fender
Fender Player Series Stratocaster Reverse Headstock Neck 22MedJum, 9.5", Modern "C" - Maple
$ 299.99 $ 360.00
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
- Model #: 0994562921
Product Specs
General
- Necks
- Right-Hand
- Natural
- Stratocaster®
- MX
Neck
- Maple
- Satin Urethane Finish on Back, Gloss Urethane Finish on Front
- Modern "C"
- 1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
- 4-Bolt
- 9.5" (241 mm)
- Maple
- Black Dot
- Black
- 22
- Standard
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.650" (42 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540” (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (648 mm)
Fender Player Series Stratocaster Reverse Headstock Neck 22MedJum, 9.5", Modern "C" - Pau Ferro
$ 299.99 $ 360.00
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
- Model #: 0994563921
Product Specs
General
- Necks
- Right-Hand
- Natural
- Stratocaster®
- MX
Neck
- Maple
- Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
- Modern "C"
- 1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
- 4-Bolt
- 9.5" (241 mm)
- Pau Ferro
- White Dot
- White
- 22
- Standard
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.650" (42 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540” (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (648 mm)
Fender Player Series Telecaster Reverse Headstock Neck 22MedJum, 9.5", Modern "C - Pau Ferro
$ 299.99 $ 360.00
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Telecaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
- Model #: 0995263921
Product Specs
General
- Necks
- Right-Hand
- Natural
- Stratocaster®
- MX
Neck
- Maple
- Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
- Modern "C"
- 1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
- 4-Bolt
- 9.5" (241 mm)
- Pau Ferro
- White Dot
- White
- 22
- Standard
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.650" (42 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540” (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (648 mm)
Fender Player Stratocaster Electric Guitar - Polar White
$ 799.99 $ 1,040.00
The inspiring sound of a Stratocaster is one of the foundations of Fender. Featuring this classic sound—bell-like high end, punchy mids and robust low end, combined with crystal-clear articulation—the Player Stratocaster is packed with authentic Fender feel and style. It’s ready to serve your musical vision, it’s versatile enough to handle any style of music and it’s the perfect platform for creating your own sound.
- Serial Number: MX21287527
- Weight: 8.0lbs
- Model #: 0144503515
Product Specs
General
- Color: Polar White
- Country Of Origin: MX
- Orientation: Right-Hand
- Series: Player
Neck
- Fingerboard Material: Pau Ferro
- Fingerboard Radius: 9.5" (241 mm)
- Neck Finish: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
- Neck Material: Maple
- Neck Shape: Modern "C"
- Number of Frets: 22
- Nut Material: Synthetic Bone
- Nut Width: 1.650" (42 mm)
- Position Inlays: White Dot
- String Nut: Synthetic Bone
- Truss Rod: Standard
- Truss Rod Nut: 3/16" Hex Adjustment
Hardware
- Bridge: 2-Point Synchronized Tremolo with Bent Steel Saddles
- Bridge Mounting: 2-Point Modern
- Control Knobs: Parchment Plastic
- Hardware Finish: Nickel/Chrome
- Neck Plate: 4-Bolt with "F" Logo
- Pickguard: 3-Ply Parchment
- Pickup Covers: Parchment
- Strap Buttons: Standard
- String Trees: Dual-Wing
- Strings: Fender® USA 250L Nickel Plated Steel (.009-.042 Gauges), PN 0730250403
- Switch Tip: Parchment
- Tremolo Arm: Standard Tremolo Arm
- Tuning Machines: Standard Cast/Sealed
Body
- Body: Alder
- Body Finish: Gloss Polyester
- Body Material: Alder
- Body Shape: Stratocaster®
Electronics
- Bridge Pickup: Player Series Alnico 5 Strat® Single-Coil
- Controls: Master Volume, Tone 1. (Neck/Middle Pickups), Tone 2. (Bridge Pickup)
- Middle Pickup: Player Series Alnico 5 Strat® Single-Coil
- Neck Pickup: Player Series Alnico 5 Strat® Single-Coil
- Pickup Configuration: SSS
- Switching: 5-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
Miscellaneous
- Style: 3 Single-Coil
Accessories
- Included Accessories: None
- Truss Rod Wrench: 3/16" Hex (Allen)
Measurements
- Fret Size: Medium Jumbo
- Scale Length: 25.5" (648 mm)
Fender Player Telecaster Electric Guitar - Black
$ 799.99 $ 831.30
Bold, innovative and rugged, the Player Telecaster is pure Fender, through and through. The feel, the style and, most importantly, the sound—they’re all there, waiting for you to make them whisper or wail for your music. Versatile enough to handle almost anything you can create and durable enough to survive any gig, this workhorse is a trusty sidekick for your musical vision.
- Serial Number: MX24024834
- Weight: 7.8 lbs
- Model #: 0145212506
Product Specs
General
- Color: Black
- Country Of Origin: MX
- Orientation: Right-Hand
- Series: Player
Neck
- Fingerboard Material: Maple
- Fingerboard Radius: 9.5" (241 mm)
- Neck Finish: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
- Neck Material: Maple
- Neck Shape: Modern "C"
- Number of Frets: 22
- Nut Material: Synthetic Bone
- Nut Width: 1.650" (42 mm)
- Position Inlays: Black Dot
- String Nut: Synthetic Bone
- Truss Rod Nut: 3/16" Hex Adjustment
- Truss Rods: Standard
Body
- Body: Alder
- Body Finish: Gloss Polyester
- Body Material: Alder
- Body Shape: Telecaster
Miscellaneous
- Style: 2 Single-Coil
Accessories
- Included Accessories: None
- Truss Rod Wrench: 3/16" Hex (Allen)
Measurements
- Fret Size: Medium Jumbo
- Scale Length: 25.5" (648 mm)
Electronics
- Bridge Pickup: Player Series Alnico 5 Tele® Single-Coil
- Controls: Master Volume, Master Tone
- Neck Pickup: Player Series Alnico 5 Tele Single-Coil
- Pickup Configuration: SS
- Switching: 3-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Neck Pickups, Position 3. Neck Pickup
Hardware
- Bridge: 6-Saddle String-Through-Body Tele® with Block Steel Saddles
- Control Knobs: Knurled Flat-Top
- Hardware Finish: Nickel/Chrome
- Neck Plate: 4-Bolt with "F" Logo
- Pickguard: 3-Ply Parchment
- Strap Buttons: Standard
- String Trees: Dual-Wing
- Strings: Fender® USA 250L Nickel Plated Steel (.009-.042 Gauges), PN 0730250403
- Switch Tip: Barrel Style
- Tuning Machines: Standard Cast/Sealed
Fender Player Telecaster Electric Guitar - Butterscotch Blonde
$ 799.99 $ 978.00
Bold, innovative and rugged, the Player Telecaster is pure Fender, through and through. The feel, the style and, most importantly, the sound—they’re all there, waiting for you to make them whisper or wail for your music. Versatile enough to handle almost anything you can create and durable enough to survive any gig, this workhorse is a trusty sidekick for your musical vision.
- Serial Number: MX23159468
- Weight: 7.8lbs
- Model #: 0145212550
Product Specs
General
- Color: Butterscotch Blonde
- Country Of Origin: MX
- Orientation: Right-Hand
- Series: Player
Neck
- Fingerboard Material: Maple
- Fingerboard Radius: 9.5" (241 mm)
- Neck Finish: Satin Urethane Finish on Back, Gloss Urethane Finish on Front
- Neck Material: Maple
- Neck Shape: Modern "C"
- Number of Frets: 22
- Nut Material: Synthetic Bone
- Nut Width: 1.650" (42 mm)
- Position Inlays: Black Dot
- String Nut: Synthetic Bone
- Truss Rod: Standard
- Truss Rod Nut: 3/16" Hex Adjustment
Body
- Body: Alder
- Body Finish: Gloss Polyester
- Body Material: Alder
- Body Shape: Telecaster®
Hardware
- Bridge: 6-Saddle String-Through-Body Tele® with Block Steel Saddles
- Control Knobs: Knurled Flat-Top
- Hardware Finish: Nickel/Chrome
- Neck Plate: 4-Bolt with "F" Logo
- Pickguard: 3-Ply Parchment
- Strap Buttons: Standard
- String Trees: Dual-Wing
- Strings: Fender® USA 250L Nickel Plated Steel (.009-.042 Gauges), PN 0730250403
- Switch Tip: Barrel Style
- Tuning Machines: Standard Cast/Sealed
Electronics
- Bridge Pickup: Player Series Alnico 5 Tele® Single-Coil
- Controls: Master Volume, Master Tone
- Neck Pickup: Player Series Alnico 5 Tele Single-Coil
- Pickup Configuration: SS
- Switching: 3-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Neck Pickups, Position 3. Neck Pickup
Miscellaneous
- Style: 2 Single-Coil
Accessories
- Included Accessories: None
- Truss Rod Wrench: 3/16" Hex (Allen)
Measurements
- Fret Size: Medium Jumbo
- Scale Length: 25.5" (648 mm)
Fender PO-220E Orchestra Acoustic Guitar - 3 Color Vintage Sunburst
$ 829.99 $ 1,110.12
The Paramount PO-220E combines state-of-the-art craftsmanship with vintage-inspired appointments, delivering the best of both worlds. Built with the choice of a solid spruce or solid mahogany top paired with solid mahogany back and sides, the PO-220E features an offset X-bracing pattern that has been carefully refined to optimize resonance and tone. A Fender and Fishman®-designed pickup amplifies the warm, mid-focused tone of the PO-220E’s newly designed orchestra body shape, while the soundhole-mounted controls preserve the vintage aesthetics. Under the top, a body-sensing pickup enhances the soundboard's vibrations which can then be blended with the undersaddle Sonicore pickup.
Updated cosmetics include snowflake-shaped pearloid fingerboard inlays, feathered purfling, rosette, and backstrip, and a Black or Tiger Stripe pickguard. The PO-220E also features an ovangkol bridge and fingerboard, slim-taper mahogany neck, bone nut and saddle, and comes with a hardshell case.
- Serial Number: CC220311295
- Weight: 4.0lbs
- Model #: 0970350303
Product Specs
General
- Series: Paramount
- Orientation: Right-Hand
- Color: 3 Color Vintage Sunburst
- Country Of Origin: CN
Neck
- Headstock Binding: 3-Ply W/B/W
- Neck Material: Mahogany
- Neck Finish: Satin Urethane with Gloss Polyester Headstock
- Neck Shape: "C" Shape
- Fingerboard Radius: 15.75" (400 mm)
- Fingerboard Material: Ovangkol
- Position Inlays: Snowflake
- Side Dots: Black
- Number of Frets: 20
- Truss Rod: Dual-Action
- String Nut: Bone
- Nut Width: 1.69" (43 mm)
- Nut Material: Bone
Body
- Body: Solid Mahogany
- Body Finish: Gloss Polyester
- Body Shape: Orchestra
- Body Top: Solid Sitka Spruce
- Body Binding: Aged White with Feathered Checkered Purfling
- Body Back: Solid Mahogany
- Body Sides: Solid Mahogany
- Body Material: Solid Mahogany
- Rosette: Feathered Checkered
Hardware
- Bridge: Ovangkol
- Bridge Pins: Ebony with Mother-of-Pearl Dots
- Pickguard: 1-Ply Tiger Striped
- Hardware Finish: Nickel-Plated
- Tuning Machines: Nickel Open-Back
- Strings: Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
Electronics
- Controls: Volume, Blend (Body Pickup, Piezo)
- Special Electronics: Fender®/Fishman® Sonitone™ Plus Soundhole Pickup System
Accessories
- Truss Rod Wrench: 4 mm Hex (Allen)
Measurements
- Fret Size: 2mm
- Scale Length: 25.3" (643 mm)
Fender PO-220E Orchestra Acoustic Guitar - Natural
$ 829.99 $ 1,110.12
The Paramount PO-220E combines state-of-the-art craftsmanship with vintage-inspired appointments, delivering the best of both worlds. Built with the choice of a solid spruce or solid mahogany top paired with solid mahogany back and sides, the PO-220E features an offset X-bracing pattern that has been carefully refined to optimize resonance and tone. A Fender and Fishman®-designed pickup amplifies the warm, mid-focused tone of the PO-220E’s newly designed orchestra body shape, while the soundhole-mounted controls preserve the vintage aesthetics. Under the top, a body-sensing pickup enhances the soundboard's vibrations which can then be blended with the undersaddle Sonicore pickup.
Updated cosmetics include snowflake-shaped pearloid fingerboard inlays, feathered purfling, rosette, and backstrip, and a Black or Tiger Stripe pickguard. The PO-220E also features an ovangkol bridge and fingerboard, slim-taper mahogany neck, bone nut and saddle, and comes with a hardshell case.
- Serial Number: CC220121140
- Weight: 3.8lbs
- Model #: 0970350321
Product Specs
General
- Series: Paramount
- Orientation: Right-Hand
- Color: Natural
- Country Of Origin: CN
Neck
- Headstock Binding: 3-Ply W/B/W
- Neck Material: Mahogany
- Neck Finish: Satin Urethane with Gloss Polyester Headstock
- Neck Shape: "C" Shape
- Fingerboard Radius: 15.75" (400 mm)
- Fingerboard Material: Ovangkol
- Position Inlays: Snowflake
- Side Dots: Black
- Number of Frets: 20
- Truss Rod: Dual-Action
- String Nut: Bone
- Nut Width: 1.69" (43 mm)
- Nut Material: Bone
Body
- Body: Solid Mahogany
- Body Finish: Gloss Polyester
- Body Shape: Orchestra
- Body Top: Solid Sitka Spruce
- Body Binding: Aged White with Feathered Checkered Purfling
- Body Back: Solid Mahogany
- Body Sides: Solid Mahogany
- Body Material: Solid Mahogany
- Rosette: Feathered Checkered
Hardware
- Bridge: Ovangkol
- Bridge Pins: Ebony with Mother-of-Pearl Dots
- Pickguard: 1-Ply Tiger Striped
- Hardware Finish: Nickel-Plated
- Tuning Machines: Nickel Open-Back
- Strings: Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
Electronics
- Controls: Volume, Blend (Body Pickup, Piezo)
- Special Electronics: Fender®/Fishman® Sonitone™ Plus Soundhole Pickup System
Accessories
- Truss Rod Wrench: 4 mm Hex (Allen)
Measurements
- Fret Size: 2mm
- Scale Length: 25.3" (643 mm)
Fender Pre-Wired Eric Johnson Strat Pickguard - Parchment 8 Hole PG
$ 329.99 $ 360.00
Customize your tone with the Pre-Wired Stratocaster pickguards. Made with premium components in the same factory as our iconic guitars, this drop-in pickguard is easy to install. Simply remove your old guard, solder the output jack and ground wires, screw in the new guard and you're ready to rock with pure Fender sound.
With slightly hotter output than typical vintage pickups and a powerful combination of magnets, these sonically potent and highly dynamic pickups produce the perfect balance of clean, dirty rhythm and lead tones to satisfy all level of players, through any amplifier. The neck pickup is based on a '54 Strat pickup with oversized alnico 3 magnets. The middle pickup, based on a '63 Strat pickup, uses specially treated alnico magnets and is reverse wound to cancel hum when used with the neck or bridge pickup. The bridge pickup uses alnico 5 magnets and is specially voiced to be hotter without sacrificing that sweet top end sparkle.
General
- Pre-Wired Pickguards
- Right-Hand
- 1-Ply Parchment
- Stratocaster®
- US
Hardware
- 1-Ply Parchment
- PICKGUARD PLY: 1-Ply
Electronics
Fender Pre-Wired Strat Pickguard Eric Johnson Signautre - Parchment 11 Hole PG
$ 329.99 $ 360.00
Customize your tone with the Pre-Wired Stratocaster pickguards. Made with premium components in the same factory as our iconic guitars, this drop-in pickguard is easy to install. Simply remove your old guard, solder the output jack and ground wires, screw in the new guard and you're ready to rock with pure Fender sound.
With slightly hotter output than typical vintage pickups and a powerful combination of magnets, these sonically potent and highly dynamic pickups produce the perfect balance of clean, dirty rhythm and lead tones to satisfy all level of players, through any amplifier. The neck pickup is based on a '54 Strat pickup with oversized alnico 3 magnets. The middle pickup, based on a '63 Strat pickup, uses specially treated alnico magnets and is reverse wound to cancel hum when used with the neck or bridge pickup. The bridge pickup uses alnico 5 magnets and is specially voiced to be hotter without sacrificing that sweet top end sparkle.
Specs
Hardware
- 3-Ply Parchment
- 3-Ply
- Aged White
- Aged White
- Aged White
- Chrome
Electronics
- Custom Eric Johnson Signature Stratocaster® Bridge Pickup
- Custom Eric Johnson Signature Stratocaster® RWRP Middle Pickup
- Custom Eric Johnson Signature Stratocaster® Neck Pickup
- SSS
- Cloth-covered
- Neck and Middle: Alnico 3, Bridge: Alnico 5
- Formvar-coated
- Staggered
- Fiber
- Master Volume, Tone 1. (Neck Pickup), Tone 2. (Bridge Pickup)
- Vintage
- Neck: 5.8-6k, Middle: 6.3-6.5k, Bridge: 6.7-6.9k
- Neck/Middle: 2.5-2.7 Henries, Bridge: 2.9-3.1 Henries
- CTS 250K
Measurements
- DIMENSIONS: 2.20x10.70x13.40 IN
Fender Pro Junior IV Guitar Amplifier - Lacquered Tweed
$ 649.99 $ 868.00
Long-revered by players of all stripes, the 15-watt Pro Junior IV adds a modified volume circuit and a classic tweed appearance to this workhorse amplifier. A compact and straightforward tone machine, this amp is ideal for performing guitarists who need great tone and remarkably touch-sensitive dynamic response.
- Model #: 2231300000
Product Specs
General
- Amplifier Type: Tube
- Color: Lacquered Tweed
- Country Of Origin: MX
- Series: Hot Rod
Electronics
- Channels: One
- Connection Type: Non-IEC
- Control Panel: Volume, Tone
- Controls: Volume, Tone
- Effects Loop: NA
- Inputs: One - 1/4"
- Voltage: 120V
- Wattage: 15 Watts
Hardware
- Amplifier Covering: Lacquered Tweed
- Amplifier Jewel: Red LED
- Cabinet Material: 3/4" Particle Board
- Control Knobs: Chicken-Head Style Pointer - Black
- Front Panel: Chrome
- Grille Cloth: 50s Style
- Handle: Vintage Leather Strap
Speakers
- Speakers: One - 10" Jensen® P10R Alnico
- Total Impedance: 8 ohms
Tubes
- Power Tubes: 2 x EL84
- Preamp Tubes: 2 x 12AX7
- Rectifier: Solid State
Miscellaneous
- Power Cable: Non-IEC
Accessories
- Footswitch: NA
Measurements
- Power Tubes: 2 x EL84
- Product Depth: 8.75" (22.22 cm)
- Product Height: 14.5" (36.8 cm)
- Product Width: 15.25" (38.73 cm)
Fender Pro Junior IV SE Combo Guitar Amplifier - Black
$ 549.99 $ 736.00
Long-revered by players of all stripes, the Fender Pro Junior amp is a compact and straightforward 15-watt all-tube tone machine. It’s ideal for guitarists who enjoy touch-sensitive dynamic response and great clean-to-mean tones with an uncluttered feature set.
The new Limited Edition Pro Junior IV SE is a simplified alternative to our core Lacquered Tweed model. It comes equipped with a Fender Special Design speaker for tight, well-balanced output with plenty of high-end sparkle. Its stage- and studio-ready style features black vinyl covering, aged silver grille cloth, and a chrome control panel with red jewel light, giving it the unmistakable look and vibe that’s classic Fender. Fun, flexible and pedal-friendly, the Pro Junior IV SE is an ideal addition to any electric guitarist’s amp collection.
- Model #: 2231300010
Product Specs
General
- Amplifier Type: Tube
- Color: Black
- Country Of Origin: MX
- Series: Hot Rod
Electronics
- Channels: One
-
Control Panel: Volume, Tone
- Controls: Volume, Tone
-
Inputs: One - 1/4"
- Voltage: 120V
- Wattage: 15 Watts
Hardware
-
Amplifier Jewel: Red LED
- Cabinet Material: 3/4" Particle Board
- Control Knobs: Black Plastic
- Front Panel: Chrome
- Grille Cloth: Aged Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
Speakers
- Speakers: One - 10" Fender® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: 2 x EL84
- Preamp Tubes: 2 x 12AX7
- Rectifier: Solid State
Accessories
- Footswitch: NA
Measurements
- Power Tubes: 2 x EL84
- Product Depth: 8.75" (22.22 cm)
- Product Height: 14.5" (36.8 cm)
- Product Width: 15.25" (38.73 cm)
Fender Professional Large Pedal Board
$ 269.99 $ 324.00
Surprisingly simple and remarkably versatile – the Fender® Professional Pedal Board delivers world-class performance and utility. The low-profile precision-machined anodized-aluminum chassis is lightweight and strong enough to stand up to the rigors of the road, while the thoughtfully designed cable routing and management system allows you to keep things neat and tidy, even if your board is overflowing with pedals. Under the hood, a universal mounting bracket fits most popular pedal power-supplies – and is a perfect match for the Fender Engine Room series. The included soft case with storage pocket and cable ties will keep your pedals and accessories safe on the way to the gig, studio or any other destination.
- Model #: 0991084003
Dimensions –
Small - W 18” x D 12.8” x H 2.95”
Medium - W 24” x D 12.8” x H 2.95”
Large - W 32” x D 16” x H 2.95”
Product Specs
General
- Series: Pedal Board
- Color: Anodized Aluminum
- Material: Anodized Aluminum
- Country Of Origin: CN
Miscellaneous
- Case Pack Qty: 3
- Size: L
Measurements
- Dimensions: 9.00x19.00x34.50 IN
Fender Professional Small Pedal Board
$ 174.99 $ 204.00
Surprisingly simple and remarkably versatile – the Fender® Professional Pedal Board delivers world-class performance and utility. The low-profile precision-machined anodized-aluminum chassis is lightweight and strong enough to stand up to the rigors of the road, while the thoughtfully designed cable routing and management system allows you to keep things neat and tidy, even if your board is overflowing with pedals. Under the hood, a universal mounting bracket fits most popular pedal power-supplies – and is a perfect match for the Fender Engine Room series. The included soft case with storage pocket and cable ties will keep your pedals and accessories safe on the way to the gig, studio or any other destination.
- Model #: 0991084001
Dimensions –
Small - W 18” x D 12.8” x H 2.95”
Medium - W 24” x D 12.8” x H 2.95”
Large - W 32” x D 16” x H 2.95”
Product Specs
General
- Series: Pedal Board
- Color: Anodized Aluminum
- Material: Anodized Aluminum
- Country Of Origin: CN
Miscellaneous
- Case Pack Qty: 3
- Size: S
Measurements
- Dimensions: 8.50x15.50x20.50 IN
Fender Pure Vintage 52 Telecaster Pickups
$ 149.99 $ 180.00
Pure Vintage '52 Tele pickups speak with an authentically vintage-style voice with classic Telecaster snap and twang. Built with alnico 3 magnets and enamel-coated magnet wire, with traditional copper-plated steel base plate on the bridge pickup. From vintage bobbin construction to genuine original-era cloth wiring, all Fender Pure Vintage pickups are wound to precise specifications for authentic, traditional Fender tone and performance.
Features
- Enamel-coated magnet wire for warm vintage tone
- Flush-mount pole pieces for even string response
- Alnico 3 magnets for sweet midrange and tight bass
- Period-correct cloth output wire and fiber bobbin
- Copper-plated steel base plate
- Installation hardware included
General
- Pure Vintage
- Universal
- Nickel
- Neck: Nickel; Bridge: Black
- Telecaster®
- US
Electronics
- SS
- Cloth-covered
- Alnico 3
- Enamel-coated
- Flush-mount
- Fiber
- Vintage
- Neck: 7.2k, Bridge: 6.6k
- Neck: 2.4 Henries, Bridge: 3.8 Henries
Miscellaneous
- WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
- 9209940000
- 10
- Pure Vintage
- Recommended for Blues, Rock, Classic Rock, Country, and Pop.
- Vintage
Fender Redondo Mini Acoustic Guitar - Sunburst
Sold Out $ 260.00
The Redondo Mini packs a big punch into a smaller sized acoustic guitar. Featuring a spruce top paired with mahogany back and sides, this guitar has a 22 ¾” scale length, but delivers the tone of a full-sized guitar. Like all models in the California Series, the Redondo Mini features a 6-in-line Strat headstock inspired by Fender’s electric legacy.
Other premium features include a walnut fingerboard and bridge, Nubone nut and saddle.Whether you’re a young, aspiring player looking for a smaller instrument, or simply looking for a top-notch guitar that’s easy to travel with, the Redondo Mini has you covered.
- Serial Number: IWA2157294
- Weight: 3.0lbs
- Model #: 0970710103
Product Specs
General
- Color: Sunburst
- Country Of Origin: ID
- Orientation: Right-Hand
- Series: California
Neck
- Fingerboard Material: Walnut
- Fingerboard Radius: 15.75" (400 mm)
- Headstock: Stratocaster®
- Neck Finish: Satin Polyurethane
- Neck Material: Nato
- Neck Shape: "C" Shape
- Number of Frets: 18
- Nut Material: Nu-Bone™
- Nut Width: 1.69" (43 mm)
- Position Inlays: White Dot
- String Nut: Nu-Bone™
- Truss Rod: Dual-Action
Body
- Body: Mahogany
- Body Back: Mahogany
- Body Binding: Multiple
- Body Finish: Satin
- Body Material: Mahogany
- Body Shape: Redondo Mini
- Body Sides: Mahogany
- Body Top: Spruce
- Bracing: Scalloped X
- Rosette: 2-Ring B/W/B
Hardware
- Bridge: Walnut
- Bridge Pins: White with Black Dots
- Hardware Finish: Nickel
- Pickguard: None
- Strap Buttons: Factory Mounted Forward Strap Button with Internal Block Reinforcement
- Strings: Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
- Tuning Machines: Vintage-Style with Aged White Plastic Buttons
Electronics
- Controls: NA
Accessories
- Included Accessories: Gig Bag
Measurements
- Fret Size: 2.4mm
- Scale Length: 22.75” (578 mm)
Fender Redondo Mini Acoustic Guitar - Sunburst
$ 199.99 $ 260.00
The Redondo Mini packs a big punch into a smaller sized acoustic guitar. Featuring a spruce top paired with mahogany back and sides, this guitar has a 22 ¾” scale length, but delivers the tone of a full-sized guitar. Like all models in the California Series, the Redondo Mini features a 6-in-line Strat headstock inspired by Fender’s electric legacy.
Other premium features include a walnut fingerboard and bridge, Nubone nut and saddle.Whether you’re a young, aspiring player looking for a smaller instrument, or simply looking for a top-notch guitar that’s easy to travel with, the Redondo Mini has you covered.
- Serial Number: IWA2402873
- Weight: 3.2 lbs
- Model #: 0970710103
Specs
General
- Color: Sunburst
- Country Of Origin: ID
- Orientation: Right-Hand
- Series: California
Neck
- Fingerboard Material: Walnut
- Fingerboard Radius: 15.75" (400 mm)
- Headstock: Stratocaster®
- Neck Finish: Satin Polyurethane
- Neck Material: Nato
- Neck Shape: "C" Shape
- Number of Frets: 18
- Nut Material: Nu-Bone™
- Nut Width: 1.69" (43 mm)
- Position Inlays: White Dot
- String Nut: Nu-Bone™
- Truss Rod: Dual-Action
Body
- Body: Mahogany
- Body Back: Mahogany
- Body Binding: Multiple
- Body Finish: Satin
- Body Material: Mahogany
- Body Shape: Redondo Mini
- Body Sides: Mahogany
- Body Top: Spruce
- Bracing: Scalloped X
- Rosette: 2-Ring B/W/B
Hardware
- Bridge: Walnut
- Bridge Pins: White with Black Dots
- Hardware Finish: Nickel
- Pickguard: None
- Strap Buttons: Factory Mounted Forward Strap Button with Internal Block Reinforcement
- Strings: Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
- Tuning Machines: Vintage-Style with Aged White Plastic Buttons
Electronics
- Controls: NA
Accessories
- Included Accessories: Gig Bag
Measurements
- Fret Size: 2.4mm
- Scale Length: 22.75” (578 mm)
Fender Redondo Player Acoustic Guitar - Candy Apple Red
$ 449.99 $ 699.99
Crafted with an X-braced solid spruce top and sapele back and sides, the dreadnought body of the Redondo Player produces a deep, robust voice with exceptional projection and volume for a wide variety of musical settings. The nato neck is designed with an easy-to-play slim “C”-shaped profile, a 25.5" scale length, and a tilt-back 6-in-line headstock for a distinctive look born from Fender’s electric guitar DNA. Other notable details include vintage-style tuning machines for smooth, accurate tuning, a GraphTech® NuBone® nut and saddle for detailed harmonic character. With elegantly integrated controls for a sleek, modern look, the onboard Fishman® Flex preamp system allows faithful reproduction of the guitar’s natural sound when plugged into an amplifier or recording device.
Bold, eye-catching and unique, California Series instruments make no compromises, balancing effortless playability, superior sound, and standout style for those who aspire to play something different.
- Serial Number: IWA2308528
- Weight: 4.6lbs
Product Specs
- Model Name: Redondo Player, Walnut Fingerboard, White Pickguard, Candy Apple Red
- Model #: 0970713209
- Series: California
- Country Of Origin: ID
- Color: Candy Apple Red
- Body: Solid Spruce Top with Laminated Sapele Back and Sides
- Body Finish: Satin
- Body Shape: Redondo
- Neck Material: Nato
- Neck Finish: Satin Urethane
- Neck Shape: Slim "C"
- Scale Length: 25.6" (650 mm)
- Fingerboard: Walnut
- Fingerboard Radius: 15.75" (400 mm)
- Number of Frets: 20
- String Nut: Graph Tech® NuBone™
- Nut Width: 1.69" (43 mm)
- Position Inlays: White Dot
- Electronics: Fishman Flex
- Controls: Volume, Push Tone Knob for Phase Control
- Bridge: Modern Viking
- Hardware Finish: Chrome
- Tuning Machines: Vintage Style
- Pickguard: 3-Ply White
- Strings: Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
Fender Redondo Player Acoustic Guitar - Lake Placid Blue
$ 449.99 $ 500.00
Inspired by the iconic designs of Fender electric guitars, California Player acoustics evoke the west coast spirit of adventure and freedom, inviting musicians to explore their individual creativity and disrupt the status quo.
Crafted with an X-braced solid spruce top and sapele back and sides, the dreadnought body of the Redondo Player produces a deep, robust voice with exceptional projection and volume for a wide variety of musical settings. The nato neck is designed with an easy-to-play slim "C"-shaped profile, a 25.5" scale length, and a tilt-back 6-in-line headstock for a distinctive look born from Fender's electric guitar DNA. Other notable details include vintage-style tuning machines for smooth, accurate tuning, a GraphTech® NuBone® nut and saddle for detailed harmonic character. With elegantly integrated controls for a sleek, modern look, the onboard Fishman® Flex preamp system allows faithful reproduction of the guitar's natural sound when plugged into an amplifier or recording device.
Bold, eye-catching and unique, California Series instruments make no compromises, balancing effortless playability, superior sound, and standout style for those who aspire to play something different.
Serial Number: IWA2342171
Weight: 4.8 lbs
Specs
Neck
- Tilt-Back Stratocaster®
- Nato
- Satin Urethane
- Slim "C"
- 15.75" (400 mm)
- Walnut
- White Dot
- 20
- Modern Heel Adjust
- 4 mm Hex
- Graph Tech® NuBone™
- 1.69" (43 mm)
- Graph Tech® NuBone™
Body
- Solid Spruce Top with Laminated Sapele Back and Sides
- Satin
- Redondo
- Solid Sitka Spruce
- Aged White
- Sapele
- Sapele
- Redondo
- Solid Spruce Top with Laminated Sapele Back and Sides
- Yes
- Scalloped X
- 10.83" (275 mm)
- 2-Ring B/W/B
- 100mm Diameter Soundhole
Hardware
- Modern Viking
- Aged White with Black Dots
- 3-Ply Tortoiseshell
- Nickel
- Vintage-Style
- Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
- Vintage-Style
Electronics
- Volume, Tone, Push Tone Knob For Phase Control
- Fishman® Flex
Fender Reflecting Pool Delay and Reverb pedal
Sold Out $ 419.98
The relationship between time-based effects, like delay and reverb, is critical to operating them correctly. The Reflecting Pool® Delay/Reverb pedal combines these two classic effects into one comprehensive chassis, making it easy to integrate into any pedalboard. Utilizing cutting-edge DSP for rich and complex algorithms, Reflecting Pool® faithfully recreates classic sounds, while also conjuring otherworldly new ones. Type, Variation and Quality controls make it easy to precisely shape your sound, the Time toggle adds rhythmic subdivisions, and the Tap Tempo footswitch makes sure everything stays in time.
Designed by our in-house team of experts, the Reflecting Pool® Delay/Reverb is an all-original Fender circuit. The chassis is crafted from lightweight, durable anodized aluminum, and the Amp Jewel LED gives your pedalboard the classic Fender look. The switchable LED-backlit knobs show your control settings on a dark stage at a glance.
- Model #: 0234546000
Product Specs
General
- Country Of Origin: CN
- Material: Anodized Aluminum
- Series: Fender® Pedals
Electronics
- Power Consumption: 250mA
- Power Requirements: AC Adaptor-9V DC center negative (not included)
Miscellaneous
- Case Pack Qty: 12
Fender Rincon Tenor Ukulele - Aged Cognac Burst
Sold Out $ 252.00
Named after one of the most famous surf spots in Southern California, Fender’s Rincon model has a rich, deep voice and is packed with unique style. Constructed completely from ovangkol, this tenor-sized uke provides enhanced resonance and volume, singing with full-bodied chime. The Rincon comes equipped with Fender®-Designed electronics for players who want to bring their music from the beach to the stage.
Other notable features include a no-tie bridge for quick, easy string changes, a bone nut and saddle for superior intonation. An open pore satin finish, abalone rosette, vintage-style closed-back tuning machines and a 4-in-line Strat® headstock round out this Fender’s unmistakably classic look.
- Serial Number: CRKF22000145
- Weight: 1.4 lbs
- Model #: 0970452137
Product Specs
General
- California Coast
- Right-Hand
- Aged Cognac Burst
- CN
Neck
- Nato
- Satin Urethane
- Flat
- Walnut
- White Dot
- 19
- Bone
- 1.375" (35 mm)
- Bone
Body
- Ovangkol
- Open Pore Satin
- Tenor Ukulele
- Ovangkol
- Ovangkol
- Ovangkol
- Ovangkol
- Fan
- Abalone
Hardware
- Walnut, Pull-through
- N/A
- Nickel
- Sealed Nickel
- Standard Tenor Uke
Electronics
- Volume, Tone, Integrated Electronic Tuner with On/Off Switch, Low Battery Indicator Light
- Fender® FE-U01 Preamp
Measurements
- 1.5mm
- 17" (432 mm)
Fender Roasted Maple Jazz Bass Neck 20 Medium Jumbo Frets/9.5"/Maple/C Shape
$ 399.99 $ 480.00
There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice.
This genuine Fender Jazz Bass neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring a comfortable "Modern C"-shaped profile and 9.5"-radius maple fingerboard with 20 medium-jumbo frets, this neck was designed for pure playability. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. The perfect way to give your J Bass® authentic Fender feel, this replacement neck even sports our famous “spaghetti” logo on the headstock.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Product Specs
- Model Name: Roasted Maple Jazz Bass Neck, 20 Medium Jumbo Frets, 9.5", Maple, C Shape
- Model #: 0990702920
- Series: Necks
- Country Of Origin: MX
- Color: Natural
- Dimensions: 3.40x8.20x36.90 IN
- Weight: 3.35 LB
- Commodity: 9209940000
Fender Rumble 100 (V3) Bass Amplifier - Black/Silver
$ 329.99 $ 427.26
For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.
The stylish Rumble 100 combo pumps 100 watts of pure Fender bass muscle and finesse. Lighter and louder than ever, it's built with great features including classic Fender styling, 12" Eminence® speaker, overdrive circuit, versatile three-button voicing and more. A must-have combo for any bassist.
- Model #: 2370400000
Product Specs
General
- Amplifier Type: Class-D
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
- Connection Type: IEC
- Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Effects Loop: 1/4" (Send/Return)
- Inputs: One - 1/4"
- Line Out: One - (XLR with Ground Lift)
- Voltage: 120V
- Wattage: 100 Watts at 8 Ohms
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: Lightweight Plywood
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Speakers
- Speakers: One - 12" Eminence® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Miscellaneous
- Power Cable: IEC
Accessories
- Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)
Measurements
- Power Tubes: NA
- Product Depth: 14" (35.56 cm)
- Product Height: 18.5" (47.0 cm)
- Product Width: 16.5" (41.91 cm)
Fender Rumble 115 (V3) Bass Amplifier - Black/Silver
$ 399.99 $ 532.00
- Model #: 2370900000
Product Specs
General
- Series: Rumble™
- Color: Black and Silver
- Amplifier Type: Speaker Enclosure
- Country Of Origin: ID
- Platform: Rumble
Electronics
- Inputs: NA
- Power Handling: 600 watts program (300 watts continuous)
Hardware
- Amplifier Covering: Black Textured Vinyl
- Cabinet Material: Lightweight Plywood
- Grille Cloth: Silver
- Handle: Recessed Side-Mounted Steel Bar (2)
- Casters: Pop-out Casters Included
- Speaker Jack: One 1/4", One Speakon
Speakers
- Speakers: One - 15" Eminence®-Designed Ceramic Magnet Speaker
- Total Impedance: 8 ohms
Measurements
- Product Depth: 14.5" (36.8 cm)
- Product Height: 20.75" (52.7 cm)
- Product Width: 23" (58.42 cm)
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2025 Huber Breese Music. Powered by Shopify
