PRS Sonzera Series 20W 1x12 Combo - Black

Sold Out

The Sonzera 20 is a moderately powered 20-watt combo amplifier with two independently controlled, footswitchable channels designed for maximum versatility. The clean channel delivers full, 3D tones reminiscent of American mid-1960’s amplifiers. The gain channel is related to the clean channel circuit-wise, so that it can be set up to act as a boosted clean channel or manipulated to make the channels sound like two completely different amps (the gain channel can be set from slight to very heavy distortion by simply using the drive and level controls). The bright switch on the gain channel has been carefully tailored to deliver familiar high-end snap and is particularly effective on the low strings, neck pickup settings, and with singlecoils, while the low-end response of the gain channel is full, tight, and clear.

Both channels on the Sonzera are designed to maximize note clarity and definition. The global presence control and the tone stacks allow players to dial in a variety of tones from bell-like chime to warmer, thicker tones. The Sonzera 20 Combo also features global spring reverb control that is designed to enhance notes without clouding them. The reverb can be turned on and off via the footswitch. The addition of a built-in effects loop allows players to use all their time-based effects with ease without negatively impacting the overall tone of the amp.

With robust construction, a wide range of tones, and steadfast controllability, the Sonzera 20 Combo is a solid gig- and studio- worthy amplifier.

Paul Reed Smith Sonzera Series 20 Watt 1x12 Tube Combo Amplifier - 108452::ST--: Features:

GENERAL

Available Configurations: Combo

TUBES

Power Tubes: (2) 5881 or6L6WGC-STR Short Bottle
Preamp Tubes: (4) 12AX7 / ECC83

ELECTRONICS

Wattage: 20

PREAMP TUBE POSITIONS & FUNCTIONS

V1: Common Input Gain Stage
V2: Gain Channel
V3: Reverb
V4: Phase Inverter

FRONT PANEL CONTROLS

Global Controls: Channel Select Switch, Reverb, Presence

BACK PANEL FEATURES

Inlet: Fused Power Inlet (IEC)
Effects Loop: Loop Return, Loop Send
Bias: Adjustable with Monitoring Jacks
Extension Speaker Jacks: 5
Ohm Switching: (2) 4 ohms & (2) 8 ohms parallel, (1) 16 ohms
Channels: Gain & Clean

HARDWARE

Cabinet Material/Contruction: Plywood
Covering: Textured Black Vinyl
Grill Cloth: Salt and Pepper
Piping: Silver

MEASUREMENTS

Amp Width: 19.5"
Amp Depth: 10.5"
Amp Height: 18"
Amp Weight: 42 lbs.

ACCESSORIES

Included Accessories: 2-Button Footswitch (Channel Gain/Clean, Reverb On/Off)

View full product details »

PRS Special Semi-Hollow 22 10-Top Electric Guitar - Black Gold

PRS

$ 5,840.00

Explore Your Sound

The PRS Special Semi-Hollow offers players a versatile hum/”single”/hum configuration with two PRS McCarty III humbuckers and a PRS Narrowfield middle pickup.

McCarty III pickups were spec’d by Paul Reed Smith and the PRS New Products Engineering team. From our own hands-on research into coveted vintage pickup models to advancements in signal analyzation and “tuning” technology, these pickups incorporate every detail of pickup knowledge PRS has gained in recent years of R&D. PRS McCarty III pickups are vintage-inspired humbuckers that bring a vocal clarity to their full, warm tone. PRS Narrowfield pickup in the middle position delivers the bite of a single coil, so it cuts through the mix with plenty of clarity and punch – but without the hum.

Paired with a 5-way blade switch and two mini-toggles that tap the McCarty III humbuckers, this guitar can handle myriad sounds and styles (with twelve pickup combinations in total). Roll back the tone control for added growl, turn it up for some shimmer, and have fun exploring this versatile tonal palette. The volume level between the humbucking and single-coil settings remains very even, and the semi-hollow body with single f-hole provides a welcome airiness and depth to the guitar’s tone.

Additional specifications on the PRS Special Semi-Hollow include a maple top, mahogany back, 22-fret 25” scale length mahogany neck, rosewood fretboard, Phase III locking tuners with wing buttons, and the PRS Gen III patented tremolo.

Serial Number: 0412179

Weight: 7.2 lbs

Specs

Body
Body Construction	Semi-Hollow Body with Single F-Hole
Top Wood	Maple
Back Wood	Mahogany
Top Carve	Violin
Neck
Number of Frets	22
Scale Length	25"
Neck Wood	Mahogany
Neck Construction	One-Piece
Truss Rod	PRS Double-Acting
Neck Shape	Pattern
Neck Depth at the 1/2 Fret	7/8"
Neck Depth at the 12 1/2 Fret	61/64"
Neck Width at the Nut	1 11/16"
Neck Width at the Body	2 1/4"
Fretboard Wood	Rosewood
Fretboard Radius	10"
Fretboard Inlay	Birds
Headstock Logo	Signature, Inlaid
Neck/Body Assembly
Neck/Body Assembly Type	Set
Finish
Finish Type	High-Gloss Nitro
Hardware
Bridge	PRS Patented Tremolo, Gen III
Tuners	PRS Phase III Locking Tuners with Wing Buttons
Hardware Type	Nickel
Nut	PRS
Truss Rod Cover	"Special"
Electronics
Treble Pickup	McCarty III
Middle Pickup	PRS Narrowfield®
Bass Pickup	McCarty III
Controls	Volume and Tone Controls with 5-Way Blade Pickup Switch and Two Mini-Toggle Coil-Tap Switches
Additional Info
Strings	PRS Signature 10-46
Tuning	Standard (6 String): E, A, D, G, B, E
Case	Hardshell Case
Options	10 Top and Back with Hybrid Hardware

View full product details »

PRS Standard 24 Satin Electric Guitar - Pearl White

PRS

$ 3,500.00

Raise Your Standards

The PRS Standard harkens back to Paul Reed Smith’s pre-factory all-mahogany guitars. Its all-mahogany construction promotes a warm, full, midrange-forward tone, and its “sinky” satin nitro finish brings a stripped-down look and roadworthy feel to the instrument.

The PRS Standard 24 features many classic PRS specifications, including a 25” scale length, Pattern Thin neck with a 24-fret, 10” radius rosewood fretboard, PRS Patented Tremolo, and PRS Phase III tuners with unplated brass shafts.

Under the hood, the PRS Standard 24 is outfitted with PRS DMO treble and bass pickups with volume and tone controls and a 5-way blade switch. PRS DMO (Dynamic, Musical, Open) pickups have a “wide open” sound with vocal character, meaning they deliver clear, pleasant-sounding tones across a wide range of frequencies (bass to treble) in each pickup. DMO pickups were personally designed by Paul Reed Smith and the PRS New Products Engineering team. From our own hands-on research into coveted vintage pickup models to advancements in signal analyzation and “tuning” technology, these pickups incorporate every detail of pickup knowledge PRS has gained in recent years of R&D.

Raise your standards with this stage- and studio-ready guitar.

Serial Number: 0402234
Weight: 6.6 lbs

Specs

Body
Body Construction	Solidbody
Body Wood	Mahogany
Top Carve	Violin
Neck
Number of Frets	24
Scale Length	25"
Neck Wood	Mahogany
Neck Construction	One-Piece
Truss Rod	PRS Double-Acting
Neck Shape	Pattern Thin
Neck Depth at the 1/2 Fret	53/64"
Neck Depth at the 12 1/2 Fret	57/64"
Neck Width at the Nut	1 11/16"
Neck Width at the Body	2 1/4"
Fretboard Wood	Rosewood
Fretboard Radius	10"
Fretboard Inlay	Birds
Headstock Veneer	Rosewood
Headstock Logo	Signature, Inlaid
Neck/Body Assembly
Neck/Body Assembly Type	Set
Finish
Finish Type	Satin Nitro
Hardware
Bridge	PRS Patented Tremolo, Gen III
Tuners	Phase III Locking Tuners w/ Wing Buttons
Hardware Type	Smoked Black
Nut	PRS
Truss Rod Cover	"Standard"
Electronics
Treble Pickup	DMO Treble
Bass Pickup	DMO Bass
Controls	Volume and Tone Control with 5-Way Blade Pickup Switch
Additional Info
Strings	PRS Signature 10-46
Tuning	Standard (6 String): E, A, D, G, B, E
Case	PRS ATA Multi-Fit Molded Case, D1

View full product details »

PRS Studio 10 Top Electric Guitar - Gray Black

PRS

$ 5,600.00

The PRS Studio model is a modern take on a traditional single-single-hum guitar. With PRS’s proprietary Narrowfield pickups in the middle and bass positions and a 58/15 LT humbucking treble pickup, the PRS Studio offers punchy singlecoils, vintage scooped tones, and the chunky kick of a treble humbucker screaming in one instrument. This whole new scope of sounds (that are only possible with a three-pickup guitar) are easily accessible in the Studio model thanks to the push/pull tone control and 5-way blade switch. With seven combinations in all, the PRS Studio covers classic tones but maintains a unique voice making it a perfect “desert island” guitar.

Serial Number: 0381860

Weight: 7.4 lbs

Specifications

BODY
Body Construction	Solidbody
Top Wood	Maple
Back Wood	Mahogany
Top Carve	Violin
Finish	High Gloss Nitro
NECK
Number of Frets	22
Scale Length	25"
Neck Wood	Mahogany
Neck Construction	One-Piece
Truss Rod	PRS Double-Acting
Neck Shape	Pattern
Neck Depth at the 1/2 Fret	7/8"
Neck Depth at the 12 1/2 Fret	61/64"
Neck Width at the Nut	1 11/16"
Neck Width at the Body	2 1/4"
Fretboard Wood	Rosewood
Fretboard Radius	10"
Fretboard Inlay	Birds
Headstock Logo	Signature, Inlaid
NECK/BODY ASSEMBLY
Neck/Body Assembly Type	Set
HARDWARE
Bridge	PRS Patented Tremolo, Gen III
Tuners	PRS Phase III Locking
Hardware Type	Nickel
Nut	PRS
Truss Rod Cover	"Studio"
ELECTRONICS
Treble Pickup	58/15 LT
Middle Pickup	PRS Narrowfield®
Bass Pickup	PRS Narrowfield®
Controls	Volume and Push/Pull Tone Control with 5-Way Blade Pickup Switch
ADDITIONAL INFO
Strings	PRS Signature 10-46
Tuning	Standard (6 String): E, A, D, G, B, E
Case	Hardshell Case
Options	10 Top with Hybrid Hardware

View full product details »

PRS Studio 22 Electric Guitar - Faded Whale Blue

PRS

$ 4,680.00

The PRS Studio model is a modern take on a traditional single-single-hum guitar. With PRS’s proprietary Narrowfield pickups in the middle and bass positions and a 58/15 LT humbucking treble pickup, the PRS Studio offers punchy singlecoils, vintage scooped tones, and the chunky kick of a treble humbucker screaming in one instrument. This whole new scope of sounds (that are only possible with a three-pickup guitar) are easily accessible in the Studio model thanks to the push/pull tone control and 5-way blade switch. With seven combinations in all, the PRS Studio covers classic tones but maintains a unique voice making it a perfect “desert island” guitar.

Serial Number: 0387355

Weight: 8 lbs

Specifications

BODY
Body Construction	Solidbody
Top Wood	Maple
Back Wood	Mahogany
Top Carve	Violin
Finish	High Gloss Nitro
NECK
Number of Frets	22
Scale Length	25"
Neck Wood	Mahogany
Neck Construction	One-Piece
Truss Rod	PRS Double-Acting
Neck Shape	Pattern
Neck Depth at the 1/2 Fret	7/8"
Neck Depth at the 12 1/2 Fret	61/64"
Neck Width at the Nut	1 11/16"
Neck Width at the Body	2 1/4"
Fretboard Wood	Rosewood
Fretboard Radius	10"
Fretboard Inlay	Birds
Headstock Logo	Signature, Inlaid
NECK/BODY ASSEMBLY
Neck/Body Assembly Type	Set
HARDWARE
Bridge	PRS Patented Tremolo, Gen III
Tuners	PRS Phase III Locking
Hardware Type	Nickel
Nut	PRS
Truss Rod Cover	"Studio"
ELECTRONICS
Treble Pickup	58/15 LT
Middle Pickup	PRS Narrowfield®
Bass Pickup	PRS Narrowfield®
Controls	Volume and Push/Pull Tone Control with 5-Way Blade Pickup Switch
ADDITIONAL INFO
Strings	PRS Signature 10-46
Tuning	Standard (6 String): E, A, D, G, B, E
Case	Hardshell Case
Options	10 Top with Hybrid Hardware

View full product details »

PRS Swamp Ash Special Electric Guitar - White Doghair Smokeburst

PRS

$ 2,899.00

Fresh Face and a Versatile Voice

The PRS Swamp Ash Special brings a unique look and sound to the PRS Bolt-On line up. Its swamp ash body is equipped with a versatile hum/“single”/hum pickup configuration. Two 58/15 LT pickups flank a PRS Narrowfield in the middle position, which adds a single-coil bite – without the hum. Paired with a volume, tone, 5-way blade switch, and dual mini-toggle coil-tap switches (for the first time on this model), the Swamp Ash Special has a total of twelve sound combinations. Roll back the tone control for added growl, turn it up for some shimmer, and have fun exploring this versatile tonal palette. The volume level between the humbucking and single-coil settings will remain even through it all.

Additional specifications for the Swamp Ash Special Maple include a 22-fret 25” scale length mahogany neck, maple fretboard for an added bright touch, Phase III locking tuners with unplated brass shafts, and the PRS Gen III patented tremolo.

Overall, the PRS Swamp Ash Special offers tight low-end, bright but mellow high-end, and a welcome twangy tone that can reach “hot country,” blues, and jazz territory. It is a versatile guitar to add to any arsenal.

Serial Number: 0399476
Weight: 7.4 lbs

Specs

Body
Body Construction	Solidbody
Body Wood	Swamp Ash
Top Carve	Violin
Neck
Number of Frets	22
Scale Length	25"
Neck Wood	Maple
Neck Construction	Scarfed
Truss Rod	PRS Double-Acting
Neck Shape	Pattern Regular
Neck Depth at the 1/2 Fret	27/32"
Neck Depth at the 12 1/2 Fret	59/64"
Neck Width at the Nut	1 21/32"
Neck Width at the Body	2 1/4"
Fretboard Wood	Maple
Fretboard Radius	10"
Fretboard Inlay	Birds
Headstock Logo	Signature, Decal
Neck/Body Assembly
Neck/Body Assembly Type	Bolt-On
Finish
Finish Type	High-Gloss Nitro
Neck Finish Type	Satin Nitro
Hardware
Bridge	PRS Patented Tremolo
Tuners	Phase III Locking Tuners w/ Wing Buttons
Hardware Type	Nickel
Nut	PRS
Truss Rod Cover	"Special"
Electronics
Treble Pickup	58/15 LT
Middle Pickup	PRS Narrowfield
Bass Pickup	58/15 LT
Controls	Volume with Tone Control and 5-Way Blade Pickup Switch and Two Mini-Toggle Coil-Tap Switches
Additional Info
Strings	PRS Signature 10-46
Tuning	Standard (6 String): E, A, D, G, B, E
Case	Premium Gig Bag

View full product details »

PRS Wind Through The Tres Dual Analog Flanger

PRS

$ 349.00

DUELING FLANGERS

The PRS Wind Through the Trees dual analog flanger pedal is best described as two flangers fighting each other, resulting in a sound reminiscent of the wind whipping through the trees. With Manual, Depth, and Rate controls per flanger as well as global Regeneration and Added Highs, Wind Through the Trees offers nearly endless tonal possibilities. Bottom line, Wind Through the Trees offers hours of fun for any player.

PRS pedals were created to be high-end pieces of audio gear.

Designed by PRS Guitars in Stevensville, MD, USA. Made in the USA.

SPECIFICATIONS

Pedal Type	Dual Analog Flanger
Analog/Digital	Analog
Inputs	(1) 1/4" Instrument
Outputs	(1) 1/4" Instrument
Bypass Switching	True Bypass
Amperage	22 mA
Power Sources	9V DC Power Supply, regulated and/or isolated (not included)
Batteries	(1) 9V (not included)
Length	5.5"
Width	1.5"
Height	4.5"
Weight	1.3 lbs

View full product details »

Products

HARDWARE

Info

Shop

News & Updates