Guitar Amplifiers
Fender 1996 Blues DeVille Guitar Combo Amplifier USED - Tweed
Sold Out
SPECS
- 3 12AX7 preamp tubes and 2 6L6 output tubes.
- Normal and Drive channels, voiced for classic blues, country and rock styles
- Bright switch for Normal channel
- Fender spring Reverb
- Effects Loop
- Cloth Tweed covering, Chicken Head pointer knobs and chrome control panel
- Two-button footswitch (Channel/Drive-More Drive) is included
Magnatone 1957-59 Custom 260 HiFi Amplifier USED
$ 2,500.00
-Power Output: approximately 35 watts
-Tubes: 5U4, 6L6 (2), 6CG7 (2), 12AX7 (3)
-Controls: Loudness, Treble, Bass | Loudness, Treble, Bass | Intensity, Speed
-Dimensions: 26.5'' x 21'' x 9''
**Amp appears to be original with exception of replacement power cord.
Fender 1965 Reverb Amp USED - Black
$ 1,195.00
**Amp is used in good condition**
Mesa Boogie 2015 Mark V 35 Combo Guitar Amplifier USED - Black
$ 1,799.99
This amplifier is in excellent condition. No wear on tolex, grill cloth, or control panel. Comes with footswitch and cover.
Quick Overview |
|
|---|---|
| Build Location | Hand-Wired In Petaluma, CA with the World's Finest Materials |
| Wattage | Multi-Watt™ 10, 25 or 35 (Channel Assignable) |
| Power Tube Type | 4x Mesa EL84 |
| Channels & Modes | 2 Channels / 6 Modes |
| Mode Voicings / Styles | Ch. 1 = Clean, Fat or Crunch Ch. 2 = Mark IIC+™, Mark IV™ or Extreme |
| Graphic EQ / Reverb / FX / Solo | Graphic EQ, Reverb, FX Loop & Ch. Independent Solo |
| Footswitchable Functions | Ch. 1/2, EQ, Solo Ch 1 & Solo Ch 2 |
| Speaker(s) & Impedance | 1 - 8 Ohm Celestion Custom 90 / Total Load = 8 Ohms |
| Weight | 44 Lbs. |
| Dimensions | 18 1/8" H x 18 3/4" W x 11 1/2" D |
| Available Formats | Combo |
Amplifier Features |
|
|---|---|
| Amp Type | Tube |
| Chassis Material | Aluminum |
| Rectifier Type | Silicon Diodes |
| Rectifier Tubes | n/a |
| Variac Power Switch | n/a |
| Preamp Tubes | 6x Mesa 12AX7 |
| Power Amp Tubes | 4x Mesa EL-84 |
| Bias Switch for Alternate Power Tubes Types | n/a |
| Maintenance Free Fixed Bias | Yes |
| Wattage(s) Quick Reference | 10, 25 or 35 Watts - Channel Assignable - See Power Amp Details for more information |
| Built-In Power Amp Attenuation | n/a |
| Power Amp Details (Class & Wattage) | Mesa's Patented Multi-Watt™ (Patent 7,602,927) Power Amp, featuring Dyna-Watt™ technology, providing three power levels and two wiring configurations (Pentode/Triode) via two 10/25/35 Watt Power Switches: Choose from 2 power tubes operating in Class A/B Triode for lush harmonics and a sweet, liquid feel at lower volumes, producing 10 Watts or; 2 or 4 tubes operating in Mesa's proprietary Dyna-Watt™ Class A/B Pentode for maximum power, punch and clarity, producing 25 or 35 Watts respectively |
| Convection or Fan Cooling | Fan Cooled |
| Number of Footswitchable Channels (or Modes) | Two Channels |
| Number of Style Modes | Six |
| Number of Style Modes Per Channel | Three |
| Types of Style Modes Per Channel | Ch. 1 = Clean, Fat or Crunch Ch. 2 = Mark IIC+™, Mark IV™ or Extreme |
| Channel Controls | Each Channel features Independent 3-Position Style Mode Switch, 10/25/35 Watt Multi-Watt™ Switch, Gain, Treble, Mid/Boost* (Ch 1), Mid (Ch 2), Bass, Presence, Reverb (back panel), Master, Footswitchable Channel Independant Solo and Graphic EQ Assignment Switch (On, Off or Footswitchable) - *The Mid/Boost Control on Channel 1 doubles as a standard Mid Control when set between 0 to 5 and turns into a Variable Gain Boost when set from 5 to 10 |
| Graphic EQ and/or Contour | Selectable 5-Band Graphic EQ (Footswitchable, Channel Assignable or Off) |
| Reverb / Effects & Bypass Options | All-Tube, Long-Tank Spring Reverb with Independent Channel Controls |
| Effects Loop & Bypass Options | Fully Buffered Series FX Loop |
| Global Output Level Control | n/a |
| Global Solo Level Control & Bypassable Options | Footswitchable, Channel Independent Solo Controls |
| True-Bypass Options | n/a |
| Tuner Output | n/a |
| External Switching Jack Options and/or Midi | n/a |
| Speaker Outputs | One 8 Ohm and Two 4 Ohm |
| Cabinet Simulation - Direct Live/Recording Output | Built-in Mesa CabClone™ Cab Simulator with Internal Amp Load & Headphone Output - Featuring Closed Back, Open Back & Vintage Cabinet Simulations, Speaker On/Off and Ground Lift Switches |
| Headphone Output | Yes (see Cabinet Simulation for more information) |
| Slave Output | n/a |
Additional Amplifier Features |
|
|---|---|
| Extra Amplifier Features | Larger Transformers than the Mark Five: 25 |
Accessories |
|
|---|---|
| Footswitch | Included - 4 Button Footswitch (Ch. 1/2, EQ, Solo Ch 1 & Solo Ch 2) |
| Slip Cover | Included - Fitted Slip Cover |
Cabinet Features |
|
|---|---|
| Cabinet Material | Marine Grade, Baltic Birch |
| Standard Finish Options (no extra cost) | Black Taurus or Black Bronco Vinyl, Black Jute Grille, Black Handle & Corners |
| Custom Finish Options | See Custom Finish Gallery |
| Speaker(s) & Impedance | 1 - 8 Ohm Celestion Custom 90 / Total Load = 8 Ohms |
| Casters | n/a |
Weight And Dimensions |
|
|---|---|
| Weight | 44 Lbs. |
| Height | 18 1/8" |
| Width | 18 3/4" |
| Depth | 11 1/2" |
Fender 2002 Hot Rod Deville 410 Amplifier USED - Black
$ 599.99
-
Model #: 0213201000
- Serial Number: B-150402
Product Specs
General
- Hot Rod
- Black and Silver
- Tube
- MX
- Archived
Electronics
- Presence, Reverb, Master Volume, Middle, Bass, Treble, Drive Select Switch, Drive Volume, Bright Switch
- Presence, Reverb, Master Volume, Middle, Bass, Treble, Drive Select Switch, Drive Volume, Bright Switch
- Two - (1/4", Input 2 operates at -6dB)
- Three - Selectable (Normal, Drive and More Drive)
- 1/4" - (Preamp Out, Power Amp In)
- 120V
- 60 Watts
Hardware
- Chicken-Head Style Pointer - Black
- Black Textured Vinyl
- 13-Ply Birch/Maple Plywood
- Silver
- Molded Rubber "Dog Bone" Style
- Red Jewel
- Two 1/4" Parallel (Internal and External)
- Chrome
Speakers
- 4 or 8 ohms
Tubes
- 2 x 6L6
- Groove Tubes® - (3 x 12AX7)
- Solid State
Accessories
- 2-Button 3-Function (Channel Select, Drive/More Drive), P/N: 0994062000 (Included)
Measurements
- 10.625" (270 mm)
- 23.5" (59.7 cm)
- 23.5" (59.7 cm)
- 2 x 6L6
**Amp is used but in good condition. Recently serviced by a professional amp tech and 2 speakers were replaced along with reverb tank. Has casters currently installed. No amp cover included.
Oahu 1940s Made by Magnatone Lap Steel Guitar Amplifier USED
$ 399.99
This amplifier is in good condition for its age. Tubes have been replaced. Power cord has been replaced. Amp comes with original tubes and power cable. Previous owner has written up a detailed wiring schematic of amplifier see pictures.
Fender 1966 Vibro-Champ AA-764 Guitar Amplifier USED - Black
$ 2,599.00
Fender Vibro-Champ AA-764 model tube amp made in Fullerton, California. Serial nubmer is A-11114. All original minus replacement power cord (with ground). Tolex is intact along with handle. The tube chart is stamped "PF", indicating assembly in June 1966. Speaker is the original Oxford 8EV-52 marked 465-709 (dated the 22nd week of 1966). Both power and output transformers are the original Schumachers and date to the 3rd week of 1966 and first week of 1966. Most of the pots date to mid/late 1966. Includes original cover.
Silvertone 1965 1481 5W 1X8" Guitar Amplifier USED
$ 575.00
This amplifier is in excellent condition. All parts are functional.
Wattage: 5W
Speaker Size: 1x8"
Amp Type: Tube
Voice of Music V-M Model 162 & 163 Tube Amplifier VINTAGE
$ 150.00
V-M Model 162 & 163
- Serial Number: 179740
- 3 tubes
- 40 watts
- 60 cycles
Webcore TP4905-1 50W Tube Amp VINTAGE
$ 299.99
Vintage Webcor Portable Tube Speaker Amplifier
Specifications
- Serial Number: 872792
- Model: TP-4905-1
- Power: 60 cyles / 50 watts
- Inputs: Instrument, hi/lo inputs
- Two tubes
VOX VX50 GTV 50W Guitar Amplifier USED - Black
$ 215.00
This amp is in Mint condition. Still sealed in box never been used.
Grab. Go. Jam.
The VX50 GTV was born from a desire to open up new possibilities for guitar amps. A design that’s almost unreasonably lightweight, an internal structure carefully calculated for the optimal sound, realistic and stage-ready sounds driven by modeling technology, and the next-generation Nutube vacuum tube featured on the VX50 GTV are some of the many leading-edge specifications that make this a rediscovery of the guitar amp. Overturning existing ideas of guitar amps, the VX50 GTV will allow you to enjoy playing guitar in any musical scene.
■ A total of 11 amp models, polished more than ever
Thanks to their many years of developing modeling amps, VOX delivers the ultimate in sound. Proprietary VET (Virtual Element Technology) enables unprecedented realism, reproducing not only the audible result but rethinking the original circuit itself, painstakingly modeling even individual components that affect the sound. In addition to the classic AC30, this one unit covers a diverse multitude of sounds that include famous tube amps, modern high-gain amps, and rare boutique amps. Newly added is a LINE type which supports not only electric guitar but also acoustic guitar, further expanding this unit’s usefulness.
■ A well-rounded selection of eight effect types
Also included is a full selection of the effect types that are indispensable in shaping your sound. You can simultaneously use both types, modulation and delay/reverb, and choose from four types each, giving you a total of eight variations. This means that you have the ability to add the final touches to shape your overall guitar sound. There’s also a tap button, so you can set parameters such as delay time in an intuitive manner.
■ Internal structure crafted for excellent acoustic response, with an ultra-lightweight sealed body made of ABS, and a bass-reflex design
You’ll be amazed the instant you lift this unit! The VX50 GTV achieves an ultra-lightweight design that seems unreasonable for a guitar amp, but lightness is not its only advantage. A sealed body made of ABS for its excellent acoustical properties minimizes unneeded vibration, eliminating loss of sound and efficiently projecting your guitar sound. The bass-reflex structure ensures good coverage of the low-frequency range. Unlike the case with a typical small amp, you will feel no lack of power.
■ Equipped with a Nutube, the VX50 GTV expands its range of action even farther
The VX50 GTV features a Nutube, the new-generation vacuum tube. Using electro-luminescent technology with the same structure as a conventional vacuum tube, the Nutube has been featured on a variety of VOX and other products. The distortion and sense of compression that you expect from a vacuum tube, and even the response and playing feel, perfectly capture the feeling of playing a vacuum tube. In addition to the light-weight design that was unobtainable by a conventional vacuum tube amp, the Nutube brings additional unique advantages such as being maintenance-free and delivering amazing cost-effectiveness.
■ The USB audio interface-equipped VX50 GTV
The VX50 GTV features USB audio interface functionality that lets you connect it to your computer via USB, and record the Nutube sound directly. In addition to letting you enjoy performing, this unit brings high potential as an amp that integrates well with your desktop music setup.
SPECIFICATIONS
Line6 Spider 212 100 Watt Combo Guitar Amplifier USED
$ 399.99
In very good condition and good working order!- 6 Amp Models
- 7 Digital Effects with Smart Control and Tap Tempo
- 10 Factory Presets
- 18 Factory Presets w/Floorboard
- 4 User Programmable Channels
- 12 User Programmable Channels w/Floorboard
- 1/4 inch TRS Headphone & Direct Out
- 100 Watts (2 x 50) Stereo Power
- Mono speaker/ Stereo headphone & DI
- 2 X 12 inch combo
Line 6 StageSource L2T Acoustic Guitar Amp / Loudspeaker USED
$ 649.99
Smart Speaker Modes
StageSource L2t powered loudspeakers use massive DSP and huge power to deliver studio-quality live sound at every gig. Using six powerful DSP-based Smart Speaker modes, you can optimize the speaker's output for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. An onboard accelerometer and pole-mount sensors automatically detect the speaker's orientation and set the Smart Speaker mode accordingly.
Integrated Multi-Channel Mixer with Effects
The L2t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L2t delivers all of the tools you need for great live sound.
Fast Networking via L6 LINK
In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.
Designed to Be Different
The 800-watt, two-way, bi-amped speaker system and tour-grade plywood enclosure combine to deliver great power and reliability. The innovative multi-function design makes StageSource L2t perfect for a wide variety of applications-stacked on the floor or stage, pole-mounted, positioned horizontally as a floor monitor, used as instrument backline with Virtual Tilt-back, or flown with the integrated M10 suspension points.
Orientation and Pole-mount Sensors
StageSource L2t uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance.
Integrated Feedback Suppression
Since feedback can ruin a performance, StageSource L2t uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound.
L2t feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L2t feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively the analyzer will seek out potential feedback frequencies.
Multi-function Design and Scalability
Multi-function design combined with powerful Smart Speaker modes and digital networking provides true scalability whether you're using a single L2t as a standalone PA or multiple L2t and L2m speakers as main PA, monitors and backline. Add StageSource L3t/L3m loudspeakers and L3s subwoofers to customize a configuration that meets your live sound or installation needs.
Road-ready Construction
StageSource L2t is ready for whatever the road can throw at it. The robust enclosure is constructed of heavy-duty plywood and a tour-grade steel grille with protective screen backing that protects the drivers from impact damage.
- Smart Speaker Modes for great live sound in any live sound situation
- Multi-channel mixer with 3-band EQ, Smart Effects and acoustic guitar modeling
- Multi-function design for true scalability
- L6 LINK digital networking for multi-speaker setups
- 800-watt, 2-way, bi-amped speaker system
- Multi-band feedback suppression
- On-board accelerometer and pole-mount sensors
- Virtual Tilt-back projects speaker's output upwards in backline mode
- Tour-grade plywood enclosure with M10 suspension points
- Retractable handle for easy portability
- System Type: 0", 2-way, bi-amplified loudspeaker system
- Frequency Range (-10dB): 44Hz to 19kHz, (Reference/P.A. Speaker Mode, free-field)
- Frequency Response (±3dB): 51Hz to 18kHz, (Reference/P.A. Speaker Mode, free-field)
- Maximum SPL Output: 128dB peak @ 1 meter (unweighted, measured indoors with music program material)
- Coverage Pattern (-6dB): 100 horizontal x 50 vertical
- Directivity Factor (Q): 9.2 (averaged 1kHz to 16kHz)
- Directivity Index (DI): 9.6dB (averaged 1kHz to 16kHz)
- Crossover Frequencies: LF to HF Crossover - variable, 2.2kHz to 7.0kHz (Speaker Mode dependent)
- Low-Frequency Transducer: 10" extended range woofer, 2" diameter voice coil, 4Î impedance
- High-Frequency Transducer: 1" exit compression driver, 1.4" diameter voice coil and diaphragm, 8Î impedance
- Electrical - Rear Panel
- Input Types: Line-level XLR-1/4", balanced Stereo RCA, unbalanced L6 LINK XLR
- Input Impedance: 100 kÎ balanced 20 kÎ balanced N/A
- Max Input Levels: +20dBu +16dBV N/A
- Onset of Limiting: +6dBu input (Reference/P.A. Speaker Mode, Master Level control at center-detent)
- -6dBu input (Reference/P.A. Speaker Mode, Master Level control at maximum)
- Output Types: Balanced Loop Thru XLR Balanced Mix Out XLR L6 LINK XLR
- Output Impedances: Source-dependent 680Î balanced N/A
- Controls: Feedback Suppression On/Off/Mode, Master Level, Speaker Mode
- Indicators: Signal Present/Clip, Feedback Suppression On/Off/Mode, Limit, 6x Speaker Mode, L6 LINK Status
- Input Type: 2x mic/instrument XLR-1/4", balanced
- Input Impedance (each input): 2.63 kÎ balanced (Pad = 0dB), 23.7 kÎ balanced (Pad = 20dB)
- Gain Range (each input): -infinity to +57dB (Pad = 0dB); -infinity to +37dB (Pad = 20dB)
- Max Input Level: +25dBu (Gain at minimum ˜on' position, 20dB pad on)
- Controls:
- 2x Gain, 20dB Pad, LF Level, MF Freq & Level, HF Level, Mod Level, Reverb Level, Feedback Suppression On/Off/Mode, 1x Dual Mono/Stereo Link Mode, Acoustic Modeling Amount, On/Off
- Indicators: 2x Signal Present/Clip, 2x Feedback Suppression On/Off/Mode, 1x Acoustic Modeling On/Off
- Speaker Modes: Reference/P.A., Playback, Floor Monitor, Keyboards, Acoustic Guitar, Electric Guitar
- On-board Effects: Reverb, Modulation, Feedback Suppression, Acoustic Modeling
- Transducer Protection: Excursion limiting, thermal limiting
- Digital Networking: L6 LINK intelligent speaker networking system
- Sensors: Speaker orientation, pole sensor, power amp temperature, power supply, temperature
- Power Amplification and Supply
- Output Channel: HF LF
- Power Amplifier Type: Class AB Class D
- Peak Output Power1: 175 watts 655 watts
- Power Supply Voltage Range: 100 - 240 VAC, ± 10%, 50/60Hz , automatic voltage selection
- Power Consumption: 250 watts (1/8th power)
- Cooling: Digitally controlled, variable-speed 50 mm fan
- Protection: Output overcurrent, overtemperature, DC fault
- 1 1kHz sine wave input, 1% THD+N unweighted into the nominal load impedance, single channel driven, before the onset of limiting.
- Mechanical
- Enclosure: 15 mm enclosure, 18 mm baffle, multi-ply hardwood, textured black paint, bass, reflex design
- Floor Monitor Upward Angle: 60 using kickstands, 30 using handle
- Suspension Points: M10 x 1.5 threaded inserts, qty: 4
- Pullback Point: M10 x 1.5 threaded insert, qty: 1
- Grille: 18-gauge perforated steel, black powder coat finish
- Pole Cup: 35 mm pole cup with sensor
- Dimensions (HxWxD): 23.75" x 12.25" x 12.25"
- Weight: 39.1lb
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2024 Huber Breese Music. Powered by Shopify
