Products
Fender PR-180E Resonator Guitar - Aged Cognac Burst
$ 549.99 $ 735.66
From Delta Blues to lap steel slide, the PR-180E round-neck resonator offers excellent versatility for traditional and modern music styles, with exemplary acoustic and amplified tone. The all-mahogany construction creates the perfect sonic balance between warmth and clarity for fingerstyle play, while the spider resonating cone provides superior sustain for the quintessential bluegrass sound. Long-favored by top resonator artists, the PR-180E is equipped with a Fishman® Nashville pickup system for the most accurate representation of its natural acoustic voice.
Other features include dual F-hole soundholes, a comfortable neck profile, ovangkol fingerboard with snowflake inlays, a genuine bone nut, and hardshell case.
- Serial Number: CSSF22006768
- Weight: 5.8lbs
- Model #: 0970392337
Product Specs
General
- Paramount
- Right-Hand
- Aged Cognac Burst
-
CN
Neck
- Satin
- Small "V"
- 15.75" (400 mm)
- Walnut
- Snowflake
- Dual-Action
- 4 mm Hex
- Bone
- 1.75" (44.45 mm)
- Bone
Body
- Laminated Mahogany Top with Arched Laminated Mahogany Back and Sides
- Satin
- Resonator
-
Aged White
- Laminated Mahogany Top with Arched Laminated Mahogany Back and Sides
- Internal Sound-Well
- Dual F-Holes
Hardware
- Spider - Fishman® Nashville
- Trapeze Tailpiece
- Spider
-
- Nickel Open-Back
- Fender® 60L Phosphor Bronze (.012-.052 Gauges), PN 0730060403
- Vintage-Style
Electronics
- Fishman® Nashville Series Resophonic Pickup
Measurements
- 2.4mm
- 25" (635 mm)
Fender Pre-Wired Eric Johnson Strat Pickguard - Parchment 8 Hole PG
$ 329.99 $ 360.00
Customize your tone with the Pre-Wired Stratocaster pickguards. Made with premium components in the same factory as our iconic guitars, this drop-in pickguard is easy to install. Simply remove your old guard, solder the output jack and ground wires, screw in the new guard and you're ready to rock with pure Fender sound.
With slightly hotter output than typical vintage pickups and a powerful combination of magnets, these sonically potent and highly dynamic pickups produce the perfect balance of clean, dirty rhythm and lead tones to satisfy all level of players, through any amplifier. The neck pickup is based on a '54 Strat pickup with oversized alnico 3 magnets. The middle pickup, based on a '63 Strat pickup, uses specially treated alnico magnets and is reverse wound to cancel hum when used with the neck or bridge pickup. The bridge pickup uses alnico 5 magnets and is specially voiced to be hotter without sacrificing that sweet top end sparkle.
General
- Pre-Wired Pickguards
- Right-Hand
- 1-Ply Parchment
- Stratocaster®
- US
Hardware
- 1-Ply Parchment
- PICKGUARD PLY: 1-Ply
Electronics
Fender Pre-Wired Strat Pickguard Eric Johnson Signautre - Parchment 11 Hole PG
$ 329.99 $ 360.00
Customize your tone with the Pre-Wired Stratocaster pickguards. Made with premium components in the same factory as our iconic guitars, this drop-in pickguard is easy to install. Simply remove your old guard, solder the output jack and ground wires, screw in the new guard and you're ready to rock with pure Fender sound.
With slightly hotter output than typical vintage pickups and a powerful combination of magnets, these sonically potent and highly dynamic pickups produce the perfect balance of clean, dirty rhythm and lead tones to satisfy all level of players, through any amplifier. The neck pickup is based on a '54 Strat pickup with oversized alnico 3 magnets. The middle pickup, based on a '63 Strat pickup, uses specially treated alnico magnets and is reverse wound to cancel hum when used with the neck or bridge pickup. The bridge pickup uses alnico 5 magnets and is specially voiced to be hotter without sacrificing that sweet top end sparkle.
Specs
Hardware
- 3-Ply Parchment
- 3-Ply
- Aged White
- Aged White
- Aged White
- Chrome
Electronics
- Custom Eric Johnson Signature Stratocaster® Bridge Pickup
- Custom Eric Johnson Signature Stratocaster® RWRP Middle Pickup
- Custom Eric Johnson Signature Stratocaster® Neck Pickup
- SSS
- Cloth-covered
- Neck and Middle: Alnico 3, Bridge: Alnico 5
- Formvar-coated
- Staggered
- Fiber
- Master Volume, Tone 1. (Neck Pickup), Tone 2. (Bridge Pickup)
- Vintage
- Neck: 5.8-6k, Middle: 6.3-6.5k, Bridge: 6.7-6.9k
- Neck/Middle: 2.5-2.7 Henries, Bridge: 2.9-3.1 Henries
- CTS 250K
Measurements
- DIMENSIONS: 2.20x10.70x13.40 IN
Fender Pro Junior IV Guitar Amplifier - Lacquered Tweed
$ 649.99 $ 868.00
Long-revered by players of all stripes, the 15-watt Pro Junior IV adds a modified volume circuit and a classic tweed appearance to this workhorse amplifier. A compact and straightforward tone machine, this amp is ideal for performing guitarists who need great tone and remarkably touch-sensitive dynamic response.
- Model #: 2231300000
Product Specs
General
- Amplifier Type: Tube
- Color: Lacquered Tweed
- Country Of Origin: MX
- Series: Hot Rod
Electronics
- Channels: One
- Connection Type: Non-IEC
- Control Panel: Volume, Tone
- Controls: Volume, Tone
- Effects Loop: NA
- Inputs: One - 1/4"
- Voltage: 120V
- Wattage: 15 Watts
Hardware
- Amplifier Covering: Lacquered Tweed
- Amplifier Jewel: Red LED
- Cabinet Material: 3/4" Particle Board
- Control Knobs: Chicken-Head Style Pointer - Black
- Front Panel: Chrome
- Grille Cloth: 50s Style
- Handle: Vintage Leather Strap
Speakers
- Speakers: One - 10" Jensen® P10R Alnico
- Total Impedance: 8 ohms
Tubes
- Power Tubes: 2 x EL84
- Preamp Tubes: 2 x 12AX7
- Rectifier: Solid State
Miscellaneous
- Power Cable: Non-IEC
Accessories
- Footswitch: NA
Measurements
- Power Tubes: 2 x EL84
- Product Depth: 8.75" (22.22 cm)
- Product Height: 14.5" (36.8 cm)
- Product Width: 15.25" (38.73 cm)
Fender Pro Junior IV SE Combo Guitar Amplifier - Black
$ 549.99 $ 736.00
Long-revered by players of all stripes, the Fender Pro Junior amp is a compact and straightforward 15-watt all-tube tone machine. It’s ideal for guitarists who enjoy touch-sensitive dynamic response and great clean-to-mean tones with an uncluttered feature set.
The new Limited Edition Pro Junior IV SE is a simplified alternative to our core Lacquered Tweed model. It comes equipped with a Fender Special Design speaker for tight, well-balanced output with plenty of high-end sparkle. Its stage- and studio-ready style features black vinyl covering, aged silver grille cloth, and a chrome control panel with red jewel light, giving it the unmistakable look and vibe that’s classic Fender. Fun, flexible and pedal-friendly, the Pro Junior IV SE is an ideal addition to any electric guitarist’s amp collection.
- Model #: 2231300010
Product Specs
General
- Amplifier Type: Tube
- Color: Black
- Country Of Origin: MX
- Series: Hot Rod
Electronics
- Channels: One
-
Control Panel: Volume, Tone
- Controls: Volume, Tone
-
Inputs: One - 1/4"
- Voltage: 120V
- Wattage: 15 Watts
Hardware
-
Amplifier Jewel: Red LED
- Cabinet Material: 3/4" Particle Board
- Control Knobs: Black Plastic
- Front Panel: Chrome
- Grille Cloth: Aged Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
Speakers
- Speakers: One - 10" Fender® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: 2 x EL84
- Preamp Tubes: 2 x 12AX7
- Rectifier: Solid State
Accessories
- Footswitch: NA
Measurements
- Power Tubes: 2 x EL84
- Product Depth: 8.75" (22.22 cm)
- Product Height: 14.5" (36.8 cm)
- Product Width: 15.25" (38.73 cm)
Fender Professional Large Pedal Board
$ 269.99 $ 324.00
Surprisingly simple and remarkably versatile – the Fender® Professional Pedal Board delivers world-class performance and utility. The low-profile precision-machined anodized-aluminum chassis is lightweight and strong enough to stand up to the rigors of the road, while the thoughtfully designed cable routing and management system allows you to keep things neat and tidy, even if your board is overflowing with pedals. Under the hood, a universal mounting bracket fits most popular pedal power-supplies – and is a perfect match for the Fender Engine Room series. The included soft case with storage pocket and cable ties will keep your pedals and accessories safe on the way to the gig, studio or any other destination.
- Model #: 0991084003
Dimensions –
Small - W 18” x D 12.8” x H 2.95”
Medium - W 24” x D 12.8” x H 2.95”
Large - W 32” x D 16” x H 2.95”
Product Specs
General
- Series: Pedal Board
- Color: Anodized Aluminum
- Material: Anodized Aluminum
- Country Of Origin: CN
Miscellaneous
- Case Pack Qty: 3
- Size: L
Measurements
- Dimensions: 9.00x19.00x34.50 IN
Fender Professional Small Pedal Board
$ 169.99 $ 204.00
Surprisingly simple and remarkably versatile – the Fender® Professional Pedal Board delivers world-class performance and utility. The low-profile precision-machined anodized-aluminum chassis is lightweight and strong enough to stand up to the rigors of the road, while the thoughtfully designed cable routing and management system allows you to keep things neat and tidy, even if your board is overflowing with pedals. Under the hood, a universal mounting bracket fits most popular pedal power-supplies – and is a perfect match for the Fender Engine Room series. The included soft case with storage pocket and cable ties will keep your pedals and accessories safe on the way to the gig, studio or any other destination.
- Model #: 0991084001
Dimensions –
Small - W 18” x D 12.8” x H 2.95”
Medium - W 24” x D 12.8” x H 2.95”
Large - W 32” x D 16” x H 2.95”
Product Specs
General
- Series: Pedal Board
- Color: Anodized Aluminum
- Material: Anodized Aluminum
- Country Of Origin: CN
Miscellaneous
- Case Pack Qty: 3
- Size: S
Measurements
- Dimensions: 8.50x15.50x20.50 IN
Fender PS-220E Parlor Acoustic Guitar - 3 Color Vintage Sunburst
Sold Out $ 1,110.12
The Paramount PS-220E combines state-of-the-art craftsmanship with vintage-inspired appointments, delivering the best of both worlds. Built with the choice of a solid spruce or solid mahogany top paired with solid mahogany back and sides, the PS-220E features an offset X-bracing pattern that has been carefully refined to optimize resonance and tone. A Fender and Fishman®-designed pickup amplifies the tight, articulate tone of the PS-220E’s newly designed parlor body shape, while the soundhole-mounted controls preserve the vintage aesthetics. Under the top, a body-sensing pickup enhances the soundboard's vibrations which can then be blended with the undersaddle Sonicore pickup.
Updated cosmetics include snowflake-shaped pearloid fingerboard inlays, feathered purfling, rosette, and backstrip, and a Black or Tiger Stripe pickguard. The PS-220E also features an ovangkol bridge and 14-fret fingerboard, slim-taper mahogany neck, bone nut and saddle, and comes with a hardshell case.
- Serial Number: CC220120323
- Weight: 4.0lbs
- Model #: 0970320303
Product Specs
General
- Color: 3 Color Vintage Sunburst
- Country Of Origin: CN
- Orientation: Right-Hand
- Series: Paramount
Neck
- Fingerboard Material: Ovangkol
- Fingerboard Radius: 15.75" (400 mm)
- Headstock Binding: 3-Ply W/B/W
- Neck Finish: Satin Urethane
- Neck Material: Mahogany
- Neck Shape: "C" Shape
- Number of Frets: 20
- Nut Material: Bone
- Nut Width: 1.69" (43 mm)
- Position Inlays: Snowflake
- Side Dots: Black
- String Nut: Bone
- Truss Rod: Dual-Action
Body
- Body: Solid Mahogany
- Body Finish: Satin Urethane
- Body Shape: Parlor
- Body Top: Solid Mahogany
- Body Binding: Aged White with Feathered Checkered Purfling
- Body Back: Solid Mahogany
- Body Sides: Solid Mahogany
- Body Material: Solid Mahogany
- Rosette: Feathered Checkered
Hardware
- Bridge: Ovangkol
- Bridge Pins: Ebony with Mother-of-Pearl Dots
- Hardware Finish: Nickel-Plated
- Pickguard: 1-Ply Black
- Strings: Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
- Tuning Machines: Nickel Open-Back
Electronics
- Controls: Volume, Blend (Body Pickup, Piezo)
- Special Electronics: Fender®/Fishman® Sonitone™ Plus Soundhole Pickup System
Accessories
- Truss Rod Wrench: 4 mm Hex (Allen)
Measurements
- Fret Size: 2mm
- Scale Length: 25.3" (643 mm)
Fender Redondo Mini Acoustic Guitar - Sunburst
$ 199.99 $ 260.00
The Redondo Mini packs a big punch into a smaller sized acoustic guitar. Featuring a spruce top paired with mahogany back and sides, this guitar has a 22 ¾” scale length, but delivers the tone of a full-sized guitar. Like all models in the California Series, the Redondo Mini features a 6-in-line Strat headstock inspired by Fender’s electric legacy.
Other premium features include a walnut fingerboard and bridge, Nubone nut and saddle.Whether you’re a young, aspiring player looking for a smaller instrument, or simply looking for a top-notch guitar that’s easy to travel with, the Redondo Mini has you covered.
- Serial Number: IWA2157294
- Weight: 3.0lbs
- Model #: 0970710103
Product Specs
General
- Color: Sunburst
- Country Of Origin: ID
- Orientation: Right-Hand
- Series: California
Neck
- Fingerboard Material: Walnut
- Fingerboard Radius: 15.75" (400 mm)
- Headstock: Stratocaster®
- Neck Finish: Satin Polyurethane
- Neck Material: Nato
- Neck Shape: "C" Shape
- Number of Frets: 18
- Nut Material: Nu-Bone™
- Nut Width: 1.69" (43 mm)
- Position Inlays: White Dot
- String Nut: Nu-Bone™
- Truss Rod: Dual-Action
Body
- Body: Mahogany
- Body Back: Mahogany
- Body Binding: Multiple
- Body Finish: Satin
- Body Material: Mahogany
- Body Shape: Redondo Mini
- Body Sides: Mahogany
- Body Top: Spruce
- Bracing: Scalloped X
- Rosette: 2-Ring B/W/B
Hardware
- Bridge: Walnut
- Bridge Pins: White with Black Dots
- Hardware Finish: Nickel
- Pickguard: None
- Strap Buttons: Factory Mounted Forward Strap Button with Internal Block Reinforcement
- Strings: Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
- Tuning Machines: Vintage-Style with Aged White Plastic Buttons
Electronics
- Controls: NA
Accessories
- Included Accessories: Gig Bag
Measurements
- Fret Size: 2.4mm
- Scale Length: 22.75” (578 mm)
Fender Redondo Player Acoustic Guitar - Candy Apple Red
$ 449.99 $ 699.99
Crafted with an X-braced solid spruce top and sapele back and sides, the dreadnought body of the Redondo Player produces a deep, robust voice with exceptional projection and volume for a wide variety of musical settings. The nato neck is designed with an easy-to-play slim “C”-shaped profile, a 25.5" scale length, and a tilt-back 6-in-line headstock for a distinctive look born from Fender’s electric guitar DNA. Other notable details include vintage-style tuning machines for smooth, accurate tuning, a GraphTech® NuBone® nut and saddle for detailed harmonic character. With elegantly integrated controls for a sleek, modern look, the onboard Fishman® Flex preamp system allows faithful reproduction of the guitar’s natural sound when plugged into an amplifier or recording device.
Bold, eye-catching and unique, California Series instruments make no compromises, balancing effortless playability, superior sound, and standout style for those who aspire to play something different.
- Serial Number: IWA2308528
- Weight: 4.6lbs
Product Specs
- Model Name: Redondo Player, Walnut Fingerboard, White Pickguard, Candy Apple Red
- Model #: 0970713209
- Series: California
- Country Of Origin: ID
- Color: Candy Apple Red
- Body: Solid Spruce Top with Laminated Sapele Back and Sides
- Body Finish: Satin
- Body Shape: Redondo
- Neck Material: Nato
- Neck Finish: Satin Urethane
- Neck Shape: Slim "C"
- Scale Length: 25.6" (650 mm)
- Fingerboard: Walnut
- Fingerboard Radius: 15.75" (400 mm)
- Number of Frets: 20
- String Nut: Graph Tech® NuBone™
- Nut Width: 1.69" (43 mm)
- Position Inlays: White Dot
- Electronics: Fishman Flex
- Controls: Volume, Push Tone Knob for Phase Control
- Bridge: Modern Viking
- Hardware Finish: Chrome
- Tuning Machines: Vintage Style
- Pickguard: 3-Ply White
- Strings: Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
Fender Redondo Player Acoustic Guitar - Lake Placid Blue
$ 449.99 $ 500.00
Inspired by the iconic designs of Fender electric guitars, California Player acoustics evoke the west coast spirit of adventure and freedom, inviting musicians to explore their individual creativity and disrupt the status quo.
Crafted with an X-braced solid spruce top and sapele back and sides, the dreadnought body of the Redondo Player produces a deep, robust voice with exceptional projection and volume for a wide variety of musical settings. The nato neck is designed with an easy-to-play slim "C"-shaped profile, a 25.5" scale length, and a tilt-back 6-in-line headstock for a distinctive look born from Fender's electric guitar DNA. Other notable details include vintage-style tuning machines for smooth, accurate tuning, a GraphTech® NuBone® nut and saddle for detailed harmonic character. With elegantly integrated controls for a sleek, modern look, the onboard Fishman® Flex preamp system allows faithful reproduction of the guitar's natural sound when plugged into an amplifier or recording device.
Bold, eye-catching and unique, California Series instruments make no compromises, balancing effortless playability, superior sound, and standout style for those who aspire to play something different.
Serial Number: IWA2342171
Weight: 4.8 lbs
Specs
Neck
- Tilt-Back Stratocaster®
- Nato
- Satin Urethane
- Slim "C"
- 15.75" (400 mm)
- Walnut
- White Dot
- 20
- Modern Heel Adjust
- 4 mm Hex
- Graph Tech® NuBone™
- 1.69" (43 mm)
- Graph Tech® NuBone™
Body
- Solid Spruce Top with Laminated Sapele Back and Sides
- Satin
- Redondo
- Solid Sitka Spruce
- Aged White
- Sapele
- Sapele
- Redondo
- Solid Spruce Top with Laminated Sapele Back and Sides
- Yes
- Scalloped X
- 10.83" (275 mm)
- 2-Ring B/W/B
- 100mm Diameter Soundhole
Hardware
- Modern Viking
- Aged White with Black Dots
- 3-Ply Tortoiseshell
- Nickel
- Vintage-Style
- Fender® Dura-Tone® 880L Coated 80/20 (.012-.052 Gauges), PN 0730880303
- Vintage-Style
Electronics
- Volume, Tone, Push Tone Knob For Phase Control
- Fishman® Flex
Fender Reflecting Pool Delay and Reverb pedal
$ 349.99 $ 419.98
The relationship between time-based effects, like delay and reverb, is critical to operating them correctly. The Reflecting Pool® Delay/Reverb pedal combines these two classic effects into one comprehensive chassis, making it easy to integrate into any pedalboard. Utilizing cutting-edge DSP for rich and complex algorithms, Reflecting Pool® faithfully recreates classic sounds, while also conjuring otherworldly new ones. Type, Variation and Quality controls make it easy to precisely shape your sound, the Time toggle adds rhythmic subdivisions, and the Tap Tempo footswitch makes sure everything stays in time.
Designed by our in-house team of experts, the Reflecting Pool® Delay/Reverb is an all-original Fender circuit. The chassis is crafted from lightweight, durable anodized aluminum, and the Amp Jewel LED gives your pedalboard the classic Fender look. The switchable LED-backlit knobs show your control settings on a dark stage at a glance.
- Model #: 0234546000
Product Specs
General
- Country Of Origin: CN
- Material: Anodized Aluminum
- Series: Fender® Pedals
Electronics
- Power Consumption: 250mA
- Power Requirements: AC Adaptor-9V DC center negative (not included)
Miscellaneous
- Case Pack Qty: 12
Fender Rincon Tenor Ukulele - Aged Cognac Burst
$ 219.99 $ 252.00
Named after one of the most famous surf spots in Southern California, Fender’s Rincon model has a rich, deep voice and is packed with unique style. Constructed completely from ovangkol, this tenor-sized uke provides enhanced resonance and volume, singing with full-bodied chime. The Rincon comes equipped with Fender®-Designed electronics for players who want to bring their music from the beach to the stage.
Other notable features include a no-tie bridge for quick, easy string changes, a bone nut and saddle for superior intonation. An open pore satin finish, abalone rosette, vintage-style closed-back tuning machines and a 4-in-line Strat® headstock round out this Fender’s unmistakably classic look.
- Serial Number: CRKF22000145
- Weight: 1.4 lbs
- Model #: 0970452137
Product Specs
General
- California Coast
- Right-Hand
- Aged Cognac Burst
- CN
Neck
- Nato
- Satin Urethane
- Flat
- Walnut
- White Dot
- 19
- Bone
- 1.375" (35 mm)
- Bone
Body
- Ovangkol
- Open Pore Satin
- Tenor Ukulele
- Ovangkol
- Ovangkol
- Ovangkol
- Ovangkol
- Fan
- Abalone
Hardware
- Walnut, Pull-through
- N/A
- Nickel
- Sealed Nickel
- Standard Tenor Uke
Electronics
- Volume, Tone, Integrated Electronic Tuner with On/Off Switch, Low Battery Indicator Light
- Fender® FE-U01 Preamp
Measurements
- 1.5mm
- 17" (432 mm)
Fender Rincon V2 Tenor Ukulele - Natural
Sold Out $ 242.00
Packed with elegant style and top-notch features, the tenor-sized Rincon Ukulele has a rich, deep voice that's uniquely inspiring. "Electrifying" isn't a word one usually associates with ukuleles, but for players who want to plug in and get loud, the Rincon features an onboard Fishman® Kula preamp.
Crafted from ovangkol, with a solid top for enhanced volume, this ukulele sings with full-bodied chime while boasting a natural appearance. A pull-through bridge, bone nut and saddle, and eye-catching abalone rosette round out the modern features. The Rincon V2 now features a 4-in-line Tele® headstock with vintage-style closed-back tuning machines, for that unmistakably classic Fender look.
Whether you're counting sets on the coastline or playing your heart out on stage, your Rincon Ukulele is ready to help you make waves.
- Serial Number: CAU2200094
- Weight: 1.8 lbs
Product Specs
- Model Name: Rincon Tenor Ukulele V2, Ovangkol Fingerboard, Natural
- Model #: 0971652121
- Series: California Coast Ukuleles
- Country Of Origin: CN
- Color: Natural
- Body: Ovangkol
- Body Finish: Satin
- Body Shape: Tenor Ukulele
- Neck Material: Nato
- Neck Finish: Satin Urethane
- Scale Length: 17" (432 mm)
- Fingerboard: Ovangkol
- Fingerboard Radius: Flat
- Number of Frets: 19
- Frets Size: 1.5mm
- String Nut: Bone
- Nut Width: 1.375" (35 mm)
- Position Inlays: White Dot
- Controls: Volume, Treble, Mid, Bass
- Bridge: Walnut pull-through
- Hardware Finish: Chrome
- Tuning Machines: Sealed Nickel
- Pickguard: None
- Strings: Standard Tenor Uke
Fender Roasted Maple "C"/21 Narrow Tall/ 9.5" Telecaster Neck
Sold Out $ 420.00
There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice.
This genuine Fender Precision Bass neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring a comfortable "Modern C"-shaped profile and 9.5"-radius maple fingerboard with 20 medium-jumbo frets, this neck was designed for pure playability. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. The perfect way to give your P Bass® authentic Fender feel, this replacement neck even sports our famous “spaghetti” logo on the headstock.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Product Specs
General
- Color: Natural
- Country Of Origin: MX
- Instrument Type: Telecaster®
- Orientation: Right-Hand
- Series: Necks
Neck
- Fingerboard Material: Maple
- Fingerboard Radius: 9.5" (241 mm)
- Neck Finish: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
- Neck Material: Roasted Maple
- Neck Mounting: 4-Bolt
- Neck Shape: Modern "C"
- Neck Thickness: 1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
- Number of Frets: 21
- Nut Material: Synthetic Bone
- Nut Width: 1.650" (42 mm)
- Position Inlays: Black Dot
- String Nut: Synthetic Bone
- Truss Rod: Standard
- Truss Rod Nut: 3/16" Hex Adjustment
Hardware
- Tuner Mounting Config: Dual Guide Pin
Fender Roasted Maple Jazz Bass Neck 20 Medium Jumbo Frets/9.5"/Maple/C Shape
$ 399.99 $ 480.00
There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice.
This genuine Fender Jazz Bass neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring a comfortable "Modern C"-shaped profile and 9.5"-radius maple fingerboard with 20 medium-jumbo frets, this neck was designed for pure playability. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. The perfect way to give your J Bass® authentic Fender feel, this replacement neck even sports our famous “spaghetti” logo on the headstock.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Product Specs
- Model Name: Roasted Maple Jazz Bass Neck, 20 Medium Jumbo Frets, 9.5", Maple, C Shape
- Model #: 0990702920
- Series: Necks
- Country Of Origin: MX
- Color: Natural
- Dimensions: 3.40x8.20x36.90 IN
- Weight: 3.35 LB
- Commodity: 9209940000
Fender Roasted Maple Precision Bass Neck 20 Medium Jumbo Frets/9.5"/Maple/C Shape
Sold Out $ 480.00
There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice.
This genuine Fender Precision Bass neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring a comfortable "Modern C"-shaped profile and 9.5"-radius maple fingerboard with 20 medium-jumbo frets, this neck was designed for pure playability. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. The perfect way to give your P Bass® authentic Fender feel, this replacement neck even sports our famous “spaghetti” logo on the headstock.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Product Specs
- Model Name: Roasted Maple Precision Bass Neck, 20 Medium Jumbo Frets, 9.5", Maple, C Shape
- Model #: 0990802920
- Series: Necks
- Country Of Origin: MX
- Color: Natural
- Dimensions: 3.40x8.20x36.90 IN
- Weight: 3.35 LB
- Commodity: 9209940000
Fender Roller Bag - Black
$ 199.99 $ 230.00
No matter your destination, the Fender Roller Bag makes your travels efficient with plenty of rock 'n' roll spirit. Use the extendable handle and convenient wheels to transport your favorite gear across town or across the country, and use the additional pockets for extra storage. Add on the easy-to-attach Fender Utility Pack, and you'll never run out of room.
Product Specs
- Color: Black
- Commodity Code: 4202121900
- Country Of Origin: CN
- Model #: 9188894506
- Model Name: Fender® Roller Bag, Black
- Series: Fender
Fender Rumble 100 (V3) Bass Amplifier - Black/Silver
$ 329.99 $ 427.26
For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.
The stylish Rumble 100 combo pumps 100 watts of pure Fender bass muscle and finesse. Lighter and louder than ever, it's built with great features including classic Fender styling, 12" Eminence® speaker, overdrive circuit, versatile three-button voicing and more. A must-have combo for any bassist.
- Model #: 2370400000
Product Specs
General
- Amplifier Type: Class-D
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
- Connection Type: IEC
- Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Effects Loop: 1/4" (Send/Return)
- Inputs: One - 1/4"
- Line Out: One - (XLR with Ground Lift)
- Voltage: 120V
- Wattage: 100 Watts at 8 Ohms
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: Lightweight Plywood
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Speakers
- Speakers: One - 12" Eminence® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Miscellaneous
- Power Cable: IEC
Accessories
- Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)
Measurements
- Power Tubes: NA
- Product Depth: 14" (35.56 cm)
- Product Height: 18.5" (47.0 cm)
- Product Width: 16.5" (41.91 cm)
Fender Rumble 115 (V3) Bass Amplifier - Black/Silver
$ 399.99 $ 532.00
- Model #: 2370900000
Product Specs
General
- Series: Rumble™
- Color: Black and Silver
- Amplifier Type: Speaker Enclosure
- Country Of Origin: ID
- Platform: Rumble
Electronics
- Inputs: NA
- Power Handling: 600 watts program (300 watts continuous)
Hardware
- Amplifier Covering: Black Textured Vinyl
- Cabinet Material: Lightweight Plywood
- Grille Cloth: Silver
- Handle: Recessed Side-Mounted Steel Bar (2)
- Casters: Pop-out Casters Included
- Speaker Jack: One 1/4", One Speakon
Speakers
- Speakers: One - 15" Eminence®-Designed Ceramic Magnet Speaker
- Total Impedance: 8 ohms
Measurements
- Product Depth: 14.5" (36.8 cm)
- Product Height: 20.75" (52.7 cm)
- Product Width: 23" (58.42 cm)
Fender Rumble 15 (V3) Bass Amplifier - Black/Silver
$ 89.99 $ 135.00
- Model #: 2370100000
Product Specs
General
- Amplifier Type: Solid State
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One
- Connection Type: IEC
- Control Panel: Volume, Bass, Middle, Treble
- Controls: Volume, Bass, Middle, Treble
- Effects Loop: NA
- Inputs: One - 1/4"
- Line Out: NA
- Voltage: 120V
- Wattage: 15 Watts at 8 ohms
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: NA
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Miscellaneous
- Power Cable: IEC
Speakers
- Speakers: One - 8" Fender® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Accessories
- Footswitch: NA
Measurements
- Power Tubes: NA
- Product Depth: 8" (20.3 cm)
- Product Height: 14.96" (38 cm)
- Product Width: 14.96" (38 cm)
Fender Rumble 200 (V3) Bass Amplifier - Black/Silver
$ 579.99 $ 752.00
For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.
On sight alone, you might not believe that the stylish diminutive Rumble 200 combo actually pumps 200 watts of pure bass muscle and finesse, but it does exactly that. Lighter and louder than ever, it's built with great features including classic Fender styling, 15" Eminence® speaker and compression horn, overdrive circuit, versatile three-button voicing and more.
- Model #: 2370500000
Product Specs
General
- Amplifier Type: Class-D
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
- Connection Type: IEC
- Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Effects Loop: 1/4" (Send/Return)
- Inputs: One - 1/4"
- Line Out: One - (XLR with Ground Lift)
- Voltage: 120V
- Wattage: 200 Watts at 4 ohms (with Extension Cabinet), 140 Watts at 8 ohms (Internal)
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: Lightweight Plywood
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Speakers
- Speakers: One - 15" Eminence®-Designed Ceramic Magnet Speaker
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Miscellaneous
- Power Cable: IEC
Accessories
- Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)
Measurements
- Power Tubes: NA
- Product Depth: 14" (35.56 cm)
- Product Height: 23" (58.42 cm)
- Product Width: 19" (48.3 cm)
Fender Rumble 210 Bass Amplifier Cabinet - Black/Silver
$ 499.99 $ 662.00
- Model #: 2380100000
Product Specs
General
- Amplifier Type: Speaker Enclosure
- Color: Black and Silver
- Country Of Origin: CN
- Platform: Rumble
- Series: Rumble™
Electronics
- Inputs: NA
- Power Handling: 700 Watts (Program), 350 Watts (Continous) Handling Capability
Hardware
- Amplifier Covering: Black Textured Vinyl
- Cabinet Material: Lightweight Plywood
- Grille Cloth: Silver
- Handle: Recessed Side-Mounted Steel Bar (2)
- Speaker Jack: One 1/4", One Speakon
Speakers
- Speakers: Two - 10" Eminence® Ceramic Magnet
- Total Impedance: 8 ohms
Measurements
- Product Depth: 14" (35.56 cm)
- Product Height: 23" (58.42 cm)
- Product Width: 19" (48.3 cm)
Fender Rumble 25 (V3) Bass Amplifier - Black/Silver
$ 129.99 $ 182.00
- Model #: 2370200000
Product Specs
General
- Amplifier Type: Solid State
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One - (with Selectable Overdrive and Contour)
- Connection Type: IEC
- Control Panel: Volume, Overdrive On/Off, Bass, Contour On/Off, Mid, Treble
- Controls: Volume, Overdrive On/Off, Bass, Contour On/Off, Mid, Treble
- Effects Loop: NA
- Inputs: One - 1/4"
- Line Out: NA
- Voltage: 120V
- Wattage: 25 Watts at 8 ohms
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: NA
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Speakers
- Speakers: One - 8" Fender® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Miscellaneous
- Power Cable: IEC
Accessories
- Footswitch: NA
Measurements
- Power Tubes: NA
- Product Depth: 11" (27.94 cm)
- Product Height: 15.25" (38.73 cm)
- Product Width: 15.25" (38.73 cm)
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2024 Huber Breese Music. Powered by Shopify
