Gibson
Gibson ES Supreme Electric Guitar - Bourbon Burst
$ 4,299.00 $ 5,158.00
Supreme Versatility Meets Supreme Beauty
The Gibson ES-335 has always been known as an exceptionally versatile guitar. Regardless of your stylistic preferences or what the gig calls for, it can cover it with aplomb. The ES Supreme expands on that legendary versatility and adds features that take the ES™ to new heights of beauty, including a 3-ply body with a AAA figured maple top, Super Split Block mother-of-pearl neck inlays, gold hardware, and a striking new mother-of-pearl headstock inlay inspired by a design from the 1940s that was discovered in the Gibson archives. Smooth playability is ensured by the mahogany neck with its Rounded C profile and compound radius ebony fretboard, while the famous ES sonic versatility is enhanced even further with the addition of push/pull volume pots for coil tapping the Burstbucker™ Rhythm Pro and Burstbucker Lead Pro pickups. The Ebony 3-pickup exclusive adds in a Burstbucker Mid Pro for an even wider tonal range. It all comes together to make this the ES that reigns supreme. A hardshell case is also included.
Serial Number: 217940178
Weight: 8.4 lbs
Specs
Body
- Body Style: ES
- Body Shape: ES-335
- Body Material: 3-ply AAA Maple/Poplar/Maple
- Top: 3-ply AAA Maple/Poplar/Maple
- Back: 3-ply AAA Maple/Poplar/Maple
- Side: 3-ply AAA Maple/Poplar/Maple
- Bracing: Spruce
- Centerblock: Maple
- Binding: 5-ply
- Body Finish: Gloss Nitrocellulose Lacquer
Neck
- Profile: Rounded "C"
- Scale Length: 628.65 mm / 24.75 in
- Fingerboard Material: Ebony
- Fingerboard Radius: Compound
- Neck Material: Mahogany
- Fret Count: 22
- Frets: Medium Jumbo
- Nut Material: Graph Tech
- Nut Width: 43.053 mm / 1.695 in
- End Of Board Width: 57.404 mm / 2.26 in
- Inlays: Mother of Pearl Super Split Block
- Joint: Glued In, Set Neck
Hardware
- Finish: Gold
- Bridge: Aluminum Nashville Tune-O-Matic
- Tailpiece: Aluminum Stop Bar
- Tuning Machines: Grover Locking Keystone
- Pickguard: Black, 5-ply
- Truss Rod: Adjustable
- Control Knobs: Black Top Hat with Gold Insert
- Switch Tip: Black
- Strap Buttons: 2
Electronics
- Neck Pickup: Burstbucker Rhythm Pro
- Bridge Pickup: Burstbucker Lead Pro
- Controls: 2 Push/Pull Volume (Coil Tap), 2 Tone
- Pickup Selector: 3-way Toggle
- Output Jack: 1/4"
Miscellaneous
- Strings Gauge: .010, .013, .017, .026, .036, .046
- Case: Hardshell
- Accessories: Includes Gibson Accessory Kit
Gibson ES-330 Electric Guitar - Sixties Cherry
$ 3,499.00 $ 4,198.00
ES-330
Thinline, full-hollowbody electric guitar with 3-ply maple/poplar/maple body, mahogany neck with Rounded C profile, Indian rosewood fretboard with small block acrylic inlays, and Dogear P-90 pickups hand-wired to 500k pots and Orange Drop capacitors, hardshell case included
Serial Number: 220140334
Weight: 6.4 lbs
Specs
Body
- Body Style: ES
- Body Shape: ES-330
- Body Material: 3-ply Maple/Poplar/Maple
- Top: 3-ply Maple/Poplar/Maple
- Back: 3-ply Maple/Poplar/Maple
- Side: 3-ply Maple/Poplar/Maple
- Bracing: Spruce
- Centerblock: None
- Binding: Single Ply Cream, Top, Back, and Fretboard
- Body Finish: Gloss Nitrocellulose Lacquer
Neck
- Profile: Rounded "C"
- Scale Length: 628.65 mm / 24.75 in
- Fingerboard Material: Indian Rosewood
- Fingerboard Radius: 304.8 mm / 12 in
- Neck Material: Mahogany
- Fret Count: 22
- Frets: Medium Jumbo
- Nut Material: Graph Tech
- Nut Width: 43.053 mm / 1.695 in
- End Of Board Width: 57.404 mm / 2.26 in
- Inlays: Acrylic Small Block
- Joint: Glued In, Set Neck
Hardware
- Finish: Nickel
- Bridge: ABR-1 Tune-O-Matic
- Tailpiece: Trapeze
- Tuning Machines: Vintage Deluxe with White Button
- Pickguard: Black 5-ply
- Truss Rod: Adjustable
- Control Knobs: Black Top Hat
- Switch Tip: Cream
- Strap Buttons: 2
Electronics
- Neck Pickup: Dogear P-90
- Bridge Pickup: Dogear P-90
- Controls: 2 Volume, 2 Tone; Hand-wired with 500k Potentiometers and Orange Drop Capacitors
- Pickup Selector: 3-way Toggle
- Output Jack: 1/4"
Miscellaneous
- Strings Gauge: .010, .013, .017, .026, .036, .046
- Case: Hardshell
- Accessories: Includes Gibson Accessory Kit
Gibson ES-330 Electric Guitar - Tobacco Sunburst
$ 3,499.00 $ 4,198.00
ES-330
Thinline, full-hollowbody electric guitar with 3-ply maple/poplar/maple body, mahogany neck with Rounded C profile, Indian rosewood fretboard with small block acrylic inlays, and Dogear P-90 pickups hand-wired to 500k pots and Orange Drop capacitors, hardshell case included
Serial Number: 229940103
Weight: 6.2 lbs
Specs
Body
- Body Style: ES
- Body Shape: ES-330
- Body Material: 3-ply Maple/Poplar/Maple
- Top: 3-ply Maple/Poplar/Maple
- Back: 3-ply Maple/Poplar/Maple
- Side: 3-ply Maple/Poplar/Maple
- Bracing: Spruce
- Centerblock: None
- Binding: Single Ply Cream, Top, Back, and Fretboard
- Body Finish: Gloss Nitrocellulose Lacquer
Neck
- Profile: Rounded "C"
- Scale Length: 628.65 mm / 24.75 in
- Fingerboard Material: Indian Rosewood
- Fingerboard Radius: 304.8 mm / 12 in
- Neck Material: Mahogany
- Fret Count: 22
- Frets: Medium Jumbo
- Nut Material: Graph Tech
- Nut Width: 43.053 mm / 1.695 in
- End Of Board Width: 57.404 mm / 2.26 in
- Inlays: Acrylic Small Block
- Joint: Glued In, Set Neck
Hardware
- Finish: Nickel
- Bridge: ABR-1 Tune-O-Matic
- Tailpiece: Trapeze
- Tuning Machines: Vintage Deluxe with White Button
- Pickguard: Black 5-ply
- Truss Rod: Adjustable
- Control Knobs: Black Top Hat
- Switch Tip: Cream
- Strap Buttons: 2
Electronics
- Neck Pickup: Dogear P-90
- Bridge Pickup: Dogear P-90
- Controls: 2 Volume, 2 Tone; Hand-wired with 500k Potentiometers and Orange Drop Capacitors
- Pickup Selector: 3-way Toggle
- Output Jack: 1/4"
Miscellaneous
- Strings Gauge: .010, .013, .017, .026, .036, .046
- Case: Hardshell
- Accessories: Includes Gibson Accessory Kit
Gibson ES-335 Electric Guitar - Ocean Blue
$ 3,499.00 $ 4,198.00
The ES-335 is a Gibson ES™ model that has been wowing guitar players all over the world for over six decades. From its introduction in 1958, the Gibson ES-335 set an unmatched standard, and it remains one of the world's most beloved and versatile electric guitars today. Regardless of the styles of music you play, from rock to blues, from country to metal, the ES-335’s versatility enables you to do them all. This ES-335 is no exception and is now available in exciting custom colors that are sure to get attention.
The ES-335’s body is crafted with layered maple/poplar/maple for the top, back, and sides. It is coupled with a solid maple centerblock to create the amazing sustain, warmth, and resonant tone that players crave in a semi-hollowbody instrument. The solid maple center block also helps in controlling the unwanted feedback that often plagues full hollowbody guitars. The mahogany neck has a Rounded C profile that is extremely comfortable and easy to play. It’s not too large or too small, but “just right” for many players. It is capped with a rosewood fretboard with a 12” radius that makes it easy to play chords and bend strings without fretting out, and that is adorned with acrylic dot inlays, and equipped with 22 medium jumbo frets. A Graph Tech® nut and Vintage Deluxe tuners with Keystone buttons help maintain tuning stability, while the nickel-plated ABR-1 Tune-O-Matic™ bridge and aluminum Stop Bar tailpiece anchor the strings solidly at the other end to deliver the outstanding sustain that the ES-335 is famous for. Gibson’s Calibrated T-Type humbucker™ pickups in the lead (bridge) and rhythm (neck) positions deliver a wide range of tones and further reinforce the ES-335’s exceptional versatility. They are hand-wired to individual volume and tone controls with 500k potentiometers and Orange Drop® tone capacitors, along with a three-way pickup selector switch that lets you Body Shape Material Top Binding Finishes Available Watermelon Orange Drop® tone capacitors, along with a three-way pickup selector switch that lets you run either pickup individually or combine them at will in any ratio you desire since each is controlled by a separate volume knob. The control knobs are stylish black Top Hats with silver reflectors. A Gibson hardshell case is also included to keep the ES-335 safe and secure when you’re on the way to your next gig.
Serial Number: 231040082
Weight: 8 lbs
Specs
Body
- Shape: ES-335
- Top: 3-Ply Figured Maple/Poplar Maple
- Back: 3-Ply Figured Maple/Poplar Maple
- Binding: Single Ply Cream, Top, Back, and Fretboard
Neck
- Neck: Mahogany
- Profile: Rounded "C"
- Nut Width: 1.69" / 43.05mm
- Fingerboard: Rosewood
- Scale Length: 24.75" / 628.65mm
- Number of frets: 22
- Nut: Graph Tech
- Inlay: Acrylic Dot
Hardware
- Bridge: ABR-1 Tune-O-Matic
- Tailpiece: Aluminum Stop Bar
- Tuners: Vintage Deluxe with Keystone Button
- Plating: Nickel
Electronics
- Neck Pickup: Calibrated T-Type, Rhythm
- Bridge Pickup: Calibrated T-Type, Lead
- Controls: 2 Volume, 2 Tone Hand-wired with 500K Potentiometers and Orange Drop Capacitors
Case & Skus
- Case: Hardshell
Gibson ES-335 Figured Electric Guitar - Honey Amber
$ 3,999.00 $ 4,798.00
The Gibson ES-335 Figured is the perfect blend of form and function. Crafted with a maple centerblock and quarter-sawn Adirondack spruce bracing, players will be impressed by the lightweight feel and expanded range of tonal capabilities. Equipped with high-end appointments like our hand-wired control assembly with Orange Drop® capacitors, Gibson's new Calibrated T-Type humbucking pickups, Vintage Deluxe style tuners, and lightweight aluminum ABR-1 bridge and Stop Bar tailpiece anchored with steel thumbwheels and studs. The AAA figured maple is set off by beautiful Custom Color Series gloss finishes.
Serial Number: 231840033
Weight: 8 lbs
Specs
Body
- Shape: ES-335
- Top: 3-Ply AAA Figured Maple/Poplar Maple
- Back: 3-Ply AAA Figured Maple/Poplar Maple
- Bracing: Quarter-Sawn Adirondack Spruce
- Centerblock: Maple
- Binding: Single Ply Cream, Top, Back, and Fretboard
Neck
- Neck: Mahogany
- Profile: Rounded "C"
- Nut Width: 1.69" / 43.05mm
- Fingerboard: Rosewood
- Scale Length: 24.75" / 628.65mm
- Number of frets: 22
- Nut: Graph Tech
- Inlay: Acrylic Small Block
Hardware
- Bridge: ABR-1 Tune-O-Matic
- Tailpiece: Aluminum Stop Bar
- Tuners: Vintage Deluxe with Keystone Button
- Plating: Nickel
Electronics
- Neck Pickup: Calibrated T-Type, Rhythm
- Bridge Pickup: Calibrated T-Type, Lead
- Controls: 2 Volume, 2 Tone (Hand-wired with Orange Drop Capacitors)
Case & Skus
- Case: Hardshell
Gibson ES-339 Electric Guitar - Cherry
$ 2,999.00 $ 3,598.00
The Gibson ES-339 is a modern classic designed for those seeking the tone and look of an ES-335, but desire a slightly smaller, lighter instrument. The pearloid dot inlay rosewood fingerboard on a hand-rolled Rounded "C" mahogany neck remind players where it all started. The 57 / 57 Classic + humbuckers paired with our hand-wired tone circuit showcases the versatile Gibson ES tone that players have craved for over 60 years. Tuning stability and precise intonation are provided by the Grover Rotomatic tuners with Kidney buttons paired with light-weight Aluminum ABR-1 bridge and Stop bar tailpiece. Impressive gloss finishes include Cherry, and Trans Ebony.
- Serial Number: 207630063
- Weight: 7.2lbs
- SKU: ES3900CHNH1
Detailed Specifications
Body
- Body Shape: 339
- Top: 3-ply Maple/Poplar/Maple
- Back: 3-ply Maple/Poplar/Maple
- Bracing: Spruce
- Centerblock: Maple
- Binding: Single-ply Cream
- Finish: Gloss Nitrocellulose Lacquer
Neck
- Material: Mahogany
- Profile: Rounded "C"
- Scale Length: 24.75"
- Fingerboard Material: Rosewood
- Fingerboard Radius: 12"
- Number Of Frets: 22
- Frets: Medium Jumbo
- Nut Material: Graph Tech
- Nut Width: 1.695"
- End of Board Width: 2.26"
- Inlays: Acrylic Dots
Hardware
- Finish: Nickel
- Bridge: ABR-1 Tune-O-Matic
- Tailpiece: Aluminum Stop Bar
- Tuning Machines: Grover Rotomatics w/ Kidney Buttons
- Pickguard: Black 5-ply
- Control Knobs: Black Top Hats with Silver Reflector
- Switch Tip: Cream
Electronics
- Neck Pickup: 57 Classic
- Bridge Pickup: 57 Classic +
- Controls: 2 Volumes, 2 Tones & Toggle Switch
Miscellaneous
- Strings Gauge: .010, .013, .017, .026, .036, .046
- Case: Hard Shell Case
- Accessories: Gibson Accessory Kit
Gibson ES-345 Electric Guitar - Sixties Cherry
Sold Out $ 4,558.00
The Gibson ES-345 boasts a number of aesthetic enhancements over the flagship ES-335. Crafted with a maple centerblock and quarter-sawn Adirondack spruce bracing, players will be impressed by the lightweight feel and expanded range of tonal capabilities. The body is wrapped in multi-ply binding and the bound fingerboard has Split Parallelogram inlays exclusive to this model in the ES™ series. The ES-345 is equipped with a variety of high-end appointments like our hand-wired control assembly with Orange Drop® capacitors, Gibson's new Calibrated T-Type humbucking pickups, Vintage Deluxe style tuners and lightweight aluminum ABR-1 bridge and Stop Bar tailpiece anchored with steel thumb-wheels and studs. The ES-345 can be finished in either a vintage antiqued gloss Sixties Cherry or Vintage Burst.
- Serial Number: 203550340
- Weight: 8.2 lbs
- SKU: ES4500SCNH1
Detailed Specifications
Body
- Body Shape: 345
- Top: 3-ply Maple/Poplar/Maple
- Back: 3-ply Maple/Poplar/Maple
- Bracing: Quarter-Sawn Adirondack Spruce
- Centerblock: Maple
- Binding: 3-ply Cream
- Finish: Gloss Nitrocellulose Lacquer
Neck
- Material: Mahogany
- Profile: Rounded "C"
- Scale Length: 24.75"
- Fingerboard Material: Rosewood
- Fingerboard Radius: 12"
- Number Of Frets: 22
- Frets: Medium Jumbo
- Nut Material: Graph Tech
- Nut Width: 1.695"
- End of Board Width: 2.26"
- Inlays: Acrylic Split Parallelogram
Hardware
- Finish: Nickel
- Bridge: ABR-1 Tune-O-Matic
- Tailpiece: Aluminum Stop Bar
- Tuning Machines: Vintage Deluxe w/ Keystone Buttons
- Pickguard: Black 5-ply
- Control Knobs: Black Top Hats with Silver Reflector
- Switch Tip: Cream
Electronics
- Neck Pickup: Calibrated T-Type, Rhythm
- Bridge Pickup: Calibrated T-Type, Lead
- Controls: 2 Volumes, 2 Tone, hand-wired with Orange Drop capacitors
- Pickup Selector: 3-way Toggle
- Output Jack: 1/4"
Miscellaneous
- Strings Gauge: .010, .013, .017, .026, .036, .046
- Case: Hardshell Case
- Accessories: Gibson Accessory Kit
Gibson ES-345 Electric Guitar - Vintage Burst
$ 3,799.00 $ 4,558.00
The Gibson ES-345 boasts a number of aesthetic enhancements over the flagship ES-335. Crafted with a maple centerblock and quarter-sawn Adirondack spruce bracing, players will be impressed by the lightweight feel and expanded range of tonal capabilities. The body is wrapped in multi-ply binding and the bound fingerboard has Split Parallelogram inlays exclusive to this model in the ES™ series. The ES-345 is equipped with a variety of high-end appointments like our hand-wired control assembly with Orange Drop® capacitors, Gibson's new Calibrated T-Type humbucking pickups, Vintage Deluxe style tuners and lightweight aluminum ABR-1 bridge and Stop Bar tailpiece anchored with steel thumb-wheels and studs. The ES-345 can be finished in either a vintage antiqued gloss Sixties Cherry or Vintage Burst.
- Serial Number: 211440266
- Weight: 7.8 lbs
Detailed Specifications
Body
- Body Shape: 345
- Top: 3-ply Maple/Poplar/Maple
- Back: 3-ply Maple/Poplar/Maple
- Bracing: Quarter-Sawn Adirondack Spruce
- Centerblock: Maple
- Binding: 3-ply Cream
- Finish: Gloss Nitrocellulose Lacquer
Neck
- Material: Mahogany
- Profile: Rounded "C"
- Scale Length: 24.75"
- Fingerboard Material: Rosewood
- Fingerboard Radius: 12"
- Number Of Frets: 22
- Frets: Medium Jumbo
- Nut Material: Graph Tech
- Nut Width: 1.695"
- End of Board Width: 2.26"
- Inlays: Acrylic Split Parallelogram
Hardware
- Finish: Nickel
- Bridge: ABR-1 Tune-O-Matic
- Tailpiece: Aluminum Stop Bar
- Tuning Machines: Vintage Deluxe w/ Keystone Buttons
- Pickguard: Black 5-ply
- Control Knobs: Black Top Hats with Silver Reflector
- Switch Tip: Cream
Electronics
- Neck Pickup: Calibrated T-Type, Rhythm
- Bridge Pickup: Calibrated T-Type, Lead
- Controls: 2 Volumes, 2 Tone, hand-wired with Orange Drop capacitors
- Pickup Selector: 3-way Toggle
- Output Jack: 1/4"
Miscellaneous
- Strings Gauge: .010, .013, .017, .026, .036, .046
- Case: Hardshell Case
- Accessories: Gibson Accessory Kit
Gibson Everly Brothers J-180 Acoustic Guitar - Ebony
$ 4,999.00 $ 5,998.00
Made Famous by One of Rock’s Greatest Duos
Rock and Roll Hall of Fame members Phil and Don Everly, performing together as The Everly Brothers, were among the most popular artists in the world during the early rock era of the 1950s and early 1960s. Their seamless, soaring harmonies were supported by their driving rhythm parts played on matching Gibson acoustic guitars. Gibson is proud to celebrate their rich musical legacy with the return of the Everly Brothers J-180 to the core Custom Shop Artist model lineup. Featuring a maple body and Sitka spruce top, the Everly Brothers J-180 is replete with all of the decorative details that make the Gibson Everly Brothers models instantly recognizable, including an Ebony gloss nitrocellulose lacquer finish, double tortoise moustache pickguards designed in cooperation with the Everly Brothers, and mother of pearl star inlays on the headstock and neck. The Everly Brothers J-180 also features a bone nut and saddle, TUSQ® bridge pins, and Grover® Rotomatic® tuners with Keystone buttons. It comes with an L.R. Baggs™ VTC under-saddle pickup and preamp, making it stage and studio-ready the moment you take it out of the included hardshell case.
Serial Number: 21154023
Weight: 4.8 lbs
Specs
Body
- Body Style: Jumbo
- Body Shape: J-180
- Body Material: Maple
- Top: Sitka Spruce
- Bracing: Traditional Hand-scalloped X-bracing
- Binding: Multi-ply Top, Single-ply Back and Fretboard
- Body Finish: Gloss Nitrocellulose Lacquer
Neck
- Profile: SlimTaper
- Scale Length: 628.65 mm / 24.75 in
- Fingerboard Material: Indian Rosewood
- Fingerboard Radius: 304.8 mm / 12 in
- Neck Material: Mahogany
- Fret Count: 20
- Frets: Standard
- Nut Material: Bone
- Nut Width: 43.815 mm / 1.725 in
- Inlays: Mother of Pearl Graduated Star
- Joint: Compound Dovetail Neck-to-body Joint; Hot Hide Glue
Hardware
- Bridge: Belly Up, Rosewood
- Saddle Material: Bone
- Tuning Machines: Grover Rotomatic with Keystone Button
- Pickguard: Double J-180 Moustache, 60s Style, Tortoise
- Truss Rod: Adjustable
- Truss Rod Cover: 2-ply Black, Engraved "EVERLY"
- Bridge Pins: TUSQ
Electronics
- Under Saddle Pickup: L.R. Baggs VTC
- Controls: Soundhole-mounted Volume and Tone
- Output Jack: 1/4" Endpin
- Preamp: L.R. Baggs VTC
Miscellaneous
- Strings Gauge: .012, .016, .024, .032, .042, .053
- Case: Hardshell
- Accessories: Certificate of Authenticity
Gibson F5 Hall of Fame Bill Monroe Model #11 Mandolin
Sold Out $ 30,238.00
Signed by Bill Monroe
Description
- Serial Number: 7398711
- Weight: 2.4 lbs
Specs
- Hand Carved Red Spruce Top
- Maple Back and Sides
- Tuned Parallel Tone Bar
- Bound Ebony Fingerboard
- Aged Gold Plated Tuners (Grover’s)
- Reproduction Ebony Bridge (Bill Monroe)
- Hide Glue Construction
- Varnish Finish
- Vintage Flowerpot Headstock Inlay
- Pearl Tuner Buttons
- Aged Leatherette Case Embossed “Bill Monroe Father Of Bluegrass Music”
- Signed Monroe Label
- Custom Distressing done by David Harvey Master Luthier
Gibson Falcon 20 1x12 Combo Guitar Amplifier - Cream Bronco
$ 1,799.00 $ 2,518.60
Vintage Tone… Reimagined!
Gibson is proud to introduce the new Falcon 20 1x12 Combo amplifier. It pays homage to Gibson’s legendary past as one of the world’s first manufacturers of electric guitar amplifiers. The Falcon 20 resurrects the Gibson amp icon and delivers vintage tone, reimagined in an upgraded rendering with valuable new features and all the original magic intact, and then some.
While inspired by the Gibson Falcon amps from the 1960s, this all-new design from renowned amp pioneer Randall Smith and the MESA/Boogie Design Team is handcrafted in Petaluma, California, and sets a new bar in low-power tone. The Falcon 20 stands apart from its predecessors due to the constructional upgrades and tonal improvements unearthed over Randall’s five decades of tube amp design experience and performance-pushing ideology that deliver nothing less than astonishing results.
The Falcon 20 features single-channel simplicity with a focus on great tone and ease of use. The ultra-simple, pure signal path design has controls consisting of Volume and Tone, plus the addition of footswitchable Reverb and Tremolo, which add dimensionality and motion and immensely increase the amp’s enjoyment and usefulness over a wide range of musical styles.
Players in the know have long understood that one of the secrets to great overdriven tone is power amp overdrive, and lower-powered amps are key to turning up and achieving that cranked power amp sound without overwhelming volume levels. The Gibson Falcon 20 1x12 Combo is ideal for those demanding touch-sensitive, nuanced response at the low to medium end of the gain and power spectrum, with a harmonically rich blend of vintage power-amp overdrive when turned up. All this tonal magic is brought to life via the vintage voice from a 12” Jensen® Blackbird 40 Alnico speaker, which perfectly complements the volume range and Class A power section. Players can select between Full, Half, or Low (12, 5, or 1-Watt) power modes of patented Multi-Watt™, 6V6, Pure Class A Power, or 15, 6, or 2-Watts with optional 6L6 Power Tubes, providing three levels of expressive, vintage Gibson tone and feel. This power flexibility enables even more ways to transition in and out of clip seamlessly and musically and making the Falcon 20 an ideal amp for club gigs, home practice, and recording purposes. With its modern refinements, high-end performance, and boutique construction, the Falcon 20 soars high above even the most prized vintage Gibson gems.
-
Handcrafted in Petaluma, California
-
All-Tube Amplifier: 2x 6V6 Power Tube (optional 2x 6L6) / 4x 12AX7 Preamp Tubes
-
Pure Class A Power
-
Patented Multi-Watt™ Power, featuring Duo-Class™ wiring, providing power choices of FULL power (approx. 12 Watts) - 2x 6V6 Push-Pull, Class A, Pentode; HALF power (approx. 5 Watts) - 2x 6V6 Push-Pull, Class A, Triode; or LOW power (approx. 1 Watt) - 1x 6V6 Single-Ended, Class A, Pentode (approx. 15 Watts, 6 Watts, and 2 Watts with optional 6L6 Power Tubes)
-
Cathode Biased, Maintenance-Free
-
Single Channel Simplicity – Channel Features: Normal & Low (Cleaner) Inputs, Volume, Tone, Reverb, Tremolo Depth & Frequency Controls
-
Footswitchable, All-Tube Spring Reverb
-
Footswitchable, All-Tube Tremolo
-
Monitor (Slave) DI Output – Fixed Attenuated from the Speaker Output
-
Polished Stainless Steel Control Faceplate
-
Aluminum Chassis
-
2 Button Footswitch Included
-
Slip Cover Included
-
12” Jensen Blackbird 40 Alnico Speaker
QUICK OVERVIEW
Wattage
- Selectable Full, Half or Low Multi-Watt™ Power Modes, producing approximately 12, 5, or 1-Watt(s) of output power (approx. 15, 6, or 2-Watts with optional 6L6 Power Tubes)
Channels & Modes
- 1 Channel / 2 Modes (Normal or Low)
Channels/Inputs
- Normal & Low Inputs - NORMAL = Clean to Overdrive, LOW = Cleaner
Mode Voicings styles
- Single Channel with two Inputs: Normal Input = Clean to Overdrive Low Input = Cleaner
Graphic Eq Reverb Fx Solo
- Reverb, Tremolo
Foot switchable Functions
- Reverb On/Off, Tremolo On/Off (2-Button Vintage Style Footswitch Included)
Speakers Impedance
- 1 - 12" 8 Ohm Jensen Blackbird ALNICO 40 / Total Load = 8 Ohms
Weight
- 31 lbs.
Dimensions
- 17.5” (44.45 cm) H x 20” (50.8 cm) W x 8 7/8” (22.54 cm) D (Height measurement includes rubber feet and the top of the handle in its flat position)
AMP FEATURES
Amp Type
- Tube
Rectifier Type
- Silicon Diodes
Preamp Tubes
- 4x 12AX7
Power Amp Tubes
- 2x 6V6 (or optional 2x 6L6)
Maintenance Free Fixed Bias
- Cathode Biased, which is also Maintenance Free
Wattages Quick Reference
- Full (approximately 12 watts) Half (approx. 5 watts) or Low Power (approx. 1 watt) with Stock 6V6 Power Tubes (Approx. 15 watts / 6 watts / 2 watts with optional 6L6 Power Tubes) - See Power Amp Details for more information
Built In Power Amp Attenuation
- n/a
Power Amp Details Class Wattage
- Patented Incremental Multi-Watt™ (Patent 9,917,560) Power Amp, featuring Duo-Class™ (Patent 7,173,488) power, provides three power and three wiring options via a single 3-Way Power Switch! Choose from the following power options: Full Power (12-Watts) - 2x6V6 (or 15-Watts w/6L6) Push-Pull, Class A, Pentode Half Power (5-Watts) - 2x6V6 (or 6-Watts w/6L6) Push-Pull, Class A, Triode Low Power (1-Watt) - 1x6V6 (or 2-Watts w/6L6) Single-Ended, Class A, Pentode
Channel Controls
- Volume, Tone, Reverb, Tremolo Depth & Frequency Controls
Reverb Effects Bypass Options
- Footswitchable, All-Tube, Spring Reverb & Tremolo
Speaker Outputs
- One 8 Ohm and Two 4 Ohm
Slave Output
- Yes - Fixed-Attenuated "MONITOR" Output from the Speaker Output
ACESSORIES
Footswitch
- Included - 2-Button Vintage Style (Reverb On/Off, Tremolo On/Off)
Slip Cover
- Included - Fitted Slipcover
CABINET FEATURES
Cabinet Material
- Marine Grade, Baltic Birch
Standard Finish Options (No Extra Cost)
- Cream Bronco Vinyl with Oxblood Grille
Speakers Impedance
- 1 - 8 Ohm Jensen Blackbird ALNICO 40 / Total Load = 8 Ohms
Casters
- n/a
Extra Features
- Vintage-Inspired Construction for Tone & Portability
WEIGHTS AND DIMS
Weight
- 31 lbs. (14.06 kg.)
Height
- 17.5" (44.45 cm) (Height measurement includes rubber feet and the top of the handle in its flat position)
Width
- 20" (50.8 cm)
Depth
- 8 7/8” (22.54 cm)
Gibson Firebird Platypus Electric Guitar - Tobacco Sunburst
$ 2,499.00 $ 2,998.00
Paying tribute to the rare transitional models from 1965
In early 1965, the original Firebird™ design transitioned through several different iterations. One of the significant transitions that occurred flipped the headstock to the “Non-Reverse” shape. Unlike the original Reverse Firebird headstock design, which featured a two-layered headstock with a holly veneer, the new headstock was flat, like the bill of a platypus. The Platypus-style Firebird featured six-in-line tuners rather than the banjo-style tuners that were used on previous Firebird models. The Firebird Platypus pays tribute to those rare transitional models. It features a mahogany body with a glued-in, set neck and the appearance of a traditional neck-through Reverse Firebird body. The mahogany neck has a fast-playing SlimTaper™ profile and a rosewood fretboard with a 12” radius, 22 medium jumbo frets, and acrylic trapezoid inlays and sports the Platypus-style headstock with a Graph Tech® nut and Grover® Mini Rotomatic® tuners. The Platypus-style headstock has been slightly modified to provide straight string pull for less friction and improved tuning stability. The other ends of the strings are routed over a Nashville Tune-O-Matic™ bridge for precise intonation and solidly anchored with an aluminum Stop Bar tailpiece for outstanding sustain. The Firebird is one of the most distinctive-looking guitar designs ever, and the Firebird Platypus takes this legendary guitar a step further with its unique appearance. Its tone is just as unique due to its two articulate, historically accurate Firebird mini humbucker™ pickups. They are equipped with Alnico 5 magnets and can deliver tones with a nearly bell-like chime when played clean and great rock and blues tones that easily cut through the mix when pushed. Individual volume and tone controls allow you to tailor the sound even further, and of course, the pickguard features the legendary hot-stamped Firebird graphic. A Gibson hardshell case is also included.
Key Features
- Mahogany Body with the Appearance of a Traditional Neck-Through Firebird Body
- Glued In Mahogany Neck with a SlimTaper Profile
- Rosewood Fretboard with 12" Radius, 22 Medium Jumbo Frets, and Acrylic Trapezoid Inlays
- Platypus-style Headstock with Six Grover Mini Rotomatic Tuners
- Two Firebird Mini Humbucker Pickups
- A Gibson Hardshell Case is Included
- Serial Number: 200950104
- Weight: 8.2 lbs
Specs
Body
- Body Style: Firebird
- Body Shape: Reverse Firebird
- Body Material: Mahogany
- Binding: Single Ply, Fretboard
- Body Finish: Gloss Nitrocellulose Lacquer
Neck
- Profile: SlimTaper
- Scale Length: 628.65 mm / 24.75 in
- Fingerboard Material: Rosewood
- Fingerboard Radius: 304.8 mm / 12 in
- Neck Material: Mahogany
- Fret Count: 22
- Frets: Medium Jumbo
- Nut Material: Graph Tech
- Nut Width: 43.053 mm / 1.695 in
- End Of Board Width: 57.404 mm / 2.26 in
- Inlays: Acrylic Trapezoid
- Joint: Glued In, Set Neck
Hardware
- Finish: Chrome
- Bridge: Aluminum Nashville Tune-O-Matic
- Tailpiece: Aluminum Stop Bar
- Tuning Machines: Grover Mini Rotomatic
- Pickguard: White 3-ply
- Truss Rod: Adjustable
- Control Knobs: Gold Top Hat with Silver Reflector
- Switch Tip: White
- Strap Buttons: 2
Electronics
- Neck Pickup: Firebird Mini Humbucker
- Bridge Pickup: Firebird Mini Humbucker
- Controls: 2 Volume, 2 Tone
- Pickup Selector: 3-way Toggle
- Output Jack: 1/4"
Miscellaneous
- Strings Gauge: .010, .013, .017, .026, .036, .046
- Case: Hardshell
- Accessories: Includes Gibson Accessory Kit
Gibson Gene Simmons G2 Thunderbird Bass - Ebony Mirror
$ 2,799.00 $ 3,358.00
Gene Simmons is a legendary rock icon and the bassist from KISS, and his new Gibson Gene Simmons G2 Thunderbird Bass reflects his tastes. Designed to meet the musical needs of modern bassists, it features the classic Reverse Thunderbird™ body and headstock shape. The G2 Thunderbird Bass is voiced with a pair of powerful T-Bird pickups, each with individual Volume controls and paired with a master Tone control. The bound ebony fretboard features pearloid reverse split diamond inlays. A Graph Tech® nut and Hipshot® Mini Clover tuners keep the tuning rock-solid, while the other end of the strings anchor to a Hipshot® Bass Bridge. The back of the headstock features a G2 logo. The Ebony nitrocellulose lacquer finish is paired with Black Chrome hardware and a Mirror Plex truss rod cover and Mirror Plex pickguard with a laser engraved custom Gene Simmons logo. A modern hardshell case is included.
- Serial Number: 235420327
- Weight: 9.6lbs
- SKU: BAT4GSM00EBBC1
Detailed Specifications
Body
- Body Shape: Thunderbird
- Body Material: Mahogany
- Binding: Multi-ply Top, Single Ply Fretboard
- Finish: Gloss Nitrocellulose Lacquer
Neck
- Material: Mahogany
- Profile: Rounded
- Scale Length: 34"
- Fingerboard Material: Ebony
- Fingerboard Radius: 12"
- Number Of Frets: 20
- Frets: Medium Jumbo
- Nut Material: Graph Tech
- Nut Width: 1.6"
- End of Board Width: 2.315"
- Inlays: Pearloid Reverse Split Diamond
- Joint: Glued In
Hardware
- Finish: Black Chrome
- Tuner Plating: Black Chrome
- Bridge: Hipshot Bass Bridge
- Tuning Machines: Hipshot Mini Clover
- Pickguard: Mirror Plex with Custom Gene Simmons Logo
- TrussRod: Adjustable
- Truss Rod Cover: Mirror Plex
- Control Knobs: Black Top Hat with Silver Inserts
- Strap Buttons: 2
Electronics
- Neck Pickup: Rhythm T-Bird
- Bridge Pickup: Lead T-Bird
- Controls: 2 Volume, Master Tone
- Output Jack: 1/4"
Miscellaneous
- Strings Gauge: .045, .065, .085, .105
- Case: Modern Hardshell Case
- Accessories: Gibson Accessory Kit
Gibson Gene Simmons G2 Thunderbird Bass - Ebony Mirror
$ 2,799.00 $ 3,358.00
Gene Simmons is a legendary rock icon and the bassist from KISS, and his new Gibson Gene Simmons G2 Thunderbird Bass reflects his tastes. Designed to meet the musical needs of modern bassists, it features the classic Reverse Thunderbird™ body and headstock shape. The G2 Thunderbird Bass is voiced with a pair of powerful T-Bird pickups, each with individual Volume controls and paired with a master Tone control. The bound ebony fretboard features pearloid reverse split diamond inlays. A Graph Tech® nut and Hipshot® Mini Clover tuners keep the tuning rock-solid, while the other end of the strings anchor to a Hipshot® Bass Bridge. The back of the headstock features a G2 logo. The Ebony nitrocellulose lacquer finish is paired with Black Chrome hardware and a Mirror Plex truss rod cover and Mirror Plex pickguard with a laser engraved custom Gene Simmons logo. A modern hardshell case is included.
- Serial Number: 210230071
- Weight: 8.6lbs
- SKU: BAT4GSM00EBBC1
Detailed Specifications
Body
- Body Shape: Thunderbird
- Body Material: Mahogany
- Binding: Multi-ply Top, Single Ply Fretboard
- Finish: Gloss Nitrocellulose Lacquer
Neck
- Material: Mahogany
- Profile: Rounded
- Scale Length: 34"
- Fingerboard Material: Ebony
- Fingerboard Radius: 12"
- Number Of Frets: 20
- Frets: Medium Jumbo
- Nut Material: Graph Tech
- Nut Width: 1.6"
- End of Board Width: 2.315"
- Inlays: Pearloid Reverse Split Diamond
- Joint: Glued In
Hardware
- Finish: Black Chrome
- Tuner Plating: Black Chrome
- Bridge: Hipshot Bass Bridge
- Tuning Machines: Hipshot Mini Clover
- Pickguard: Mirror Plex with Custom Gene Simmons Logo
- TrussRod: Adjustable
- Truss Rod Cover: Mirror Plex
- Control Knobs: Black Top Hat with Silver Inserts
- Strap Buttons: 2
Electronics
- Neck Pickup: Rhythm T-Bird
- Bridge Pickup: Lead T-Bird
- Controls: 2 Volume, Master Tone
- Output Jack: 1/4"
Miscellaneous
- Strings Gauge: .045, .065, .085, .105
- Case: Modern Hardshell Case
- Accessories: Gibson Accessory Kit
Gibson Greenybucker Set Electric Guitar Pickups
$ 299.00 $ 358.00
The Gibson Patent Applied For humbucker™ pickups from the 1950s are considered by many musicians to be the “holy grail” of vintage electric guitar pickups. Among them, the unique set that was installed in the legendary “Greeny” Les Paul™ are some of the most famous. The new Greenybucker set is instantly recognizable from a sonic perspective; their distinctive sound is partially from the out-of-phase middle switch position due to the neck pickup’s reverse magnetic polarity. The Greenybucker pickup set was developed with input from Greeny’s current owner, Kirk Hammett, and with specifications taken from the actual Patent Applied For humbucker pickups on that world-renowned guitar, including asymmetrical coil windings and unpolished Alnico 2 magnets.
-
Position: Rhythm/Treble (Set of Two)
-
Magnets: Alnico 2
-
Wiring: 2-Conductor
-
Covers: Nickel
-
Unpotted
-
Double Black Bobbins
-
Average DC Resistance: Rhythm: 8.3k, Treble: 8.7k
-
Details: As featured on the Gibson USA Kirk Hammett “Greeny” Les Paul. Developed with Kirk Hammett’s guidance and with specs taken from the actual Patent Applied For pickups on the Greeny Les Paul. The rhythm pickup features reverse magnetic polarity for the signature Greeny sound.
Gibson Historic Replica Les Paul Case Hand Aged - Brown
$ 599.00 $ 718.80
This hand-aged Historic Replica Les Paul case has a vintage asthetic, while offering all the protection of a quality form-fitting hardshell.
Features
- Mottled-brown exterior, carefully aged for a classic look
- Plush pink lining with handy lidded center pocket for accessories
- Riveted Gibson Star logo plate
- Fits most Gibson Custom Shop Historic Les Paul guitars
Gibson Hummingbird Original Acoustic Guitar - Heritage Cherry Sunburst
Sold Out $ 4,798.00
One of Gibson's Most Distinctive Acoustic Instruments
The unmistakable Gibson Hummingbird is followed by the masses as one of the most remarkable acoustic guitars ever built. The new Hummingbird Original blends vintage appointments and today's modern, high-quality build construction. Outfitted with gold Gotoh Keystone tuners, double antiqued binding, a traditional Hummingbird truss rod cover, and a bone nut and saddle, it's available in Antique Natural or Heritage Cherry Sunburst finish.
- Serial Number: 21904041
- Weight: 4.4 lbs
Detailed Specifications
Body
- Body Shape: Hummingbird
- Top: Sitka spruce
- Back: Mahogany
- Side: Mahogany
- Bracing: Traditional hand scalloped X-bracing
- Binding: Multi-ply top, multi-ply back
- Finish: Nitrocellulose
Neck
- Material: Mahogany
- Profile: Round
- Scale Length: 24.75"
- Fingerboard Material: Rosewood
- Fingerboard Radius: 12"
- Number Of Frets: 20
- Frets: Standard
- Nut Material: Bone
- Nut Width: 1.725"
- Inlays: Mother-of-pearl Parallelograms
- Joint: Compound Dovetail Neck-to-body
Hardware
- Tuner Plating: Gold
- Bridge: Traditional belly up
- Saddle Material: Bone
- Tuning Machines: Gotoh Keystone
- Pickguard: .060'' Hummingbird
- Truss Rod Cover: Hummingbird
- Bridge Pins: Tusq
Electronics
- Under Saddle Pickup: LR Baggs VTC
- Controls: Volume and Tone controls
Miscellaneous
- Strings Gauge: 0.053, 0.042, 0.032, 0.024, 0.016, 0.012
- Case: Hardshell Case
- Accessories: Includes Gibson Accessory Kit
Gibson Hummingbird Special Acoustic Guitar - Satin Vintage Cherry Sunburst
Sold Out $ 2,640.00
First introduced in 1960, the Gibson Hummingbird™ is one of the most distinctive and well-loved acoustic guitars ever made. Handcrafted with care in Bozeman, Montana, by Gibson's expert acoustic luthiers, the new Gibson Hummingbird Special offers players a USA-built Gibson Hummingbird model at a very attractive price. The Hummingbird Special has a traditional square-shouldered body constructed using genuine solid mahogany for the back and sides and a solid Sitka spruce top that is reinforced with our traditional scalloped X-bracing. This combination of tonewoods delivers a warm, balanced tone with excellent dynamic range that is perfect for any style of music. The "concert depth" body is slightly thinner than the body on a Hummingbird Standard, giving it a leaner and tighter bass response that sits perfectly in the mix and also makes it easier to hold. The utile neck is attached to the body with a compound dovetail neck-to-body joint, and like all Gibson acoustic guitars, it is affixed with hot hide glue. The neck has a comfortable Round profile, and the rosewood fretboard has a 12" radius and features pearloid parallelogram inlays, which is one of the visual hallmarks that makes the Hummingbird easily recognizable. The fretboard is fitted with 20 standard frets. The traditional belly-up rosewood bridge is equipped with a TUSQ® saddle, and the nut and bridge pins are also TUSQ. High-quality Grover® Rotomatic® tuners ensure rock-solid tuning stability. The pickguard features a simplified version of the world-famous Hummingbird pickguard graphics. The Hummingbird Special is finished in satin nitrocellulose lacquer in our choice of Satin Vintage Cherry Sunburst and Satin Wine Red. It comes equipped with an L.R. Baggs ™M Element Bronze under-saddle piezo pickup and active preamp with an easilv accessible soundhole-mounted volume control, so it's stage and studio-ready from the moment vou take it out of the included premium soft shell case.
- Serial Number: 20415087
- Weight: 4.4 lbs
Specs
Body
- Shape: Hummingbird
- Material: Solid Mahogany
- Top: Solid Sitka Spruce
- Back: Solid Mahogany
- Binding: Single Ply Cream, Top and Back
Neck
- Neck: Utile
- Profile: SlimTaper
- Nut Width: 1.725" / 43.815mm
- Fingerboard: Rosewood
- Scale Length: 24.75" / 628.65mm
- Number of frets: 20
- Nut: TUSQ
- Inlay: Pearloid Paaralellogram
Hardware
- Bridge: Traditional Belly Up; Rosewood
- Tuners: Grover Rotomatic
- Plating: Nickel
Electronics
- Under Saddle Pickup: L.R. Baggs Element Bronze
- Controls: Soundhole Mounted Volume
Case & SKUs
- Case: Premium Soft Shell
Gibson Hummingbird Special Acoustic Guitar - Satin Wine Red
Sold Out $ 2,640.00
First introduced in 1960, the Gibson Hummingbird™ is one of the most distinctive and well-loved acoustic guitars ever made. Handcrafted with care in Bozeman, Montana, by Gibson's expert acoustic luthiers, the new Gibson Hummingbird Special offers players a USA-built Gibson Hummingbird model at a very attractive price. The Hummingbird Special has a traditional square-shouldered body constructed using genuine solid mahogany for the back and sides and a solid Sitka spruce top that is reinforced with our traditional scalloped X-bracing. This combination of tonewoods delivers a warm, balanced tone with excellent dynamic range that is perfect for any style of music. The "concert depth" body is slightly thinner than the body on a Hummingbird Standard, giving it a leaner and tighter bass response that sits perfectly in the mix and also makes it easier to hold. The utile neck is attached to the body with a compound dovetail neck-to-body joint, and like all Gibson acoustic guitars, it is affixed with hot hide glue. The neck has a comfortable Round profile, and the rosewood fretboard has a 12" radius and features pearloid parallelogram inlays, which is one of the visual hallmarks that makes the Hummingbird easily recognizable. The fretboard is fitted with 20 standard frets. The traditional belly-up rosewood bridge is equipped with a TUSQ® saddle, and the nut and bridge pins are also TUSQ. High-quality Grover® Rotomatic® tuners ensure rock-solid tuning stability. The pickguard features a simplified version of the world-famous Hummingbird pickguard graphics. The Hummingbird Special is finished in satin nitrocellulose lacquer in our choice of Satin Vintage Cherry Sunburst and Satin Wine Red. It comes equipped with an L.R. Baggs ™M Element Bronze under-saddle piezo pickup and active preamp with an easilv accessible soundhole-mounted volume control, so it's stage and studio-ready from the moment vou take it out of the included premium soft shell case.
- Serial Number: 20435089
- Weight: 4.4 lbs
Specs
Body
- Shape: Hummingbird
- Material: Solid Mahogany
- Top: Solid Sitka Spruce
- Back: Solid Mahogany
- Binding: Single Ply Cream, Top and Back
Neck
- Neck: Utile
- Profile: SlimTaper
- Nut Width: 1.725" / 43.815mm
- Fingerboard: Rosewood
- Scale Length: 24.75" / 628.65mm
- Number of frets: 20
- Nut: TUSQ
- Inlay: Pearloid Paaralellogram
Hardware
- Bridge: Traditional Belly Up; Rosewood
- Tuners: Grover Rotomatic
- Plating: Nickel
Electronics
- Under Saddle Pickup: L.R. Baggs Element Bronze
- Controls: Soundhole Mounted Volume
Case & SKUs
- Case: Premium Soft Shell
Gibson Hummingbird Special Left-Handed Acoustic Guitar - Satin Vintage Cherry Sunburst
Sold Out $ 2,640.00
First introduced in 1960, the Gibson Hummingbird™ is one of the most distinctive and well-loved acoustic guitars ever made. Handcrafted with care in Bozeman, Montana, by Gibson's expert acoustic luthiers, the new Gibson Hummingbird Special offers players a USA-built Gibson Hummingbird model at a very attractive price. The Hummingbird Special has a traditional square-shouldered body constructed using genuine solid mahogany for the back and sides and a solid Sitka spruce top that is reinforced with our traditional scalloped X-bracing. This combination of tonewoods delivers a warm, balanced tone with excellent dynamic range that is perfect for any style of music. The "concert depth" body is slightly thinner than the body on a Hummingbird Standard, giving it a leaner and tighter bass response that sits perfectly in the mix and also makes it easier to hold. The utile neck is attached to the body with a compound dovetail neck-to-body joint, and like all Gibson acoustic guitars, it is affixed with hot hide glue. The neck has a comfortable Round profile, and the rosewood fretboard has a 12" radius and features pearloid parallelogram inlays, which is one of the visual hallmarks that makes the Hummingbird easily recognizable. The fretboard is fitted with 20 standard frets. The traditional belly-up rosewood bridge is equipped with a TUSQ® saddle, and the nut and bridge pins are also TUSQ. High-quality Grover® Rotomatic® tuners ensure rock-solid tuning stability. The pickguard features a simplified version of the world-famous Hummingbird pickguard graphics. The Hummingbird Special is finished in satin nitrocellulose lacquer in our choice of Satin Vintage Cherry Sunburst and Satin Wine Red. It comes equipped with an L.R. Baggs ™M Element Bronze under-saddle piezo pickup and active preamp with an easilv accessible soundhole-mounted volume control, so it's stage and studio-ready from the moment vou take it out of the included premium soft shell case.
- Serial Number: 20705029
- Weight: 4.6 lbs
Specs
Body
- Shape: Hummingbird
- Material: Solid Mahogany
- Top: Solid Sitka Spruce
- Back: Solid Mahogany
- Binding: Single Ply Cream, Top and Back
Neck
- Neck: Utile
- Profile: SlimTaper
- Nut Width: 1.725" / 43.815mm
- Fingerboard: Rosewood
- Scale Length: 24.75" / 628.65mm
- Number of frets: 20
- Nut: TUSQ
- Inlay: Pearloid Paaralellogram
Hardware
- Bridge: Traditional Belly Up; Rosewood
- Tuners: Grover Rotomatic
- Plating: Nickel
Electronics
- Under Saddle Pickup: L.R. Baggs Element Bronze
- Controls: Soundhole Mounted Volume
Case & SKUs
- Case: Premium Soft Shell
Gibson Hummingbird Standard Acoustic Guitar - Vintage Cherry Sunburst
$ 3,999.00 $ 4,798.00
The Distinctive Hummingbird
Much of the Hummingbird’s appeal lies in its versatility. No matter how you attack this flat-top, it pumps out rich, deep tones, and is equally at home strumming first-position chords as it is taking the spotlight for picking lead lines. Its spacious mahogany body and sweet, select Sitka spruce top are more than capable of nailing down the rhythm in the hands of a rock and roll sideman or accompanying the most nuanced performance under the fingers of today’s alternative singer-songwriter. The Hummingbird's mahogany neck has a comfortable rounded profile and mother of pearl parallelogram inlays. This 'bird has a TUSQ® nut, saddle, and bridge pins, Grover® Rotomatic® tuners, the iconic Hummingbird™ graphics on the pickguard, and is equipped with LR Baggs® VTC electronics, so it's ready to plug in on stage or in the studio. A Gibson hardshell case is included.
- Serial Number: 22634091
- Weight: 4.6 lbs
Detailed Specifications
Body
- Body Style: Square Shoulder
- Body Shape: Hummingbird
- Body Material: Mahogany
- Top: Sitka Spruce
- Back: Mahogany
- Side: Mahogany
- Binding: 5-ply Top, 3-ply Back, Single ply Fingerboard
- Body Finish: Gloss Nitrocellulose Lacquer
Neck
- Profile: Rounded
- Scale Length: 628.65 mm / 24.75 in
- Fingerboard Material: Indian Rosewood
- Fingerboard Radius: 304.8 mm / 12 in
- Neck Material: Mahogany
- Fret Count: 20
- Frets: Standard
- Nut Material: TUSQ
- Nut Width: 43.815 mm / 1.725 in
- Inlays: Mother of Pearl Parallelograms
- Joint: Compound Dovetail Neck-to-body Joint; Hot Hide Glue
Hardware
- Finish: Nickel
- Bridge: Reverse Belly, Rosewood
- Saddle Material: TUSQ
- Tuning Machines: Grover Rotomatic
- Pickguard: .060'' Hummingbird
- Truss Rod: Adjustable
- Truss Rod Cover: 2-ply Bell, Black and White
- Bridge Pins: TUSQ
- Strap Buttons: 2
Electronics
- Under Saddle Pickup: LR Baggs VTC
- Controls: Soundhole Mounted Volume and Tone
- Output Jack: 1/4" Endpin Jack
- Preamp: LR Baggs VTC
Miscellaneous
- Strings Gauge: .012, .016, .024, .032, .042, .053
- Case: Gibson Hardshell
Gibson Hummingbird Standard Acoustic Guitar - Wine Red
$ 3,999.00 $ 4,798.00
Much of the Hummingbird’s appeal lies in its versatility. No matter how you attack this flat-top, it pumps out rich, deep tones, and is equally at home strumming first-position chords as it is taking the spotlight for picking lead lines. Its spacious mahogany body and sweet, select Sitka spruce top are more than capable of nailing down the rhythm in the hands of a rock and roll sideman or accompanying the most nuanced performance under the fingers of today’s alternative singer-songwriter. The Hummingbird's mahogany neck has a comfortable rounded profile and mother of pearl parallelogram inlays. This 'bird has a TUSQ® nut, saddle, and bridge pins, Grover® Rotomatic® tuners, the iconic Hummingbird graphics on the pickguard, and is equipped with LR Baggs® VTC electronics, so it's ready to plug in on stage or in the studio. A Gibson hardshell case is included.
- Serial Number: 23274085
- Weight: 4.4 lbs
Detailed Specifications
Body
- Body Shape: Hummingbird
- Body Material: Mahogany
- Top: Sitka Spruce
- Back: Mahogany
- Side: Mahogany
- Binding: 5-ply Top, 3-ply Back, Single ply Fingerboard
- Finish: Gloss Nitrocellulose Lacquer
Neck
- Material: Mahogany
- Profile: Round
- Scale Length: 24.75"
- Fingerboard Material: Indian Rosewood
- Fingerboard Radius: 12"
- Number Of Frets: 20
- Frets: Standard
- Nut Material: TUSQ
- Nut Width: 1.725"
- Inlays: Mother of Pearl Parallelograms
- Joint: Compound Dovetail Neck-to-body Joint; Hot Hide Glue
Hardware
- Finish: Nickel
- Tuner Plating: Nickel
- Bridge: Reverse Belly, Rosewood
- Saddle Material: TUSQ
- Tuning Machines: Grover Rotomatic
- Pickguard: .060'' Hummingbird
- TrussRod: Adjustable
- Truss Rod Cover: 2-ply Bell, Black and White
- Bridge Pins: TUSQ
- Strap Buttons: 2
Electronics
- Under Saddle Pickup: LR Baggs VTC
- Controls: Soundhole Mounted Volume and Tone
- Output Jack: 1/4" Endpin Jack
- Preamp: LR Baggs VTC
Miscellaneous
- Strings Gauge: .012, .016, .024, .032, .042, .053
- Case: Gibson Hardshell
Gibson J-45 Special Acoustic Guitar - Satin Vintage Sunburst
$ 1,999.00 $ 2,398.00
First introduced in 1942, the Gibson J-45 ™ has remained a mainstay Gibson acoustic model. It has earned its name as "The Workhorse" due to its wide acceptance, no-nonsense simplicity, and understated elegance. It's one of the most recorded acoustic guitars in history and Gibson's best-selling acoustic model of all time. Handcrafted with care in Bozeman, Montana, by Gibson's expert acoustic luthiers, the new Gibson J-45 Special offers players a USA-built Gibson acoustic guitar at a very attractive price. The J-45 Special has a round shoulder body constructed using genuine solid mahogany for the back and sides and a solid Sitka spruce top. The top is reinforced with our traditional scalloped X-bracing. This combination of tonewoods delivers a warm, balanced tone with excellent dynamic range that is great for any musical genre. The "concert depth" body is slightly thinner than on a J-45 Standard, giving the J-45 Special a leaner and tighter bass response that sits perfectly in the mix and also makes it easier to hold. The utile neck is attached to the body with a compound dovetail neck-to-body joint, and like all Gibson acoustic guitars, it is affixed with hot hide glue. The neck has a comfortable and fast-playing Slim Taper ™M profile, and the rosewood fretboard has a 12" radius and is adorned with simple mother-of-pearl dot inlays and is fitted with 20 standard frets. The traditional belly-up rosewood bridge is equipped with a TUSQ® saddle, and the nut and bridge pins are also TUSQ. High-quality Grover® Rotomatic® tuners ensure solid tuning stability. The J-45 Special is finished in satin nitrocellulose lacquer in vour choice of Satin Vintage Sunburst or Satin Wine Red. It comes with an L.R. Baggs Element Bronze under-saddle piezo pickup with active electronics and an easily accessible soundhole-mounted volume control pre-installed for studio-quality plug-and-play anywhere. The -45 Special also comes with a premium soft shell case.
- Serial Number: 20385071
- Weight: 4.2 lbs
Specs
Body
- Shape: J-45
- Material: Solid Mahogany
- Top: Solid Sitka Spruce
- Back: Solid Mahogany
- Binding: Single Ply Cream, Top and Back
Neck
- Neck: Utile
- Profile: SlimTaper
- Nut Width: 1.725" / 43.815mm
- Fingerboard: Rosewood
- Scale Length: 24.75" / 628.65mm
- Number of frets: 20
- Nut: TUSQ
- Inlay: Mother-of-Pearl Dot
Hardware
- Bridge: Traditional Belly Up; Rosewood
- Tuners: Grover Rotomatic
- Plating: Nickel
Electronics
- Under Saddle Pickup: L.R. Baggs Element Bronze
- Controls: Soundhole Mounted Volume
Case & SKUs
- Case: Premium Soft Shell
Gibson J-45 Special Acoustic Guitar - Satin Wine Red
$ 1,999.00 $ 2,398.00
First introduced in 1942, the Gibson J-45 ™ has remained a mainstay Gibson acoustic model. It has earned its name as "The Workhorse" due to its wide acceptance, no-nonsense simplicity, and understated elegance. It's one of the most recorded acoustic guitars in history and Gibson's best-selling acoustic model of all time. Handcrafted with care in Bozeman, Montana, by Gibson's expert acoustic luthiers, the new Gibson J-45 Special offers players a USA-built Gibson acoustic guitar at a very attractive price. The J-45 Special has a round shoulder body constructed using genuine solid mahogany for the back and sides and a solid Sitka spruce top. The top is reinforced with our traditional scalloped X-bracing. This combination of tonewoods delivers a warm, balanced tone with excellent dynamic range that is great for any musical genre. The "concert depth" body is slightly thinner than on a J-45 Standard, giving the J-45 Special a leaner and tighter bass response that sits perfectly in the mix and also makes it easier to hold. The utile neck is attached to the body with a compound dovetail neck-to-body joint, and like all Gibson acoustic guitars, it is affixed with hot hide glue. The neck has a comfortable and fast-playing Slim Taper ™M profile, and the rosewood fretboard has a 12" radius and is adorned with simple mother-of-pearl dot inlays and is fitted with 20 standard frets. The traditional belly-up rosewood bridge is equipped with a TUSQ® saddle, and the nut and bridge pins are also TUSQ. High-quality Grover® Rotomatic® tuners ensure solid tuning stability. The J-45 Special is finished in satin nitrocellulose lacquer in vour choice of Satin Vintage Sunburst or Satin Wine Red. It comes with an L.R. Baggs Element Bronze under-saddle piezo pickup with active electronics and an easily accessible soundhole-mounted volume control pre-installed for studio-quality plug-and-play anywhere. The -45 Special also comes with a premium soft shell case.
- Serial Number: 20305073
- Weight: 4.2 lbs
Specs
Body
- Shape: J-45
- Material: Solid Mahogany
- Top: Solid Sitka Spruce
- Back: Solid Mahogany
- Binding: Single Ply Cream, Top and Back
Neck
- Neck: Utile
- Profile: SlimTaper
- Nut Width: 1.725" / 43.815mm
- Fingerboard: Rosewood
- Scale Length: 24.75" / 628.65mm
- Number of frets: 20
- Nut: TUSQ
- Inlay: Mother-of-Pearl Dot
Hardware
- Bridge: Traditional Belly Up; Rosewood
- Tuners: Grover Rotomatic
- Plating: Nickel
Electronics
- Under Saddle Pickup: L.R. Baggs Element Bronze
- Controls: Soundhole Mounted Volume
Case & SKUs
- Case: Premium Soft Shell
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2025 Huber Breese Music. Powered by Shopify
