Guitar Amplifiers
Peavey 2017 6505+ Guitar Amplifier Head USED
$ 749.99 $ 1,699.99
Named in celebration of Peavey's first 40 years, the 6505 Series is the undisputed go-to guitar amplifier for scores of rock, hardcore and metal bands for their raw tone, relentless power and road-proven reliability. The 6505 is still the unquestionable choice for an ever-expanding list of endorsers. The 6505 Plus features six 12AX7 preamp tubes and four 6L6GC power amp tubes, with presence and resonance controls and three-band EQ for taming their notorious tone. The 6505 Series is the undisputed go-to guitar amp series for scores of rock and metal bands due to their raw tone, relentless power and road-proven reliability. The 6505 is still the unquestionable choice for an ever-expanding list of endorsers.Features
- Six 12AX7 preamp and four 6L6GC power amp tubes
- Footswitchable Lead/Rhythm channel select
- Three-band EQ on each channel
- Resonance and Presence controls on each channel
- Pre Gain and Post Gain on each channel
- Footswitchable Crunch boost on Rhythm channel
- Bright switch on Rhythm channel
- Preamp output
- Effects loop
- Bias test point
- Footswitch included
- 120 watts RMS into 16, 8 or 4 ohm
- Weight Unpacked: 48.30 lb(21.908 kg)
- Weight Packed: 57.00 lb(25.855 kg)
- Width Packed: 13.25"(33.655 cm)
- Height Packed: 28.75"(73.025 cm)
- Depth Packed: 14"(35.56 cm)
This head is USED but is in "Like New" condition.
Mesa Boogie MK IIC+ Combo Guitar Amplifier Koa USED
Sold Out
This is a USED guitar amplifier in beautiful Koa wood. This amplifier has never been out on a gig. The grille is in perfect shape. There are a few scratches on the otherwise perfect Koa cabinet. This amp has had one owner who sent it to a certified Boogie specialist at Washington Music Center in Wheaton, MD and was updated to MK IIC+ specs. Also added during this modification were a switch to allow EL34 or 6L6 power tubes without re-biasing. Another switch is added to change from triode to pentode mode - this reduces the power slightly and gives more grind at lower volumes.
This amp screams.... it's got that amazing clean sound that these amps are known for. The distortion tone are unreal.
- Power: 60 Watts
- Speaker: original EV 12"
- Other Options: Reverb, 5 band E>Q>, 6L6/EL34 Mod, Pentode/Triode switch Mod
- Cabinet: Koa
- Grille: Cane
- Accessories: Footswitch, Flight Case, Cover
Marshall 2009 1960AHW 412 Guitar Cabinet USED
$ 1,100.00
- Hand soldered
- 4x12" cabinet
- 120W
- Mono
- 16 ohm
- Salt 'n' pepper grille
- Metal handles
- Reissue 30W Celestion G12H speakers
Line6 Spider 212 100 Watt Combo Guitar Amplifier USED
$ 399.99
In very good condition and good working order!- 6 Amp Models
- 7 Digital Effects with Smart Control and Tap Tempo
- 10 Factory Presets
- 18 Factory Presets w/Floorboard
- 4 User Programmable Channels
- 12 User Programmable Channels w/Floorboard
- 1/4 inch TRS Headphone & Direct Out
- 100 Watts (2 x 50) Stereo Power
- Mono speaker/ Stereo headphone & DI
- 2 X 12 inch combo
Kustom Dual 30RC 30W 1x10" 2-Channel Guitar Combo Amplifier USED
$ 149.99
Middling output with major tonal versatility!
The Kustom Dual 30RC 2-Channel Combo features lead and rhythm channels (footswitchable with optional footswitch) with 2 high-gain preamp choices in the lead channel and one clean preamp selection in the rhythm channel. The 30W RMS power section energizes a 10" Celestion speaker whose output is shaped with a 3-band EQ section with a boost switch on the lead channel for searing solos. Analog chorus and reverb adds drama to your sound while a CD/tape input lets you hone your chops with prerecorded music.
This is a USED amplifier being sold in "Very Good" condition. Photos are of the actual amplifier for sale.
- 30W RMS power section
- 10" Celestion speaker
- Channels: lead and rhythm
- Preamp modes: 2 high gain, 1 clean
- 3-band EQ
- Boost switch on lead channel
- CD/tape input
- 15-1/4"W x 18-1/4"H x 9-3/4"D
- 27 lbs.
Line 6 StageSource L2T Acoustic Guitar Amp / Loudspeaker USED
$ 649.99
Smart Speaker Modes
StageSource L2t powered loudspeakers use massive DSP and huge power to deliver studio-quality live sound at every gig. Using six powerful DSP-based Smart Speaker modes, you can optimize the speaker's output for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. An onboard accelerometer and pole-mount sensors automatically detect the speaker's orientation and set the Smart Speaker mode accordingly.
Integrated Multi-Channel Mixer with Effects
The L2t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L2t delivers all of the tools you need for great live sound.
Fast Networking via L6 LINK
In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.
Designed to Be Different
The 800-watt, two-way, bi-amped speaker system and tour-grade plywood enclosure combine to deliver great power and reliability. The innovative multi-function design makes StageSource L2t perfect for a wide variety of applications-stacked on the floor or stage, pole-mounted, positioned horizontally as a floor monitor, used as instrument backline with Virtual Tilt-back, or flown with the integrated M10 suspension points.
Orientation and Pole-mount Sensors
StageSource L2t uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance.
Integrated Feedback Suppression
Since feedback can ruin a performance, StageSource L2t uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound.
L2t feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L2t feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively the analyzer will seek out potential feedback frequencies.
Multi-function Design and Scalability
Multi-function design combined with powerful Smart Speaker modes and digital networking provides true scalability whether you're using a single L2t as a standalone PA or multiple L2t and L2m speakers as main PA, monitors and backline. Add StageSource L3t/L3m loudspeakers and L3s subwoofers to customize a configuration that meets your live sound or installation needs.
Road-ready Construction
StageSource L2t is ready for whatever the road can throw at it. The robust enclosure is constructed of heavy-duty plywood and a tour-grade steel grille with protective screen backing that protects the drivers from impact damage.
- Smart Speaker Modes for great live sound in any live sound situation
- Multi-channel mixer with 3-band EQ, Smart Effects and acoustic guitar modeling
- Multi-function design for true scalability
- L6 LINK digital networking for multi-speaker setups
- 800-watt, 2-way, bi-amped speaker system
- Multi-band feedback suppression
- On-board accelerometer and pole-mount sensors
- Virtual Tilt-back projects speaker's output upwards in backline mode
- Tour-grade plywood enclosure with M10 suspension points
- Retractable handle for easy portability
- System Type: 0", 2-way, bi-amplified loudspeaker system
- Frequency Range (-10dB): 44Hz to 19kHz, (Reference/P.A. Speaker Mode, free-field)
- Frequency Response (±3dB): 51Hz to 18kHz, (Reference/P.A. Speaker Mode, free-field)
- Maximum SPL Output: 128dB peak @ 1 meter (unweighted, measured indoors with music program material)
- Coverage Pattern (-6dB): 100 horizontal x 50 vertical
- Directivity Factor (Q): 9.2 (averaged 1kHz to 16kHz)
- Directivity Index (DI): 9.6dB (averaged 1kHz to 16kHz)
- Crossover Frequencies: LF to HF Crossover - variable, 2.2kHz to 7.0kHz (Speaker Mode dependent)
- Low-Frequency Transducer: 10" extended range woofer, 2" diameter voice coil, 4Î impedance
- High-Frequency Transducer: 1" exit compression driver, 1.4" diameter voice coil and diaphragm, 8Î impedance
- Electrical - Rear Panel
- Input Types: Line-level XLR-1/4", balanced Stereo RCA, unbalanced L6 LINK XLR
- Input Impedance: 100 kÎ balanced 20 kÎ balanced N/A
- Max Input Levels: +20dBu +16dBV N/A
- Onset of Limiting: +6dBu input (Reference/P.A. Speaker Mode, Master Level control at center-detent)
- -6dBu input (Reference/P.A. Speaker Mode, Master Level control at maximum)
- Output Types: Balanced Loop Thru XLR Balanced Mix Out XLR L6 LINK XLR
- Output Impedances: Source-dependent 680Î balanced N/A
- Controls: Feedback Suppression On/Off/Mode, Master Level, Speaker Mode
- Indicators: Signal Present/Clip, Feedback Suppression On/Off/Mode, Limit, 6x Speaker Mode, L6 LINK Status
- Input Type: 2x mic/instrument XLR-1/4", balanced
- Input Impedance (each input): 2.63 kÎ balanced (Pad = 0dB), 23.7 kÎ balanced (Pad = 20dB)
- Gain Range (each input): -infinity to +57dB (Pad = 0dB); -infinity to +37dB (Pad = 20dB)
- Max Input Level: +25dBu (Gain at minimum ˜on' position, 20dB pad on)
- Controls:
- 2x Gain, 20dB Pad, LF Level, MF Freq & Level, HF Level, Mod Level, Reverb Level, Feedback Suppression On/Off/Mode, 1x Dual Mono/Stereo Link Mode, Acoustic Modeling Amount, On/Off
- Indicators: 2x Signal Present/Clip, 2x Feedback Suppression On/Off/Mode, 1x Acoustic Modeling On/Off
- Speaker Modes: Reference/P.A., Playback, Floor Monitor, Keyboards, Acoustic Guitar, Electric Guitar
- On-board Effects: Reverb, Modulation, Feedback Suppression, Acoustic Modeling
- Transducer Protection: Excursion limiting, thermal limiting
- Digital Networking: L6 LINK intelligent speaker networking system
- Sensors: Speaker orientation, pole sensor, power amp temperature, power supply, temperature
- Power Amplification and Supply
- Output Channel: HF LF
- Power Amplifier Type: Class AB Class D
- Peak Output Power1: 175 watts 655 watts
- Power Supply Voltage Range: 100 - 240 VAC, ± 10%, 50/60Hz , automatic voltage selection
- Power Consumption: 250 watts (1/8th power)
- Cooling: Digitally controlled, variable-speed 50 mm fan
- Protection: Output overcurrent, overtemperature, DC fault
- 1 1kHz sine wave input, 1% THD+N unweighted into the nominal load impedance, single channel driven, before the onset of limiting.
- Mechanical
- Enclosure: 15 mm enclosure, 18 mm baffle, multi-ply hardwood, textured black paint, bass, reflex design
- Floor Monitor Upward Angle: 60 using kickstands, 30 using handle
- Suspension Points: M10 x 1.5 threaded inserts, qty: 4
- Pullback Point: M10 x 1.5 threaded insert, qty: 1
- Grille: 18-gauge perforated steel, black powder coat finish
- Pole Cup: 35 mm pole cup with sensor
- Dimensions (HxWxD): 23.75" x 12.25" x 12.25"
- Weight: 39.1lb
Bolt BTH-100 Guitar Amplifier Head USED
$ 1,999.99
BOLT'S 100-WATT GUITAR AMP SERIES,
designed and built in the USA, features boutique amp quality, tone and design at mid-range prices. Bolt also raises the bar for tube amp design by incorporating a computer chip that continually monitors the power and preamp tubes to ensure they deliver cranked amp tone at any volume and EQ setting. Combine this with three channels, each featuring level and gain, selectable active/ passive EQ, and three selectable voicings, and you have guitar amps that allow guitarists to find the exact tone and sound they want at any volume, no matter what style of music they play.
Features
- Selectable 100/50-watt tube head
- Two 12AX7 preamp & four 6L6 power amp tubes (user can substitute EL 34s)
- Emulated Line out with 2 different mic positions
- Front panel analog meter displays tube saturation of both preamp and power amp
Lead, Crunch, and Clean Channels
- Gain & Level Controls
- 3 selectable Reverbs
- Selectable Active & Passive EQ with Bass, Mid (swept in Lead Channel), Treble
- 3-position Voicing switch
Master Section Features
- Level
- Presence
- SoloBoost with amount, On/Off & Gain/Level Select
- Power amp Mute switch
- 2 effects loops each with Level, Series/Parallel select, & Channel Auto Assign
- Power amp Mute switch
Rear Panel Features
- 50/100 Watt Switch
- Chassis mounted Bias Switch (6L6 or EL34)
- Output Impedance Selector
- Slave Out Level
- Mic position for emulated line out
- Ground lift for emulated line out
- Series/Parallel Switch for each effects loop
- +4dBu/-10dBV Switch for each effects loop
- Effects Level for each effects loop
- Effects Loop Auto Assign (one for each channel)
- Reverb Type Switch (one for each channel)
- Reverb Types: Plate, Spring, Hall
Protection Racket PR5028W 28x12x12 Bag with Wheels
- Fully padded. Handles at both end, and one central handle. Clear inline skate wheels. Incredibly durable construction. Protect your hardware investment!
This is a USED Bolt BTH-100 guitar amplifier head being sold in "Like New" condition. This head has been very well cared for, and it shows! Included with this head is a Protection Racket Wheeled, padded bag which is also in "Excellent" condition. Footswitch, cables all included.
Mesa Boogie 2016 Express+ 5:25 112 Combo Guitar Amplifier USED
$ 1,499.99
With uniquely inspiring Tone and a layout that’s intuitive and easy to navigate, it’s no wonder the Express™ Series has become one of our most popular amplifier lines. All-Tube and hand-built in our only shop in Petaluma, CA, the Express Plus 5:25™ offers genre-defining sounds, near-limitless versatility, and unbeatable value that others can only imitate. How do we do it? We’ve been doing this since 1969 with many of the same people…it’s our Experience – and there are no shortcuts to this level. The Express Plus 5:25 features many exciting features that take it even closer to the flagship status of our award-winning MARK FIVE®.
MULTI-WATT™ POWER, ALL TUBE REVERB, AND OUR FAMOUS 5-BAND GRAPHIC EQ
Express 525 Plus EQ
Express Plus 5:25 features a dramatic enhancement in the EQ department with the inclusion of our time-honored 5 Band Graphic Equalizer!
Both Express Plus™ models use the same super versatile, tone-packed preamp featuring two fully independent Channels, each of which contain two style enhanced modes to choose from when creating your footswitching preferences.
Channel 1 hosts the blooming low-gain sweetness of CLEAN or the snarling mid-gain percussiveness of CRUNCH and covers the rhythm territories. Channel 2 offers a different face to mid-gain with the howling honesty of BLUES or a high-gain adventure through the searing layers of molten harmonics in BURN. Together these two inspiring modes invite years of solo exploration. Both Express Plus models, the bouncy 25 watt 5:25 with its 2xEL84 9-pin power tubes and the bolder 50 watt 5:50 running 2x6L6 octal-base pentodes, now feature our patented Multi-Watt™ Channel Assignable power switching.
This valuable feature allows you to run the output tubes in your choice of three different wattage ratings per Channel - very cool right? But what's amazing is this - each power mode has it's own tone-spawning operating class and wiring configuration!
Choose the full power mode of 25 watts in the Express 5:25 for Class AB running in a Push-Pull configuration for punch, authority and headroom. Or, kick down to 15 watts for Class A Pentode and a more silky, vintage voice with enhanced clip potential. And for the ultimate in low wattage power, knock it down to the 5 watt mode... now you're running one tube in Class A Triode wired in a Single-Ended configuration.
This is USED amplifier being sold in "Like New" condition.
Fender Limited Edition '65 Deluxe Reverb Guitar Amplifier Used
$ 1,599.99 $ 2,200.00
Exceptional looks, toneful woods and classic tones; what’s not to love? This 22-watt ’65 Deluxe Reverb amp with it’s beautifully grained ash cabinet in 3-Tone unburst and Oxblood grille cloth is perfect for rock, country or blues players who want a moderately powered amp they can crank up at the gig or in the studio. ombine that with the smooth clarity of a Celestion Gold alnico speaker and you’ve got a sound to be reckoned with!
Unique features to this amp include: 3-one Sunburst painted cabinet, Oxblood grille cloth and a 12” 8-ohm Celestion Gold speaker for sparkling, articulate cleans and growling alnico crunch. Also ncludes a “Limited Edition” FSR badge.
Other Features include: Dual 6L6 output tubes, one 5AR4 rectifier tube, four 12AX7 preamp tubes, two 12AT7 tubes, dual channels (normal and vibrato), tube-driven Fender reverb, tube vibrato, two-button footswitch for reverb and vibrato on-off.
Limited to 79 units for the North America.
- Amplifier Type: Tube
- Speaker: 12”, 8-ohm Celestion Gold alnico speaker
- Impedance: 8 Ohms
- Output Power: 22 watts
- Preamp Tubes: 4 x 12AX7
- Power Tubes: 2 x 6V6
- Rectifier: 5AR4 rectifier tube
- Inputs: Normal: 1 (High input) and 2 (Low input), Vibrato: 1 (High input) and 2 (Low input)
- Controls: Volume, Treble, Bass, Reverb, Speed, Intensity
- Covering/Grille Cloth: 3-Tone Ash Sunburst cabinet and Oxblood grille cloth
- Height: 17.5" (44.5 cm)
- Width: 24.5" (62.2 cm)
- Depth: 9.5" (24.13 cm)
- Weight: 42 lbs. (19.05 kg)
- Cover: Amplifier Fitted Cover Included
- Unique FSR Features: 3-Tone Ash Sunburst cabinet and Oxblood grille cloth, a 12” Celestion Gold alnico speaker and a “Limited Edition” badge.
- There is a small crack on the rear cover plate that is not shown
Roland AC-100 Acoustic Guitar Amplifier USED
$ 299.99
This incredible amp is setting the standard for acoustic guitar amplification with its unique tri-amped, three-speaker system. Exceptional sound quality and the acclaimed Roland chorus effects make the AC-100 the choice for acoustic performers.
- 100 watt, tri-amped configuration: 50W x 25W x 25W
- Two-way, three-speaker system: one 12" and two 5" speakers
- Two independent channels, each with three-band EQ and effects control
- Mic level XLR input for vocal accompaniment or guitar without pickup
- Built-in notch-filter for eliminating feedback and howling
Output:100W (25W + 25W + 50W)Speakers5" (12 cm) x 2, 12" (30 cm) x 1ConnectorsInput (Hi/Piezo, Low/Active [Guitar Channel], XLR, Headphones [Mic/Aux channel] )
Line Out: (XLR [A, B], Phones [A, B] )
Effects: (Send, Return)
Footswitches: (Reverb, Chorus)Power Consumption102W (AC 117/230/240 V)
Width: 25-7/16 inches
Depth:11-3/4 inches
Height: 21 inches
Weight: 55 lbs. 2 oz.
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2019 Huber Breese Music. Powered by Shopify
