599.99 $ 2,239.99
Helix® Floor and Helix Rack are the flagship guitar processors of the Helix family, offering incredible power, flexibility, and control. HXTM Modeling uses dual-DSP processing to deliver the nuanced character that exists in the original classics, giving you natural bloom, compression, modulation, and honk on some models, as well as intense gain and breakup in others.
Not only do HXTM Models sound and feel real, Helix Floor and Helix Rack processors are comprehensive master controllers for your guitar system, with extensive I/O that provides unprecedented flexibility for studio and stage. Touch-sensitive footswitches, customizable scribble strips, and a large color LCD make the user experience faster and more efficient.
- Powerful Dual-DSP HX Modeling
- Large 6.2”, 800x480-Pixel LCD Screen
- 62 Amps, 37 Cabs, 16 Microphones, and 104 Effects
- Capacitive Footswitches and Customizable Scribble Strips. Touch to Edit, Hold to Assign, Press to Engage
- Up to 3 Expression Pedals, CV/Expression Output, External Amp Switching, and Deep MIDI Control
- 22.05 x 11.85 x 3.58 inches, 14.7 lbs
Line 6 Pod Express Bass Portable Bass Amp
$ 179.99 $ 259.18
POD EXPRESS | BASS
Take It Anywhere
POD® Express Bass is an ultra-portable bass amp and effects processor that enables bassists to take their tones wherever they choose. Simple controls make it easy to use, while models derived from the HX® family of processors ensure exceptional sound quality and authentic feel. POD Express Bass gives bassists seven amps, seven cabs, and 17 distortion, compression, synth, modulation, and delay effects—including a looper—and it may be powered by three AA batteries (included) or an optional 9-volt power supply.
Line 6 POD Express Bass Features:
- Ultra-portable design can go anywhere you go
- 7 amp models, 7 cab simulations, and 17 effects based on Line 6's cutting-edge HX-derived technology
- Simple control set makes dialing in thunderous bass guitar tones a straightforward affair
- Can be powered by either batteries or an optional power supply (sold separately)
- Includes tap tempo, a tuner, a noise gate, and a full-featured looper
- Stereo main outputs and a stereo headphone output
- Built-in USB-C audio interface for effortless recording, monitoring, and re-amping
- Accommodates an optional expression pedal or 2 external footswitches
Martin 12C0072 Acoustic Guitar Case - Olive Drab
$ 299.99
Description & Specs
Martin 12C0072 Hardshell Case for Dreadnought
- Sized for Martin D-18
Martin 12C330 Hardshell Plush Case
$ 299.99
Martin 600 Series Molded Dreadnought 14-Fret Case - Black
$ 379.99
Plush, rugged impact resistant exterior with embossed C.F. Martin logo. Nickel-plated hardware and key lock. Interior is form fitted with padded plush lining. Black/Green.
- B Quality/Sold As Is
- Dreadnought Style; 14-Fret
- Black/Green
**Items pictured for illustrative purposes only
B Quality Cases are sold as is and are 80 to 89 percent of the original condition. These cases show moderate wear with dings, blemishes and other issues but will not affect the functionality of the case. Moderate wear could include but is not limited to the below.
- Loose Lining in Isolated Areas of the Interior
- 1-2 Offset Latches; Latches will still secure the case
- Light Seam Separation
- Glue Spots from Manufacturer on Exterior/Interior of Case
- Loose Interior Pockets
Mesa Boogie 2x10 Subway Ultra-Lite Diagonal Bass Cabinet - Black
$ 1,299.00 $ 1,850.00
The Compact Solution for Players who Prefer the Midrange Articulation and Focus of 10s
The 2x10 is the compact solution for players who prefer the midrange articulation and focus of 10s, but need a smaller option than the classic 4x10. Combining two allows a more portable solution than one heavier quad-box and the ability to take one for rehearsal or small venues and two for gigs with louder bands or in bigger venues. Using the 2x10 in combination with a 1x12 or 1x15 imparts color, articulation and iconic midrange punch along with more volume. Built with all the same woods, aircraft-style bracing and Tri-Port™ porting, the 2x10 Ultra-Lite brings another key voice to the modular approach in compact, lightweight Bass Cabinetry.
- Cabinet Material: Light-Weight Italian Poplar
- Standard Finish Options (no extra cost): Choice of Black Bronco or Black Taurus Vinyl with Black Metal Grille
- Corner Material: Lexan
- Custom Finish Options: See Custom Finish Gallery
- Styletype: Tuned Front Ported Tri-Porting™ (2 x 5.25 square x 4" deep / port area = 30.25 sq. in.)
- Cabinet Internal Volume: 2.96CF
- Speakers Mounting Position: Subway Neodymium Speakers / Front Mounted
- High Frequency Horn: Yes
- Horn Control: Premium Attenuator
- Inputoutput Connectors: 2 x SpeakOn-1/4" (NL-4 combo)
- Nominal Impedance: 8 ohms (only)
- Minimum Impedance @Frequency: 7.90 ohms (@21Hz)
- Average Sensitivity (RMS) 50hz-1000hz: 98.1dB/1W/1M
- Average Mechanical Power (RMS) 50hz-1000hz: 500 Watts
- Minimum Mechanical Power (RMS) @Frequency: 425 Watts (@81.3Hz)
- Low Freq F3 (Hz): 53.6 Hz
- Low Freq F6 (Hz): 48.0 Hz
- Low Freq F10 (Hz): 42.1 Hz
- High Freq Response: >12kHz
- Transport Assistance: Optional (sold separately) - Track-Loc™ Removable Casters
- Additional Features: n/a
- Slip Cover: Included - Fitted Slip Cover
Mighty Bright 2-LED USB Light
$ 14.99
No more squinting in the dark.
The 2-LED USB Light is a portable computer light that plugs into a standard USB port. This model is the brightest in the Mighty Bright USB line and it's serious about helping you focus. Two LEDs shine a mini spotlight across your keyboard, paperwork, and that cup of coffee you'll need if you're working late again. The neck is totally flexible and folds up into any compact shape for your computer bag or hand bag. LEDs are rugged and energy efficient, making the light a sound investment - more necessity than accessory. You'll be using your laptop the way you always imagined- that is, whenever you want.
- Two energy-efficient LEDs cast bright white light
- Durable LEDs last 100,000 hours - no replacement necessary
- Use one or two LEDs by tapping button
- Precisely engineered optical grade lens spreads light evenly
- Adjustable neck holds the light securely in place
- Light easily folds into ultra-compact shape for convenient storage
Mighty Bright LED Orchestra Light
$ 59.99
Mighty Bright’s LED Orchestra Light is the brightest in the business. The sleek, black music stand light blends in, is tasteful and understated, and comes with a convenient travel case and AC adapter. Use the light with the AC adapter to enable centralized switching capabilities - perfect for large concerts. The long head features a row of nine brilliant LEDs and a sliding power button that offers two light level options. Set at the higher level to brighten up to four pages of sheet music. A discrete back fin directs light away from the audience and back to the sheet music. This stylish light is seriously sturdy, from clip to bulbs. The extra broad clip is a Mighty Bright exclusive design, with a powerful grip set on a broad base. The gooseneck is robust but allows users to make precise adjustments easily, even during a performance. Its energy-efficient LEDs are not only sturdy enough to withstand the rigors of tear down and travel, but they also heighten the contrast of the notes and words on sheet music. Lighting system? Check. Let the magic begin.
FEATURES
• Nine energy-efficient LEDs cast bright white light
• Durable LEDs last 100,000 hours - no replacement necessary
• Sliding switch controls two brightness settings
• Precisely engineered optical grade lens spreads light evenly
• Broad, padded clip
• Base can be used freestanding
• Flexible gooseneck holds the light firmly in place
• Light easily folds for convenient storage
• Powered by 3 AA batteries (included) or AC adapter with 13 foot/4 meter power cord (included; US, UK, European plug models available)
• Durable travel bag included
• 1.5" x 16.5" x 8" (Length x Height x Width)
• Product Weight: 10.2 oz
Morgenstein First Edition Wing Thing Tool For Drums
$ 59.00 $ 79.00
Easily tighten or loosen wing nuts with Wing Thing.
- Morgenstein First Edition
MXR Studio Compressor M76 Pedal
$ 199.99 $ 263.98
The Studio Compressor provides recording-quality compression with Constant Headroom Technology™ and true bypass switching for clear, clean performance.
This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
THE LONG STORY
- Input Impedance 1 MΩ
- Output Impedance 600 Ω
- Max Input Level +14 dBV
- Max Output Level +8.5 dBV
- Frequency
- Response
- ±1 dB, 20 Hz
- to 20 kHz
- Noise Floor* -90 dBV
- THD** < 0.5%
- Gain 31 dB
- Compression Ratio 4:1, 8:1,
- 12:1, 20:1
- Attack Time 20 µs to 800 µs
- Release Time 50 ms to 1.1 s
- Bypass True Hardwire
- Current Draw
- LEDs OFF 14 mA
- LEDs ON 19 mA
- Power Supply 9 volts DC
Pedaltrain Classic Jr in Deluxe Soft Case
$ 139.99 $ 168.00
About Classic JR
Pedaltrain’s Classic Series is rooted in the company’s best-selling pedal board models. Based on the original PT-JR, the Classic JR features Pedaltrain’s original four-rail design and traditional rail spacing. The Classic JR features an open front design, (portholes are history) making power supply mounting more flexible and convenient. The Classic JR was designed to provide a wider stance at 18 inches and a raised elevation by approximately 1 inch. Classic JR is available for purchase with either Pedaltrain’s fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points) or professional-grade tour case.
Included
- Classic JR Pedal Board
- Soft Case with Shoulder Strap
- 72" of Professional Grade Hook-and-Loop
- Assortment of zip ties
Specifications
Classic JR Pedal Board
- Dimensions: 18 in x 12.5 in x 3.5 in (45.7 cm x 31.7 cm x 8.9 cm)
- Weight: 2.6 lbs (1.18 kg)
Soft Case
- Familiar Pedaltrain soft case styling
- Exterior accessory storage pocket (sizes vary by model)
- Platinum SBS zippers on main compartment and accessory storage pocket
- Premium shoulder strap with padded shoulder pad and enhanced swivel clasp
- Easy-wipe interior
- Water-resistant exterior shell
- Deeper case for extra-tall pedals on all elevated Pedaltrain models
- Main compartment Interior dimensions (including lid height):18" x 13" x 6" (46 x 33 x 15 cm)
- Accessory pouch outer dimensions:15" x 10" x 1.5" (38 x 25 x 4 cm)
Model: PT-CLJ-SC
Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime. Our pedal boards are ultra light with an unmatched strength-to-weight ratio. Each Pedaltrain is hand cut, hand welded, and hand finished. No shortcuts taken, ever. No moving parts, screws or anything that can fail. We back up our pedal board claims with a lifetime warranty against defects in materials and workmanship.
Pedaltrain Metro 16 in Deluxe Soft Case
Sold Out $ 108.00
About Metro 16
The Metro Series is Pedaltrain’s three-rail pedal board system. Pedaltrain’s Metro Series is perfect for players who need a portable, grab-and-go solution. Musicians who live or work in urban settings or tight spaces will appreciate Metro’s low profile and horizontal orientation. Thanks to Pedaltrain’s modified rail system, even the smallest pedals make an incredibly strong bond with the pedal board. Metro Series is big enough for your essentials, including most multi effects units. Metro Series pedal boards are available for purchase with either Pedaltrain’s fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points) or Pedaltrain's protective hard case.
Included
- Metro 16 Pedal Board
- Soft Case with Shoulder Strap
- 48" of Professional-Grade Hook-and-Loop
- Assortment of zip ties
Specifications
Metro 16 Pedal Board
- Dimensions: 16 in x 8 in x 1.4 in (40.6 cm x 20.3 cm x 3.5 cm)
- Weight: 1.3 lbs (.58 kg)
Soft Case
- Familiar Pedaltrain soft case styling
- Exterior accessory storage pocket (sizes vary by model)
- Platinum SBS zippers on main compartment and accessory storage pocket
- Premium shoulder strap with padded shoulder pad and enhanced swivel clasp
- Easy-wipe interior
- Water-resistant exterior shell
- Main Compartment Interior Dimensions: 16" x 8" x 3" (41 x 20 x 7.5 cm)
- Accessory Pouch Outer Dimensions: 13" x 7" x 1.5" (33 x 18 x 4 cm)
Model: PT-M16-SC
Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime. Our pedal boards are ultra light with an unmatched strength-to-weight ratio. Each Pedaltrain is hand cut, hand welded, and hand finished. No shortcuts taken, ever. No moving parts, screws or anything that can fail. We back up our pedal board claims with a lifetime warranty against defects in materials and workmanship.
Pedaltrain XD-18 in Deluxe Soft Case
$ 179.99 $ 216.00
PEDALTRAIN XD-18
The XD series is a new form factor from Pedaltrain. Six rails. Novo spacing. Extra deep mounting surface. Stack pedals three deep? Can do. Add a switching system? No problem. Expression pedals? Of course! Fully compatible with accessories like VDL-MK, Boosters, TFMK-SM and all of the after market add-ons that are out there.
Included
- XD-18 Pedal Board
- Deluxe Soft Case with Shoulder Strap
- 120" of Professional Grade Hook-and-Loop
- Assortment of zip ties
Specifications
XD-18 Pedal Board
- Dimensions: 18 in x 17.5 in x 3.5 in (45.72 cm x 44.45 cm x 8.9 cm)
- Weight: 3.6 lbs (1.63 kg)
Soft Case
- Familiar Pedaltrain soft case styling
- Exterior accessory storage pocket (sizes vary by model)
- Platinum SBS zippers on main compartment and accessory storage pocket
- Premium shoulder strap with padded shoulder pad and enhanced swivel clasp
- Easy-wipe interior
- Water-resistant exterior shell
- Deeper case for extra-tall pedals on all elevated Pedaltrain models
- Main compartment Interior dimensions (including lid height): 20" x 19" x 6" (50.8 x 48.26 x 15 cm)
- Accessory pouch outer dimensions: 16" x 15" x 1.5" (40.64 x 38.1 x 3.8 cm)
Model: PT-XD18-SC
Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime. Our pedal boards are ultra light with an unmatched strength-to-weight ratio. Each Pedaltrain is hand cut, hand welded, and hand finished. No shortcuts taken, ever. No moving parts, screws or anything that can fail. We back up our pedal board claims with a lifetime warranty against defects in materials and workmanship.
Pigtronix 2NR Chromatic Tuner
$ 99.00 $ 118.00
ZEN AND THE ART OF TUNING
The Pigtronix 2NR is a no-nonsense, high-precision chromatic tuner pedal for guitar and bass. It features a large, high-contrast LED screen and ultra-fast pitch detection software that makes tuning quick and easy for musicians of every skill level.
2NR intentionally contains no extraneous features. There are no alternate modes or opportunities for accidental frustration. The pedal exists solely to help musicians tune their instrument to 440 Hz standard concert pitch as quickly and accurately as possible.
When 2NR is activated, the output is muted. When the pedal is not in use, relay-based, true bypass switching ensures that 100% of your tone passes through the pedal without any loss of fidelity. Housed in a robust aluminum chassis, 2NR is built for a lifetime of onstage performance. Pigtronix 2NR runs on standard 9VDC power.
Specs
MODEL CHROMATIC TUNER |
||
MODEL NAME |
Chromatic Tuner | |
SKU |
2NR | |
FUNCTION |
Tuner | |
CATEGORY 1 |
Utility | |
CATEGORY 2 |
- | |
EXPRESSION |
- | |
BYPASS |
True Bypass | |
ELECTRONICS |
||
VOLTAGE |
9VDC | |
CURRENT DRAW |
100mA | |
INPUT IMPEDANCE |
100k | |
OUTPUT IMPEDANCE |
n/a | |
BODY |
||
LENGTH (IN) |
4.5 | |
WIDTH (IN) |
2.5 | |
HEIGHT (IN) |
2 | |
WEIGHT (LBS) |
1 | |
Pigtronix Cosmosis Stereo Morphing Reverb
$ 219.00 $ 262.80
MORPH ACROSS THE SPACETIME SPECTRUM.
Years in the making and the first of its kind, Cosmosis is a stereo, high-fidelity ambient reverb that allows musicians to tailor three original spaces—Theatre, Temple, and Cosmos—as well as manipulate them in real time. In addition to controls for the size of the reverb, wet/dry blend, and filtering, Cosmosis features a unique Morph function that allows musicians to alter their reverb settings in real-time by pressing the left footswitch. The three space algorithms found inside of Cosmosis are all-original and truly unique. Theatre puts the player in a variable room that ranges from cozy to highly reflective using multiple parallel short reverberators. Temple occupies a dramatic, large indoor space by implementing numerous long reflections in both parallel and series. And Cosmos creates an enormous spectrum of heavenly reverb derived from the harmonic content it’s fed. The Morph feature found in Cosmosis provides a simple way for players to trigger a gradual change to various reverb parameters over a specified amount of time set by the accompanying Morph Rate knob. Players can set both “red” and “green” values on their Tone, Blend, and Size knobs, then engage the Morph footswitch to oscillate between the two reverbs at their desired rate. Any combination of knobs can be assigned to morph. Create elegant morphs for subtle movement or sweeping, cinematic morphs for dramatic sound design effects. Save up to four custom reverb presets, including morphing. Cosmosis runs on standard 9VDC power.
Specs
MODEL COSMOSIS |
||
MODEL NAME |
Cosmosis | |
SKU |
COS | |
FUNCTION |
Stereo Ambient Reverb with Morphing | |
CATEGORY 1 |
Reverb | |
CATEGORY 2 |
- | |
EXPRESSION |
TRS Remote | |
BYPASS |
Buffered | |
ELECTRONICS |
||
VOLTAGE |
9VDC | |
CURRENT DRAW |
100mA | |
INPUT IMPEDANCE |
High | |
OUTPUT IMPEDANCE |
1k | |
BODY |
||
LENGTH (IN) |
3.25 | |
WIDTH (IN) |
4.5 | |
HEIGHT (IN) |
2.2 | |
WEIGHT (LBS) |
1 | |
Pigtronix Infinity 2 Dual Stereo Looper
$ 199.00 $ 238.80
INFINITY AND BEYOND
Infinity 2 is a hi-fi stereo double looper designed to be the ultimate writing, arranging and performing tool. It can be utilized as a double looper to record and perform sequential parts, or as a standard looper on the right footswitch while assigning one of five selectable modes to the left footswitch. As a double looper, Infinity 2 enables musicians to seamlessly switch between loops, even during initial recording or while overdubbing. As a standard looper plus assignable effects, Infinity 2 becomes an ambient dream machine.
Specs
MODEL |
||
MODEL NAME |
Infinity 2 | |
SKU |
SPL2 | |
FUNCTION |
Stereo Double Looper | |
CATEGORY 1 |
Looping | |
CATEGORY 2 |
- | |
EXPRESSION |
TRS Remote | |
BYPASS |
Buffered | |
ELECTRONICS |
||
VOLTAGE |
9VDC | |
CURRENT DRAW |
100mA | |
INPUT IMPEDANCE |
High | |
OUTPUT IMPEDANCE |
1k | |
BODY |
||
LENGTH (IN) |
2.6 | |
WIDTH (IN) |
4.5 | |
HEIGHT (IN) |
2.2 | |
SHIPPING WEIGHT (LBS) |
5 | |
Pigtronix Infinity 3 Stereo Looper
$ 419.00 $ 502.80
A WHOLE NEW WORLD OF LOOPING
Infinity 3 is the world’s most musical looping pedal. Simple to operate, yet tremendously powerful and flexible, the Infinity 3 guarantees latency-free looping. Our state-of-the-art platform provides instantaneous record, playback, dub, undo and redo, on two stereo loop pairs that can be played in series or parallel as well as synchronized and cue'd for automatic playback. On top of superior speed and a unique, performance-friendly feature set, Infinity 3 sounds downright incredible thanks to its discrete analog limiter stages, transparent analog pass-through and 24 bit HD recording engine with variable sample rate that can be incremented in semi-tones over two octaves. With approximately 3 hours of recording time on up to 50 loop pairs, the Infinity 3 was designed to inspire compositional depth and engaging performances. Comprehensive MIDI control and intelligent MIDI clock jitter correction provide the ability to link the Infinity 3 to a DAW, Drum Machine or other effects pedals. Infinity 3 is the ultimate tool for writing, rehearsing and performing every style of music.
Specs
MODEL |
||
MODEL NAME |
Infinity Looper 3 | |
SKU |
SPL3 | |
FUNCTION |
Deluxe Stereo Double Looper w/ MIDI | |
CATEGORY 1 |
Looping | |
CATEGORY 2 |
- | |
EXPRESSION |
TRS 10K or 0-5V CV, TRS Remote, MIDI | |
BYPASS |
Buffered | |
ELECTRONICS |
||
VOLTAGE |
18VDC | |
CURRENT DRAW |
200mA | |
INPUT IMPEDANCE |
1M | |
OUTPUT IMPEDANCE |
150ohms | |
BODY |
||
LENGTH (IN) |
5 | |
WIDTH (IN) |
7.4 | |
HEIGHT (IN) |
2.4 | |
WEIGHT (LBS) |
1.2 | |
Planet Waves O-Port
$ 29.99
O-PortThe O-Port will make any guitar from beginner to custom sound richer, fuller, and louder, with more clarity and better projection. The O-Port material is custom blended for flexibility to prevent damage to your guitar finish and inlays. The O-Port will suppress feedback and give your acoustic or acoustic electric guitar a fuller sound with more volume, better clarity and enhanced projection.
Richer, fuller, louder sound with more clarity and better projection
Simple installation by loosening or removing strings and fitting the O-Port into soundhole
Suppresses feedback
Large fits 3.875" - 4" (9.843cm - 10.16cm)
Small fits 3.375" - 3.5" (8.573cm - 8.89cm)
Requires no modification to the instrument
Planet Waves, part of the D'Addario family of brands, is known for innovative, problem-solving, quality musical accessories. Planet Waves offers a complete line of award-winning accessories including cables, picks, tuners, capos, straps, humidifiers, maintenance tools and more.
PRS Floating Guitar Stand
$ 199.00
PRS Guitars floating guitar stand is the perfect way to display your favorite guitar. Its sleek, minimalist design lets the stand disappear allowing your favorite guitar to take center stage!
Our Engineers have carefully helped in the design of this stand to make sure it is stable and safe for your favorite instrument.
Design features:
• Heavy Duty Construction
• Fits most acoustic and electric guitars
• Heavy weighted base ensures the stand will not tip over
• Three-pointed base engineered for maximum stability
• Nitro-friendly foam head stock cradle
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2025 Huber Breese Music. Powered by Shopify
