Bass Amplifiers

Ampeg Heritage 50th Anniversary SVT Bass Amp Head

$ 2,999.99 $ 4,199.98

The Ampeg^® SVT^® is more than just a bass amp—it sparked a revolution. When it debuted in 1969, deafening walls of full-stack guitar amps were eating bass players alive. Knowing that big bass volume required big power, Ampeg designed the most sophisticated amp of its day: the 300-watt SVT. Finally, balance returned to the stage and with it a generation of iconic bass-forward music was born. That singular Ampeg spirt of innovation and ingenuity is alive and well in the Ampeg Heritage^TM 50th Anniversary SVT bass amp. Designed to honor the unrivaled SVT legacy, the Heritage 50th Anniversary SVT distills the legendary amp’s most celebrated circuits into a single stage-ready head with a host of must-have modern technology and elegant vintage aesthetics. It truly is the SVT for the 21st century.

The 1969 “Blue Line” and mid-1970s Magnavox-era circuits in one amp
Handmade in the U.S.A. from durable top-shelf components
Detailed, period-correct graphics and fonts
Modern features include a newly enhanced XLR DI output, user biasing, speakOn^® outputs, and spring-loaded side handles
Specially sourced and matched Ampeg Super Valve^TM 6550 tubes
Not a reissue—the ultimate SVT for today

YOU ASKED FOR IT

From well-informed amateurs to elite professionals, no amp enjoys as passionate a fan base as the Ampeg SVT. For this new SVT, Ampeg surveyed its loyal customers to ensure that the design met and surpassed what’s on their wish lists. While each generation of the SVT has its faithful, Ampeg designed the Heritage 50th Anniversary SVT to satisfy even the most discerning SVT aficionados. It’s the SVT everyone has been asking for.

SPECIFICATIONS

Preamp Tubes: 5 x 12AX7
Driver Tubes: 1 x 12AX7, 2 x 12AU7
Power Amp Tubes: Ampeg Super Valve (6 x 6550)
Output Power Rating: 300W RMS minimum continuous @ <5% THD into @ 2 or 4
Signal-to-Noise Ratio: (20 Hz – 20 kHz) 75 75 dB (20 Hz - 20 kHz)
Maximum Gain: 78 dB @ 1 kHz –3 dB @ 20 Hz & 15 kHz
Tone Controls
Channel One: Voiced after original 1969 "Blue Line" SVT (jumpable)
Channel Two: Voiced after mid 70's Magnavox era SVT (jumpable)
Bass: +12/-12 dB @ 40 Hz
Midrange: +10/-20 dB @ 220 Hz, 450 Hz, 800 Hz, 1.6 kHz, or 3 kHz
Treble: +15/–20 dB @ 4 kHz
Ultra Lo: +2 dB @ 40 Hz, -10 dB @ 500 Hz
Ultra Hi: +9 dB @ 8 kHz

IDEAL CABINETS

Heritage HSVT-810AV
Classic SVT-810AV
Classic SVT-212AV
Classic SVT-112AV

View full product details »

Ampeg Micro VR 200W Bass Amlifier Head -Blue

Ampeg

Sold Out $ 471.18

Don't be fooled by its diminutive appearance; the Ampeg Micro-VR is a compact powerhouse fully capable of pumping its 200W of genuine Round Sound into myriad live and recording situations. The portable, powerful solid-state bass amp head is a pleasant surprise from the second you lay eyes on it to the moment its indisputable Ampeg tone hits your ears.

FEATURES

Boasts 200W of power
Ultracompact construction

SPECS

200 Watts
Solid-state preamp
MOSFET power amp
Balanced XLR output
Headphone out, Aux in
Switching power supply
9.9 lb (4.5 kg)

View full product details »

Ampeg PF-50T Bass Amplifier Head

Ampeg

$ 999.99 $ 1,459.98

The legendary tone and portability of the all-tube Ampeg Portaflex amplifiers is faithfully reproduced in the PF-50T. This all-tube Portaflex head provides a harmonically rich and studio-worthy 50 watts of pure Ampeg tone to satisfy the most discerning bass player. Featur ing simple user-adjustable bias adjustment for easy tube replacement and pre-amp and transformer balanced direct outs for maximum versatility. Plus, no speaker load is required for silent recording or even use as a dedicated tube DI. Pair it with the PF-112HLF for the ultimate compact all-tube bass rig.

FEATURES

RMS power output:50W @ 4 or 8 ohms
Preamp: All-tube [2] x 12AX7
Power amp: All-tube [1] x 12AU7, [2] x 6L6
0db and -15db inputs
Tone controls: Bass, Mid, Treble
Mid-tone control: 5-position
Ultra Hi/Lo boosts
Input gain control
Preamp balanced line out

Pre/Post EQ
Ground lift

Transformer balanced line out

Ground lift

User adjustable bias control
Dimensions (H x W x D inches):

7.3 x 13.9 x 10.4 in
185 x 353 x 264 mm

Weight: 19.4 lb / 8.8 kg

View full product details »

Ampeg Rocket Bass 108 30W Bass Combo Amp - Black and Silver

Ampeg

$ 199.99 $ 259.98

The Ampeg Rocket Bass 108 amp is a high-performance amp with 30 watts of power packed into a portable cabinet. It features a 3-band EQ and an overdrive circuit, expanding the tonal possibilities. An auxiliary input makes it easy to jam to external audio sources; a headphone out keeps the noise levels down for the neighbors. The RB 108 is an ideal combo for players seeking a practice amp for bass with more than just basic features.

Main Features

30W, 1 channel
Solid-state amplifier
3-band EQ, Super Grit overdrive, Headphone out, auxiliary in
1x8 speaker

Lightweight and Powerful

Weighing only 23 lb., it's a cinch to lift the Rocket Bass and carry it from the bedroom to the garage, or wherever you want to play. The solid-state power section is 30 watts, more than enough for practice through the efficient 8" speaker.

Super Grit Technology/3-band EQ

Clean tone is great for Sunday morning jam sessions, but when it’s time to kick it up a notch, the Rocket Bass is ready. The Super Grit overdrive provides more punch, and the 3-band EQ allows further sonic sculpting to dial in a variety of bass tones.

Practice Anytime

Playing a musical instrument requires a lifetime of practice, but when others are around, it can be difficult. Fortunately, the RB 108 has a headphone output for silent play. The auxiliary input connects to any external audio source, making it possible to jam along with any band.

Vintage Style

Ampeg first made its mark in 1960 with the introduction of the groundbreaking Portaflex bass amp. The Rocket Bass 108 fits into the family with its vintage-style diamond checkerboard Tolex covering and silver grille cloth.

30-watt 1x8 combo
Vintage styling with modern features
Ampeg Legacy preamp
Super Grit Technology (SGT^™) overdrive
0dB and -15dB inputs
Auxiliary input and headphone output
23 lbs. (10.5 kg)

View full product details »

Ampeg Rocket Bass 110 Bass Combo Amplifier - Black / Silver

Ampeg

Sold Out $ 391.98

RB-110

The 50-watt RB-110 is an ideal amp for practicing and playing small venues. Classic 3-band EQ and the new Super Grit Technology^™ overdrive make it easy to dial in legendary Ampeg tone. Plus, an auxiliary input lets you play along with external audio, while a headphone output ensures you’ll be able to practice whenever you like without disturbing others. An XLR output provides a professional connection to a P.A. or recorder.

50-watt 1x10 combo
Vintage styling with modern features
Ampeg Legacy preamp
Super Grit Technology (SGT^™) overdrive
0dB and -15dB inputs
Auxiliary input and headphone output
XLR direct output
22.5 lbs. (10.2 kg)

View full product details »

Ampeg Rocket Bass 115 Bass Amp Combo - Black/ Silver

Ampeg

$ 559.99 $ 727.98

RB-115

The 200-watt RB-115 is an exceptional gigging and recording amplifier with a custom 15" Eminence^® speaker. Classic Ampeg 3-band EQ and Ultra Hi/Ultra Lo switches combine with the new Super Grit Technology^™ overdrive circuit to deliver legendary Ampeg tone. Additional features include an auxiliary input, a headphone output, an effects loop, an extension speaker output, and an XLR output that provides a professional connection to a P.A. or recorder.

200 watts
15" Custom Eminence speaker
Ampeg Legacy preamp with 3-band EQ
Footswitchable SGT^™ overdrive
Auxiliary input and headphone output
Effects loop
Extension speaker and XLR direct outputs
34 lbs. (15.45 kg)

View full product details »

Ampeg Rocket Bass 210 500W Bass Combo Amplifier - Black/Silver

Ampeg

$ 659.99 $ 923.98

The Ampeg Rocket Bass 210 amp is a high-performance amp that packs 500 watts of power into a portable cabinet. It features a 3-band EQ, an overdrive circuit and an effects loop to expand the tonal possibilities, while an XLR output directly connects to a PA or recorder. An auxiliary input makes it easy to jam to external audio sources, and a headphone out keeps the noise levels down for the neighbors. Containing dual 10” Custom Eminence speakers plus an HF horn, the RB 210 is the ideal combo for the gigging bassist.

Main Features

500W
Solid-state amplifier, 3-band EQ, Super Grit overdrive (footswitch-capable), effects loop
XLR out, headphone out, auxiliary in
Dual 10" Eminence speakers, high-frequency horn

Powerful and Lightweight

Weighing only 39 lb., it's easy to move the Rocket Bass 210 from the bedroom to the garage, or into the van for the next gig. The solid-state power section delivers 500 screaming watts. Dual 10" custom Eminence speakers and a mutable high-frequency horn spread your sound to rock the house or the whole stage.

Super Grit Technology/3-band EQ

Clean tone is great for Sunday morning jam sessions, but when it’s time to kick it up a notch, the Rocket Bass is ready. The Super Grit overdrive provides more punch and, combined with the 3-band EQ and Ultra Hi/Ultra Lo switches, allows further sonic sculpting to dial in a variety of bass tones. Pedal overdrive just doesn’t compare to authentic amp overdrive, and the Rocket Bass is as genuine as they come.

Practice on Your Own Schedule

Playing a musical instrument requires a lifetime of practice, but when others are around, it can be difficult. Fortunately, the RB 210 has a headphone output for silent play. The auxiliary input connects to any external audio source, making it possible to play along with any band. An XLR out makes it easy to plug in to the board, or plug in an external cabinet with the extension speaker out.

Vintage Style

Streamlined ’60s style puts the focus right where it should be—on stellar bass tone. The Rocket Bass RB 210 features easily accessible top-mounted controls and a classic vintage design that sets the stage perfectly for laying down bass grooves from any era.

Features

500 watts
Dual 10" Custom Eminence speakers + HF horn
Ampeg Legacy preamp with 3-band EQ
Footswitchable SGT overdrive
Auxiliary input and headphone output
Effects loop
Extension speaker and XLR direct outputs
39 lb. (17.7 kg)

Specifications

500 watts
Dual 10" Custom Eminence speakers+ HF horn
Ampeg Legacy preampwith 3-band EQ
Footswitchable SGT overdrive
Auxiliary input and headphone output
Effects loop
Extension speaker and XLR direct outputs
39 lbs. (17.7kg

View full product details »

Ampeg SVT-4Pro Bass Amplifier Head

Ampeg

$ 1,849.99 $ 2,700.98

SVT-4 PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient 3U rackmount design. In the world of high performance bass amps, the Ampeg SVT-4 PRO has what it takes to define your sound.

The Ampeg^® SVT^® line of pro-level amps is synonymous with power and durability. The SVT-4PRO crystallizes this philosophy, delivering more performance, flexibility, and power than any other amp in its class.

In true SVT tradition, the SVT-4PRO is capable of a huge variety of must-have sounds at high volume over extended periods of time. To achieve this, Ampeg packed a ton of tone-sculpting into its burly 3U chassis, mating the extensive preamp with dual high-output Class AB power amps. In addition to Ampeg’s classic 5-position Midrange control, which allows you to dial in the center frequency of the peaking midrange filter, there’s shelving bass and treble filters, and—if that weren’t enough—nine bands of carefully chosen graphic EQ. You can even use the graphic EQ as a “second channel,” making an alternate sound as easy as a tap on a footswitch.

Thanks to its hybrid tube/solid-state design, the SVT-4PRO delivers signature fat and warm Ampeg Round Sound, plus the entire sonic palette that players of any stripe might need to get the job done.

300 watts x 2; 900 watts mono-bridged @ 8 Ohms
490 watts x 2; 1,200 watts mono-bridged @ 4 Ohms
600 watts x 2 @ 2 ohms
Defeatable Optocoupler limiters
1/4" and Neutrik^® speakON^® outputs
Bi-ampable with stereo/bridgeable power amps and variable 24dB/octave crossover
Onboard compressor with variable ratio (1:1–10:1)
9-band graphic EQ
39.6 lb (17.9 kg)

View full product details »

Ampeg V-4B Tube Bass Amplifier Head

Ampeg

$ 1,599.99 $ 2,335.98

The Ampeg V-4B 100W All-Tube Bass Head embodies the legendary tone of the classic V-4B in a portable, modern design perfect for today's players. From the unique chassis suspension system to the vintage rocker switches, the attention to detail is all there. Plus, with a careful selection of modern features like an integrated DI and a wide choice of speaker output options, we've ensured the flexibility and functionality you demand from a modern head. With the 100W V-4B, you get the sought-after tone of a fully-cranked Ampeg tube amp in a design that's less than half the weight of an SVT.

FEATURES

100W of all-tube Ampeg bass tone
Ultra Hi/Lo boost
3-band EQ (bass, midrange, treble)
3-position mid-range control

View full product details »

Ampeg Venture V7 Bass Head

Ampeg

Sold Out $ 1,049.98

VENTURE V7
GO ANYWHERE™

Ampeg Venture® Series amplifiers and cabinets deliver the modern style and features sought by contemporary bassists—continuing a tradition of innovation that stretches back to the dawn of the electric bass. The Venture V7 occupies the middle position of the three heads in the Venture Series and fits conveniently into a gig bag, a laptop bag, or the optional Venture carrying bag, making it an ideal head for the travelling bassist. The Venture V7 delivers 700 watts via its Class D power section—more than enough power to drive any of the Venture Series speaker cabinets or practically any other cab bassists may encounter on their travels.

FEATURES

● Legacy Preamp with 3-band EQ

● Sweepable Mids

● Ultra Hi/3-way Ultra Lo switches

● Footswitchable SGT Overdrive circuit with SVT and B15 voicing switch

● Onboard variable compressor

● Lightweight and compact

● 700 watts @ 4 ohms

● Effects loop with Mix control, XLR DI output, Aux input, Phones output

● Dual Neutrik® speakON® outputs

● Preamp Out/Power Amp In

View full product details »

Eden TN501 500W Bass Amp Head USED

Eden

$ 500.00

The Eden Terra Nova TN501 is designed to offer players the ability to travel light without compromising on the features they need to get great tone. The Terra Nova series delivers optimal tone delivery while keeping its amplifiers and enclosures as compact as possible.

The TN501 is great for rehearsal and small bars as well as having a great DI out for when you need to use the front of house system. Getting great sounds from your amplifier is simple using the semi- parametric mid section and Eden's proprietary enhance EQ sweep.

TN501 500W Bass Amp Head Specifications:

Power: 500W
Single channel
Two inputs: active, passive
Controls: 4-band EQ with semi-parametric mid controls, input gain, enhance, master, mute, compressor, boost
FX loop
XLR direct output
Tuner output
Aux. input
Headphone output
Dimensions: 3.1" x 12.75" x 6.9"
Weight: 5.3 lb.
Footswitch sold separately

**This Bass amp head was used for a year, it's in great condition**

View full product details »

Fender Adam Clayton ACB 50 Bass Amplifier - Black

Fender

$ 2,199.99 $ 2,948.00

Inspired by Adam Clayton, the Fender ACB 50 signature bass amplifier offers warm, harmonically rich tube tones that are perfect for the studio, club or arena stage. Featuring two distinctly different channels – a classic Fender mid-scooped sound and a more modern hi-fi, flat EQ tone, the ACB 50 achieves all the sounds you need in any musical situation.

Classic cosmetics, chrome panel and chicken head knobs replicate that classic Fender look that players around the world have come to love. The ACB 50 includes a lightweight Eminence® Neo 15” speaker that helps accentuate its fat, powerful sound and features an XLR line out to send that great tone to your home recording rig or front-of-house.

Model Number: 2248500000

FEATURES

Designed in collaboration with Adam Clayton of U2
50 watts
Preamp Tubes: (3) 12AX7 and (1) 12AT7
Output Tubes: (2) 6L6
Independent Channels – (2) Classic Fender Sound & Flatter Frequency Sound
15” Eminence neodymium speaker
Transformer-coupled XLR out with ground lift
Chrome Panel and chicken-head knobs
Ported enclosure with lightweight plywood

SPECS

General

SERIES: Artist Signature
COLOR: Black
AMPLIFIER TYPE: Tube
COUNTRY OF ORIGIN: MX

Electronics

CONTROL PANEL: Channel 1: Volume, Treble, Middle, Mid Frequency, Bass; Channel 2: Volume, Treble, Middle, Bass
INPUTS: Two - 1/4"
LINE OUT: Two - (One XLR and One 1/4")
CHANNELS: Two
VOLTAGE: 120V
WATTAGE: 50 Watts at 8 ohms

Hardware

CONTROL KNOBS: Black Chicken-Head Style Pointer
AMPLIFIER COVERING: Black Textured Vinyl
GRILLE CLOTH: Aged Silver
HANDLE: Molded Plastic Strap with Nickel-Plated Caps
REAR CONTROL PANEL: Ground Lift Switch

Speakers

SPEAKERS: One - 15" Fender® Special Design Eminence® Neodymium
TOTAL IMPEDANCE: 8 ohms

Tubes

POWER TUBES: 2 x 6L6
PREAMP TUBES: 3 x 12AX7, 1 x 12AT7

Measurements

PRODUCT DEPTH: 14" (35.5 cm)
PRODUCT HEIGHT: 23" (58.42 cm)
PRODUCT WIDTH: 24.25" (61.5 cm)
POWER TUBES: 2 x 6L6

Accessories

FOOTSWITCH: NA

Miscellaneous

POWER CABLE: IEC

View full product details »

Fender Bassman 800 Bass Amplifier Head - Black/Silver

Fender

$ 1,249.99 $ 1,696.00

Combining the best of authentic Fender bass sound with modern power, the Bassman 800 Head is an easily portable powerhouse with flexible, thunderous tone. Designed for the ultimate bass playing experience, it offers two versatile channels, classic good looks, and ultra-musical Fender tube tones—all in a lightweight chassis (only 17 lbs.) that mates perfectly with Bassman Pro Neo speaker cabinets to create a tonal monster.

Model #: 2249700000

Product Specs

General

Amplifier Type: Hybrid (Tube/Solid State)
Color: Black and Silver
Country Of Origin: MX
Series: Bassman® PRO

Electronics

Channels: Two - (Vintage and Overdrive)
Connection Type: IEC
Control Panel: Vintage: Volume, Bass (Pull Deep), Mid, Treble (Pull Bright); Overdrive: Gain, Blend, Volume, Bass (Pull Deep), Mid, Frequency, Mid Level, Treble (Pull Bright); Master (Pull Mute)
Controls: Vintage: Volume, Bass (Pull Deep), Mid, Treble (Pull Bright); Overdrive: Gain, Blend, Volume, Bass (Pull Deep), Mid, Frequency, Mid Level, Treble (Pull Bright); Master (Pull Mute)
Effects: Tube Overdrive
Effects Loop: 1/4" - (Preamp Out, Power Amp In)
Inputs: Two - (1/4", Input 2 operates at -6dB)
Line Out: One - (XLR with Ground Lift, Level Control, and Pre/Post EQ Switch)
Voltage: 120V
Wattage: 800 Watts RMS output at 4 ohms

Hardware

Amplifier Jewel Red Jewel
Cabinet Material: 7-Ply 5/8" Meranti Plywood
Control Knobs: Vintage-Style Skirted Black Plastic
Front Panel: Black
Grille Cloth: Black and Silver Strand
Handle: Molded Rubber "Dog Bone" Style
Speaker Jack: Two Speakon 1/4" Combo Jacks

Miscellaneous

Power Cable: IEC

Speakers

Speakers: N/A
Total Impedance: 4, 8, or 16 ohms

Tubes

Power Tubes: NA
Preamp Tubes: 2 x 12AX7
Rectifier: Solid State

Accessories

Footswitch: 1-Button (Channel Select), P/N: 0994052000 (Included)

Measurements

Power Tubes: NA
Product Depth: 10.53" (26.7 cm)
Product Height: 8.6" (21.9 cm)
Product Width: 22.37" (56.81 cm)

View full product details »

Fender Rumble 100 (V3) Bass Amplifier - Black/Silver

Fender

$ 329.99 $ 427.26

For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.

The stylish Rumble 100 combo pumps 100 watts of pure Fender bass muscle and finesse. Lighter and louder than ever, it's built with great features including classic Fender styling, 12" Eminence® speaker, overdrive circuit, versatile three-button voicing and more. A must-have combo for any bassist.

Model #: 2370400000

Product Specs

General

Amplifier Type: Class-D
Color: Black and Silver
Country Of Origin: ID
Platform: Rumble
Series: Rumble™

Electronics

Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
Connection Type: IEC
Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
Effects Loop: 1/4" (Send/Return)
Inputs: One - 1/4"
Line Out: One - (XLR with Ground Lift)
Voltage: 120V
Wattage: 100 Watts at 8 Ohms

Hardware

Amplifier Covering: Black Textured Vinyl
Amplifier Jewel: Red LED
Cabinet Material: Lightweight Plywood
Control Knobs: Vintage-Style Radio
Front Panel: Painted Metal
Grille Cloth: Silver
Handle: Molded Plastic Strap with Nickel-Plated Caps
Speaker Jack: NA

Speakers

Speakers: One - 12" Eminence® Special Design
Total Impedance: 8 ohms

Tubes

Power Tubes: NA
Preamp Tubes: NA
Rectifier: NA

Miscellaneous

Power Cable: IEC

Accessories

Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)

Measurements

Power Tubes: NA
Product Depth: 14" (35.56 cm)
Product Height: 18.5" (47.0 cm)
Product Width: 16.5" (41.91 cm)

View full product details »

Fender Rumble 115 (V3) Bass Amplifier - Black/Silver

Fender

$ 399.99 $ 532.00

For bassists everywhere at all levels who prize a great-sounding 1x15" enclosure with textbook Fender punch, power and clarity, the Rumble 115 Cabinet delivers all that and great affordability. Re-voiced from previous versions to produce superior tonal detail and low-frequency translation, it also features an Eminence® speaker, premium high-end compression horn and Fender's magnetic Rumble head-attachment system, which magnetically holds the Rumble 200 and 500 heads securely in place atop it for a perfect pairing.

Model #: 2370900000

Product Specs

General

Series: Rumble™
Color: Black and Silver
Amplifier Type: Speaker Enclosure
Country Of Origin: ID
Platform: Rumble

Electronics

Inputs: NA
Power Handling: 600 watts program (300 watts continuous)

Hardware

Amplifier Covering: Black Textured Vinyl
Cabinet Material: Lightweight Plywood
Grille Cloth: Silver
Handle: Recessed Side-Mounted Steel Bar (2)
Casters: Pop-out Casters Included
Speaker Jack: One 1/4", One Speakon

Speakers

Speakers: One - 15" Eminence®-Designed Ceramic Magnet Speaker
Total Impedance: 8 ohms

Measurements

Product Depth: 14.5" (36.8 cm)
Product Height: 20.75" (52.7 cm)
Product Width: 23" (58.42 cm)

View full product details »

Fender Rumble 15 (V3) Bass Amplifier - Black/Silver

Fender

$ 89.99 $ 135.00

For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features. The diminutive Rumble 15 pumps 15 watts of pure Fender bass tone. Small but loud, it's built with great features including classic Fender styling, 8" speaker and three-band EQ, and is a great practice amp.

Model #: 2370100000

Product Specs

General

Amplifier Type: Solid State
Color: Black and Silver
Country Of Origin: ID
Platform: Rumble
Series: Rumble™

Electronics

Channels: One
Connection Type: IEC
Control Panel: Volume, Bass, Middle, Treble
Controls: Volume, Bass, Middle, Treble
Effects Loop: NA
Inputs: One - 1/4"
Line Out: NA
Voltage: 120V
Wattage: 15 Watts at 8 ohms

Hardware

Amplifier Covering: Black Textured Vinyl
Amplifier Jewel: Red LED
Cabinet Material: NA
Control Knobs: Vintage-Style Radio
Front Panel: Painted Metal
Grille Cloth: Silver
Handle: Molded Plastic Strap with Nickel-Plated Caps
Speaker Jack: NA

Miscellaneous

Power Cable: IEC

Speakers

Speakers: One - 8" Fender® Special Design
Total Impedance: 8 ohms

Tubes

Power Tubes: NA
Preamp Tubes: NA
Rectifier: NA

Accessories

Footswitch: NA

Measurements

Power Tubes: NA
Product Depth: 8" (20.3 cm)
Product Height: 14.96" (38 cm)
Product Width: 14.96" (38 cm)

View full product details »

Fender Rumble 200 (V3) Bass Amplifier - Black/Silver

Fender

$ 579.99 $ 752.00

For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.

On sight alone, you might not believe that the stylish diminutive Rumble 200 combo actually pumps 200 watts of pure bass muscle and finesse, but it does exactly that. Lighter and louder than ever, it's built with great features including classic Fender styling, 15" Eminence® speaker and compression horn, overdrive circuit, versatile three-button voicing and more.

Model #: 2370500000

Product Specs

General

Amplifier Type: Class-D
Color: Black and Silver
Country Of Origin: ID
Platform: Rumble
Series: Rumble™

Electronics

Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
Connection Type: IEC
Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
Effects Loop: 1/4" (Send/Return)
Inputs: One - 1/4"
Line Out: One - (XLR with Ground Lift)
Voltage: 120V
Wattage: 200 Watts at 4 ohms (with Extension Cabinet), 140 Watts at 8 ohms (Internal)

Hardware

Amplifier Covering: Black Textured Vinyl
Amplifier Jewel: Red LED
Cabinet Material: Lightweight Plywood
Control Knobs: Vintage-Style Radio
Front Panel: Painted Metal
Grille Cloth: Silver
Handle: Molded Plastic Strap with Nickel-Plated Caps
Speaker Jack: NA

Speakers

Speakers: One - 15" Eminence®-Designed Ceramic Magnet Speaker
Total Impedance: 8 ohms

Tubes

Power Tubes: NA
Preamp Tubes: NA
Rectifier: NA

Miscellaneous

Power Cable: IEC

Accessories

Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)

Measurements

Power Tubes: NA
Product Depth: 14" (35.56 cm)
Product Height: 23" (58.42 cm)
Product Width: 19" (48.3 cm)

View full product details »

Fender Rumble 210 Bass Amplifier Cabinet - Black/Silver

Fender

$ 499.99 $ 662.00

For bassists everywhere at all levels who prize a great-sounding 2x10" enclosure with textbook Fender punch, power and clarity, the Rumble 210 Cabinet delivers all that plus great affordability. Re-voiced from previous versions to produce superior tonal detail and low-frequency translation, it also features Eminence® speakers, a premium high-end compression horn and Fender's magnetic Rumble head-attachment system, which magnetically holds the Rumble 200 and 500 heads securely in place atop it for a perfect pairing.

Model #: 2380100000

Product Specs

General

Amplifier Type: Speaker Enclosure
Color: Black and Silver
Country Of Origin: CN
Platform: Rumble
Series: Rumble™

Electronics

Inputs: NA
Power Handling: 700 Watts (Program), 350 Watts (Continous) Handling Capability

Hardware

Amplifier Covering: Black Textured Vinyl
Cabinet Material: Lightweight Plywood
Grille Cloth: Silver
Handle: Recessed Side-Mounted Steel Bar (2)
Speaker Jack: One 1/4", One Speakon

Speakers

Speakers: Two - 10" Eminence® Ceramic Magnet
Total Impedance: 8 ohms

Measurements

Product Depth: 14" (35.56 cm)
Product Height: 23" (58.42 cm)
Product Width: 19" (48.3 cm)

View full product details »

Fender Rumble 25 (V3) Bass Amplifier - Black/Silver

Fender

$ 129.99 $ 182.00

For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features. The stylish Rumble 25 combo pumps 25 watts of pure Fender bass tone. Small but loud, it's built with great features including classic Fender styling, 8" speaker, overdrive circuit, mid-scoop contour switch and more. A great practice, at-home and coffeehouse-gig combo for any bassist.

Model #: 2370200000

Product Specs

General

Amplifier Type: Solid State
Color: Black and Silver
Country Of Origin: ID
Platform: Rumble
Series: Rumble™

Electronics

Channels: One - (with Selectable Overdrive and Contour)
Connection Type: IEC
Control Panel: Volume, Overdrive On/Off, Bass, Contour On/Off, Mid, Treble
Controls: Volume, Overdrive On/Off, Bass, Contour On/Off, Mid, Treble
Effects Loop: NA
Inputs: One - 1/4"
Line Out: NA
Voltage: 120V
Wattage: 25 Watts at 8 ohms

Hardware

Amplifier Covering: Black Textured Vinyl
Amplifier Jewel: Red LED
Cabinet Material: NA
Control Knobs: Vintage-Style Radio
Front Panel: Painted Metal
Grille Cloth: Silver
Handle: Molded Plastic Strap with Nickel-Plated Caps
Speaker Jack: NA

Speakers

Speakers: One - 8" Fender® Special Design
Total Impedance: 8 ohms

Tubes

Power Tubes: NA
Preamp Tubes: NA
Rectifier: NA

Miscellaneous

Power Cable: IEC

Accessories

Footswitch: NA

Measurements

Power Tubes: NA
Product Depth: 11" (27.94 cm)
Product Height: 15.25" (38.73 cm)
Product Width: 15.25" (38.73 cm)

View full product details »

Fender Rumble 40 (V3) Bass Combo Amplifier - Black/Silver

Fender

$ 229.99 $ 285.20

For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features. The stylish Rumble 40 combo pumps 40 watts of pure Fender bass tone. Light and loud, it's built with great features including classic Fender styling, 10" speaker, overdrive circuit, versatile three-button voicing and more. A great combo for any bassist.

Model #: 2370300000

Specs

General

Amplifier Type: Solid State
Color: Black and Silver
Country Of Origin: ID
Platform: Rumble
Series: Rumble™

Electronics

Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
Connection Type: IEC
Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
Effects Loop: NA
Inputs: One - 1/4"
Line Out: One - (XLR with Ground Lift)
Voltage: 120V
Wattage: 40 Watts at 8 ohms

Hardware

Amplifier Covering: Black Textured Vinyl
Amplifier Jewel: Red LED
Cabinet Material: Lightweight Plywood
Control Knobs: Vintage-Style Radio
Front Panel: Painted Metal
Grille Cloth: Silver
Handle: Molded Plastic Strap with Nickel-Plated Caps
Speaker Jack: NA

Speakers

Speakers: One - 10" Fender® Special Design
Total Impedance: 8 ohms

Tubes

Power Tubes: NA
Preamp Tubes: NA
Rectifier: NA

Miscellaneous

Power Cable: IEC

Accessories

Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)

Measurements

Power Tubes: NA
Product Depth: 12" (30.5 cm)
Product Height: 16.5" (41.91 cm)
Product Width: 16.5" (41.91 cm)

View full product details »

Fender Rumble 500 (V3) Bass Amplifier - Black/Silver

Fender

Sold Out $ 844.00

For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.

On sight alone, you might not believe that the stylishly diminutive Rumble 500 combo pumps an astounding 500 watts of pure bass muscle and finesse, but it does exactly that. Lighter and louder than ever, it's built with great features including classic Fender styling, dual 10" Eminence® speakers and compression horn, overdrive circuit, versatile three-button voicing and more. A must-have combo for the gigging bassist.

Model #: 2370600000

Product Specs

General

Amplifier Type: Class-D
Color: Black and Silver
Country Of Origin: ID
Platform: Rumble
Series: Rumble™

Electronics

Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
Connection Type: IEC
Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
Effects Loop: 1/4" (Send/Return)
Inputs: One - 1/4"
Line Out: One - (XLR with Ground Lift)
Voltage: 120V
Wattage: 500 Watts at 4 ohms (with External Speaker), 350 Watts at 8 ohms (Internal)

Hardware

Amplifier Covering: Black Textured Vinyl
Amplifier Jewel: Red LED
Cabinet Material: Lightweight Plywood
Control Knobs: Vintage-Style Radio
Front Panel: Painted Metal
Grille Cloth: Silver
Handle: Molded Plastic Strap with Nickel-Plated Caps
Speaker Jack: NA

Speakers

Speakers: Two - 10" Eminence®-Designed Ceramic Magnet
Total Impedance: 8 ohms

Tubes

Power Tubes: NA
Preamp Tubes: NA
Rectifier: NA

Miscellaneous

Power Cable: IEC

Accessories

Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)

Measurements

Power Tubes: NA
Product Depth: 14" (35.56 cm)
Product Height: 23" (58.42 cm)
Product Width: 19" (48.3 cm)

View full product details »

Fender Rumble 800 Combo Bass Amplifier - Black/Silver

Fender

$ 849.99 $ 1,146.00

Delivering powerful tone and classic style, the Rumble 800 has everything that Fender bass amps are famous for – and more. With new pro features and 800 watts of thunderous power, this lightweight bass combo is the ultimate rig for any stage or studio.

Joining the world’s best-selling line of bass amps, the Rumble 800 combo features impressive headroom and punch from its dual 10” Eminence® neodymium speakers and compression horn. With versatile 3-button voicing, a dynamic overdrive circuit and output power attenuation, the Rumble 800 delivers stunning power and sonic versatility for any style of music.

Model #: 2372100000

Product Specs

General

SERIES: Rumble
COLOR: Black
AMPLIFIER TYPE: Class-D
COUNTRY OF ORIGIN: ID

Electronics

CONTROLS: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume, Full/Low Power Switch
INPUTS: One 1/4"
LINE OUT: One - (XLR with Ground Lift)
CHANNELS: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
VOLTAGE: 120V
WATTAGE: 800 Watts

Hardware

CONTROL KNOBS: Vintage-Style Radio
AMPLIFIER COVERING: Black Textured Vinyl
GRILLE CLOTH: Silver
HANDLE: Molded Plastic Strap with Nickel-Plated Caps

Speakers

SPEAKERS: Two - 10" Custom-Designed Eminence® Neodymium
TOTAL IMPEDANCE: 8 ohms

Measurements

DIMENSIONS: 18.20x22.90x27.70 IN

Accessories

FOOTSWITCH: 1-Button Footswitch Included

View full product details »

Fender Rumble 800 HD Bass Amplifier Head - Black

Fender

$ 749.99 $ 922.00

The Rumble 800 Head is ideal for almost any genre of music, and at 800 watts, it has power to spare. The super-simple control interface makes it easy to dial-in the right bass tone for any gig. Its pure low-end and high-quality tone-shaping tools will please any bassist who desires a high-powered, lightweight rig. Like all Fender bass amplifiers, the Rumble 800 Head delivers thick, natural tone that sits perfectly in your live or studio mix. Includes footswitch and padded carrying bag.

Model #: 2372000000

Product Specs

General

SERIES: Rumble™
COLOR: Black
AMPLIFIER TYPE: Class-D
COUNTRY OF ORIGIN: ID

Electronics

CONTROL PANEL: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
INPUTS: One - 1/4"
AUXILIARY INPUT: 1/8 in (3.5 mm) Stereo
HEADPHONE JACK: 1/8" Stereo
LINE OUT: One - (XLR with Ground Lift and Pre/Post EQ Switch)
CHANNELS: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
EFFECTS LOOP: 1/4" (Send/Return)
CONNECTION TYPE: 1/4"
VOLTAGE: 120V
WATTAGE: 800 Watts

Hardware

CONTROL KNOBS: Ivory Soft Touch Radio Knobs
AMPLIFIER COVERING: Black Metal
CABINET MATERIAL: Tooled Metal
GRILLE CLOTH: NA
HANDLE: None
AMPLIFIER JEWEL: Red LED
SPEAKER JACK: Two Speakon 1/4" Combo Jacks

Speakers

SPEAKERS: N/A
TOTAL IMPEDANCE: 2, 4 or 8 Ohms (Switchable)

Measurements

PRODUCT DEPTH: 7.5" (19 cm)
PRODUCT HEIGHT: 2.75" (7 cm)
PRODUCT WIDTH: 13.5" (34.3 cm)

Accessories

FOOTSWITCH: 1-Button (Channel Select), P/N: 0994052000 (Included)

Miscellaneous

POWER CABLE: IEC

View full product details »

Fender Rumble Studio 40 Bass Combo Amplifier - Black

Fender

$ 399.99 $ 597.99

If there’s one thing Fender knows, it’s inspirational tone. Combining our hard-earned expertise with feedback from players around the world and brand-new technology, we created the Rumble Studio 40 digital bass amplifier. Perfect for rehearsing and recording, the Rumble Studio 40 harnesses the potent processing power of our GT engine to deliver a studio’s worth of realistic bass amp and effects models. Create your own sound and get inspired with over 15 amp models and 40 effects—all controllable via Bluetooth and the exclusive Fender Tone app.

Model #: 2376000000

Product Specs

General

Amplifier Type: Digital
Color: Black
Country Of Origin: CN
Series: Rumble™

Electronics

Auxiliary Input: 1/8 in (3.5 mm) Stereo
Channels: One
Connection Type: IEC
Connectivity: Bluetooth
Control Panel: Gain, Bass, Middle, Treble, Master, Three Layer Buttons, Encoder, FX Button, Save Button, Menu Button, Tap Button
Controls: Gain, Bass, Middle, Treble, Master, Three Layer Buttons, Encoder, FX Button, Save Button, Menu Button, Tap Button
Effects: More than 15 amp models, more than 40 effects
Effects Loop: 1/4" (Mono Send/Stereo Return)
Headphone Jack: 1/8" Stereo
Inputs: One - 1/4"
Line Out: Two - (Balanced XLR, Configurable as Mono PRE/POST or Stereo)
Looper: 60-Second Looper (Requires Optional MGT-4 Footswitch - P/N 0994071000)
Voltage: 120V
Wattage: 40 Watts at 8 ohms

Hardware

Cabinet Material: Lightweight Plywood
Control Knobs: Aged White Plastic
Front Panel: Black
Grille Cloth: Black
Handle: Molded Plastic Strap with Black Powder Coated Caps

Miscellaneous

Power Cable: IEC

Accessories

Footswitch: 4-Button (MGT-4 Preset/FX Switching and Looper), P/N: 0994071000 (Not Included)

Measurements

Dimensions: 15.40x20.00x20.50 IN
Product Depth: 12" (30.5 cm)
Product Height: 16.88" (42.9 cm)
Product Width: 16.5" (41.91 cm)

Speakers

Speaker Wattage: 40 Watts
Speakers: One - 10" Fender® Special Design
Total Impedance: 8 ohms

View full product details »

Bass Amplifiers

Ampeg Heritage 50th Anniversary SVT Bass Amp Head

YOU ASKED FOR IT

SPECIFICATIONS

IDEAL CABINETS

Ampeg Micro VR 200W Bass Amlifier Head -Blue

Ampeg PF-50T Bass Amplifier Head

Ampeg Rocket Bass 108 30W Bass Combo Amp - Black and Silver

Main Features

Lightweight and Powerful

Super Grit Technology/3-band EQ

Practice Anytime

Vintage Style

Ampeg Rocket Bass 110 Bass Combo Amplifier - Black / Silver

RB-110

Ampeg Rocket Bass 115 Bass Amp Combo - Black/ Silver

RB-115

Ampeg Rocket Bass 210 500W Bass Combo Amplifier - Black/Silver

Main Features

Powerful and Lightweight

Super Grit Technology/3-band EQ

Practice on Your Own Schedule

Vintage Style

Features

Ampeg SVT-4Pro Bass Amplifier Head

Ampeg V-4B Tube Bass Amplifier Head

Ampeg Venture V7 Bass Head

VENTURE V7GO ANYWHERE™

FEATURES

Eden TN501 500W Bass Amp Head USED

TN501 500W Bass Amp Head Specifications:

Fender Adam Clayton ACB 50 Bass Amplifier - Black

Fender Bassman 800 Bass Amplifier Head - Black/Silver

Miscellaneous

Fender Rumble 100 (V3) Bass Amplifier - Black/Silver

Miscellaneous

Fender Rumble 115 (V3) Bass Amplifier - Black/Silver

Fender Rumble 15 (V3) Bass Amplifier - Black/Silver

Miscellaneous

Fender Rumble 200 (V3) Bass Amplifier - Black/Silver

Miscellaneous

Fender Rumble 210 Bass Amplifier Cabinet - Black/Silver

Fender Rumble 25 (V3) Bass Amplifier - Black/Silver

Fender Rumble 40 (V3) Bass Combo Amplifier - Black/Silver

Fender Rumble 500 (V3) Bass Amplifier - Black/Silver

Miscellaneous

Fender Rumble 800 Combo Bass Amplifier - Black/Silver

Fender Rumble 800 HD Bass Amplifier Head - Black

Fender Rumble Studio 40 Bass Combo Amplifier - Black

Miscellaneous

VENTURE V7
GO ANYWHERE™