Sold Out $ 10,592.00
Raw
NECK BLANK 1pc MAHOGANY, 17 DEGREE
Head Veneer
HEAD VENEER, LES PAUL CUSTOM, BOURBON BERRY, SPLIT DIAMOND INLAY
Scale
24 3/4"
Truss Rod
TRUSS ROD ASSEMBLY - MODERN TEFLON WRAPPED
Spline
SPLINE, MAPLE
Neck Profile
LPC MODERN MEDIUM C-SHAPE (0.820" / 0.965")
Raw Material
FGBD BLANK 1pc EBONY
Inlays
MOTHER OF PEARL BLOCKS, TAPERED
Fretwire
ESCAR FW45100 (MEDIUM JUMBO, R&S ISSUE)
Binding
BINDING, FINGERBOARD, WHITE 0.063" (80-2301-00)
Side Dots
SIDE DOT, BLACK
Nut
CORIAN
Top Raw
TOP, 2pc MAPLE, PLAIN
Back Raw
BACK 1pc MAHOGANY, HEAVY (+9.5 LBS)
Weight Relief
3-HOLE WEIGHT RELIEF
Top Binding
HWTAB 5-PLY B/W
Back Binding
HWTAB 5-PLY B/W
Pickup Route
63 (LPC Modern, 2 Humbucker, Tune-o-matic, Stopbar, RH)
Finish Type/Gloss
GLOSS
Finish - Top
Midnight Abyss - See Current E.
Finish - Back/Neck/Side/Head
TV Black
See Current E.
Coats of Finish
ZERO ANTIQUE
Peg Head Face Overlay
BLACK (standard)
Decal
100856 DECAL GOLD CUSTOM SHOP - BACK OF PEGHEAD
INK STAMPED WHITE - MODERN (CS)
Hardware Finish
GLOSS
Hardware Material
NICKEL
Machine Heads
GROVER KIDNEY, BASS, NICKEL
Machine Head Plating
GROVER KIDNEY, TREBLE, NICKEL
Bridge
BRIDGE ASSY, TUNE-O-MATIC, NICKEL
Bridge Posts
INCL TUNE-O-MATIC POST, NICKEL
Bridge Thumbwheels
INCL TUNE-O-MATIC THUMBWHEEL, NICKEL
Tailpiece
STOP BAR, NICKEL
Tailpiece Studs
TLPC STUD, STOP BAR, STEEL, SHORT, NICKEL
Tailpiece Anchors
TAILPIECE ANCHOR, VINTAGE LONG
Strap Buttons
STRAP PIN, ALUMINUM
End Pin Screw
SCREW, #8 X 1/2 PH OVAL, LWS NP
Shoulder Pin Screw
SCREW, #8 X 1-1/4 OVAL, WSH NP
Pickguard
109589 PICKGUARD, LPC CUSTOM, 5 PLY, B/W, RH
Pickguard Bracket
101091 FGBD BRACKET, LP, NICKEL
Truss Rod Cover
101329 TRC "Custom"
Toggle Washer
SWITCHWASHER, BLACK W/WHITE LETTERING
Jack Plate
JACKPLATE, NICKEL, SQUARE
Control Knobs
BLACK PLASTIC, LPC MODERN, BLACK
Switch Washer
MEDALLION 2025 - HAND CONVERTED IN NASHVILLE
Toggle Assembly
C/P ASSY, LES PAUL CUSTOM
Toggle Tips
INCL TOGGLE CAP, CREAM
Neck PU
PU Eruption 4-Conductor
Neck P.U. Mount Ring
MOUNTING RING, LOW BLACK
Neck P.U. Unit Cover
None
Middle PU
n/a
Middle P.U. Mount Ring
n/a
Middle P.U. Unit Cover
n/a
Bridge PU
PU Eruption 4-Conductor
Bridge P.U. Mount Ring
MOUNTING RING, HIGH BLACK
Bridge P.U. Unit Cover
None
Volume Knobs
KNOB, SPEED, BLACK
Dial Pointers
None
Sold Out $ 8,199.00
Neck
Fingerboard
Body
Binding
Hardware & Parts
Electronics
Other
**Guitar is new but considered B-Stock due to small finish chip in headstock. Price has discounted accordingly.

$ 7,799.00 $ 9,394.00
NECK
Raw
Head Veneer
Scale
Truss Rod
Spline
Neck Profile
FINGERBOARD
Raw Material
Inlays
Fretwire
Binding
Side Dots
Nut
BODY
Body Raw
Binding
Pickup Route
FINISH
Finish Type/Sheen
Finish Body
Finish Neck
Filler
Coats of Antique
Peg Head Face Color
Peg Head Silkscreen
Decals
SN
HARDWARE & PARTS
Hardware Finish
Hardware Plating
Machine Heads
Bridge
Bridge Post
Bridge Thumbwheel
Tailpiece Studs
Tailpiece Anchors
Tailpiece
Strap Pins
Heel Pin Screw
Rim Pin Screw
Butt Pin Screw
Pickguard
Truss Rod Cover
Toggle Washer
Jack Plate
Control Plate
ELECTRONICS
CFA
Toggle Assembly
Toggle Tip
Neck P.U.
Neck P.U. Mount Ring
Neck P.U. Unit Cover
Middle P.U.
Middle P.U. Mount Ring
Middle P.U. Unit Cover
Volume Knobs
Tone Knobs
Dial Pointers
$ 14,999.00
**This guitar is used and in excellent condition. Little to no signs of wear. Comes with the COA and original hardshell case. The price has been adjusted accordingly.
Keith Nelson of SoCal rock band Buckcherry selected this 'burst from six original '59 Les Pauls after rigorous playing, and has played it on Buckcherry's 2013 release Confessions and every live date since. Thanks to Keith's gracious cooperation, Gibson Custom has painstakingly analyzed every detail of the guitar's look, sound, and modest playing wear to bring you a perfect recreation. From the faded Dirty Lemon Burst finish to the incomparable '59 neck profile and hallowed PAF-driven burst tone, Collector's Choice™ #17 is the nearest you’ll come to making the most valuable electric guitar ever produced your very own.
Serial Number: CC17A071
Weight: 9 lbs
Year: 2014
Series: Collector's Choice
Model: Gibson 1959 Les Paul Collector's Choice #17 Louis
Body: Mahogany
Top: Carved Maple
Finish: Aged Nitro
Color: Dirty Lemon
Neck: Mahogany
Neck profile: 59 rounded
Radius: 12" (305mm)
Scale: 24.75" (629mm)
Width at nut: 1.687" (42mm)
Fretboard: Rosewood
Inlays: Trapezoid Celluloid
Frets: 22
Bridge/Tailpiece: ABR-1 Bridge, Stopbar Tailpiece
Machine Heads: Vintage-style Tulip Tuners
Pickups: BurstBucker 3 (Neck), 57 Classic (Bridge)
Controls: 2 x Volume, 2 x Tone, 3-way switch
Electronics: 50's “Bumble-bee” caps
$ 75,000.00
Explore the Magic of Korina and Brazilian Rosewood
Gibson Custom Shop is the pinnacle of craftsmanship, quality, and sound excellence. Each instrument celebrates Gibson's legacy through accuracy, authenticity, and attention to detail.
This is it - one of the rarest and most desirable guitars ever made, brought back through the magic and artistry of the Gibson Custom Shop. The Gibson Explorer™ was way ahead of its time when it was introduced in 1958, and only 19 were shipped that year, but it has become very popular in the years since then. All of the classic vintage Explorer features have been 100% accurately recreated in this Collector's Edition model, right down to the cases, which are just as historically accurate as the guitars themselves. Featuring an ABR-1 bridge and Stop Bar tailpiece, a korina body, Custombucker pickups, korina neck, Brazilian rosewood fretboard, two volume and one tone control with CTS® pots and a phone book capacitor, gold hardware, Kluson® tuners, and a 4-ply off-white pickguard. It also features Custom Aging by the skilled artisans of the Murphy Lab. The Murphy Lab Custom Aged finish treatment, paired with Custom Aged hardware, simulates decades of light play wear, giving it the unique character, vibe, and feel of an original example from the Gibson Golden Era. This limited run of 19 guitars is only available in the USA.
Sold Out $ 9,598.00
Austin, Texas native Gary Clark Jr. is a powerhouse guitarist, singer, and songwriter who fuses blues, rock, soul, and hip-hop into a genre-defying sound that’s unmistakably his own. With four GRAMMY® Awards and a reputation for electrifying live performances, Clark stands among the most influential guitarists of his generation. He has two previous Gibson and Epiphone signature models—an SG™ and Casino™—each capturing a piece of his sonic identity. Now, Gibson Custom, in partnership with Gary Clark Jr., is very proud to introduce the Gary Clark Jr. ES-355. Inspired by the moment he first saw B.B. King wielding one on stage, Clark’s ES-355 has become his new number-one guitar.
The Gary Clark Jr. ES-355 features a three-ply maple/poplar/maple body with a figured maple outer layer, a mahogany neck with a 50s Rounded Medium C profile, and a bound ebony fretboard equipped with 22 Historic medium jumbo frets and adorned with mother-of-pearl block inlays. The body has multi-ply top and back binding, and the headstock is also multi-ply bound and features the Custom split diamond inlay in mother-of-pearl and is equipped with Grover® Rotomatic® with Kidney button tuners.
The Gary Clark Jr. ES-355 is powered by a pair of unpotted Custombucker pickups with Alnico 3 magnets that are wired to CTS® audio taper potentiometers and paper-in-oil capacitors, along with a Switchcraft® three-way toggle switch and 1/4” output jack. The volume and tone controls are topped with black Top Hat knobs with silver reflectors and equipped with dial pointers. A mono Varitone control with a black chicken head knob provides even more tonal versatility.
The hardware is VOS nickel, including the ABR-1 Historic no-wire bridge, and the guitar is finished in a striking VOS Cobra Burst finish. A Bigsby® B7 Vibrato adds additional expressiveness. The included Gibson Custom hardshell case has a brown exterior, black plush interior, and Gary Clark Jr. graphics on the exterior. Only 100 of these exceptional guitars have been handcrafted by the expert luthiers of the Gibson Custom Shop in Nashville, Tennessee, and this special limited run is sure to go fast, so get yours today while they’re still available.
Here are your specs cleaned up and organized into clear bullet points with headers:
Limited edition of 100 guitars
3-ply figured maple/poplar/maple body with solid maple centerblock
Bound one-piece ebony fretboard with 22 reissue medium jumbo frets and mother-of-pearl block inlays
Mahogany neck with a 50s rounded Medium C profile
Mother-of-pearl split diamond headstock inlay
Grover Rotomatic tuners with kidney buttons
Custombucker Alnico 3 pickups (unpotted)
Hardshell case with Gary Clark Jr. external graphic
Back: 3-ply Figured Maple/Poplar/Maple
Binding: 7-ply Top, 5-ply Back and Headstock, Single-ply Fretboard
Body Finish: Nitrocellulose VOS
Body Material: 3-ply Figured Maple/Poplar/Maple
Body Shape: ES-335
Body Styles: ES
Bracing: Spruce
Centerblock: Maple
Side: 3-ply Figured Maple/Poplar/Maple
Top: 3-ply Figured Maple/Poplar/Maple
Fingerboard Material: Ebony
Fingerboard Radius: 304.8mm / 12.0in
Fret Count: 22
Frets: Reissue Medium Jumbo
Inlays: Mother of Pearl Block
Joint: Glued In, Set Neck; Long Tenon
Neck Material: Mahogany
Nut Material: Nylon Reissue
Nut Width: 42.85mm / 1.69in
Profile: 50s Rounded Medium C
Scale Length: 628.65mm / 24.75in
Bridge Pickup: Custombucker Alnico 3 Magnet
Controls: Mono Varitone, 2 Volume, 2 Tone; CTS 500k Audio Taper Potentiometers, Paper-in-Oil Capacitors
Neck Pickup: Custombucker Alnico 3 Magnet
Output Jack: 1/4" Switchcraft
Pickup Selector: Switchcraft 3-way Toggle
Bridge: ABR-1 Historic No-Wire
Control Knobs: True Historic Gold Top Hat with Dial Pointer; Black Chicken Head Varitone Knob
Finish: VOS Nickel
Mounting Rings: Black
Pickguard: 5-ply Black ES-355
Pickup Covers: Nickel
Strap Buttons: 2 - Aluminum
Switch Tip: True Historic Amber
Switchwasher: Varitone: Black with Gold Text
Tailpiece: Bigsby B7 Vibrato
Truss Rod: Adjustable
Truss Rod Cover: True Historic
Tuner Plating: VOS Nickel
Tuning Machines: Grover Rotomatic with Kidney Button
Case: Custom Hardshell
Model: 59ES355GCJCBVONH1
Headstock Inlay: Gibson Logo and Custom Split Diamond in Mother-of-Pearl
Strings Gauge: .010, .013, .017, .026, .036, .046
$ 12,000.00
Jeff Beck is gone but never forgotten – widely considered one of the best guitarists in history, capable of playing virtually anything in his own unique, soulful style. And like Jimmy Page and Eric Clapton, Beck got his start playing the Yardbirds, making groundbreaking music on a ’59 Les Paul Standard, which he continued to use and share with the likes of Page and Keith Richards, as documented in many photographs.
The “YardBurst” is as indelible to Jeff Beck’s playing history as his Oxblood Les Paul. Its unique and highly identifiable traits include classic white bobbin humbuckers and a black single ply pickguard. This recreation is true to how it appeared during Jeff’s hallowed Yardbirds days, with a custom Murphy Lab aging treatment, a custom hardshell case, and case candy commemorating the life of the legend that is Jeff Beck.
Serial Number: YB 112
Weight: 8.4 lbs
Body
Neck
Hardware
Electronics
Cases and SKUs
$ 9,999.00 $ 11,998.00
There are very few guitars that can claim to be as instantly recognizable and iconic as Jimmy Page's 1969 EDS-1275 Doubleneck. The photos of him playing it on stage with Led Zeppelin are indelible to rock 'n' roll history. While Gibson has been making doubleneck electric guitars since 1958, Jimmy was the player who defined the EDS-1275 from the day it was delivered to him. The Gibson EDS-1275 allowed him to play the numerous 6 and 12-string acoustics and electric guitar parts of Stairway to Heaven during live performances. He later used the EDS-1275 for The Song Remains the Same, The Rain Song, Celebration Day, Tangerine, and more recently at The Rock & Roll Hall of Fame in November 2023.
Serial Number: CS600011
Weight: 11.4 lbs
Sold Out
**This guitar is used and in excellent condition. Little to no signs of wear. The price has been adjusted accordingly.
Serial Number: 92646
Weight: 9 lbs
Some of the most beautiful Les Pauls ever made were featured in the famous Beauty of the Burst book. Gibson Custom has re-created some of these fantastic finishes on a limited basis. This Les Paul has been finished to match the guitar on page 59 in the Beauty of the Burst book. The Gibson Custom 1959 Reissue Les Paul solidbody electric guitar comes as close as possible to recreating the legendary '59 model Les Paul, giving you a chance to own one of these incredible instruments, without spending a fortune. Every detail is as close to spot-on as possible, down to the hand-carved maple top and non-weight-relieved mahogany body. A pair of Gibson's legendary Burstbucker pickups also gives the 1959 Reissue Les Paul the sound of classic PAF humbuckers.
Gibson Custom 1959 Reissue Les Paul Solidbody Electric Guitar Features:
Sold Out $ 8,398.00
Serial Number: CS402983
Weight: 8.4 lbs
Neck
Fingerboard
Body
Binding
Hardware & Parts
Electronics
Finish
$ 7,399.00 $ 8,892.00
Neck
Raw: NECK BLANK,MAHOGANY, 17 DEGREES
Head Veneer: HEAD VENEER, LES PAUL CUSTOM FIBER SPLIT DIAMOND INLAY
Scale: 24 3/4"
Truss Rod: Modern Teflon Wrapped
Spline: Maple
Neck Assembly: LP Custom Modern
Neck Profile: LPC Modern/Medium C-Shape
Fingerboard
Raw: Blank Ebony 1 Piece
Inlaid: Inlaid 1 Piece Ebony Tapered Mother of Pearl Block
Fretwire: Fret Wire, Reissue Jescar
Binding: White T .062
Side Dots: Black
Assembly: LPC Modern Ebony Tapered Pearl Block
Nut: Corian
Body
Top Wood: AAA Figured Maple (hand-picked by Paul)
Back Wood: Mahogany (lightweight, 9-hole weight relief)
Body Binding: 7-ply Black / Top + 5-ply Back
Body Assembly: LPC Modern
Body Weight Relief: Routed / weight relieved figured assembly
Routing
Pickup Route: Les Paul Custom Modern
Pickup Configuration: 2 Humbuckers
Controls: Tune-O-Matic, Stopbar, RH
Finish
Top Finish: Trans Whale Blue Gloss
Filler: Walnut filler – cobalt
Antique Finish: No coat antique
Walnut filler (cobalt) applied
Gloss finish
Hardware
Hardware Finish: Nickel
Bridge: Tune-O-Matic
Tailpiece: Stopbar (Nickel)
Tailpiece Stud: LPC stud stopbar steel short nickel
Tailpiece Anchors: Vintage long
End pin aluminum
Slider end pin screw: #6 × 1
Butt end pin screw: #8 × 1-1/2 oval
Electronics
Neck Pickup: 490R Nickel (Black mounting ring)
Bridge Pickup: 498T Nickel (Black mounting ring)
Toggle Switch: Black tip
Toggle Assembly: Cream
Jackplate: Nickel
Multi-ply Les Paul Custom style
Instruction: Do not install pickguard in case
$ 7,399.00 $ 8,894.00
Model: 1959 Les Paul Standard Reissue
Finish Type/Aging: VOS
Color: Bourbon Burst
Finish (Top, Back, Neck, Rims): Full Cherry Aniline Dye
Coats of Antique: 2
Peg Head Face: Black (Standard)
Decal: Les Paul
Serial #: Ink Stamped 9xxxxx
Country of Manufacture: U.S.A.
Neck Blank: Mahogany, 17° headstock angle
Head Veneer: Les Paul Reissue (without holly inlay)
Scale Length: 24.75"
Truss Rod Assembly: Historic 1950s, brass anchor offset pellet
Spline Material: Maple
Neck Assembly: Les Paul Reissue
Neck Profile: 1959 V1 Carmelite (.860" / .960")
Material: Indian Rosewood, 1 pc
Inlays: Aged Cellulose Trapezoid
Frets: Jescar Medium Jumbo
Binding: Cream, .040"
Side Dots: Tortoise Shell
Assembly: Aged Cellulose Inlay
Nut: Nylon Reissue
Top: Figured AAA Maple, hand-picked by Paul H.
Back: Mahogany (1 piece), light weight
Top Binding: Cream
Back Binding: Cream
Body Assembly: Les Paul Reissue Routed
Finish: VOS (Nickel)
Bridge: ABR-1 Historic Reissue (no wire, notched saddles)
Tailpiece: Lightweight Aluminum, Historic Spec
Bridge Thumbwheels: ABR Steel
Stop Bar Anchors: Vintage Long
Machine Heads: Kluson Deluxe Single-Band, Nickel
Pickguard: Historic Cream
Jack Plate: Reissue Black
Switch Tip: Cream Historic
Switch Washer: Cream Historic
Back Plates: LP ’59 Reissue Black
Strings: .010–.046 Nickel Plated Steel
Hardware Material: Nickel (matched)
Strap Buttons: Historic Butt and Shoulder Style
Toggle Assembly: Historic Nickel
Pickups:
Bridge: CustomBucker Aged Alnico 3, 15.5k (un-potted)
Neck: CustomBucker Aged Alnico 3, 15.5k (un-potted)
Pickup Mounting Rings: Historic Cream
Pickup Covers: Historic Nickel
Knobs: Gold Top Hat, True Historic
Dial Pointers: Nickel (Bleeders)
Control Layout: 2 Volume, 2 Tone
Wiring: 1950s Vintage-Style
Special Controls: None
Hand-picked AAA Maple top by Paul H.
Bourbon Burst VOS finish
Sold Out $ 8,894.00
Model: 1959 Les Paul Standard Reissue
Finish Type/Aging: VOS
Color: Dirty Lemon
Finish (Top, Back, Neck, Rims): Full Cherry Aniline Dye
Coats of Antique: 2
Peg Head Face Color: Black (Standard)
Decal: Les Paul
Serial #: Ink Stamped 952819
Country of Manufacture: U.S.A.
Neck Blank: Mahogany, 17° headstock angle
Head Veneer: Les Paul Reissue (without holly inlay)
Scale Length: 24.75"
Truss Rod Assembly: Historic 1950s brass anchor offset pellet
Spline Material: Maple
Neck Assembly: Les Paul Reissue
Neck Profile: 1959 V1 Carmelite (.860" / .960")
Material: Indian Rosewood, 1 piece
Inlays: Aged Cellulose Trapezoids
Frets: Jescar Medium Jumbo
Binding: Cream, .040"
Side Dots: Tortoise Shell
Assembly: Aged Cellulose Inlay
Nut: Nylon Reissue
Top: Figured Maple LP AAA, hand-picked by Paul
Back: Mahogany, 1 piece, 8.3–9.2 lbs light weight
Top Binding: Cream
Back Binding: Cream
Body Assembly: Les Paul Reissue Routed
Finish: VOS (Nickel)
Material: Nickel (matched)
Bridge: ABR-1 Historic Reissue (no wire, notched saddles)
Bridge Thumbwheels: ABR Steel
Tailpiece: Lightweight Aluminum, Historic Spec
Stop Bar Anchors: Vintage Long
Machine Heads: Kluson Deluxe Single-Band (Nickel)
Pickguard: Historic Cream
Jack Plate: LP ’09 Reissue Black
Switch Tip: Amber Historic
Switch Washer: Cream Historic
Back Plates: LP ’09 Reissue Black
Control Plate (Switch): Historic Cream
Strings: .010–.046 Nickel Plated Steel
Tailpiece Studs: Historic Nickel, Aged
End Pin: Aluminum
Strap Buttons: Historic Butt & Shoulder Style
Truss Rod Cover: Historic Cream
Medallion: 2025 “Handcrafted in Nashville”
Toggle Assembly: Historic Nickel
Pickups:
Bridge: CustomBucker Aged Alnico 3, 15.5k (un-potted)
Neck: CustomBucker Aged Alnico 3, 15.5k (un-potted)
Pickup Mounting Rings: Historic Cream
Pickup Covers: Collector’s Edition 2023 NP
Knobs: Gold Top Hat, True Historic
Dial Pointers: Nickel (Bleeders)
Control Layout: 2 Volume, 2 Tone
Wiring: 1950s Vintage-Style
Special Controls: None
Sold Out $ 8,994.00
Neck
Fingerboard
Body
Finish
Hardware & Parts
Electronics
$ 4,999.00 $ 6,958.00
Gibson Custom Shop is the pinnacle of craftsmanship, quality, and sound excellence. Each instrument celebrates Gibson's legacy through accuracy, authenticity and attention to detail.
The iconic '57 Goldtop has been the tool of choice for countless guitar heroes. Its elegant gold finish, classic solid mahogany/maple construction and versatile humbucking pickups represent everything one could possibly need in a Les Paul model. This authentic recreation exemplifies Gibson Custom Shop's tireless quest for accuracy to the original year of production, from the woods to the construction to the parts and precise contours throughout. Each Custom Shop Reissue is every bit the instrument and statement piece as the priceless vintage examples, providing an ownership experience that is endlessly fun.

$ 7,500.00
This guitar is in excellent condition for its age. Has 4 small indents in wood on the back which are only noticeable in certain lighting. Bridge pickup has very minor tarnishing on the edge of the cover (see pictures). Comes with OHSC and Gold Book COA.
Body
Neck
Fingerboard
Pickups

Sold Out $ 10,699.00
Body
Neck
Fingerboard
Hardware
Electronics

$ 8,099.00 $ 9,299.00
SPECIFICATIONS
BODY
NECK
FINGERBOARD
BINDING
HARDWAER
ELECTRONICS
FINISH
$ 14,999.00 $ 17,998.00
Metallica fans worldwide are familiar with Kirk Hammett's 1979 Flying V. It was Kirk's first Gibson and established his passion for Gibson guitars. Its purchase was inspired by famous Flying V players Kirk admired and because he was looking for a fuller sound. And what a sound! Kirk still plays the original guitar to this day, and used it on all the early Metallica albums, including Kill 'Em All, Ride the Lightning, Master of Puppets, And Justice for All, and The Black Album, making it one of the most important heavy metal guitars of all time. Only 200 were hand-made by the expert luthiers of the Gibson Custom Shop in Nashville, Tennessee, artfully aged to match the original by the Murphy Lab. The included Certificate of Authenticity photo is signed by Kirk Hammett himself.
SPECS
Body
Material: 1-piece Mahogany
Neck
Inlay: Perloid Dot
Hardware
Electronics
Case
$ 2,799.00 $ 3,358.00
***Has small finish cracks near headstock. Pictured***
Dave Mustaine is the legendary guitarist, vocalist, songwriter, and founder of the multi-platinum selling and Grammy® Award-winning band, MEGADETH. His new Gibson Dave Mustaine Flying V™ EXP Artist model delivers the powerful, heavy sound and exceptional playing performance that he demands. The 25.5” scale mahogany neck has an ebony fretboard with a compound fretboard radius, 24 medium jumbo frets, mother of pearl “teeth” inlays, an Explorer™-style headstock with Grover® Mini Rotomatic® tuners with Kidney buttons, and a Graph Tech® nut. The mahogany Flying V-style body is equipped with a Tune-O-Matic™ bridge, a Stop Bar tailpiece, and a Dave Mustaine signature Seymour Duncan® Thrash Factor pickup set. The Antique Natural and Silver Metallic nitrocellulose lacquer finishes are complemented by black chrome hardware. A hardshell case is also included.

$ 3,499.00 $ 4,198.00
At Gibson, we know that players have distinct preferences when it comes to their instruments. Some gravitate toward certain models, and many have strong attachments to specific production periods due to differences in finishes, pickup designs, subtle component changes (such as pickguards, inlays, and plastics), and evolving neck profiles. Our Les Paul Standard 50s and 60s models have been embraced by musicians for exactly these reasons, offering the ability to choose the feel and features that suit them best. Now, ES-335™ fans can enjoy the same level of choice with the arrival of the ES-335 50s and ES-335 60s.
The ES-335 50s revives the foundational elements of the earliest ES-335 guitars introduced in 1958. Its semi-hollow, thinline body is constructed from three-ply maple, poplar, and maple, paired with a solid maple centerblock that enhances sustain and significantly curbs feedback. Single-ply cream binding along the top and back adds a clean, vintage-inspired accent.
True to the original run of ES-335 models, the mahogany neck is carved to a substantial Rounded C profile that offers a full, comfortable feel. The bound rosewood fretboard features 22 medium jumbo frets and traditional acrylic dot inlays, echoing the look of the first "dot neck" ES-335 instruments. Vintage Deluxe tuners with keystone buttons, working alongside the Graph Tech® nut, provide impressive tuning stability. The headstock is also dressed with a mother-of-pearl Gibson logo and crown inlav.
On the opposite end of the strings, an ABR-1 Tune-O-Matic™M bridge and aluminum Stop Bar tailpiece contribute to the guitar's strong sustain while allowing precise adjustment of action and individual intonation settings.
A pair of Custombucker pickups with Alnico 3 magnets powers the ES-335 50s, delivering the sought-after sound associated with the earliest Patent Applied For humbucker™M pickups from the late 1950s. Each pickup is connected to its own hand-wired 500k volume and tone control, and together with the three-way toggle switch, they offer the wide-ranging tonal flexibility that has defined the ES-335 for decades.
A '59-style, five-ply long pickguard and gold Top Hat knobs with dial pointers round out the 50s-inspired aesthetic. Offered in Vintage Tobacco Burst, Vintage Natural, and Ebony gloss nitrocellulose lacquer finishes, the ES-335 50s comes with a Gibson hardshell case. For lavers who favor the fuller neck profile and visual styling of the earliest ES-335 models, this version captures the essence of the quitars that have remained beloved for more than 60 ears.
Body
Binding: Single-ply cream, top and back
Body Material: Maple/poplar/maple
Body finish: Gloss nitrocellulose lacquer
Body shape: ES-335
Body Style: Semi-hollow body
Neck
Profile: Rounded C
Frets: Medium jumbo
Joint: Glued in, set neck
Fingerboard material: Rosewood
Nut Material: Graph Tech
Inlays: Dot
Fingerboard Radius: 12 in. | 304.8 mm
Binding: Single-ply
Scale Length: 24.75 in. | 628.7 mm
Electronics
Neck pickup: Custombucker Alnico 3
Bridge pickup: Custombucker Alnico 3
Controls: 2 volume, 2 tone, hand-wired with 500k potentiometers and Orange Drop capacitors
Pickup selector: 3-way toggle
Hardware
Bridge: ABR-1 Tune-O-Matic
Finish: Nickel
Plastics: Black
Tuning machines: Vintage Deluxe with keystone button
Control knobs: Gold Top Hats with dial pointers
Pickup cover: Nickel
Tailpiece: Stop Bar
$ 3,499.00 $ 4,198.00
Guitarists know what they like, and at Gibson, we've long recognized that those preferences can be highly specific. Some musicians connect with one model over another, and many gravitate toward particular model-year eras because of shifts in color options, pickup choices, subtle feature differences (such as pickguards, inlays, and plastics), and changing neck profiles. Our Les Paul™M Standard 50 and 60s models have resonated with players for exactly that reason, offering a way to choose the feel and features that suit them best. With that same philosophy in mind, we're now extending this approach to ES-335™ enthusiasts with the release of the ES-335 50s and ES-335 60s.
The ES-335 60s captures the essential characteristics of early 1960s ES-335 instruments. Its semi-hollow, thinline body is constructed from three-ply maple, poplar, and maple, paired with a solid maple centerblock that enhances sustain while significantly minimizing feedback. Single-ply cream binding along the top and back adds a refined visual touch.
True to the early 60s originals, the mahogany neck features the Slim Taper ™ profile, offering a sleeker, faster feel than the thicker Rounded C profile found on the ES-335 50s. The bound rosewood fretboard includes 22 medium jumbo frets and small block acrylic inlays, delivering the familiar look of classic 60s ES-335 models.
High-quality Grover® Rotomatic® tuners with milk bottle buttons work seamlessly with the Graph Tech® nut to ensure exceptional tuning stability. A mother-of-pearl Gibson logo and crown inlay adorn the headstock.
At the opposite end of the strings, an ABR-1 Tune-O-Matic ™ bridge and aluminum Stop Bar tailpiece contribute to the guitar's excellent sustain and offer full control over action height and individual intonation adjustments.
A pair of calibrated T-Type humbucker™ pickups with Alnico 5 magnets powers the ES-335 60s, delivering the unmistakable character of vintage Gibson T-Top humbucker™M tones. Each pickup connects to its own hand-wired 500k volume and tone controls, and together with the three-way toggle switch, they provide the broad tonal palette that has defined the ES-335 for generations.
A five-ply, 60s-style pickguard, along with black Top Hat knobs featuring reflectors and dial pointers, completes the period-inspired aesthetic. Available in Vintage Burst, Sixties Cherry, and Dark Walnut gloss nitrocellulose finishes, the ES-335 60s ships with a Gibson hardshell case. For players who favor the streamlined neck shape and visual style of 60s-era ES-335 designs, this model delivers the feel and sound that have made these instruments cherished for more than six decades.
Body
Binding: Single-ply cream, top and back
Body Material: Maple/poplar/maple
Body finish: Gloss nitrocellulose lacquer
Body shape: ES-335
Body Style: Semi-hollow body
Neck
Profile: SlimTaper
Frets: Medium jumbo
Joint: Glued in, set neck
Fingerboard material: Rosewood
Nut Material: Graph Tech
Inlays: Small block
Fingerboard Radius: 12 in. | 304.8 mm
Binding: Single-ply
Scale Length: 24.75 in. | 628.7 mm
Electronics
Neck pickup: T-Type
Bridge pickup: T-Type
Controls: 2 volume, 2 tone, hand-wired with 500k potentiometers and Orange Drop capacitors
Pickup selector: 3-way toggle
Hardware
Bridge: ABR-1 Tune-O-Matic
Finish: Nickel
Plastics: Black
Tuning machines: Grover Rotomatic "Milk Bottle" with kidney button
Control knobs: Black Top Hats with silver inserts
Pickup cover: Nickel
Tailpiece: Stop Bar
Sold Out $ 4,198.00
From its inaugural appearance in 1958, the Gibson ES-335 has remained an unmatched standard, prized for its versatility and rich tonal palette. Its laminated maple/poplar/maple body and solid maple centerblock help control feedback while retaining the airy resonance that has made the ES-335 beloved by players across genres—from warm jazz to articulate rock, and all sonic stops in between. A mahogany neck with a Rounded C profile provides a comfortable grip, whether you’re playing chords in the lower register or exploring melodic lines further up. The bound rosewood fretboard with acrylic Dot inlays offers a timeless aesthetic, while Vintage Deluxe tuners with Keystone buttons complete the classic headstock look. Paired with a lightweight aluminum ABR-1 Tune-O-Matic™ bridge and Stop Bar tailpiece, players can count on precise, stable tuning and accurate intonation for every performance. Calibrated T-Type humbuckers™ deliver a dynamic blend of vintage-inspired sweetness and modern definition, while hand-wired controls with Orange Drop® capacitors in the tone circuit ensure responsive, musical adjustments to volume and tone.
Renowned for its comfort and remarkable sonic adaptability, the ES-335 is a standout choice for players seeking timeless tone and contemporary reliability in one inspiring instrument.
Back: 3-ply Maple/Poplar/Maple
Top: 3-ply Maple/Poplar/Maple
Bracing: Spruce
Centerblock: Maple
Binding: Single-ply Cream
Body Finish: Gloss Nitrocellulose Lacquer
Body Shape: ES-335
Body Style: ES
Neck Material: Mahogany
Profile: Rounded C
Scale Length: 628.65mm / 24.75in
Fingerboard Material: Rosewood
Fingerboard Radius: 304.8mm / 12.0in
Fret Count: 22
Frets: Medium Jumbo
Inlays: Acrylic Dots
Nut Material: Graph Tech
Nut Width: 43.05mm / 1.7in
End of Board Width: 57.4mm / 2.26in
Neck Pickup: Calibrated T-Type Rhythm
Bridge Pickup: Calibrated T-Type Lead
Controls: 2 Volume, 2 Tone, hand-wired with 500K potentiometers and Orange Drop capacitors
Pickup Selector: 3-way Toggle
Output Jack: 1/4"
Bridge: ABR-1 Tune-O-Matic
Tailpiece: Aluminum Stop Bar
Tuning Machines: Vintage Deluxe with Keystone Button
Pickguard: Black 5-ply
Control Knobs: Black Top Hat with Silver Reflector
Switch Tip: Cream
Finish: Nickel
Model: ES3500SCNH1
Case: Hardshell
Accessories: Includes Gibson Accessory Kit
String Gauge: .010, .013, .017, .026, .036, .046
$ 3,999.00 $ 4,798.00
The Gibson ES-335 Figured is the perfect blend of form and function. Crafted with a maple centerblock and quarter-sawn Adirondack spruce bracing, players will be impressed by the lightweight feel and expanded range of tonal capabilities. Equipped with high-end appointments like our hand-wired control assembly with Orange Drop® capacitors, Gibson's new Calibrated T-Type humbucking pickups, Vintage Deluxe style tuners and light weight aluminum ABR-1 bridge and Stop Bar tailpiece anchored with steel thumb-wheels and studs. The AAA figured maple is set off by staggering gloss finishes including Sixties Cherry, Antique Natural, and Iced Tea.
