Products
Action Custom Straps BlackHeart 80 Guitar Strap - Soft Cabretta Leather and Black Cowhide
$ 165.00
Huber Breese is proud to team up with Terry Misner and the Action Custom Straps brand of Indianapolis, IN to carry a small run of straps in our store! Action Custom Straps not only makes some of the finest hand made straps on the market, but also makes straps for some of the biggest names in the music industry! Artists such as Jimmy Buffet, Mac McAnally, Keith Urban, Billy Corgan, Elvis Costello, Miranda Lambert, Eric Church, Trace Adkins, Gary Clark Jr., Travis Tritt, and many more!
The Blackheart 80 custom guitar strap is made using a very soft top grain cowhide leather for the hand rolled body. Hand rolling the edges of the body means that the sides are rounded, thus eliminating any edges that might even slightly irritate your neck with extended wear. Adding even more softness and a subtle contrast in materials is the inlaid cabretta leather.
Action Custom Straps decided with their very first guitar strap not to cut holes in the body of our straps (which is too soft to be used in this way), so they added an additional hidden adjustment piece that gives a clean and custom look no matter where the strap is adjusted. This way, soft leather is used where it can be appreciated and stronger leather where it is needed! After the strap is assembled, it is sewn with a double row of strong black thread.
The Blackheart Series 80 is 2" wide and will adjust from 44" to 54".
Action Custom Straps Custom Limited Edition Simply Classy Black with Diamond Watersnake Ends Guitar Strap
$ 175.00
Huber Breese is proud to team up with Terry Misner and the Action Custom Straps brand of Indianapolis, IN to carry a small run of straps in our store! Action Custom Straps not only makes some of the finest hand made straps on the market, but also makes straps for some of the biggest names in the music industry! Artists such as Jimmy Buffet, Mac McAnally, Keith Urban, Billy Corgan, Elvis Costello, Miranda Lambert, Eric Church, Trace Adkins, Gary Clark Jr., Travis Tritt, and many more!
Premium black leather guitar strap with Diamond Watersnake Ends. Measures 44"-54" in length.
Action Custom Straps Custom Limited Edition Simply Classy Black with Vintage Python Ends Guitar Strap
$ 175.00
Huber Breese is proud to team up with Terry Misner and the Action Custom Straps brand of Indianapolis, IN to carry a small run of straps in our store! Action Custom Straps not only makes some of the finest hand made straps on the market, but also makes straps for some of the biggest names in the music industry! Artists such as Jimmy Buffet, Mac McAnally, Keith Urban, Billy Corgan, Elvis Costello, Miranda Lambert, Eric Church, Trace Adkins, Gary Clark Jr., Travis Tritt, and many more!
Premium black leather guitar strap with Vintage Python Ends. Measures 44"-54" in length.
Action Custom Straps Limited Edition Shark Skin in Black Leather Guitar Strap
$ 300.00
Huber Breese is proud to team up with Terry Misner and the Action Custom Straps brand of Indianapolis, IN to carry a small run of straps in our store! Action Custom Straps not only makes some of the finest hand made straps on the market, but also makes straps for some of the biggest names in the music industry! Artists such as Jimmy Buffet, Mac McAnally, Keith Urban, Billy Corgan, Elvis Costello, Miranda Lambert, Eric Church, Trace Adkins, Gary Clark Jr., Travis Tritt, and many more!
This Limited Edition leather guitar strap has an insert made of real SHARK!
dunnnnn dunn....dunnnnnnn dun...dun dun dun dun.....You get the idea ;-)
Action Custom Straps decided with their very first guitar strap not to cut holes in the body of our straps (which is too soft to be used in this way), so they added an additional hidden adjustment piece that gives a clean and custom look no matter where the strap is adjusted. This way, soft leather is used where it can be appreciated and stronger leather where it is needed! After the strap is assembled, it is sewn with a double row of strong black thread.
The
Limited Edition Shark Skin in Black Leather strap is 2 1/2" wide and will adjust from 47" to 57".
Action Custom Straps Simply Classy Cobalt Blue with Pinstriping Guitar Strap
$ 145.00
Huber Breese is proud to team up with Terry Misner and the Action Custom Straps brand of Indianapolis, IN to carry a small run of straps in our store! Action Custom Straps not only makes some of the finest hand made straps on the market, but also makes straps for some of the biggest names in the music industry! Artists such as Jimmy Buffet, Mac McAnally, Keith Urban, Billy Corgan, Elvis Costello, Miranda Lambert, Eric Church, Trace Adkins, Gary Clark Jr., Travis Tritt, and many more!
Action Custom Strap's Simply Classy Cobalt Blue with Pinstriping custom guitar strap is soft and comfortable from the moment you put it on. If you don't want your name or in initials on your guitar strap, but want a comfortable strap that has a touch of custom, then take a close look at their Pinstriping series.
The Cobalt Blue with Pinstriping custom guitar strap features a finished one piece body that is carefully and precisely folded and seamed down the back after it is embroidered. And you know that the leather must be soft in order to do that! This method of construction eliminates any edges, however slight, that can cut into your neck when you are playing a long set. Then add six more precisely cut pieces of leather to the body and it is ready to sew, along with the tailpiece, with a single outside matching stitch.
This strap is in the standard length and will adjust from 44" to 54". And in the 100 Series that is shown, the width is 2 1/2".
At Action Custom Straps we prefer not to cut holes in the body of their straps (which is too soft to be used in this way), so one of those six pieces is a hidden adjustment piece that gives a clean look no matter where the strap is adjusted. Soft leather is used where it can be appreciated and stronger leather where it is needed!
**Guitar pictured is not included.
AKG D12VR Reference Kick Drum Microphone
$ 603.00 $ 755.09
The D12 VR is a large-diaphragm cardioid dynamic microphone. Designed specifically for kick-drum recording applications, the microphone has a thin diaphragm to enhance the low frequency performance. Its predecessors have been the industry standard in kick drum mics for decades. The D12 and subsequently the D12E and the D112 have been the choice of drummers and the live sound engineers who love them since 1950.
Without phantom power, the microphone delivers the pure character of the sound source. With phantom power enabled, one of three switchable active-filter presets can be used to quickly adapt the microphone response to suit the desired kick-drum sound. The filter setting can be controlled using a switch on the microphone body. In this mode the output level is also reduced by 10 dB automatically.
Check it out. The latest version of a classic. It has retained the attributes of the original but taken advantage of modern innovations. Vintage and modern have just met up, and they have done so in front of the kick drum head.
D12VR Large-Diaphragm Cardioid Dynamic Kick Drum Mic
- Type: dynamic pressure gradient transducer
- Polar pattern: cardioid
- Frequency range: 17 - 17000 Hz (±2 dB)
- Sensitivity: 1,2 mV/Pa ± -58 dBV (at 1000 Hz passive)
- Max. SPL: 164 dB SPL (for 0,5 % THD)
- Impedance: <200 ohms (at 1000 Hz)
- Recommended load impedance: >1000 ohms
- Environment temperature range: -10 C - +70 C
- relative humidity at +20 C: 90 %
- Connector: three-pin male standard XLR
- Finish front grille: glossy galvanized nickel matte,
- rear grille: matte black paint
- Dimensions: 125 mm x 101 mm x 66 mm (4.9" x 3.9" x 2.6")
- Net weight: 500 g (1.1 lbs)
AKG D40 Professional Dynamic Instrument Microphone
$ 139.00 $ 194.40
SOUND IN MOTION
for drums, percussion, wind instruments and guitar amps on stage
The D40 professional instrumental microphone with its solid all-metal body will stand up to the hardships of night-after-night onstage use with a smile. Its patented Varimotion diaphragm uses a unique laminated material to damp high resonance peaks, leading to a quantum leap in audio performance. The transducer is protected by a sturdy wire-mesh cap and can take extremely high sound pressure levels with ease.
An integrated stand adapter in combination with the included H440 mounting bracket makes the D40 a highly versatile tool for use on drums, percussion, wind instruments and guitar amps.
TECHNICAL SPECIFICATION
General
- Audio Frequency bandwidth: 75 to 17000 Hz
- Sensitivity: 2.2 mV/Pa
- Electrical Impedance: 200 Ohms
- Recommended Load Impedance: 2000 Ohms
- Polar Pattern: cardioid
Audio Output
- Type: Balanced XLR
- Gender: Male
- Contacts: 3-pin
Design
- Body: Metal
- Finish: dark stage blue
Dimensions / Weight
- Length: 104 mm
- Height: 79 mm
- Diameter: 44 mm
- Net Weight: 245 g
AKG P170 Instrument Microphone
$ 115.00 $ 150.00
The P170 is a small-diaphragm condenser microphone for recording percussion, acoustic guitars and perhaps most typically, drum set from the overhead position. Its lightweight 1/2" true condenser transducer diaphragm delivers outstanding clarity and transient response. It is an affordable alternative to the revered 'pencil' microphones. They are often purchased in pairs for overhead applications.
P170 Project Studio Condenser Microphone
-
General
Audio Frequency bandwidth: 20 to 20000 Hz
Sensitivity: 15 mV/Pa
Equivalent Noise Level: 19 dB-A
Signal to Noise: 75 dB-A
Preattenuation Pad: -20 dB
Electrical Impedance: <= 200 Ohms
Recommended Load Impedance: >=1000 Ohm
Polar Pattern: Cardioid
Powering Interface
Voltage: 44 to 52 V
Current: <= 3 mA
Audio Output
Type: Balanced XLR
Gender: Male
Contacts: 3-pin
Dimensions / Weight
Height: 160 mm
Diameter: 22 mm
Net Weight: 130 g
AKG Perception 45 Instrumental Set Wireless System
$ 249.00 $ 379.00
The Perception Wireless Instrumental Set comprises an SR 45 receiver and PT 45 bodypack transmitter, the smallest and lightest transmitter in its class. It can be used with many AKG miniature microphones, and the battery compartment cover doubles as a convenient tool for setting input gain for the application at hand.
The system comes complete with a universal power supply with US/UK/EU adapter, MKG L cable with ¼" jack plug and mini XLR connector, and one AA size dry battery.
In combination with the C 519 ML (sold separately) also suitable for wind instruments.
SR 45 Stationary Receiver
The SR 45 Stationary Receiver delivers a diversity system, professional XLR and Jack outputs, and the SMPS solution. The audio level and squelch threshold are adjustable on the receiver. It is a stationary receiver for use with all transmitters of the Perception wireless system.
The SR 45 operates within a switching bandwidth of up to 30 MHz in the 500 to 560 MHz UHF carrier frequency range and offers up to 8 selectable carrier frequencies.
PT 45 bodypack transmitter
The PT 45 bodypack transmitter lets you use both dynamic microphones and condenser microphones operating on a supply voltage of approx. 4 V. Naturally you may also connect an electric guitar, electric bass or keytar.
The PT 45 operates within a switching bandwidth of up to 30 MHz in the 500 to 560 MHz UHF carrier frequency range and offers up to 8 selectable carrier frequencies.
Consumer Alert (for US users)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: The system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.
Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones
A wireless system ideal for an exceptionally wide range of applications.
- 30 MHz selection bandwidth (depending on local frequency plans)
- 8 hours of operation with a single AA size battery
- Compatible with all AKG MicroMics
- Low battery indicator
- Smallest and lightest bodypack transmitter in its class
- Complete with MKG L cable for direct connection to electric guitar or bass
- IncludedPT 45 bodypack transmitterAA batteryMKG L cableSR 45 receiverSMPS switched mode power supplyGuarantee cardFrequency tableManual supplement sheet
Order a wireless system that faithfully reproduces the sound of your favorite instrument.
SPECIFICATIONS
Perception Wireless Instrumental Set
- SR 45 Stationary Receiver
- Carrier frequency range: 500 - 560 MHz
- Modulation: FM
- Audio bandwidth: 40 - 20,000 Hz
- T.H.D. at 1 kHz: typ. 0.8%
- Signal/noise ratio: typ. 105 dB(A)
- Squelch threshold: 100 to -70 dBm adjustable
- Audio outputs: Balanced XLR and unbalanced 1/4" (6.3 mm) jack: adjustable from mic to line level. Output level at rated deviation: 500 mV RMS
- Dimensions: 7.87" x 7.48" x 1.73", (200 x 190 x 44 mm)
- Net weight: 12.69 oz, (360 g)
- PT 45 bodypack transmitter
- Carrier frequency range: 500 - 560 MHz
- Modulation: FM
- Audio bandwidth: 40 - 20,000 Hz
- T.H.D. at 1 kHz: typ. 0.8%
- Signal/noise ratio: typ. 105 dB(A)
- RF output: 10 mW
- Power requirement: 1x 1.5 V AA size battery
- Battery life: 10 hours
- Dimensions: 2.36 " x 2.91" x 1.18", (60 x 74 x 30 mm)
- Net weight: 2.11 oz, (60 g)
Allen & Heath Zedi10FX 4-Channel Compact Mixer USED
$ 325.00
**This mixer is used and being sold on consignment. It is in excellent condition with little to no signs of wear. Comes with a Mackie carrying case. The price has been adjusted accordingly.
Specs
- Hybrid mixer with analog control and 4x4 USB audio interface (24-bit/96kHz)
- 4 mic/line inputs with separate XLR and TRS jacks
- 2 stereo line inputs via TRS
- 2 high-impedance Guitar DI inputs – no DI box needed
- Built-in FX engine with studio-quality reverbs, delays, and tap tempo
- 3-band MusiQ EQ for precise tonal shaping
- USB output source options for flexible routing
- Internal FX with tap tempo control
- 48V phantom power for condenser microphones
- Lo-cut filters for removing low-end rumble
- Dedicated aux output for monitors or headphone mixes
- Smooth 60mm main mix fader
- 8-LED metering for accurate signal monitoring
- Includes Cubase LE and Cubasis LE software for PC and iOS
- Rugged construction with internal power supply
Ampeg B-2R 350W Rackmount Bass Amp Head USED
$ 399.99
- Serial Number: TBRDJA0018
Specs
| Brand |
|
|---|---|
| Model |
|
| Finish |
|
| Categories |
|
| Year |
|
| Number of Inputs |
|
| Power Tube Type |
|
| Electronics |
|
| Impedance |
|
| Reverb |
|
| Color Family |
|
| Number of Channels |
|
| Output Power (Watts) |
|
Ampeg Heritage 50th Anniversary SVT Bass Amp Head
$ 2,999.99 $ 4,199.98
The Ampeg® SVT® is more than just a bass amp—it sparked a revolution. When it debuted in 1969, deafening walls of full-stack guitar amps were eating bass players alive. Knowing that big bass volume required big power, Ampeg designed the most sophisticated amp of its day: the 300-watt SVT. Finally, balance returned to the stage and with it a generation of iconic bass-forward music was born. That singular Ampeg spirt of innovation and ingenuity is alive and well in the Ampeg HeritageTM 50th Anniversary SVT bass amp. Designed to honor the unrivaled SVT legacy, the Heritage 50th Anniversary SVT distills the legendary amp’s most celebrated circuits into a single stage-ready head with a host of must-have modern technology and elegant vintage aesthetics. It truly is the SVT for the 21st century.
- The 1969 “Blue Line” and mid-1970s Magnavox-era circuits in one amp
- Handmade in the U.S.A. from durable top-shelf components
- Detailed, period-correct graphics and fonts
- Modern features include a newly enhanced XLR DI output, user biasing, speakOn® outputs, and spring-loaded side handles
- Specially sourced and matched Ampeg Super ValveTM 6550 tubes
- Not a reissue—the ultimate SVT for today
YOU ASKED FOR IT
From well-informed amateurs to elite professionals, no amp enjoys as passionate a fan base as the Ampeg SVT. For this new SVT, Ampeg surveyed its loyal customers to ensure that the design met and surpassed what’s on their wish lists. While each generation of the SVT has its faithful, Ampeg designed the Heritage 50th Anniversary SVT to satisfy even the most discerning SVT aficionados. It’s the SVT everyone has been asking for.
SPECIFICATIONS
- Preamp Tubes: 5 x 12AX7
- Driver Tubes: 1 x 12AX7, 2 x 12AU7
- Power Amp Tubes: Ampeg Super Valve (6 x 6550)
- Output Power Rating: 300W RMS minimum continuous @ <5% THD into @ 2 or 4
- Signal-to-Noise Ratio: (20 Hz – 20 kHz) 75 75 dB (20 Hz - 20 kHz)
- Maximum Gain: 78 dB @ 1 kHz –3 dB @ 20 Hz & 15 kHz
- Tone Controls
- Channel One: Voiced after original 1969 "Blue Line" SVT (jumpable)
- Channel Two: Voiced after mid 70's Magnavox era SVT (jumpable)
- Bass: +12/-12 dB @ 40 Hz
- Midrange: +10/-20 dB @ 220 Hz, 450 Hz, 800 Hz, 1.6 kHz, or 3 kHz
- Treble: +15/–20 dB @ 4 kHz
- Ultra Lo: +2 dB @ 40 Hz, -10 dB @ 500 Hz
- Ultra Hi: +9 dB @ 8 kHz
IDEAL CABINETS
- Heritage HSVT-810AV
- Classic SVT-810AV
- Classic SVT-212AV
- Classic SVT-112AV
Ampeg Micro-CL Stack - Black
$ 429.99 $ 558.98
Let’s face it. You are the type who would happily crank up a full Ampeg SVT stack in your living room. Heck, who needs neighbors anyway? And noise violations are really just a badge of honor, right? For the rest of us, there is the Ampeg Micro-CL Stack, delivering 100 watts of pure Ampeg tone. It’s perfect for those just getting into Ampeg or for the seasoned bassist looking to practice in far flung locations like the master bathroom.
- Includes tough 2 x 10" cab
- Stereo input / headphone out for silent practice
- Effects loop and direct out
HEAD
- Power output: 100 watts @ 8 ohms
- Preamp: Solid-state
- Power amp: Solid-state
- Tone controls: Bass, mid, treble
- Unbalanced line out
- FX loop
- Dual inputs (0dB & -15dB)
- 1/8" headphone out / line in
- Dimensions ( H x W x D inches): 7 x 12.2 x 10
- Handling weight: 13.8 lbs
CABINET
- 100 watts power handling @ 8 ohms
- 2 x 10" LF drivers
- Frequency response: 57 Hz – 5 kHz
- Sensitivity: 100 dB SPL @ 1w/1m
- Dimensions ( H x W x D inches): 24 x 13 x 11
- Handling weight: 33.2 lbs
Ampeg PF-50T Bass Amplifier Head
$ 999.99 $ 1,459.98
The legendary tone and portability of the all-tube Ampeg Portaflex amplifiers is faithfully reproduced in the PF-50T. This all-tube Portaflex head provides a harmonically rich and studio-worthy 50 watts of pure Ampeg tone to satisfy the most discerning bass player. Featur ing simple user-adjustable bias adjustment for easy tube replacement and pre-amp and transformer balanced direct outs for maximum versatility. Plus, no speaker load is required for silent recording or even use as a dedicated tube DI. Pair it with the PF-112HLF for the ultimate compact all-tube bass rig.
FEATURES
- RMS power output:50W @ 4 or 8 ohms
- Preamp: All-tube [2] x 12AX7
- Power amp: All-tube [1] x 12AU7, [2] x 6L6
- 0db and -15db inputs
- Tone controls: Bass, Mid, Treble
- Mid-tone control: 5-position
- Ultra Hi/Lo boosts
- Input gain control
- Preamp balanced line out
- Pre/Post EQ
- Ground lift
- Transformer balanced line out
- Ground lift
- User adjustable bias control
- Dimensions (H x W x D inches):
- 7.3 x 13.9 x 10.4 in
- 185 x 353 x 264 mm
- Weight: 19.4 lb / 8.8 kg
Ampeg Rocket Bass 108 30W Bass Combo Amp - Black and Silver
$ 199.99 $ 259.98
Main Features
- 30W, 1 channel
- Solid-state amplifier
- 3-band EQ, Super Grit overdrive, Headphone out, auxiliary in
- 1x8 speaker
Lightweight and Powerful
Weighing only 23 lb., it's a cinch to lift the Rocket Bass and carry it from the bedroom to the garage, or wherever you want to play. The solid-state power section is 30 watts, more than enough for practice through the efficient 8" speaker.Super Grit Technology/3-band EQ
Clean tone is great for Sunday morning jam sessions, but when it’s time to kick it up a notch, the Rocket Bass is ready. The Super Grit overdrive provides more punch, and the 3-band EQ allows further sonic sculpting to dial in a variety of bass tones.Practice Anytime
Playing a musical instrument requires a lifetime of practice, but when others are around, it can be difficult. Fortunately, the RB 108 has a headphone output for silent play. The auxiliary input connects to any external audio source, making it possible to jam along with any band.Vintage Style
Ampeg first made its mark in 1960 with the introduction of the groundbreaking Portaflex bass amp. The Rocket Bass 108 fits into the family with its vintage-style diamond checkerboard Tolex covering and silver grille cloth.- 30-watt 1x8 combo
- Vintage styling with modern features
- Ampeg Legacy preamp
- Super Grit Technology (SGT™) overdrive
- 0dB and -15dB inputs
- Auxiliary input and headphone output
- 23 lbs. (10.5 kg)
Ampeg Rocket Bass 110 Bass Combo Amplifier - Black / Silver
$ 279.99 $ 389.98
RB-110
The 50-watt RB-110 is an ideal amp for practicing and playing small venues. Classic 3-band EQ and the new Super Grit Technology™ overdrive make it easy to dial in legendary Ampeg tone. Plus, an auxiliary input lets you play along with external audio, while a headphone output ensures you’ll be able to practice whenever you like without disturbing others. An XLR output provides a professional connection to a P.A. or recorder.
- 50-watt 1x10 combo
- Vintage styling with modern features
- Ampeg Legacy preamp
- Super Grit Technology (SGT™) overdrive
- 0dB and -15dB inputs
- Auxiliary input and headphone output
- XLR direct output
- 22.5 lbs. (10.2 kg)
Ampeg Rocket Bass 115 Bass Amp Combo - Black/ Silver
$ 559.99 $ 727.98
RB-115
The 200-watt RB-115 is an exceptional gigging and recording amplifier with a custom 15" Eminence® speaker. Classic Ampeg 3-band EQ and Ultra Hi/Ultra Lo switches combine with the new Super Grit Technology™ overdrive circuit to deliver legendary Ampeg tone. Additional features include an auxiliary input, a headphone output, an effects loop, an extension speaker output, and an XLR output that provides a professional connection to a P.A. or recorder.
- 200 watts
- 15" Custom Eminence speaker
- Ampeg Legacy preamp with 3-band EQ
- Footswitchable SGT™ overdrive
- Auxiliary input and headphone output
- Effects loop
- Extension speaker and XLR direct outputs
- 34 lbs. (15.45 kg)
Ampeg SGT-DI Pre Amp Pedal
$ 399.99 $ 519.98
SGT-DI
The All-In-One Bass Box
The SGT-DI™ preamp and DI gives modern bassists an entire rig in a single stompbox. It delivers an enhanced Super Grit Technology™ overdrive circuit featuring iconic Ampeg SVT® and B15 voices, versatile 3-band EQ now with sweepable mids, Ultra-Hi and 3-way Ultra-Lo switches, a variable compressor, and an Aux /Headphone section. Plus! Introducing the first IR Loader/Cab Simulator from Ampeg. Choose from three classic factory cabs or up to three cabs of your own by using the free Ampeg IR Loader application. Combining time-tested Ampeg tone with modern capabilities, the SGT-DI demonstrates our commitment to honoring our legacy while also serving the needs of contemporary players.
Part Number: 99-040-4105
Features
- 3-Band EQ with sweepable mids
- SGT circuit with SVT and B15 voicing switch
- Onboard IR Loader/Cab Simulator
- Ultra-Hi and 3-way Ultra-Lo switches
- Variable 10:1 compressor
- Free Ampeg IR Loader application
- Aux/Headphone section
- Balanced XLR and 1/4" line outputs
Ampeg SVT-212AV 600W 2x12 Bass Speaker Cabinet - Black
$ 849.99 $ 1,104.98
Features
- Power handling: 600W RMS at 4ohms
- Speakers: 2x12" Custom Eminence LF drivers; 1" compression driver with 3-way level control
- Optional classic black grille cloth
Ampeg SVT-4Pro Bass Amplifier Head
$ 1,849.99 $ 2,700.98
SVT-4 PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient 3U rackmount design. In the world of high performance bass amps, the Ampeg SVT-4 PRO has what it takes to define your sound.
The Ampeg® SVT® line of pro-level amps is synonymous with power and durability. The SVT-4PRO crystallizes this philosophy, delivering more performance, flexibility, and power than any other amp in its class.
In true SVT tradition, the SVT-4PRO is capable of a huge variety of must-have sounds at high volume over extended periods of time. To achieve this, Ampeg packed a ton of tone-sculpting into its burly 3U chassis, mating the extensive preamp with dual high-output Class AB power amps. In addition to Ampeg’s classic 5-position Midrange control, which allows you to dial in the center frequency of the peaking midrange filter, there’s shelving bass and treble filters, and—if that weren’t enough—nine bands of carefully chosen graphic EQ. You can even use the graphic EQ as a “second channel,” making an alternate sound as easy as a tap on a footswitch.
Thanks to its hybrid tube/solid-state design, the SVT-4PRO delivers signature fat and warm Ampeg Round Sound, plus the entire sonic palette that players of any stripe might need to get the job done.
- 300 watts x 2; 900 watts mono-bridged @ 8 Ohms
- 490 watts x 2; 1,200 watts mono-bridged @ 4 Ohms
- 600 watts x 2 @ 2 ohms
- Defeatable Optocoupler limiters
- 1/4" and Neutrik® speakON® outputs
- Bi-ampable with stereo/bridgeable power amps and variable 24dB/octave crossover
- Onboard compressor with variable ratio (1:1–10:1)
- 9-band graphic EQ
- 39.6 lb (17.9 kg)
Ampeg SVT210AV Bass Cabinet
$ 399.99 $ 519.98
The Ampeg SVT210AV is the portable alternative to a full sized SVT cab. Ideal for bleed-sensitive recording situations where the SVT810-AV can be too loud and live situations where it can be too large, the SVT210AV is designed using Ampeg's legendary Infinite Baffle ™ system for maximum speaker efficiency and true Ampeg tone.
Specs:
- 2x10 Eminence® Custom Designed (sealed cabinet)
- 200 Watts
- 8 Ohms
- 15mm Poplar-ply construction
- 25.9 lb (11.7 kg)
Ampeg V-4B Tube Bass Amplifier Head
$ 1,599.99 $ 2,335.98
The Ampeg V-4B 100W All-Tube Bass Head embodies the legendary tone of the classic V-4B in a portable, modern design perfect for today's players. From the unique chassis suspension system to the vintage rocker switches, the attention to detail is all there. Plus, with a careful selection of modern features like an integrated DI and a wide choice of speaker output options, we've ensured the flexibility and functionality you demand from a modern head. With the 100W V-4B, you get the sought-after tone of a fully-cranked Ampeg tube amp in a design that's less than half the weight of an SVT.
- 100W of all-tube Ampeg bass tone
- Ultra Hi/Lo boost
- 3-band EQ (bass, midrange, treble)
- 3-position mid-range control
Ampeg VB-212 Bass Cabinet
$ 1,099.99 $ 1,539.98
VENTURE VB-212
GO ANYWHERE™
Ampeg Venture® Series amplifiers and cabinets deliver the modern style and features sought by contemporary bassists—continuing a tradition of innovation that stretches back to the dawn of the electric bass. The Venture VB-212 bass cab weighs 40 pounds and handles 500 watts RMS/1000 watts Program power (8Ω)—making it perfect for modern gigging bassists on the go. The VB-212 features two custom-voiced Lavoce® neodymium woofers and a variable high-frequency driver. This stylish front-ported cab is ruggedly constructed and covered in carbon fiber-style Tolex, so it will hold up gig after gig, while at the same being one of the lightest 2x12 bass enclosures currently available. An optional Portaflex®-style grille assembly offers an aesthetic alternative. Use as a large-format single cabinet or combined with an additional VB-212 to build your ultimate stage rig. Pair with a Venture head and add an optional padded cover.
FEATURES |
|
● 500 watts RMS/1000 watts Program @ 8Ω ● Ultra-lightweight yet rugged construction ● Carbon fiber-style Tolex covering and modern Ampeg logo ● Custom Lavoce neodymium woofers and high-frequency driver |
● Variable high-frequency attenuator ● Neutrik® speakON® inputs ● 40 lbs. |
ART X-11 Midi Master Controller USED
$ 80.00
90's Midi Controller. Sold as is without cables.
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2026 Huber Breese Music. Powered by Shopify
