Gear up and get ready to take your performance to the next level with Player II Modified. Featuring key upgrades for the modern guitarist and bassist, these versatile instruments are designed to handle anything you can throw at them.
The Player II Modified Telecaster® is a classic guitar with the modern player in mind. Everything about the neck is designed for fast and fluid playability, from the Modern “C”-profile with silky satin urethane finish on the back to the comfy 9.5”-radius slab rosewood or 1-piece maple fingerboard with smooth rolled edges and 22 medium jumbo frets. The alder body provides classic Fender punch and is available in a variety of exciting new finishes. The Player II noiseless™ pickups deliver classic Tele® twang and bite while eliminating unwanted noise and the push/pull switch on the tone control provides even more tonal flexibility by changing the pickup wiring from parallel to series for fatter tones. The 6-saddle bridge, short post locking tuners, TUSQ® nut and modern string tree all combine to keep tuning incredibly stable for even the most demanding bends or roaring rock leads.
Upgrade your arsenal today with the Player II Modified Telecaster.
Serial Number: MX24085426
Weight: 8.2 lbs
Specs
General
Player II Modified
Right-Hand
Sunshine Yellow
MX
Neck
Maple
Satin Urethane
Modern "C"
4-Bolt Standard
9.5" (241 mm)
Maple
Black Dot
Black
22
Single Action, Head Adjust
TUSQ™
1.650" (42 mm)
TUSQ™
Body
Alder
Gloss Polyester
Telecaster®
Alder
Hardware
Nickel/Chrome
Deluxe Cast/Sealed Locking (all short posts)
Modern Dual-Wing
Fender® USA 250L Nickel Plated Steel (.009-.042 Gauges), PN 0730250403
4-Bolt with "F" Logo
Vintage-Style
Electronics
Pickup Configuration: SS
Controls: Master Volume with Treble-Bleed, Master Tone
Switching: 3-Position Blade: Position 1: Neck Pickup, Position 2: Neck and Bridge Pickup, Position 3: Bridge Pickup
Auxiliary Switching: Push/Pull Tone Control Activates Series Mode
Step into the spotlight and experience iconic Fender® sound and style with the Player II Mustang® — a stage-ready guitar with contemporary updates to power your performance and inspire your playing.
The Player II Mustang radiates timeless Fender charm, but under the hood, it's primed for today's players. Everything about the neck is designed for fast and fluid playability, from the Modern “C”-profile with silky satin urethane finish on the back to the comfy 9.5”-radius slab rosewood or maple fingerboard with smooth rolled edges and 22 medium jumbo frets. A classic alder body is available in both timeless Fender finishes and never-before-seen colors unearthed from the archives. Player Series Alnico V Single-Coil Mustang® pickups offer crystalline highs, musical mids and tight lows that elevate any genre. The 3-way toggle switch lets you easily dial in everything from glassy neck pickup chime to cutting bridge pickup snarl and all points in between, while a 6-saddle hardtail bridge, bent steel saddles and ClassicGear™ tuners ensure precise tuning stability for the flexibility to explore endless sonic possibilities.
Perfect for crafting your own sound, the Player II Mustang has the looks, tone and feel that only a Fender delivers.
Serial Number: MX24052327
Weight: 6.8 lbs
Specs
Neck
HEADSTOCK: Mustang®
NECK MATERIAL: Maple
NECK FINISH: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
NECK SHAPE: Modern "C"
NECK CONSTRUCTION: 4-Bolt Standard
FINGERBOARD RADIUS: 9.5" (241 mm)
FINGERBOARD MATERIAL: Slab Rosewood
POSITION INLAYS: White Dot
SIDE DOTS: White
NUMBER OF FRETS: 22
TRUSS ROD: Single Action, Head Adjust
TRUSS ROD NUT: 3/16" Hex Adjustment
STRING NUT: Synthetic Bone
NUT WIDTH: 1.650" (42 mm)
NUT MATERIAL: Synthetic Bone
Body
BODY: Alder
BODY FINISH: Gloss Polyester
BODY SHAPE: Mustang®
BODY STYLE: Solid Body
BODY MATERIAL: Alder
Hardware
BRIDGE: 6-Saddle Strings-Through-Body Strat® Hardtail with Bent Steel Saddles
Step into the spotlight and experience iconic Fender® sound and style with the Player II Telecaster® — a stage-ready guitar with contemporary updates to power your performance and inspire your playing.
The Player II Telecaster radiates timeless Fender charm, but under the hood, it's primed for today's players. Everything about the neck is designed for fast and fluid playability, from the Modern “C”-profile with silky satin urethane finish on the back to the comfy 9.5”-radius slab rosewood or maple fingerboard with smooth rolled edges and 22 medium jumbo frets. Choose from alder, chambered ash or chambered mahogany bodies available in both classic Fender finishes and never-before-seen colors unearthed from the archives. Player Series Alnico V Single-Coil Tele® pickups offer crystalline highs, musical mids and tight lows that elevate any genre. The 3-way blade switch lets you dial in everything from smooth neck pickup chime to cutting bridge pickup twang and all points in between, while a 6-saddle bridge, block steel saddles and ClassicGear™ tuners ensure precise tuning stability for the flexibility to explore endless sonic possibilities.
Perfect for crafting your own sound, the Player II Telecaster has the looks, tone and feel that only a Fender delivers.
Serial Number: MX24037441
Weight: 8 lbs
Specs
Neck
HEADSTOCK: Telecaster®
NECK MATERIAL: Maple
NECK FINISH: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
NECK SHAPE: Modern "C"
NECK CONSTRUCTION: 4-Bolt Standard
FINGERBOARD RADIUS: 9.5" (241 mm)
FINGERBOARD MATERIAL: Maple
POSITION INLAYS: Black Dot
SIDE DOTS: Black
NUMBER OF FRETS: 22
TRUSS ROD: Single Action, Head Adjust
TRUSS ROD NUT: 3/16" Hex Adjustment
STRING NUT: Synthetic Bone
NUT WIDTH: 1.650" (42 mm)
NUT MATERIAL: Synthetic Bone
Body
BODY: Alder
BODY FINISH: Gloss Polyester
BODY SHAPE: Telecaster®
BODY STYLE: Solid Body
BODY MATERIAL: Alder
Hardware
BRIDGE: 6-Saddle String-Through-Body Tele® with Bent Steel Saddles
Step into the spotlight and experience iconic Fender® sound and style with the Player II Telecaster® — a stage-ready guitar with contemporary updates to power your performance and inspire your playing.
The Player II Telecaster radiates timeless Fender charm, but under the hood, it's primed for today's players. Everything about the neck is designed for fast and fluid playability, from the Modern “C”-profile with silky satin urethane finish on the back to the comfy 9.5”-radius slab rosewood or maple fingerboard with smooth rolled edges and 22 medium jumbo frets. Choose from alder, chambered ash or chambered mahogany bodies available in both classic Fender finishes and never-before-seen colors unearthed from the archives. Player Series Alnico V Single-Coil Tele® pickups offer crystalline highs, musical mids and tight lows that elevate any genre. The 3-way blade switch lets you dial in everything from smooth neck pickup chime to cutting bridge pickup twang and all points in between, while a 6-saddle bridge, block steel saddles and ClassicGear™ tuners ensure precise tuning stability for the flexibility to explore endless sonic possibilities.
Perfect for crafting your own sound, the Player II Telecaster has the looks, tone and feel that only a Fender delivers.
Serial Number: MX24071401
Weight: 6.6 lbs
Specs
General
Series: Player II
Orientation: Right-Hand
Color: White Blonde
Country Of Origin: MX
Neck
HEADSTOCK: Telecaster®
NECK MATERIAL: Maple
NECK FINISH: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
NECK SHAPE: Modern "C"
NECK CONSTRUCTION: 4-Bolt Standard
FINGERBOARD RADIUS: 9.5" (241 mm)
FINGERBOARD MATERIAL: Slab Rosewood
POSITION INLAYS: White Dot
SIDE DOTS: White
NUMBER OF FRETS: 22
TRUSS ROD: Single Action, Head Adjust
TRUSS ROD NUT: 3/16" Hex Adjustment
STRING NUT: Synthetic Bone
NUT WIDTH: 1.650" (42 mm)
NUT MATERIAL: Synthetic Bone
Body
BODY: Chambered Ash
BODY FINISH: Gloss Polyester
BODY SHAPE: Telecaster®
BODY STYLE: Solid Body
BODY MATERIAL: Chambered Ash
Hardware
BRIDGE: 6-Saddle String-Through-Body Tele® with Block Steel Saddles
When you’re ready to hit the stage and begin performing you need an instrument that’s sleek, powerful-sounding and ready for the spotlight—an instrument like the Player Jaguar Bass. The offset body and smooth playing feel give it modern appeal; the flexible pickup combination gives it a voice that’s all its own. Designed for creative bassists, the Player Jaguar Bass is ready to take the stage with you at a moment’s notice, bringing authentic Fender sound and style.
Serial Number: MX21119537
Weight: 10.0lbs
Model #: 0149302513
Product Specs
General
Color: Tidepool
Country Of Origin: MX
Orientation: Right-Hand
Series: Player
Neck
Fingerboard Material: Maple
Fingerboard Radius: 9.5" (241 mm)
Neck Finish: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
Neck Material: Maple
Neck Shape: Modern "C"
Number of Frets: 20
Nut Material: Synthetic Bone
Nut Width: 1.5" (38.1 mm)
Position Inlays: Black Dot
String Nut: Synthetic Bone
Truss Rod Nut: 3/16" Hex Adjustment
Truss Rods: Standard
Body
Body: Alder
Body Finish: Gloss Polyester
Body Material: Alder
Body Shape: Jaguar® Bass
Hardware
Bridge: 4-Saddle Standard
Control Knobs: Vintage Style Black Plastic Jazz Bass®
In response to high-quality, low-priced import guitars, Fender created the Lead Series in 1979, featuring a new solid-body design, hard-tail bridges and cool new wiring options. Appealing to a wide variety of players, the sleek new Lead models kicked off a fresh creative era in Fender’s history.
The Player Lead II is an homage to those late 70's models, featuring dual-slanted Player series single coil pickups, a modern "C" neck shape with medium jumbo frets, dual-toggle switches (one for pickup selection, one for phase-reverse), and of course that unique Lead double-cutaway shape. Available in Neon Green, as well as vintage-correct Crimson Red Transparent and Black.
The Player Lead Series offers style, power and versatility in a comfortable, easy-to-play package.
Serial Number: MX21019609
Weight: 7.2lbs
Product Specs
Body: Alder
Body Finish: Gloss Polyester
Body Shape: Lead
Bridge: 6-Saddle String-Through-Body Hardtail With Block Saddles
Bridge Pickup: Player Series Alnico 5 Strat® Single-Coil
Color: Crimson Red Trans
Configuration: SS
Control Knobs: Knurled Flat-Top
Controls: Master Volume, Master Tone
Country Of Origin: MX
Fingerboard: Pau Ferro
Fingerboard Radius: 9.5" (241 mm)
Fret Size: Medium Jumbo
Hardware Finish: Nickel/Chrome
Headstock: Stratocaster®
Model #: 0144213538
Model Name: Player Lead II, Pau Ferro Fingerboard, Crimson Red Transparent
Neck Construction: 4-Bolt Standard
Neck Finish: Gloss Polyester
Neck Material: Maple
Neck Pickup: Player Series Alnico 5 Strat® Single-Coil
Neck Shape: Modern "C"
Number of Frets: 22
Nut Material: Synthetic Bone
Nut Width: 1.650" (42 mm)
Orientation: Right-Hand
Pickguard: 3-Ply Black
Pickup Configuration: SS
Pickup Switching: 3-Position Toggle: Position 1. Bridge Pickup, Position 2. Bridge And Neck Pickups, Position 3. Neck Pickup
In response to high-quality, low-priced import guitars, Fender created the Lead Series in 1979, featuring a new solid-body design, hard-tail bridges and cool new wiring options. Appealing to a wide variety of players, the sleek new Lead models kicked off a fresh creative era in Fender’s history.
The Player Lead II is an homage to those late 70's models, featuring dual-slanted Player series single coil pickups, a modern "C" neck shape with medium jumbo frets, dual-toggle switches (one for pickup selection, one for phase-reverse), and of course that unique Lead double-cutaway shape. Available in Neon Green, as well as vintage-correct Crimson Red Transparent and Black.
The Player Lead Series offers style, power and versatility in a comfortable, easy-to-play package.
Serial Number: MX22052789
Weight: 7.0lbs
Model #: 0144212525
Product Specs
General
SERIES: Player
ORIENTATION: Right-Hand
COLOR: Neon Green
COUNTRY OF ORIGIN: MX
Neck
HEADSTOCK: Stratocaster®
NECK MATERIAL: Maple
NECK FINISH: Gloss Polyester
NECK SHAPE: Modern "C"
NECK CONSTRUCTION: 4-Bolt Standard
FINGERBOARD RADIUS: 9.5" (241 mm)
FINGERBOARD MATERIAL: Maple
POSITION INLAYS: Black Dot
NUMBER OF FRETS: 22
STRING NUT: Synthetic Bone
NUT WIDTH: 1.650" (42 mm)
NUT MATERIAL: Synthetic Bone
Body
BODY: Alder
BODY FINISH: Gloss Polyester
BODY SHAPE: Lead
BODY MATERIAL: Alder
Hardware
BRIDGE: 6-Saddle String-Through-Body Hardtail With Block Saddles
In response to high-quality, low-priced import guitars, Fender created the Lead Series in 1979, featuring a new solid-body design, hard-tail bridges and cool new wiring options. Appealing to a wide variety of players, the sleek new Lead models kicked off a fresh creative era in Fender’s history.
The Player Lead III, a tribute to the original 1982-only model, features a set of hot alnico Player humbucking pickups, dual-toggle switches for pickup selection and coil-splits, and a modern "C" neck shape with medium jumbo frets. Available in Purple Metallic, as well as classic Olympic white and Sienna Sunburst versions.
The Player Lead Series offers style, power and versatility in a comfortable, easy-to-play package.
Serial Number: MX21147697
Weight: 7.0lbs
Model #: 0144312547
Product Specs
General
Color: Sienna Sunburst
Country Of Origin: MX
Orientation: Right-Hand
Series: Player
Neck
Fingerboard Material: Maple
Fingerboard Radius: 9.5" (241 mm)
Headstock: Stratocaster®
Neck Construction: 4-Bolt Standard
Neck Finish: Gloss Polyester
Neck Material: Maple
Neck Shape: Modern "C"
Number of Frets: 22
Nut Material: Synthetic Bone
Nut Width: 1.650" (42 mm)
Position Inlays: Black Dot
String Nut: Synthetic Bone
Body
Body: Alder
Body Finish: Gloss Polyester
Body Material: Alder
Body Shape: Lead
Hardware
Bridge: 6-Saddle String-Through-Body Hardtail With Block Saddles
Fusing innovative Fender design with player-centric features and exciting new finishes, the Player Plus Meteora Bass delivers superb playability and unmistakable style.
Powered by a pair of Fireball™ Bass Humbucking pickups, the Player Plus Meteora Bass delivers the punch and growl that defines Fender bass tone. A 3-band active EQ provides precise tone shaping with switchable active/passive operation for ultimate flexibility. The Player Plus Meteora Bass neck is sleek, fast, and smooth thanks to its silky satin finish, comfortable rolled edges on a 12” inch radius fingerboard, and modern “C” back-shape. A rock solid HiMass™ bridge provides sustain, resonance, and perfect intonation.
With classic Fender style, advanced features and stunning new finishes, the Player Plus Meteora Bass is the perfect tool to spark your creativity and stand out from the crowd.
Serial Number: MX22041460
Weight: 9.2lbs
Model #: 0147392391
Product Specs
General
Color: Silverburst
Country Of Origin: MX
Orientation: Right-Hand
Series: Player Plus
Neck
Fingerboard Material: Maple
Fingerboard Radius: 12" (305 mm)
Neck Finish: Satin Urethane with Gloss Urethane Headstock Face
Fusing innovative Fender design with player-centric features and exciting new finishes, the Player Plus Meteora® delivers superb playability and unmistakable style.
A set of powerful Fireball™ humbucking pickups blend the perfect amount of gain with great string-to-string note clarity. An S-1™ switch activates the coil-split, delivering crystal-clear single-coil tones. The silky satin Modern “C” neck fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12” radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends. Smooth and responsive, the 2-point tremolo provides classic vibrato effects, while the locking tuners provide rock-solid tuning and make string changes quick and easy.
With classic Fender style, advanced features and stunning new finishes, the Player Plus Meteora® is the perfect tool to spark your creativity and let you stand out from the crowd.
Serial Number: MX22051085
Weight: 8.4lbs
Model #: 0147352300
Product Specs
General
Color: 3-Color Sunburst
Country Of Origin: MX
Orientation: Right-Hand
Series: Player Plus
Neck
Fingerboard Material: Maple
Fingerboard Radius: 12" (305 mm)
Neck Construction: 4-Bolt Standard
Neck Finish: Satin Urethane with Gloss Urethane Headstock Face
Neck Material: Maple
Neck Shape: Modern "C"
Number of Frets: 22
Nut Material: Synthetic Bone
Nut Width: 1.685" (42.8 mm)
Position Inlays: Black Dot
Side Dots: Black
String Nut: Synthetic Bone
Truss Rod: Single Action, Head Adjust
Body
Body: Alder
Body Finish: Gloss Polyester
Body Material: Alder
Body Shape: Meteora
Hardware
Bridge: 2-Point Synchronized Tremolo with Brushed Steel Block Saddles
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Stratocaster® guitar neck features a silky satin Modern “C” shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12” radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; findAuthorized Service Centerlocations near you in the “Support” section of fender.com
Model #:
0997313921
Product Specs
General
SERIES: Necks
ORIENTATION: Right-Hand
COLOR: Natural
INSTRUMENT TYPE:Stratocaster®
COUNTRY OF ORIGIN: MX
Neck
NECK MATERIAL: Maple with Walnut Stripe
NECK FINISH: Satin Urethane with Gloss Urethane Headstock Face
Fusing classic Fender® design with player-centric features and exciting new finishes, the Player Plus Telecaster® delivers superb playability and unmistakable style. Powered by a set of Player Plus Noiseless™ pickups, the Player Plus Tele® delivers warm, sweet Tele® twang – without hum. A push-pull switch on the tone control engages both pickups in series operation, delivering increased output and body. The silky satin Modern “C” Player Plus Tele® neck fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12” radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends. A modern 6-saddle Tele bridge with block steel saddles adds a touch of brightness while providing precise intonation and the locking tuners provide rock-solid tuning and make string changes quick and easy. With classic Fender style, advanced features and stunning new finishes, the Player Plus Telecaster is the perfect tool to spark your creativity and stand out from the crowd.
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Telecaster® guitar neck features a silky satin Modern “C” shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12” radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Model #: 0997332921
Product Specs
General
SERIES: Necks
ORIENTATION: Right-Hand
COLOR: Natural
INSTRUMENT TYPE: Telecaster®
COUNTRY OF ORIGIN: MX
Neck
NECK MATERIAL: Maple with Walnut Stripe
NECK FINISH: Satin Urethane with Gloss Urethane Headstock Face
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Telecaster® guitar neck features a silky satin Modern “C” shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12” radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Model #: 0997333921
Product Specs
General
SERIES: Necks
ORIENTATION: Right-Hand
COLOR: Natural
INSTRUMENT TYPE: Telecaster®
COUNTRY OF ORIGIN: MX
Neck
NECK MATERIAL: Maple with Walnut Stripe
NECK FINISH: Satin Urethane with Gloss Urethane Headstock Face
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Model #: 0994562921
Product Specs
General
SERIES: Necks
ORIENTATION: Right-Hand
COLOR: Natural
INSTRUMENT TYPE: Stratocaster®
COUNTRY OF ORIGIN: MX
Neck
NECK MATERIAL: Maple
NECKFINISH: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Model #: 0994563921
Product Specs
General
SERIES: Necks
ORIENTATION: Right-Hand
COLOR: Natural
INSTRUMENT TYPE: Stratocaster®
COUNTRY OF ORIGIN: MX
Neck
NECK MATERIAL: Maple
NECK FINISH: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Telecaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Model #: 0995263921
Product Specs
General
SERIES: Necks
ORIENTATION: Right-Hand
COLOR: Natural
INSTRUMENT TYPE: Stratocaster®
COUNTRY OF ORIGIN: MX
Neck
NECK MATERIAL: Maple
NECK FINISH: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
The inspiring sound of a Stratocaster is one of the foundations of Fender. Featuring this classic sound—bell-like high end, punchy mids and robust low end, combined with crystal-clear articulation—the Player Stratocaster is packed with authentic Fender feel and style. It’s ready to serve your musical vision, it’s versatile enough to handle any style of music and it’s the perfect platform for creating your own sound.
Serial Number: MX21287527
Weight: 8.0lbs
Model #: 0144503515
Product Specs
General
Color: Polar White
Country Of Origin: MX
Orientation: Right-Hand
Series: Player
Neck
Fingerboard Material: Pau Ferro
Fingerboard Radius: 9.5" (241 mm)
Neck Finish: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
Neck Material: Maple
Neck Shape: Modern "C"
Number of Frets: 22
Nut Material: Synthetic Bone
Nut Width: 1.650" (42 mm)
Position Inlays: White Dot
String Nut: Synthetic Bone
Truss Rod: Standard
Truss Rod Nut: 3/16" Hex Adjustment
Hardware
Bridge: 2-Point Synchronized Tremolo with Bent Steel Saddles
Bridge Pickup: Player Series Alnico 5 Strat® Single-Coil
Controls: Master Volume, Tone 1. (Neck/Middle Pickups), Tone 2. (Bridge Pickup)
Middle Pickup: Player Series Alnico 5 Strat® Single-Coil
Neck Pickup: Player Series Alnico 5 Strat® Single-Coil
Pickup Configuration: SSS
Switching: 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
Bold, innovative and rugged, the Player Telecaster is pure Fender, through and through. The feel, the style and, most importantly, the sound—they’re all there, waiting for you to make them whisper or wail for your music. Versatile enough to handle almost anything you can create and durable enough to survive any gig, this workhorse is a trusty sidekick for your musical vision.
Serial Number: MX24024834
Weight: 7.8 lbs
Model #: 0145212506
Product Specs
General
Color: Black
Country Of Origin: MX
Orientation: Right-Hand
Series: Player
Neck
Fingerboard Material: Maple
Fingerboard Radius: 9.5" (241 mm)
Neck Finish: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
Neck Material: Maple
Neck Shape: Modern "C"
Number of Frets: 22
Nut Material: Synthetic Bone
Nut Width: 1.650" (42 mm)
Position Inlays: Black Dot
String Nut: Synthetic Bone
Truss Rod Nut: 3/16" Hex Adjustment
Truss Rods: Standard
Body
Body: Alder
Body Finish: Gloss Polyester
Body Material: Alder
Body Shape: Telecaster
Miscellaneous
Style: 2 Single-Coil
Accessories
Included Accessories: None
Truss Rod Wrench: 3/16" Hex (Allen)
Measurements
Fret Size: Medium Jumbo
Scale Length: 25.5" (648 mm)
Electronics
Bridge Pickup: Player Series Alnico 5 Tele® Single-Coil
Controls: Master Volume, Master Tone
Neck Pickup: Player Series Alnico 5 Tele Single-Coil
Pickup Configuration: SS
Switching: 3-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Neck Pickups, Position 3. Neck Pickup
Hardware
Bridge: 6-Saddle String-Through-Body Tele® with Block Steel Saddles
Bold, innovative and rugged, the Player Telecaster is pure Fender, through and through. The feel, the style and, most importantly, the sound—they’re all there, waiting for you to make them whisper or wail for your music. Versatile enough to handle almost anything you can create and durable enough to survive any gig, this workhorse is a trusty sidekick for your musical vision.
Serial Number: MX23159468
Weight: 7.8lbs
Model #: 0145212550
Product Specs
General
Color: Butterscotch Blonde
Country Of Origin: MX
Orientation: Right-Hand
Series: Player
Neck
Fingerboard Material: Maple
Fingerboard Radius: 9.5" (241 mm)
Neck Finish: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
Neck Material: Maple
Neck Shape: Modern "C"
Number of Frets: 22
Nut Material: Synthetic Bone
Nut Width: 1.650" (42 mm)
Position Inlays: Black Dot
String Nut: Synthetic Bone
Truss Rod: Standard
Truss Rod Nut: 3/16" Hex Adjustment
Body
Body: Alder
Body Finish: Gloss Polyester
Body Material: Alder
Body Shape: Telecaster®
Hardware
Bridge: 6-Saddle String-Through-Body Tele® with Block Steel Saddles
Well-known as a familiar mainstay in folk, bluegrass, and country music, the mandolin is the perfect addition for alternative bands, singer-songwriters and pop/rock players looking to diversify their sound. The Fender Paramount PM-180E features a spruce top, mahogany “A”- style body, and parallel tone bar bracing for a bright, clear tone. For those looking to plug in, it comes equipped with a Fishman® pickup ideal for sitting perfectly in the mix with a full band or small acoustic ensemble.
Other features include a comfortable neck profile, walnut fingerboard with snowflake inlays, open-gear tuners with pearloid buttons, genuine bone nut, and gig bag.
Serial Number: CAXM240506
Model #: 0970382337
Product Specs
General
SERIES: Paramount
ORIENTATION: Right-Hand
COLOR: Aged Cognac Burst
INSTRUMENT TYPE: Mandolin
COUNTRY OF ORIGIN: CN
Neck
NECK MATERIAL: Maple
NECK FINISH: Satin
NECK SHAPE: "V" Shape
FINGERBOARD RADIUS: 18" (457mm)
FINGERBOARD MATERIAL: Walnut
POSITION INLAYS: Snowflake
NUMBER OF FRETS: 21
TRUSS ROD: Standard
TRUSS ROD NUT: 4 mm Hex
STRING NUT: Bone
NUT WIDTH: 1.12" (28.4 mm)
NUT MATERIAL: Bone
Body
BODY: Laminated Spruce Top with Laminated Mahogany Back and Sides
BODY FINISH: Satin
BODY SHAPE: A-Style Mandolin
BODY TOP: Laminated Spruce
BODY BINDING: Aged White
BODY BACK: Laminated Mahogany
BODY SIDES: Laminated Mahogany
BODY MATERIAL: Laminated Spruce Top with Laminated Mahogany Back and Sides
Customize your tone with the Pre-Wired Stratocaster pickguards. Made with premium components in the same factory as our iconic guitars, this drop-in pickguard is easy to install. Simply remove your old guard, solder the output jack and ground wires, screw in the new guard and you're ready to rock with pure Fender sound.
With slightly hotter output than typical vintage pickups and a powerful combination of magnets, these sonically potent and highly dynamic pickups produce the perfect balance of clean, dirty rhythm and lead tones to satisfy all level of players, through any amplifier. The neck pickup is based on a '54 Strat pickup with oversized alnico 3 magnets. The middle pickup, based on a '63 Strat pickup, uses specially treated alnico magnets and is reverse wound to cancel hum when used with the neck or bridge pickup. The bridge pickup uses alnico 5 magnets and is specially voiced to be hotter without sacrificing that sweet top end sparkle.
General
SERIES: Pre-Wired Pickguards
ORIENTATION: Right-Hand
COLOR: 1-Ply Parchment
INSTRUMENT TYPE: Stratocaster®
COUNTRY OF ORIGIN: US
Hardware
PICKGUARD: 1-Ply Parchment
PICKGUARD PLY: 1-Ply
PICKUP COVERS: Aged White
CONTROL KNOBS: Aged White
SWITCH TIP: Aged White
HARDWARE FINISH: Chrome
Electronics
BRIDGE PICKUP: Custom Eric Johnson Signature Stratocaster® Bridge Pickup
MIDDLE PICKUP: Custom Eric Johnson Signature Stratocaster® RWRP Middle Pickup
NECK PICKUP: Custom Eric Johnson Signature Stratocaster® Neck Pickup
PICKUP CONFIGURATION: SSS
LEAD WIRE: Cloth-covered
MAGNET TYPE: Neck and Middle: Alnico 3, Bridge: Alnico 5
MAGNET WIRE: Formvar-coated
POLE PIECES: Staggered
BOBBIN MATERIAL: Fiber
CONTROLS: Master Volume, Tone 1. (Neck Pickup), Tone 2. (Bridge Pickup)
OUTPUT: Vintage
DC RESISTANCE: Neck: 5.8-6k, Middle: 6.3-6.5k, Bridge: 6.7-6.9k
Customize your tone with the Pre-Wired Stratocaster pickguards. Made with premium components in the same factory as our iconic guitars, this drop-in pickguard is easy to install. Simply remove your old guard, solder the output jack and ground wires, screw in the new guard and you're ready to rock with pure Fender sound.
With slightly hotter output than typical vintage pickups and a powerful combination of magnets, these sonically potent and highly dynamic pickups produce the perfect balance of clean, dirty rhythm and lead tones to satisfy all level of players, through any amplifier. The neck pickup is based on a '54 Strat pickup with oversized alnico 3 magnets. The middle pickup, based on a '63 Strat pickup, uses specially treated alnico magnets and is reverse wound to cancel hum when used with the neck or bridge pickup. The bridge pickup uses alnico 5 magnets and is specially voiced to be hotter without sacrificing that sweet top end sparkle.
Specs
Hardware
PICKGUARD: 3-Ply Parchment
PICKGUARD PLY: 3-Ply
PICKUP COVERS: Aged White
CONTROL KNOBS: Aged White
SWITCH TIP: Aged White
HARDWARE FINISH: Chrome
Electronics
BRIDGE PICKUP: Custom Eric Johnson Signature Stratocaster® Bridge Pickup
MIDDLE PICKUP: Custom Eric Johnson Signature Stratocaster® RWRP Middle Pickup
NECK PICKUP: Custom Eric Johnson Signature Stratocaster® Neck Pickup
PICKUP CONFIGURATION: SSS
LEAD WIRE: Cloth-covered
MAGNET TYPE: Neck and Middle: Alnico 3, Bridge: Alnico 5
MAGNET WIRE: Formvar-coated
POLE PIECES: Staggered
BOBBIN MATERIAL: Fiber
CONTROLS: Master Volume, Tone 1. (Neck Pickup), Tone 2. (Bridge Pickup)
OUTPUT: Vintage
DC RESISTANCE: Neck: 5.8-6k, Middle: 6.3-6.5k, Bridge: 6.7-6.9k