Effects

Tech 21 SansAmp Para Driver V2 DI Pedal

$ 249.00 $ 335.00

This floor version of our RPM rackmount provides the same detailed tone shaping possibilities for any signal source. It is particularly useful with acoustic, electric and bass guitars, and upright bass, either direct to a mixing console or with an instrument amplifier. The Para Driver DI gives your instrument a natural warmth and presence, as if miking it through a tube pre-amp. The SansAmp circuitry eliminates the harsh, unnatural harmonics of piezo pickups, while the Drive control offers some tasteful edge — just a little or over-the-top.

Version 2 has exactly the same tonality and functionality with the addition of two new features: Rumble Filter and Air. The Rumble Filter removes unwanted sub-sonic frequencies that cause boominess and audible handling noises associated with acoustic guitars.The Air button adds top-end clarity and sparkle to acoustics.

PARA DRIVER DI
FEATURES

Active tone controls with 12dB of cut or boost
Sweepable semi-parametric EQ
1/4-inch 4.7 megOhm instrument level input
1/4-inch and XLR outputs with selectable levels
Parallel, uneffected output to run a dry signal to a separate channel

View full product details »

Tech 21 SansAmp Programmable Bass Driver PBDR

Tech 21

$ 249.00 $ 398.00

Always thinking of our fat-stringed brethren, we had to make a 3-channel, programmable, rig-in-a-box for bassists who can’t get enough of a great thing. Like the TRI-A.C. for guitar, you get three hot tones right at your toetips. The all-analog circuitry features the same controls as its single channel predecessor: Drive, Bass, Treble, Presence, Blend and Level. Digital only in its programmability, you just tweak the knobs until you find a tone, double-tap on a footswitch, and it’s saved in that channel. It’s that simple. Three of your faves — to go!

FEATURES

Build your Bass Driver DI into a live rig with a Bass Power Engine 60, and run through the PA for extra power.
Boldly go live with just your Bass Driver DI straight into the PA.
Bounce into any studio with a Programmable Bass Driver DI and plug directly into the board.
BUILT-IN SPEAKER/CAB SIM: The 100% analog SansAmp Tube Amplifier Emulation technology encompasses the entire signal chain, from pre-amp to power amp to speaker simulation. An integral part of the circuitry, the SansAmp speaker simulation will complement any type of guitar or bass speaker cabinet system. You can also place an external IR after a SansAmp to give additional flavor if you so desire. The SansAmp speaker sim is designed and individually tailored for a smooth, even response as would be achieved by a multiply-miked cabinet –without peaks, valleys, and notches associated with single miking and many IRs.
While larger than our other SansAmp pedals, the Programmable Bass Driver DI still fits into a gig bag. Actual size: 7.25”L x 5.25”W x 2.25”H.
Even with its roadworthy all-metal construction, each unit weighs in at a mere 25 oz.
Operable via phantom power.
Operable with 9V alkaline battery (not included).
Optional DC power supply is available:

View full product details »

VooDoo Labs Sparkle Drive MOD Guitar Effects Pedal

VooDoo Labs

$ 199.99 $ 260.00

All the tones of the original Sparkle Drive plus three custom mods for punchy and modern to thick, singing lead tones!

The Sparkle Drive MOD overdrive effects pedal from Voodoo Lab delivers all the overdriven sounds of the original Sparkle Drive but with a twist. Using the MOD switch, you can select the stock 808-based circuit or instantly pick from three custom mods. Whether you need more gain, tighter bass response, a more-vocal midrange, or a thick and juicy lead tone, Sparkle Drive MOD gives you the tools to get there.

In Stock mode, you get the classic tube-style midrange grind that's great for blues or for boosting your solos. Mod 1 is the Lead circuit with extra gain, a thick and juicy bottom end, and smooth highs that are perfect for single-note melodies. Mod 2 delivers punchy, mid-cut rhythm tones thata re great for chunky rock power chords and funk. Mod 3 gives you the high-gain treatment with articulate highs and an aggressive bottom end.

Additional features include a unique Clean control that allows you to blend in a boosted direct signal restoring attack and feel. Switching is true bypass via a high-reliability gold-contact relay.

Features

Create multiple, layered amp sounds - one clean, one overdriven
Four unique overdrive/distortion circuits: Stock, Lead, Rhythm & High Gain
100% clean boost circuit with tons of output
True-bypass switching via gold-contact relay with LED
Hand built in the USA
5-year warranty

View full product details »

Wampler Ratsbane Pedal

Wampler

$ 149.97

Based on an infamous circuit from a classic 1980’s high gain distortion pedal, the Ratsbane is Brian’s answer to the countless requests he has received to build his interpretation of this much-loved design.

RATSBANE DISTORTION

If you are looking for a single pedal solution with multiple degrees of gain from light overdrive to full out saturated fuzz tones, then you’ll surely love the Ratsbane. The Ratsbane is based on a true benchmark sound amongst guitarists that has been heard on thousands of famous recordings.

The full, dynamic range, and sheer sonic force of this circuit is what makes it a true king amongst distortion pedals. Turn the distortion control all the way down for a deep but powerful gain booster. Crank it up and you will find rich harmonic overtones and a throaty, fuzz-like distortion. The “secret sauce” for this circuit has always been the filter control. Turn it counter-clockwise to cut straight through the mix with precision and high-frequency attack that lets your tone soar with absolute clarity. Turn it clockwise to filter the top end, for a warm, buttery, yet clear tone. This natural full-range distortion, mixed with its unique filter control, delivers a classic cranked tube-amp sound that crosses genres and generations of music.

In typical Wampler fashion, Brian improved the circuit’s flexibility by adding two new switches. The Gain switch offers three distinct choices. In the middle gives you the “stock” gain for this pedal. Flick it either right or left for 2 additional turbocharged gain stages you can play with. The left position offers a firm, yet smooth boost in gain, whereas the right delivers an insane level of creamy distortion. The Voice switch subtly alters the compression and clipping of this pedal. It tightens the distortion to be more manageable with greater levels of gain, while rolling back some of the fuzz qualities, to deliver a modern, high gain distortion.

THREE GAIN OPTIONS

Brian has incorporated some unique modifications into this circuit, easily accessed by the toggle switches. With the gain switch set in the center you get the classic circuit, flick it either right or left to get insane amounts of gain on tap.

CLASSIC AND MODERN TONES

Not content with just modifying the gain stages, Brian also added a voice switch which totally changes this circuit into a modern, higher gain style distortion. This pedal can cover boosted overdrive tones, full on fuzz, and modern searing distortion tones in one small package.

SWAP THE ENGINE

This circuit is based on a modern, and in our opinion more harmonically complex, operational amplifier IC, but we know there are some purists out there that will want to try it with an LM308 IC, so we put our “engine” in a socket to allow those adventurous DIY “modders” amongst you to have some fun. We don’t recommend it though and it shouldn’t be attempted by novices.

BUILT FOR FOREVER

Brian Wampler’s attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Ratsbane. We’re all tone-freaks, and we’re always trying new things, but we hope this pedal finds it’s forever home on your pedalboard, so we built it to last that long.

Built in the U.S.A.
High grade components picked for their superior sound and response
True bypass
9v – 18v power jack (no battery connector inside)
Power draw: between 2.5mA (9v) and 3.2mA (18v)
Five controls – Volume, Distortion, Filter rotary, plus 3 way Gain switch and 2 way Voice switch
Includes Wampler’s limited 5-year warranty
1.5″ x 3.5″ x 1.5″ (38.1mm x 88.9mm x 38.1mm) – height excludes knobs and switches

View full product details »

Yamaha FC3A Continuous Piano Style Sustain Pedal

Yamaha

$ 39.99 $ 70.00

Achieve Great Control of Your Keyboard!

The Yamaha FC3A is a piano-style damper pedal for use with Yamaha keyboards that support half-damper positions. Instead of a typical on/off type pedal the half-damper feature allows you to fine tune your sustain by varying the pressure on the pedal,, giving you great control of your performance much like an acoustic piano. A robust design with a 6-foot cable and a 1/4" plug assures the FC3A will be a long lasting addition to your keyboard rig. Get more command out of your Yamaha keyboard with the FC3A keyboard pedal.

Yamaha FC3A Half-damper Pedal Features: