$ 649.99 $ 1,000.00
The RG1003H is a 3 Channel, 100 watt high gain FET solid state guitar amplifier head with Reverb and a serial F/X loop. It has a 1/8″ stereo media input, headphone output, and a speaker emulated XLR direct output with ground lift. There is also a footswitch included.
$ 279.99 $ 336.00
The Headlight is a unity gain guitar amp selector designed to easily integrate onto a pedalboard and provide the ability to switch between as many as four amplifiers with a single footswitch.
The Headlight has a compact footprint that will fit on any pedalboard, but it's still powerful enough to drive up to four amplifiers without sacrificing on tone. The input features a class-A buffer along with Drag Control load correction that allows you to optimize the impedance for your pickups and recreate the feel of plugging your guitar directly into an amp. Custom transformers isolate the outputs to prevent buzz and hum from ground loops, with ground lift switches to further alleviate noise problems. Should you really want to get loud, the mute footswitch can be configured as an 'all on' switch, activating all four amp outputs simultaneously.
Use the Headlight to switch between four stage amps to create the ultimate setup for clean, crunch, overdrive and power solo! Simply depress the selector footswitch to select the amp you want. Super bright LEDs let you know which amp is active. Use the mute footswitch for quiet on-stage tuning.
Connect your two amps using outputs 1 and 2 and select between them using the right-hand footswitch. Set the left-hand footswitch to ALL-ON and when depressed, both amps will play. The isolation transformers will prevent buzz and hum from ground loops when both amps are on.
Using the Headlight you can feed both direct boxes and amplifiers. The outputs from the direct boxes can be sent directly to the mixer and stage amps can be mic'd.
SPECS
Specifications | ||
---|---|---|
Audio circuit type: | Classic Class-A FET | |
Frequency response: | 30Hz - 30kHz | |
Dynamic range: | 116dBu | |
Gain: | -0.5dBu | |
Clip Level: | +7dB | |
Total harmonic distortion: | 0.01% | |
Intermodulation Distortion: | 0.02% | |
Phase Deviation: | -1.35° @ -20dBu / 1kHz | |
Input Impedance: | 20k to 1MΩ | |
Output Impedance: | 1kΩ | |
Noise: | -112dBu | |
Maximum Input: | +8dB | |
Features | ||
180° polarity reverse, Ground lift, Drag Control | ||
Input Connectors: | 1/4" | |
Output Connectors: | 1/4" | |
General | ||
Construction: | 14-Gauge Steel | |
Size (L x W x D): | 5" x 4.7" x 2" | |
Weight: | 2lb | |
Shipping size (L x W x D): | 6.5" x 5.1" x 2.5" | |
Shipping weight: | 2.4lb | |
Power: | 9V adaptor / 80mA (Center Pin Negative) | |
Conditions: | For use in dry locations only between 5°C and 40°C |
$ 790.00 $ 1,095.00
Arguably the first true Heavy Metal instruments, resophonic guitars made of either brass or steel, created an entirely new instrument category with one intention…more volume! The added benefit of more volume combines with a never-before-heard sound took the musical instrument market by storm. So popular that metal body instruments were selected as the guitar of choice for many a Ragtime, Jazz, and Blues soloist…and the same holds true today.
Serial Number: 2022130
Weight: 8.4 lbs
Specs
$ 615.00 $ 850.00
At the top of the line of our Regal Studio Series Resophonic Guitars, the new and improved RD-40 has been redesigned from the inside out making it the best value when it comes to truly vintage inspired, professional featured, resophonic instruments available. Using our many years of experience in the development and construction of traditional American acoustic instruments, we have also discovered ways to improve upon the most legendary designs from the past without pricing them out of the reach of any level player. Only the finest materials are used to create these new designs that reminisce of the past, while still meeting the demands of today’s modern players. The new body shape takes its cues from instruments of the past; while the real secret to the tone of these instruments lies within. It all starts with a combination of Regal exclusives such as the patented Power Reflex Tone Chamber for added volume, the patented DP-126 Die-cast spider for its bell like response, and a US made, hand-spun aluminum cone. All together work in perfect harmony to assure the maximum, most articulate tone that can be heard in any playing situation.
Weight: 5.6 lbs
Sold Out
$ 3,799.00 $ 3,944.00
This classic 12-string design comes standard with three vintage reissue pickups, stereo output, trapeze tailpiece, vintage knobs and f-hole. Double body binding and pearlescent inlays add a refined touch. X-bracing in the body helps to bring out the full, rich and warm sounds these instruments are known for. The 1993Plus also features Rickenbacker's master variable tone control. This fifth knob allows you to fine tune the EQ between the bass and treble pickups, in a variety of ways and with some unique characteristics.
The haunting, melodic chorus characteristics of Rickenbacker 12-strings continue to benefit from evolution. The original 1993 design was once exclusive to the British distributor Rose Morris in the sixties.
FEATURES
Body$ 2,299.99
This bass is used and in good condition. Little to no signs of wear. The price has been adjusted accordingly.
Comes with OHSC.
The Classic Rickenbacker bass - famous for its ringing sustain, treble punch and solid underlying bass. A subtle strip of binding graces the elegantly curved body and the Rosewood fingerboard. Deluxe triangular inlays and stereo capability are standard features.
|
|
Sold Out
Sold Out
$ 3,499.99
Model | |
Categories | |
Year | |
Fretboard Material | |
Body Material | |
Pickup Configuration | |
Neck Construction | |
Body Shape | |
Number of Strings | |
Right / Left Handed | |
Body Type | |
Neck Material | |
Offset Body | |
Finish Style | |
Bridge/Tailpiece Type | |
Finish Features | |
Number of Frets |
|
$ 3,839.00
Created to exact original specifications of the world’s most popular 12-string electric guitar, the 360/12C63 is an accurate replica of the model George Harrison made so famous. Complete with double-bound body, trapeze tailpiece, and unique Rickenbacker 12-string headstock, the 360/12C63 is true to the 1963 version in every aspect— down to the shading on the Fireglo finish.
Serial Number: 2323695
Weight: 8.4lbs
Sold Out
Created to exact original specifications of the world’s most popular 12-string electric guitar, the 360/12C63 is an accurate replica of the model George Harrison made so famous. Complete with double-bound body, trapeze tailpiece, and unique Rickenbacker 12-string headstock, the 360/12C63 is true to the 1963 version in every aspect— down to the shading on the Fireglo finish.
Serial Number: 2323703
Weight: 8.4lbs
Sold Out
Created to exact original specifications of the world’s most popular 12-string electric guitar, the 360/12C63 is an accurate replica of the model George Harrison made so famous. Complete with double-bound body, trapeze tailpiece, and unique Rickenbacker 12-string headstock, the 360/12C63 is true to the 1963 version in every aspect— down to the shading on the Fireglo finish.
Serial Number:2332678
Weight: 7.8lbs
Sold Out
The Classic Rickenbacker bass - famous for its ringing sustain, treble punch and solid underlying bass. A subtle strip of binding graces the elegantly curved body and the Rosewood fingerboard. Deluxe triangular inlays and stereo capability are standard features.
Body Type | Solid |
No. Frets | 20 |
Scale Length | 84.5 cm (33 1/4'') |
Neck Width at Nut | 42.9 mm (1 11/16'') |
Neck Width at 12th Fret | 54.0 mm (2 1/8'') |
Crown Radius | 25.4 cm (10'') |
Body Wood | Maple |
Neck Wood | Maple |
Fingerboard Wood | Rosewood |
Weight | 4.1 kg (9.0 lbs.) |
Overall Length | 113.8 cm (44 13/16'') |
Overall Width | 34.3 cm (13 1/2'') |
Overall Depth | 31.8 mm (1 1/4'') |
Neck Binding | Yes |
Fret Marker Style | Triangle |
Tailpiece | RIC |
Bridge | RIC |
Neck Type | Through body |
No. of Pickups | 2 |
Type of Pickups | Single Coil |
Output Type | Mono and Stereo |
Machine Heads | Schaller Deluxe |
Sold Out $ 2,556.00
The Classic Rickenbacker bass - famous for its ringing sustain, treble punch and solid underlying bass. A subtle strip of binding graces the elegantly curved body and the Rosewood fingerboard. Deluxe triangular inlays and stereo capability are standard features.
Body Type | Solid |
No. Frets | 20 |
Scale Length | 84.5 cm (33 1/4'') |
Neck Width at Nut | 42.9 mm (1 11/16'') |
Neck Width at 12th Fret | 54.0 mm (2 1/8'') |
Crown Radius | 25.4 cm (10'') |
Body Wood | Maple |
Neck Wood | Maple |
Fingerboard Wood | Rosewood |
Weight | 4.1 kg (9.0 lbs.) |
Overall Length | 113.8 cm (44 13/16'') |
Overall Width | 34.3 cm (13 1/2'') |
Overall Depth | 31.8 mm (1 1/4'') |
Neck Binding | Yes |
Fret Marker Style | Triangle |
Tailpiece | RIC |
Bridge | RIC |
Neck Type | Through body |
No. of Pickups | 2 |
Type of Pickups | Single Coil |
Output Type | Mono and Stereo |
Machine Heads | Schaller Deluxe |
Sold Out $ 2,556.00
This traditional Rickenbacker bass style with dot inlays and no binding was prized by Paul McCartney and Chris Squire when they got their first 4001S models in 1964. Players cherish its traditional look and rounded edges that many claim make it more comfortable than the 4003. The updated 4003S version comes with the improved dual trussrod system. Of course, the famous solid bass tones, ringing sustain and treble punch we’re known for make it a dream. It’s no wonder we’ve received a steady demand of requests to bring this back. This design was once exclusive to the British distributor Rose Morris in the six-ties. Iconic curves of maple form the body with a traditional Rosewood fingerboard. Dot inlays and no binding make this stand out from the standard 4003.
Sold Out $ 2,556.00
This traditional Rickenbacker bass style with dot inlays and no binding was prized by Paul McCartney and Chris Squire when they got their first 4001S models in 1964. Players cherish its traditional look and rounded edges that many claim make it more comfortable than the 4003. The updated 4003S version comes with the improved dual trussrod system. Of course, the famous solid bass tones, ringing sustain and treble punch we’re known for make it a dream. It’s no wonder we’ve received a steady demand of requests to bring this back. This design was once exclusive to the British distributor Rose Morris in the six-ties. Iconic curves of maple form the body with a traditional Rosewood fingerboard. Dot inlays and no binding make this stand out from the standard 4003.
$ 4,000.00
Rickenbacker Model A-22 Model Lap Steel Electric Guitar 1935
Natural aluminum finish
Cast aluminum body
single volume pot with an octagonal Bakelite knob. The fingerboard is integral with the neck and has raised ridges for frets and green, red, blue and black inlayed dot markers. horseshoe magnet pickup
The headstock is fitted with 1920's style open gear strip tuners with grained ivoroid buttons
Overall length is 28 3/4 in. (73 cm.), 7 in. (17.8 cm.)
width, and 1 5/8 in. (4.1 cm.) in depth, measured at side of rim.
Scale length is 22 1/4 in. (565 mm.).
Width of nut is 2 in. (51 mm.).
**Guitar is used in good condition for it's age. Black back could be aftermarket or custom order its not clear and a tone knob was added to lap steel. Guitar is missing one tuner knob, but was replaced by previous owner who welded a dime in it's place. comes with gig bag**
Sold Out
Rickenbacker Vintage reissue hardshell case that will fit all 4000 series bass guitars.
SKU: 50SP5094550
$ 235.00
This genuine Rickenbacker Standard hard case fits all right-handed 4000 series Rickenbacker basses and has a compartment for accessories.
**This case is used in good condition, Hardshell has two small crack above first and last latch and one below first latch on case (see Photos)
Sold Out
This genuine Rickenbacker Standard hard case fits all right-handed 4000 series Rickenbacker basses and has a compartment for accessories.
**This case is used in good condition, Hardshell has two small crack above first and last latch on case (see Photos)
$ 184.99 $ 259.00
The RocknRoller® Multi-Cart® R10RT is outfitted with rugged, foam-filled no-flat 10" rear wheels and 5" front swivel casters that will allow you to move massive amounts of gear quickly and easily. The R-Trac® tires ride smoothly with excellent traction, similar to pneumatic tires, but without the hassle of upkeep or repair. The patented 8-in-1 cart can transform easily to adjust to various load sizes, allowing you to move large amounts of gear in no time at all. Extending from 34" to 52" in length, the R10RT has a weight capacity of 500lbs, but also folds small for storage or transport in a vehicle. The textured powder coated steel is durable and also reduces slippage during transport.
Popular Uses:
DJ & Live Sound, Film & TV Production, Location Sound, Facility Maintenance, General Industrial, General Contracting, Electrical Contracting, Wedding Photography, Live Performance, Drums & Percussion, HVAC Contracting, Sports, Scientific/Field Study/Research, Delivery Vans, Pet Shows, Trade Shows
Specifications:
RocknRoller® Multi-Cart® 8-in-1 Equipment Transporter - Model R10RT
Additional specifications:
Tubing gauge: 16 gauge (0.065" wall)
Tubing size on main frame: .75" and 1" square steel tube
19mm axle
Polypropylene Hub with Polyurethane Foam tires
$ 159.99 $ 204.00
The RocknRoller® Multi-Cart® R6RT is outfitted with rugged, foam-filled no-flat 8" rear wheels and 4" front swivel casters that will allow you to move massive amounts of gear quickly and easily. The R-Trac® tires ride smoothly with excellent traction, similar to pneumatic tires, but without the hassle of upkeep or repair. The patented 8-in-1 cart can transform easily to adjust to various load sizes, allowing you to move large amounts of gear in no time at all. Extending from 28" to 42.5" in length, the R6RT has a weight capacity of 500lbs, but also folds small for storage or transport in a vehicle. The textured powder coated steel is durable and also reduces slippage during transport.
Popular Uses:
Facility Maintenance, Household, Warehouse & Storage, General Contracting, Electrical Contracting, Wedding Photography, Live Performance, Guitar & Bass, Drums & Percussion, HVAC Contracting, Scientific/Field Study/Research, Delivery Vans, Pet Shows, Trade Shows, Sales Representative
Specifications:
RocknRoller® Multi-Cart® 8-in-1 Equipment Transporter - Model R6RT
Additional specifications:
Tubing gauge: 16 gauge (0.065" wall)
Tubing size on main frame: .75" and 1" square steel tube
19mm axle
Polypropylene Hub with Polyurethane Foam tires
$ 439.00
Specifications