Effects
BBE 427 Distortion Guitar Effects Pedal
$ 115.99
The 427 is the modern muscle car of distortion pedals, with a big, meaty tone that's ready to kick ass. Another Paul Gagon creation, 427 builds on his experience crafting pedals for the gods of rock, but this one's got a distinctly American voice.
427 fires up with a potent variation of Gagon's proven LED-based distortion circuit as used in the BBE Blacksmith, with the power flowing to a sweepable EQ (CSEQ) section inspired by an early '70s Big Muff Pi and optimized for maximum flexibility.
On a mission to raise hell on rock-and-roll streets from New York to L.A., 427 delivers more raw power than yesteryear's muscle with better handling. With a beefy mil-spec circuit board sporting big, fat signal traces, 1% metal-film resistors and high-voltage poly caps, 427 is engineered to be deliver rock-solid performance and never leave you stranded. And when you aren't in the mood to lay down serious rubber, 427's true hardwire bypass lets your tone slip by without so much as angry glance from the tone police.
FEATURES
- Gain, level and continuously-sweepable EQ tone control
- LED-based gain circuit for smooth, high-output distortion
- 1MEG Ohms input impedance for proper pickup loading
- 10kOhms output impedance when engaged
- 1% metal-film resistors for consistency
- High-voltage poly caps for better tone
- Military-spec circuit board for reliability
- Blue status LED for high visibility and low power consumption
- Easy access battery compartment
- True hardwire bypass
BBE G Screamer Guitar Effect Pedal
$ 169.99
The music of Gus G and his band Firewind can be described as melodic, soaring and punishing - in short, metal masterpieces. But just as Gus is shaping the bleeding edge of metal, he is deeply passionate about its roots, as evidenced by his scoring the coveted gig as guitarist for Ozzy Osbourne.
Gus' gear reflects his passion, inspired by the classics and updated for a new level of sophistication and musical expression. BBE stompboxes share his ethos, born out of respect and appreciation for the classics while pushing forward, evolving the breed. Gus' new G Screamer signature overdrive is a thundering example. For years, the BBE Green Screamer was Gus' overdrive pedal of choice. But working closely with BBE's legendary mastermind Paul Gagon, Gus has now dialed in his tone still more, for solos that power his vision for the modern metal realm:
"BBE's Green Screamer is the one pedal I always had to have with me. When I'm soloing, the Green Screamer gives me that extra kick I need, a great combination of meaty gain and harmonics that drive my amp's tubes harder for a really thick, punishing tone. But it's not just an old school wall of distortion. It's complex and sophisticated, never ragged.
"The Green Screamer was working great for me, but I had ideas about how to make it even better for my tone. Paul Gagon and I collaborated and we modified the input driver to the distortion circuit so that more lower-mid harmonics are focused where I want them. Now my new G Screamer pedal lets me drive even more harmonics, and they're focused right where I need them to be for a cleaner, tighter distortion. The G Screamer delivers explosive power with precision. It's my new weapon."
- Gain, level and tone controls
- Modified classic sequential-diode distortion circuit for focused tone
- 1mOhms input impedance for proper pickup loading
- 10kOhms output impedance when engaged
- 1% metal-film resistors for consistency
- High-voltage poly caps for better tone
- Military-spec circuit board for reliability
- Blue status LED for high visibility and low-power consumption
- Easy access battery compartment
- True hardwire bypass
- 5-year warranty
Blackstar Dept. 10 Amped 1 Guitar Amp In A Compact Pedal
$ 441.99 $ 680.00
AMPED 1 is a professional 100 Watt guitar amp in a compact pedal. It turns any pedalboard, modeller, or multi-effector into a performance ready amp and ensures you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.
- 100W guitar amp in a compact pedal.
- Turns any pedalboard, modeller, or multi-effector into a performance ready amp.
- The power amplifier’s unique, high-headroom design delivers maximum power and optimum tone with any cabinet set-up at 8 or 16 Ohms.
- Response control delivers five distinctly different authentic power valve responses – KT88, 6L6, EL34, 6V6, EL84. Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp. The Linear response offers transparent power amplification, used in combination with the Flat voice when pairing your AMPED 1 with an external amp modeller.
- Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, and XLR D.I. for live use.
- Effects loop (series or parallel), 2x 9V DC outputs and MIDI control for easy integration into your pedalboard or rig.
- Includes CabRig, our next-generation DSP speaker simulator that reproduces the sound and feel of a mic’d up guitar cab in incredible detail. Deep-dive using the accompanying free Architect software and capture the incredible tones via USB / XLR out.
- Power Reduction switch allows you to select 100 Watts, 20 Watts or 1 Watt to easily get the perfect balance of power and response for any situation from studio to stage.
- Studio quality reverb with ‘freeze’ effect.
- Footswitchable Preset.
Boss BC-1X Bass Compressor Effects Pedal
$ 199.99 $ 272.00
Intelligent multiband compression for dynamic players.
- Pedal switch
- THRESHOLD knob
- RATIO knob
- RELEASE knob
- LEVEL knob
- CHECK indicator (Serves also as battery check indicator)
- GAIN REDUCTION indicator
- INPUT jack
- OUTPUT jack
- DC IN jack
- Alkaline battery (9V, 6LR61) or Carbon-zinc battery (9V, 6F22)
- AC adaptor (sold separately)
- Working Voltage: 18 V
- Current Draw: 90 mA
- Expected battery life under continuous use (These figures will vary depending on the actual conditions of use.): Alkaline: Approx. 3 hours
- 73 (W) x 129 (D) x 59 (H) mm
- 2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches
- (including battery)
- 450 g
- 1 lb
- Owner's Manual
- Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTE," and "Information")
- Alkaline battery (9V, 6LR61)
- (sold separately)
- AC adaptor: PSA series
Boss BD-2 Blues Driver
$ 99.99 $ 143.98
THE PERFECT TONE FOR BLUES
The BD-2 Blues Driver delivers the creamy, yet crunchy sound associated with great blues guitar. This popular pedal provides instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps.
Classic "blues" guitar tones with tube amp simulation
Warm distortion and overdrive
Responds to nuance and volume changes
AC adaptor or 9V battery operation
BOSS five-year warranty
Boss BD-2W Blues Driver Waza Craft Effects Pedal
$ 169.99 $ 232.54
Passionately designed by the master engineers at BOSS in Japan, the Waza Craft BD-2W delivers a premium stomp experience that fans of customized pedal tone will love. Crafted with an ear for highly refined sound, the BD-2W takes the classic Blues Driver grit to a new level with all-discrete analog circuitry. Standard mode captures the classic BD-2 tone while Custom mode delivers new body and sustain.
Since the beginning, the engineers at BOSS have been committed to achieving the finest guitar tones using any technology necessary, from old-school analog circuits to high-tech DSP. Continuing this enthusiastic spirit, we are pleased to introduce the new Waza Craft series. In Japan, "Waza" is the term for art and technique, and these special edition pedals proudly carry the Waza symbol to represent the pinnacle of BOSS design and craftsmanship. With final sound approval carried out by BOSS in Japan, the Waza Craft series brings you exceptional tone and touch response through
carefully-selected analog components, refined circuitry, and meticulous attention to detail.
FEATURES
- Special edition Waza Craft pedal delivers the ultimate BOSS tone experience
- Premium sound based on the classic BD-2 Blues Driver
- Newly revised, all-analog discrete amplifier circuit
- Standard and Custom sound modes
- Highly responsive to picking dynamics and volume changes
Boss BP-1W Booster Preamp
$ 169.99
Sonic Sweetener
The vintage BOSS CE-1 Chorus Ensemble and RE-201 Space Echo are legendary for their inspiring and influential effect sounds. But they’re also loved for their variable analog preamp circuitry, which instantly infuses any guitar tone with character, body, and richness. With the BP-1W, you can now access these two classic preamp tones in a premium Waza Craft pedal, along with a natural, clear voice that functions as a standard clean boost.
Features
- Waza Craft innovation for a premium analog tone experience
- Premium booster and preamp pedal with analog circuitry derived from legendary BOSS and Roland effects
- Versatile design with three selectable modes
- CE mode reproduces the bright, bell-like preamp sound of the BOSS CE-1 Chorus Ensemble
- RE mode reproduces the fat, warm preamp sound of the Roland RE-201 Space Echo
- NAT mode provides a natural clean boost with minimal sound coloration
- Gain knob controls the amount of saturation introduced into the signal
- Level knob for controlling the overall volume and driving the inputs of amps and other pedals
- Selectable standard or vintage input buffer with different tone and response characteristics
- Made in Japan
- BOSS five-year warranty
Boss CE-2W Chorus Waza Craft Guitar Effects Pedal
$ 219.99 $ 300.80
Launched in 1976, the CE-1 Chorus Ensemble was not only the world’s first chorus effect pedal, but also the very first BOSS pedal. Three years later, this inventive new sound was squeezed into the blue CE-2 Chorus, and chorus pedals have remained in the compact lineup ever since. Four decades on, the spacious modulated tone of the signature BOSS effect is still loved by musicians everywhere. In 2016, to celebrate the 40th anniversary of BOSS innovation, the original analog chorus sounds are now reborn with the Waza Craft CE-2W.
The CE-2W’s Standard mode faithfully recreates the classic CE-2 chorus sound, and adds an expansive new sound field with stereo output, which was unavailable in the mono CE-2. CE-1 mode fully reproduces the stereo chorus and vibrato sounds of the legendary CE-1, with the addition of variable chorus depth not available in the original pedal. To commemorate the birth of BOSS effects, the CE-2W is made exclusively in Japan, just as the original CE-1 and CE-2 were.
The CE-1 Chorus Ensemble, Released in 1976
In 1975, Roland debuted the “Dimensional Space Chorus” effect in the famous JC-120 Jazz Chorus amplifier. Released the following year by Roland’s newly formed BOSS division, the stereo CE-1 Chorus Ensemble made it possible for players to achieve the lush, spacious chorus and unique vibrato sounds of the Jazz Chorus with any amplifier setup. Housed in a robust metal chassis with an attached AC cord, the CE-1 contained the same analog chorus and vibrato circuitry from the original Jazz Chorus amp. While both of these effects sounded great in mono, the CE-1 offered up its real magic when used in stereo with two separate amps. This delivered an incredibly rich and immersive sound experience that was a true joy to play. The CE-2W provides an authentic reproduction of the CE-1’s analog sounds, with additional chorus adjustment now possible with a variable depth control.
The CE-2 Chorus, Released in 1979
Soon after the iconic BOSS compact pedal line was launched in 1977, guitarists started requesting the CE-1 chorus sound in this smaller, battery-powered format. In 1979, these demands were answered with the CE-2 Chorus. Specially designed for guitarists, the CE-2 offered a milder modulation compared to the CE-1, always keeping the guitar sound sharp and well defined. This refined chorus tone was an instant success, becoming the go-to sound for hit guitar tracks throughout the 1980s and beyond. In addition to authentically producing the CE-2’s original mono-only sound, the CE-2W makes the classic pedal’s soft modulated tone available in true stereo for the first time ever.
Proudly Made In Japan
The CE-1 and CE-2 represent the early days of BOSS’s longstanding dedication to innovation and quality, which remains stronger than ever at four decades and counting. Bringing together the cutting-edge technology of the time, savvy craftsmanship, and a devotion to helping musicians create great music, these landmark pedals embodied the spiritual mission for every BOSS product since. For this memorable 40th anniversary, the Waza Craft CE-2W Chorus is produced in Japan just like the original pedals, honoring the long, rich heritage of BOSS effects.
Waza Craft: The Art of Superior Tone
Since the beginning, the engineers at BOSS have been committed to achieving the finest guitar tones using any technology necessary, from old-school analog circuits to high-tech DSP. This enthusiastic spirit continues on with the Waza Craft series, which brings you exceptional tone and touch response through carefully selected analog components, refined circuitry, and meticulous attention to detail. In Japan, “Waza” is the term for art and technique, and these special edition pedals proudly carry the Waza symbol to represent the pinnacle of BOSS design and craftsmanship.
- Special edition Waza Craft pedal delivers the ultimate BOSS tone experience
- Standard mode provides a perfect reproduction of the legendary CE-2 sound
- CE-1 mode features chorus and vibrato, authentically reproducing the two stereo sound modes in the world’s first chorus pedal
- Includes new sounds not available in the original pedals, including CE-2 stereo output and variable depth for CE-1 chorus sounds
- Rate and Depth knobs provide fine sound adjustment in both pedal modes
- Premium all-analog circuitry with bucket-brigade (BBD) delay line
- Made in Japan to celebrate the 40th anniversary of BOSS effects
Boss CS-3 Compress/Sustain Pedal
Sold Out $ 150.46
IMPROVES YOUR OVERALL TONE
The CS-3 Compression Sustainer pedal compresses louder signals while boosting lower signals, providing smooth sustain without degrading the original sound quality. This is the perfect pedal for guitarists and bassists who want to sound their best.
Compact compression/sustainer pedal with high-quality circuitry
Compresses loud signals and boosts softer signals for a smooth overall sound
Onboard Level, Tone, Attack and Sustain controls for precise tonal shaping
Low-noise design for super-quiet operation
BOSS five-year warranty
Boss DD-3T Digital Delay Pedal
$ 139.99 $ 191.50
THE ICONIC DIGITAL DELAY, ENHANCED FOR MODERN PLAYERS
BOSS’s iconic DD-3 Digital Delay has been a pedalboard staple since 1986, loved everywhere for its great sound and simple operation. With the DD-3T, we’ve updated the classic stomp with enhanced functionality while fully retaining the original’s sound and control layout. It’s now possible to tap in delay tempos using the onboard switch or an external one, with your choice of three beat subdivisions. And the direct output jack has been moved next to the main output, providing easier connectivity for wet/dry setups.
- Updated version of the industry-standard DD-3, with enhanced functionality for modern players
- Ultra-easy operation for fast sound creation
- Delay time of 12.5 to 800 ms, divided into three ranges for quick setup
- Tap in tempos with the onboard pedal switch or an external footswitch
- Short Loop setting for creating phrase loops (same as the Hold function on the original DD-3)
- Direct output for sending dry and wet sounds to separate amps
- Main and direct output jacks now positioned on one side of the pedal
- BOSS five-year warranty
A Classic Through and Through
In continuous production for over three decades, the DD-3 has been the go-to delay stomp for countless players. Based on the DD-2—the world’s first digital delay pedal from 1983—the DD-3 is revered for its warm, round delay tone and simple controls that let you dial in sounds fast. The DD-3T’s sound circuitry and controls are identical to the DD-3, delivering every drop of that classic vibe you know and love.
Tap Tempo On Board
A key addition the DD-3T brings is tap tempo, an essential feature for creating the rhythmic delay effects at the heart of many guitar styles. In delay mode, hold the pedal switch for two seconds to toggle between bypass and tap operation. And for on-demand tap control, simply connect an external footswitch. When the DD-3T receives tap input, up to 800 ms of delay time is available, and the Mode knob sets the tap subdivision (quarter-note triplet, dotted-eighth note, or quarter note).
Direct Out for Wet/Dry Setups
The DD-3T features a direct output jack like the DD-3, but it’s been moved next to the main output jack to make connections easier. Plugging a cable into the direct out converts the main out to delay only, allowing you to send wet and dry signals to different amps for wide, immersive sounds. And if your amp or switcher has a parallel effects loop, just connect a dummy plug to the direct out to mute the dry sound for effect-only blending.
Hold That Loop
The original DD-3 (and DD-2 before) included a forward-thinking Hold function, which allowed you to capture a sound up to 800 ms long, play it continuously, and jam over the top. Many years later, BOSS further developed this creative concept with the successful Loop Station products, which helped spawn the new musical style of live looping. The DD-3T includes the same Hold function as the DD-3, but it’s been renamed “Short Loop” to reflect today’s common usage.
Nominal Input Level:
- -20 dBu
Input Impedance:
- 1 M ohm
Nominal Output Level:
- -20 dBu
Output Impedance:
- 1 k ohm
Recommended Load Impedance:
- 10 k ohms or greater
Bypass:
- Buffered bypass
Connectors:
- INPUT jack: 1/4-inch phone type
- OUTPUT jack: 1/4-inch phone type
- DIRECT OUT jack: 1/4-inch phone type
- TEMPO jack: 1/4-inch phone type
- DC IN jack
Boss DS-1 Distortion Pedal
$ 62.99 $ 86.18
The DS-1 Distortion is a true icon in the world of guitar effects. Introduced in 1978, BOSS’s first distortion pedal defined a bold new sound, delivering hard-edged attack and smooth sustain that’s been a staple of players for generations. The DS-1 is the top-selling BOSS compact pedal ever, and its original, unchanged design continues to inspire the creation of great music everywhere. The classic DS-1 tone is behind the signature sounds of numerous rock legends, and is ready to fuel your own signature sound today.
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
Controls
- Pedal switch
- TONE knob
- LEVEL knob
- DIST knobIndicator
- CHECK indicator (Used for indication of check battery)ConnectorsINPUT jack: 1/4-inch phone type
- OUTPUT jack: 1/4-inch phone type
- DC IN jack
- Power SupplyAlkaline battery (9 V, 6LR61) or Carbon-zinc battery (9 V, 6F22)
- AC adaptor (PSA series: sold separately)
- Current Draw: 10 mA
- Expected battery life under continuous useCarbon: Approx. 50 hours
- Alkaline: Approx. 80 hours
Boss DS-1W Distortion Pedal
$ 149.99
The Classic BOSS Distortion, Enhanced with Waza Craftsmanship
Introduced in 1978 among the earliest models in the BOSS compact series, the orange DS-1 redefined the sound of distortion and remains as influential today as ever. Its hard-edged attack and smooth sustain have made it the best-selling compact effect to date, and its distinctive tone is behind the signature sounds of a long list of rock and alternative icons. With the DS-1W, this legendary stomp joins other BOSS classics in the Waza Craft series, fusing the look and character of the original with a newly revised discrete all-analog circuit for expanded range and versatility.
Features
- Special edition Waza Craft pedal for the ultimate BOSS tone experience
- Newly revised two-stage gain circuit with discrete analog components
- Standard mode delivers the legendary sound of the original DS-1
- Custom mode provides fatter distortion tones with focused midrange and increased touch response
- Versatile Tone knob provides wide-ranging frequency control fine-tuned for each mode
- Two modes offer increased versatility when the pedal is used as a gain booster
- Premium buffer for clean and clear tone when bypassed
- BOSS five-year warranty
Timeless Distortion
The DS-1 instantly impacted the guitar world when launched, introducing a fresh new high-gain sound with aggressive, well-defined distortion rich in harmonic overtones. Over four-plus decades, leading players in hard rock, metal, grunge, and fusion genres have adopted the pedal for their core sounds. The classic edge of the DS-1 can be heard on countless famous tracks, both as a prime distortion for clean amp platforms and a boost to drive gained-up tube amps into controlled mayhem.
Two Modes, More Tonal Range
With its two modes and discrete all-analog circuit design, the DS-1W expands the DS-1 experience for a broader range of styles and applications. Call up Standard mode and play with the tight, hard-edged tone and singing sustain of the original pedal. Or switch on Custom mode for a bold new sound that takes the unmistakable DS-1 character to the next dimension.
Standard Mode: Classic DS-1 Sound
Standard mode on the DS-1W delivers the authentic sound of the original in every way. Its innovative two-stage gain circuit is a critical part of the fullness and definition that so many guitarists love about the DS-1. The versatile tone control affects low and high frequencies, simultaneously boosting and cutting each end of the frequency spectrum as the knob is turned. This lets you precisely dial in the sound for any application, from sharp rhythms and searing solos to maintaining low-end clarity when boosting amps and other drive pedals.
Custom Mode: Rich, Fat, and Dynamic
Custom mode presents a unique new distortion voice while retaining the singular DS-1 personality and edge. A thick, mid-focused character provides more fatness and cut to make your sound stand out in the mix, and the tone control is tuned to maximize the mode’s richness and presence. The available level has been increased by 6 dB, providing a wider range of gain boost for driving amps and pedals. And with more input sensitivity, you can conjure up all sorts of distortion colors with picking dynamics and volume control adjustments on the guitar.
Waza Craft: The Art of Superior Tone
Since the beginning, the engineers at BOSS have been committed to achieving the finest guitar tones using any technology necessary, from old-school analog circuits to high-tech DSP. This enthusiastic spirit continues with the Waza Craft series, bringing you exceptional tone and touch response through carefully selected analog components, refined circuitry, and meticulous attention to detail. In Japan, “Waza” is the term for art and technique, and these special edition pedals proudly carry the Waza symbol to represent the pinnacle of BOSS design and craftsmanship.
Boss FZ-1W Waza Craft Fuzz Effects Pedal
$ 199.99 $ 287.98
Fuzz was the first type of distortion pedal, and the retro sound of vintage units from the 1960s remains coveted by guitarists to this day. Realized through deep analysis of many legendary pedals and detailed Waza craftsmanship, the all-analog FZ-1W delivers the inspiring tone, feel, and vibe of classic fuzz in a reliable modern design. And like all Waza Craft pedals, the FZ-1W features premium components for top-quality performance and extended range for maximum tonal versatility.- Premium Waza Craft pedal for the ultimate BOSS tone experience
- Redefined fuzz sounds that combine classic tone and response with modern versatility and stability, realized through BOSS Waza innovation
- Vintage mode delivers a retro fuzz experience with aggressive tone, dynamic touch response, and extreme sensitivity to input volume
- Modern mode provides a fatter sound and more mid focus to suit a wider range of music styles
- Powerful Tone knob provides deep sound-shaping control tuned for each mode
- Consistent sound and reliable performance with silicon transistor circuitry
- High-quality buffer for clean and clear tone when bypassed
- BOSS five-year warranty
SPECIFICATIONS
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohms (Effect Off), 22 k ohms (Effect On)
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohms
- Recommended Load Impedance: 10 k ohms or greater
- Controls: Pedal switch, Mode switch, FUZZ knob, TONE knob, LEVELknob
- Indicator: CHECK indicator (Serves also as battery check indicator)
- Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type DC IN jack
- Power Supply: Alkaline battery (9 V, 6LR61 or 6LF22) or Carbon-zinc battery (9 V, 6F22), AC adaptor (PSA series: sold separately)
- Current Draw: 16 mA
- Expected battery life under continuous useAlkaline: Approx. 33 hours, Carbon: Approx. 14 hours
Boss FZ-5 Fuzz Pedal
$ 109.99 $ 150.46
A DISTORTED BLAST FROM THE PAST
The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ’60s and ’70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals, such as the Maestro FZ-1A, Fuzz Face and Octavia pedals, and kick ’em into overdrive with the FZ-5’s Boost knob. BOSS’ proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
Vintage sounds inspired by famous fuzz pedals of the ’60s and ’70s
Uses advanced COSM technology to recreate classic fuzz
BOOST control for more aggressive tone
Road-tough BOSS metal construction
BOSS five-year warranty
Boss GA-FC Foot Controller
$ 124.99 $ 169.98
LOOR CONTROL FOR ROLAND AND BOSS AMPS
If you want to keep your hands on your axe at all times, the GA-FC Foot Controller lets you drive Roland and BOSS amps from the floor. It allows for expansion as well: plug in optional expression pedals etc.
- Switch instantly between four channels and two routes of loops, reverbs, boost settings, etc.
- Simultaneously connect two expression pedals* for realtime control of volume and drive
Compatible products: Blues Cube Artist, Blues Cube Artist212, Blues Cube Tour, KATANA-100 MkII, KATANA-100/212 MkII, KATANA-HEAD MkII, KATANA-Artist MkII, Acoustic Singer Pro, Acoustic Singer Live, Nextone Artist, Nextone Stage, Nextone Special, WAZA Tube Amp Expander
*EV-5, FV-500L, and FV-500H are available as optional expression pedals for the GA-FC.
Boss GT-1000 Guitar Multi Effects Pedal
$ 1,189.99 $ 1,588.98
The BOSS GT-1000 is a premium amp and effects processor for guitarists. Designed for superior tone and exceptional musical response, the GT-1000 is the first-ever guitar multi-effects processor with 32-bit AD/DA and 32-bit/96 kHz internal processing. Driven by BOSS’s latest custom DSP engine and filled with cutting-edge BOSS technologies, the GT-1000 delivers class-leading performance in a compact and lightweight floor-based unit.
The GT-1000 includes a wide range of expressive amplifier types, newly built with the comprehensive Tube Logic design approach behind the acclaimed Katana, Waza, and Blues Cube amplifiers. Also featured is the groundbreaking Augmented Impulse Response Dynamics (AIRD) technology, realized with BOSS’s extensive research into the complex component interactions in classic guitar amplifiers. AIRD provides new levels of performance when using the GT-1000’s preamps with guitar amps and power amps, and previously unattainable realism in direct recording and full-range monitoring applications.
Inside the GT-1000 is an impressive selection of world-class effects, with BOSS’s Multi-Dimensional Processing (MDP) on board along with advanced modulation, delay, and reverb algorithms from the popular 500-series pedals. Users can configure amps and effects with numerous routing options and enjoy mute-free patch switching and delay/reverb carryover thanks to the ultra-speedy DSP engine.
The GT-1000 offers intuitive editing and powerful control with a large display, 10 assignable footswitches, and an onboard expression pedal with toe switch. Via built-in Bluetooth, users can edit and organize GT-1000 sounds wirelessly using dedicated apps for iOS and Android devices.
Features
- 32-bit AD/DA and 32-bit/96 kHz internal processing
- Tube Logic design
- Augmented Impulse Response Dynamics (AIRD) technology
- BOSS Multi-Dimensional Processing
- Large display
- 10 assignable footswitches
- Onboard expression pedal with toe switch
- Via built-in Bluetooth, users can edit and organize GT-1000 sounds wirelessly using dedicated apps for iOS and Android devices
Boss IR-2 Amp & Cabinet Emulator Effects Pedal
$ 199.99
When using a regular guitar amplifier, getting consistent tones in different performance situations can sometimes be a challenge. With the compact and versatile IR-2 in your rig, you’re always ready to deliver your signature sound directly to a house PA or recording setup when needed. Choose from 11 premium amp types paired with Celestion Digital IRs and instantly tweak your sound via simple controls. Use the mono/stereo loop for post-amp effects and plug in headphones for monitoring and quiet practice. And with onboard USB-C, you can easily interface with music software and load in your favorite cab IRs.- Premium amp emulator and cabinet IR loader in a BOSS compact pedal
- Exceptional audio quality with 32-bit floating-point processing and 96 kHz sampling rate
- Eleven different amp types and high-quality cab IRs from Celestion Digital
- Simple user interface with Level, Gain, Bass, Middle, and Treble controls
- Ambience effect with dedicated control
- Mono input and stereo outputs
- Mono/stereo loop for patching in mod, delay, and reverb effects after the amp emulation
- Headphones jack for practice
- USB-C for recording and audio playback via a computer or mobile device*
- Switch between two amp/cab tones with the pedal switch or an external footswitch
- Dedicated IR-2 IR Loader app (macOS/Windows) for loading your own cabinet IRs
- Amp and cabinet sections can be turned on/off independently for isolated use
- BOSS five-year warranty
Boss MD-500 Modulation Effect Pedal
$ 399.99 $ 540.38
The BOSS MD-500 Modulation features 32-bit/96 kHz AD/DA, deep programmability, and advanced features. It offers musicians unlimited creative capabilities with cutting-edge BOSS technology.The versatile MD-500 provides 12 modes and 28 different mod effects. Included are BOSS’s famous chorus and Roland’s legendary Dimension D, plus flanger, tremolo, phaser, vibe, slicer, ring mod, and more. Many effect modes include advanced Prime variations newly developed for the MD-500. Simul mode enables using two patches at once, while the Insert Loop function lets the user position mod effects around external pedals for the best sound.
Free editor/librarian software is available for the MD-500, allowing users to edit sounds and organize patches on a computer via USB.
Boss ME-90 Guitar Multi-Effects Processor
$ 349.99 $ 489.98
The BOSS ME series has been a favorite of performing guitarists for over three decades, combining multi-effects power with intuitive hands-on control for crafting tones in seconds. The ME-90 is the most advanced ME model to date, offering exceptional audio quality, flagship-grade AIRD amp models, IR loading, an effects loop, and more. Compact, battery-powered, and filled with premium BOSS tones, this versatile all-in-one processor makes it easy to build customized sound setups for every playing situation.
Standard Features
- All-in-one guitar processor with premium BOSS amps and effects
- Easy stompbox-style sound creation with an intuitive knob-based interface
- Exceptional audio quality with 24-bit AD and 32-bit DA conversion, 32-bit floating-point processing, and 48 kHz sampling rate
- Eleven onboard AIRD amp models and 60 different effects derived from the flagship GT-1000
- Dedicated amp section plus seven simultaneous effect categories with multiple types to choose from
- Edit parameters, swap out amp and effect types, and more with BOSS Tone Studio
- Eight multi-function footswitches and a newly redesigned expression pedal with toe switch
- 36 ready-to-play preset patches and 36 user patches for storing custom setups
- Manual mode for pedalboard-style operation and Memory mode for switching complete patch setups
- Rear-panel switch to optimize the audio outputs for a guitar amp or full-range sound system
- Load up to three user speaker IRs with the ME-90 IR Loader software for Windows/macOS
- Send/return loop for external pedals
- Light, durable design and colorful status LEDs
- Powered via four AA batteries or optional AC adaptor
- USB-C connector for communicating with BOSS Tone Studio and audio recording/playback with music production software
- Download and share ME-90 Livesets at BOSS Tone Exchange
- Optional Bluetooth® Audio MIDI Dual Adaptor allows you to edit sounds and stream audio from an iOS or Android mobile device
Specifications
- Sampling Frequency: 48kHz
- AD Conversion: 24 bits + AF Method, AF Method (Adaptive Focus)
- DA Conversion: 32 bits
- Processing: 32-Bit Floating Point
- Effects: 97 Types
- Memories: 36 (user) + 36 (Preset)
- Phrase Loop: 38 Sec. (Mono)
- Tuner Internal Detection: +/- 0.1 cent
- Maximum Input Level: Input: -10 dBu, Return: -10 dBu
- Maximum Input Level: Input: +7 dBu, Return +7 dBu
- Input Impedance: Input: 1 M ohm, Return: 1 M ohm
- Nominal Output Level: Output (L/Mono, R): -10 dBu, PHones: -10dBu, Send: -10 dBu
- Recommended Load Impedance: Output (L/Mono, R) 10 k Ohms or greater, Phones: 44 ohms or greater, Send: 10k ohms or greater
- Controls: Bank Down/Amp Switch, Bank Up/EQ switch, CTL/REV Switch, Memory/Manual Switch, 1/Comp Switch, 2/OD/DS switch, 3/MOD switch, 4/Delay switch, Pedal FX switch, Gt. Amp/line switch, power switch, Exit button, Write Button, CTL Button, Edit Button, Preamp type knob, Gain knob, Bass knob, Middle knob, Reverb knob, Comp/FX1 Type knob, Sustain/SENS/-10CT knob, Attack/Tone/-2OCT/Depth knob, Drive knob, Tone knob, Level knob, Mod Type knob, Rate/Key knob, Depth/Harmony knob, E.Level/Resonance knob, Delay Type knob, Time knob, Feedback knob, E.Level Knob, Output Level Knob, Pedal FX Type Knob, Pedal FX Pedal
- Display: 7 Segments, 2 Characters (LED)
- Connectors: Input Jack, Output (L/Mono, R) jacks, Send Jack, Return Jack: 1/4" Phone type, Phones Jack: Stereo Mini Phone type, USB Computer Port: USB Type-C/(R), Bluetooth Adaptor Connector: Dedicated Connector, DC In Jack
- Power Supply: Alkaline Battery (AA, LR6) x 4 or AC adaptor
- Current Draw: 190 mA
- Expected Battery Life Under Continuous: Alkaline Battery: Approximately 6.5 hours
- Accessories: Startup Guide, Alkaline Battery (AA, LR6) x 4
Boss MO-2 Multi Overtone
$ 149.99 $ 202.44
Expressive Compact with Distinctive, All-New Tones
Powered by Multi-Dimensional Processing technology (MDP), the MO-2 Multi Overtone uses your guitar’s harmonic characteristics to create a wide range of extraordinary new sounds.
-
Next-generation BOSS compact pedal with innovative Multi-Dimensional Processing, realized with proprietary technology and custom DSP
-
Impressive, harmonically rich sounds that compliment and enhance your straight guitar sound
-
Works well with both clean and distorted guitar tones, and also bass guitar
-
Ultra-responsive to volume changes and playing dynamics
-
Three different sound modes; wide range of tonal adjustment with simple controls
-
Mono or stereo output
-
Multi-Dimensional Processing for Superior Tone
-
Roland’s innovative Multi-Dimensional Processing (MDP) analyzes audio signals in many dimensions and applies ideal effects to each. By giving different dynamic changes relative to the input signal in real time, MDP can create bold, all-new sounds with a previously unattainable range of expression.
Boss NS-1X Noise Suppressor Effects Pedal
$ 199.99 $ 273.58
Powered by advanced BOSS MDP technology, the NS-1X intelligently silences noise without affecting the natural tone and playing feel of your guitar or bass. Reduction mode keeps your rig quiet in any general playing setup, while Gate mode provides ultra-fast performance to ensure that precision, high-gain riffs remain sharp and distinct. Versatile and easy to use, the NS-1X is an essential tool for defeating noise issues while practicing, performing, and recording.
SPECIFICATIONS
- Sampling Frequency: 48 kHzAD
- Conversion: 24 bits + AF method AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converter.
- DA Conversion: 32 bits
- Processing: 32-bit floating point
- Modes: 3 modes- GATE, REDUCTION, MUTE
- Nominal Input Level: INPUT, RETURN: -20 dBu
- Maximum Input Level: INPUT, RETURN: +7 dBu
- Input Impedance: INPUT, RETURN: 1 M ohm
- Nominal Output Level: OUTPUT, SEND: -20 dBu
- Maximum Output Level: OUTPUT, SEND: +7 dBu
- Output Impedance: OUTPUT, SEND: 1 k ohm
- Recommended Load Impedance: OUTPUT, SEND: 10 k ohms or greater
- Bypass: Buffered bypass
- Controls: MODE knob, DECAY knob, THRESHOLD knob, DAMP knob
- Pedal switch
- Indicator: CHECK indicator (Serves also as battery check indicator), REDUCTION indicator
- Connectors: INPUT jack: 1/4-inch phone type, RETURN jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, SEND jack: 1/4-inch phone type, DC IN jack
- DC OUT jack
- Power Supply: Alkaline battery (9 V, 6LR61)
- AC adaptor (PSA series: sold separately)
- Current Draw: 60 mA
- Expected battery life under continuous use
- Alkaline: Approx. 6.5 hours
- * These figures will vary depending on the actual conditions of use.
- AccessoriesLeaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”), Dry battery (9 V, 6LR61)Options (sold separately)AC adaptor: PSA series
Boss OC-5 Octave Pedal
$ 149.99 $ 205.20
The New Standard in Octave Pedals
Fusing classic BOSS octave tones with the latest tracking technologies, the BOSS OC-5 sets a new standard in octave pedal performance. Vintage mode provides a spot-on recreation of the legendary mono OC-2 from 1982, while Poly mode offers numerous enhancements for extended-range playing. And with the addition of an octave-up feature, a span of three octaves is now available for creative exploration. From fat, low mono sounds to octave-shifted chords and more, the OC-5 delivers the widest range, finest sound quality, and best playability in any octave stomp to date.
Standard Features
- The industry-standard octave pedal, updated with enhanced features
- Newly developed tracking technology provides more accurate response and natural feel with no latency
- Vintage mode faithfully reproduces the mono sound of the original OC-2
- Poly mode for chord playing; Range knob sets the note range where the effect is applied
- Lowest Range setting in Poly mode applies the octave effect to only the lowest note in a chord
- New octave-up effect, available on its own or blended with octave-down effects
- Mode switch optimizes the tracking engine for guitar or bass
- Direct out for wet/dry setups
- BOSS five-year warranty
OC-5 Octave Sound Tryout
Get interactive with our custom TonePedia player and explore hundreds of sound variations. Select your instrument, tweak and choose pedal settings.
*Use headphones and Google Chrome web browser for optimal experience.
High-Octane Octave Performance
Powered by the latest real-time processing technologies from BOSS, the OC-5 provides exceptional sound and playability for the most expressive octave experience ever. A key feature is the newly developed tracking engine, which delivers clean, accurate performance with no latency. The OC-5 also offers wider range and greater polyphonic capabilities than previous OC models, covering all your octave needs in one high-performance pedal.
Classic Tones with Vintage Mode
Introduced in 1982, the OC-2 was the world’s first modern octave pedal for guitar and bass. Still loved by players everywhere, the stomp’s warm-yet-present tone sits perfectly in a mix, and its characteristic voice can be heard in many famous songs. The OC-5’s Vintage mode brings you the OC-2’s iconic mono sound, coupled with improved response thanks to the new tracking engine. Dedicated level controls are provided for -1 and -2 octave effects and the direct sound, giving you quick access to an endless variety of sub-octave colors.
Enhanced Poly Mode
The OC-5 also features an evolved version of the smart Poly mode first introduced with the OC-3 Super Octave, letting you play full chords with octave effects. The variable Range knob restricts the effect to the lower notes on your instrument, perfect for playing octave bass lines alongside normal chords and melodies in the higher registers. And with the new tracking refinements, it’s even possible to isolate the octave effect to the bottom note in a chord—just turn the Range knob to the “Lowest” setting.
Extended Range with Octave Up
Another cool OC-5 enhancement is the new octave-up effect, which is available in both Vintage and Poly modes. Simply twist the dedicated +1 OCT knob to bring in the desired effect level. Use the octave-up effect on its own for faux 12-string sounds and unique solo tones, or blend it with the octave-down effects for extended chord voicings and super-fat leads.
Guitar/Bass Switch and Direct Out
The OC-5 lets you instantly optimize the performance of its tracking engine for either guitar or bass via a dedicated switch on the body of the pedal. And with the Direct Out jack, it’s easy to route dry and effect sounds to different destinations, such as two stage amps or discrete channels on a mixer or audio interface.
Boss OD-200 Hybrid Drive Pedal
$ 249.99 $ 349.98
SIMPLY SOPHISTICATED
With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit AD/DA, 32-bit internal processing, and 96 kHz sampling rate, plus support for additional control via external switches, an expression pedal, or MIDI.
The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analog/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There’s even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.
Version 1.1 Update: User Memory Expansion
The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.
The Version 1.1 update is available in the Downloads section for each 200 series pedal.
- Advanced hybrid design with analog and digital circuitry provides a huge range of drive tones from classic to modern
- Twelve primary drive modes plus 15 boost types with independent pre/post gain controls
- Selectable series or parallel boost structures for unlimited gain shaping
- Advanced gate section for eliminating noise and tightening high-gain tones
- Class-leading sound quality with 32-bit AD/DA, 32-bit floating point processing, and 96 kHz sampling rate
- Access 128 user setups from the panel or MIDI program change
- Recall consecutive memories plus real-time panel setting via footswitch or dedicated panel button
- Panel Lock function disables controls to prevent unwanted changes
- Customizable multi-function footswitches for bypass, boost, memory selection, and more
- Support for expanded control via external footswitches, an expression pedal, or MIDI
- Full MIDI I/O provided with mini TRS jacks (BMIDI-5-35 adaptor cable available separately)
- Micro USB jack for firmware updates
- Runs on PSA-series AC adaptor or three AA-size batteries
SPECIFICATIONS
Sampling Frequency:
- 96 kHz
AD/DA Conversion:
- 32 bits
Processing:
- 32-bit floating point
Drive Circuit:
- Analog + Digital
Modes:
- 12 modes
- OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ
Memory:
- 127 + Manual
Nominal Input Level:
- INPUT: -10 dBu
Maximum Input Level:
- INPUT: +7 dBu
Input Impedance:
- INPUT: 1 M ohm
Nominal Output Level:
- OUTPUT: -10 dBu
Maximum Output Level:
- OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT:
- 1 k ohms
Recommended Load Impedance:
- OUTPUT: 10 k ohms or greater
Bypass:
- Buffered bypass
Controls:
- ON/OFF switch, MEMORY/BOOST switch
- MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
- PARAM button, MEMORY button
Display:
- 7 segments, 3 characters (LED)
Indicator:
- PARAM indicator, MEMORY (MAN, 1--4) indicators
Connectors:
- INPUT jack, OUTPUT jack: 1/4-inch phone type
- CTL 1, 2/EXP jack: 1/4-inch TRS phone type
- MIDI (IN, OUT) jacks: Stereo miniature phone type
- DC IN jack
- USB port: USB micro B-type (program update only)
Power Supply:
- Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw:
- 220 mA
Expected Battery Life Under Continuous Use:
- Alkaline: Approx. 6 Hours
- * These figures will vary depending on the actual conditions of use.
Accessories:
- Owner's Manual
- Leaflet "USING THE UNIT SAFELY"
- Alkaline battery (AA, LR6) x 3
- Rubber foot x 4
Options (sold separately):
- AC adaptor: PSA-S series
- Footswitch: FS-5U
- Dual footswitch: FS-6, FS-7
- Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
- TRS/MIDI cable: BMIDI-5-35
SIZE AND WEIGHT
Width:
- 101 mm
- 4 inches
Depth:
- 138 mm
- 5-7/16 inches
Height:
- 63 mm
- 2-1/2 inches
Height (including rubber foot):
- 65 mm
- 2-9/16 inches
Weight:
- 600 g
- 1 lb 6 oz
Weight (including battery):
- 670 g
- 1 lb 8 oz
Boss OD-3 Overdrive
$ 109.99 $ 150.46
NATURAL OVERDRIVE WITH ENDLESS SUSTAIN!
Built in the tradition of the legendary BOSS overdrives, the OD-3 OverDrive pedal gives guitarists a greatly expanded range of smooth overdrive tones and improved response while staying true to the original.
Dual-Stage Overdrive Circuit offers a level of sustain and compression unmatched by any overdrive pedal
Increased dynamics yield a "bigger" sound than any previous BOSS overdrive pedal
Dynamic, non-muffled tones reminiscent of classic overdriven "stack" amps
Straightforward Drive, Tone and Level controls
BOSS five-Year Warranty
Specifications
- Nominal Output Level: -20dBu
- Input Impedance: 1 M ohm
- Nominal Output Level: -20dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10K ohms or greater
- Bypass: Buffered
- Controls: Drive knob, Tone knob, Level knob, Pedal switch
- Indicator: Check Indicator (Used for check battery)
- Connectors: Input Jack: 1/4" Phone Type, Output Jack: 1/4" Phone Type, DC in Jack
- Power Supply: Carbon Zinc Battery (9V) or Alkaline Battery (9V), AC Adaptor (PSA Series Sold Separately)
- Expected Battery Life Under Continuous Use: Carbon (34.5 Hours), Alkaline (56 Hours)
- Accessories: Leaflet, Carbon-Zinc Battery
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2025 Huber Breese Music. Powered by Shopify
