$ 649.99 $ 899.99
The AC10 was one of the first amplifiers to bear the VOX name and has long been adored for his ability to achieve rich, articulate tube tone at very manageable volumes. For this reason, the AC10 has become a highly coveted piece of VOX history since it’s discontinuation in 1965. Now, nearly 50 years later, VOX is proud to introduce the AC10C1, a modern take on this classic design. More portable than the AC15 and more powerful than the AC4, the AC10C1 features the classic Top Boost tone circuit that provides an array of classic and modern tones. Now equipped with reverb and a master volume, the AC10C1 is the perfect companion for the home, studio or stage.
10 Watts RMS
1 x 10″ Celestion VX10
1 x Normal Input Jack
1 x External Speaker Jack
Volume, Gain, Bass, Treble, Reverb
2 x 12AX7
2 x EL84
520 x 210 x 410 mm | 20.47 x 8.27 x 16.14 inches
12.3 kg | 27.12 lbs
$ 899.99 $ 1,274.99
15 watts of pure Brit-inspired tone, pumping through a 12" Celestion greenback speaker.
An Evolution in Tone
Vox Custom amps offer 2 channels: Normal and Top Boost. Each channel is equipped with its own Volume control, and the Top Boost channel offers highly interactive Treble and Bass tone controls. This powerful channel pairing provides an abundance of tone-crafting control, letting you dial in a classic sound that is all your own.
Both channels share master Tone Cut and Volume controls. The Tone Cut control operates in the power stage rather than the preamp stage, allowing an additional degree of tone shaping. The Master Volume control works in conjunction with the individual volumes of each channel to create just the right degree of gain staging. By balancing the individual and Master volumes, the Vox Custom Amps can deliver everything from a clean Vox "chimey" sound to a powerful overdriven tone.
Sound in Motion
You can sweeten the sound of your Custom Series amplifier using the Vox Classic Tremolo, with adjustable speed and depth. A warm Spring Reverb is also included on all Custom Series guitar amps, adding spaciousness to the sound. All Vox Custom amplifiers can use the Vox VFS2 footswitch, allowing you to turn the Reverb and Tremolo effects on and off as you continue to play.
Power Sharing
The Vox AC15C1 combo makes use of three 12AX7 preamp tubes and uses a pair of EL84 tubes to drive a single 12" Celestion G12M Greenback. All guitar amps in the Vox Custom Series offer a switchable 8/16-ohm output jack for powering an external speaker cabinet when you need to speak with a little more authority; using this jack will mute the internal speakers. Additionally, a second extension speaker jack allows you to run an extra 16-ohm cabinet along with the internal speakers for a fuller sound.
$ 1,299.99 $ 1,839.99
The Vox AC15C1 Custom guitar combo amp offers maximum tonal dexterity to countless guitar players around the world. Featuring a single 12 inch Celestian Blue Alnico speaker that is driven by 15 watts of power, the AC15C1 Custom delivers that Vox tone that has been around for over 50 years.
An Evolution in Tone
Vox Custom Series amps offer two channels: Normal and Top-Boost. Each channel is equipped with its own Volume control, and the Top Boost channel offers highly interactive Treble and Bass tone controls. This powerful channel pairing provides an abundance of tone-crafting control, letting you dial in a classic sound that is all your own.
Both channels rely on the Tone Cut and Volume controls in the Master section. The Tone Cut control operates in the power stage rather than the preamp stage, allowing an additional degree of tone-shaping. The Master Volume control works in conjunction with the individual volumes of each channel to create just the right degree of gain-staging. By balancing the individual and Master volumes, the Custom Series can deliver everything from a clean Vox chimey sound to a powerful overdriven tone.
Sound in Motion
You can sweeten the sound of your Custom Series amplifier using the Vox Classic Tremolo effect. Both the speed and the depth are adjustable, allowing you to generate just the sound you want. A warm Spring Reverb is also included on all Custom Series amps, adding spaciousness to the sound. All Custom Series amps can use the VOX VFS2 footswitch, allowing you to turn the Reverb and Tremolo effects on and off as you continue to play.
Power Sharing
The AC15C1 combo makes use of 3 x 12AX7 preamp tubes and uses pair of EL84 tubes to drive a single 12 Celestion G12M Greenback. All models in the Custom Series offer a switchable 8/16 ohm output jack for powering an external speaker cabinet when you need to speak with a little more authority; using this jack will mute the internal speakers. Additionally, a 2nd extension speaker jack allows you to run an extra 16 ohm cabinet along with the internal speakers for a fuller sound.
Vox AC15C1 Custom Combo Amp Specifications
$ 1,499.99 $ 2,049.99
For those who crave more power, the AC30 expands on the captivating sound of its little brother by doubling the wattage. Employing a quartet of EL84 power tubes, the AC30 Custom pumps 30 watts of remarkable tone through a pair of 12” Celestion Greenback or Alnico Blue speakers. Capable of both enchanting clean and raucous overdriven sounds, the signature chime of the AC30 Custom pairs seamlessly the intricacies of your playing style, resulting in a sound that is truly your own. Perhaps the most iconic amplifier in VOX’s pedigree, the AC30 earned its place in history as the amplifier that powered the British Invasion. Since then, the AC30 has remained the choice of the world’s most accomplished artists who have come to rely on its unique voice to amplify theirs.
VOX AC30C2 Custom Specifications
$ 2,799.99 $ 3,090.99
There may never have been an amp boasting such a lofty and pure sound in the entire history of VOX. The VOX Hand-Wired Series relies on the painstaking technique of turret board hand-wiring – a method requiring a high level of skill and craftsmanship – is used, resulting in wiring that’s beautiful in its artistry, ensuring an efficient signal path with minimal loss and no restriction in amplitude. In the Hand-Wired Series, tubes, transformers, speakers, chassis, and custom parts all join together in an ideal state to deliver the richest and most powerful sonic experience – the ultimate amp. Not bound by tradition, the VOX Hand-Wired Series also provides a variety of new functions that keep pace with the needs of today’s artists. Offering a rich variety of tonal shadings and a broad model lineup, the enormous potential of the VOX Hand-Wired Series will reveal itself in any musical scenario.
Available models:
AC30HW2: 30 Watts, 2 x 12″ Celestion G12M Greenback Speakers
AC30HW2X: 30 Watts, 2 x 12″ Celestion Alnico Blue Speakers
30 Watts RMS
8 or 16 Ohms
2 x 12″ Celestion Alnico Blue Speakers
1 x Normal High Input Jack
1 x Normal Low Input Jack
1 x Top Boost High Input Jack
1 x Top Boost Low Input Jack
1 x Foot Switch Jack
2 x External Speaker Jacks
Master Volume, Master Tone Cut, Normal Volume, Top Boost Volume, Top Boost Bass, Top Boost Treble
3 x ECC83 | 12AX7 (preamp)
4 x EL84 (power amp)
1 x GZ34 (rectifier)
705 x 260 x 550 mm | 27.76 x 10.24 x 21.65 inches
30.8 kg | 67.9 lbs
$ 1,999.99 $ 2,879.99
Sold Out
VOX’s AC4C1 delivers the coveted sound of the AC30 Top Boost circuit in an all-tube, 4 watt Class A amplifier. An ideal choice for the home or the studio, the AC4 Custom serves up an array of authentic VOX tone through a Celestion 10” speaker and can even be paired with external speaker cabinet for more tonal diversity. This iconic low-wattage amp was first introduced by VOX in 1961 and is still the choice of many modern guitarists who are drawn to its mesmerizing tone and classic aesthetic. Whether you’re already a member of the VOX family, or you’re looking for your way in, no collection is complete without an AC4.
**This amp is used and in great condition. Little to no signs of use. The price has been adjusted accordingly.
$ 499.99 $ 637.99
Among the various VOX tube amps, the AC4 has remained one of the most popular over the years, as they provide a simple and hassle free way to enjoy the rich sound of a tube-driven amp. While previous models were equipped with a 10" speaker, this new model features a 12" Celestion speaker that delivers even more robust sound levels. With diamond grille cloth and basket-weave vinyl exterior, it also carries on the classic looks of the VOX tradition. This is a Class A tube amp that you can enjoy whether you're practicing at home, performing live, or recording.
The AC30's Top Boost sound has fascinated guitarists around the world for over fifty years. Capable of massive crunch or the clean, classic "chime," this Top Boost tone is the essence of VOX's identity. The AC4C1-12 now delivers this unbeatable sound in a portable, compact body. Gain control, Bass and Treble tone controls, and a Master Volume allow any player to easily recreate this historic sound.
Sold Out $ 589.99
Inspired by the legendary rigs used during the British Invasion, the MINI SUPERBEETLE BASS is an instantly recognizable tribute to VOX's iconic early days. With Nutube-equipped analog preamp circuit and on-board compressor and fuzz, this little amp delivers powerful bass tones that have to be heard to be believed.
$ 999.99 $ 1,499.99
Check out VOX's flagship amps equipped with Nutube, the next-generation vacuum tube. The lineup consists of two models: the MVX150C1 combo amp and the MVX150H amp head.
While preserving the basic structure of a vacuum tube, VOX engineers have eliminated the problematic aspects of tubes, and succeeded in creating a dream device that’s compact, consumes little power and has a long lifespan. This amazing device has already been used in the MV50 small head amp as well as in a variety of musical instruments. The MVX150 series is the culmination of this technology.
In order to fully express the potential of the Nutube, both the preamp and power-amp sections feature a Nutube. The newly designed power amp uses NuPower technology, and attains sound quality and stunning power that surpasses conventional tube amps. The two-channel design covers a wide range of sounds, from clean to high-gain, and everything in between. The MVX150 also features useful functionality such as a WET ONLY output for the on-board reverb and effects send/return. Additionally, the combo-type MVX150C1 specially features a UK-made Celestion Redback speaker that covers a broad range of frequencies and can handle the high output of the MVX150.
The MVX150 series represents a new frontier of amplifiers, one that challenges the established conceptions of large tube amps and costly boutique amps.
The world’s first large tube amp equipped with a Nutube in both the preamp and power amp
The MVX150 series challenges existing concepts of tube amps; it features a Nutube in both the pre-amp and power amp sections, delivering the fat and warm sound that is the characteristic of tubes. Careful attention has been paid not only to the Nutube, but also to every aspect of the analog design for the peripheral circuitry as well. Additionally, there’s no need to worry about maintenance, such as tube replacement, that is inevitable for conventional tube amps.
What is the Nutube?
Nutube is a new vacuum tube that was developed by KORG Corporation in conjunction with Noritake Itron Corporation as an application of vacuum fluorescent display technology. Like a conventional vacuum tube, a Nutube has an anode grid filament structure, and operates as a complete triode tube. It provides the same rich overtones and response that are distinctive of conventional vacuum tubes.
Power amp section uses NuPower technology
The power amp section is one of the important factors that determine the distinctive response and playability of a tube amp. VOX has always paid careful attention to the design of the power amp section, notably in its Valve Reactor circuit. With the MVX150 series, VOX have begun using newly developed NuPower technology, which takes full advantage of the Nutube’s sound potential and also delivers the advantages of conventional tubes and solid-state power. Tube power is the key to stunning dynamics, while solid state power has the advantage of stability, wide range, and high output. The NuPower design utilizes the advantages of both to create a powerful, yet nuanced power section that compliments your playing style.
What is NuPower?
NuPower is a power amp design that combines the Nutube with a solid-state amp, obtaining the advantages of both.
Like the power section of a conventional vacuum tube amp, the Nutube is used in a push-pull configuration, and the dynamic response of the speaker is detected and fed back to the previous stage of the circuit.
This generates sag, power tube distortion, and dynamic frequency response change, delivering true vacuum tube amp sound with its lively and dynamic response.
Additionally, since this amp possesses the wide frequency response that is characteristic of solid state amps, it can provide everything from wide-range clean sound with pristinely clear highs to high-gain sound with unbeatable lows.
Another major advantage of NuPower is that it ensures stable operation in any environment without requiring the maintenance that is needed by conventional vacuum tubes.
Controls that allows versatile sound-shaping
The MVX150 series features a two-channel design that covers a wide variety of sounds. In addition to EQ, Channel 1 provides CLEAN/CRUNCH, BRIGHT, and FAT modes. Channel 2 lets you switch between RHYTHM/LEAD, BRIGHT, FAT, and MID-SHIFT modes. PRESENCE and RESONANCE controls are also provided, which let you adjust the ultra-high and ultra-low regions respectively. You can not only re-create iconic guitar sounds of the past, but also aggressively shape your tone in all-new ways. The bias voltage of the Nutube used on each channel of the preamp can be also adjusted, allowing you to control the response and character of the sound, providing a dramatically expanded expressive scope from vintage to modern.
Includes practical functions, such as effects send/return and WET ONLY output
The MVX150 series provides many extended features, such as effects send/return jacks that allow you switch between parallel and series.
As on the Valvetronix series, the power level control lets you adjust the level in six stages, all while maintaining the sense of loudness and distortion. There’s also WET ONLY output that lets you easily set up a wet/dry rig simply by adding an additional speaker cabinet. In this setup the MVX150 will output just the dry sound from the conventional speaker, while the WET ONLY output emits only the sound processed by a send/return connected effect unit or the internal reverb unit. By utilizing this function, you can easily create the same dry/wet system as a professional stage setup using just this one unit, without using a separate power amp or complex connections.
The MVX150 also provides an EMULATED LINE OUT which is useful not only during live performances but also in the recording studio. This output emulates the sound of a mic’d speaker cabinet, making it easy to record with realistic amp sounds even when using a direct-line connection.
Use a foot switch to change channels or turn effects on/off
By using a separately sold footswitch, you can change channels, turn reverb on/off, or switch send/return on/off using your foot. You can also use it to switch between MASTER 1 and MASTER 2, and instantly change the master volume level itself. Two footswitches can be connected, allowing you to smoothly transition from a rhythm part to a solo, which is a real convenience during live performances.
Sold Out $ 133.99
The Vox V845 Classic Wah Wah Guitar Effects Pedal is based on the specifications of the original pedal developed by VOX in the '60s. The V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. The fitted AC power connector saves on batteries and the outer case is coated with tough all-black finish making the VOX Classic Wah-Wah a perfect choice for your pedal board.
VOX developed the world's first Wah Wah effect during the '60s to give guitarists the ability to sound like a trumpet being muted-an important musical ingredient of the day. VOX's original Wah Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since.
V845 Classic Wah Wah Guitar Effects Pedal
Sold Out $ 359.99
The legendary V846 is back, and it's better than ever. Introducing the V846-HW, a wah pedal for the tone enthusiast, featuring hand-wired turret board construction and premium components.
VOX created their first wah wah pedal back in the 1960s and guitarists from around the world rushed to embrace it. Now in 2011, the V846 has been reborn as the VOX V846-HW Hand-Wired Wah Wah Pedal. While its classic tone is undeniable, VOX's V846-HW writes new chapters in the wah book of sound. As its name implies, the V846 Hand Wired boasts hand-wired turret board construction. Every component, including the inductors, resistors, capacitors, and the potentiometer has been carefully selected for premium fidelity and tone, a tone-preserving true bypass was even added to the original design. Outside, the die-cast body features a sandblasted exterior with crepe finish. The V846-HW is a perfect combination of VOX's world-famous technology, with classical yet modern specifications.
Hand Wired Artistry
The hand-wired turret board construction of the V846-HW requires a high level of craftsmanship, technical skill, and precise manual assembly. Labor intensive, this hand-wiring artistry creates an ideal and efficient signal path. Responding to every nuance of the guitarist's touch.
True Bypass
Designed as a premier pedal for the tone purist, the V846-HW provides a true bypass circuit to meet the needs of today's guitarist. Any coloration of the sound or loss in audio quality when the wah function is off has been totally removed.
Vintage-Spec Inductor; Smooth Potentiometer
The VOX V846-HW Hand-Wired Wah Wah pedal uses a specially-voiced vintage-spec Halo type inductor. The carefully selected magnetic core material and winding ensures a perfect reproduction of the original V846's wah sound. The potentiometer features a distinctive response and is sealed for durability. Thanks to a remarkably smooth curve, the region at the very beginning of the pedal's travel - a region difficult for conventional wah pedals - is assured sensitive response with an unprecedentedly fine degree of control.
Premium Components
Carbon composite resistors (made by KAMAYA ELECTRIC CO., LTD) are used for their extremely low noise and uncolored sound. The high-quality footswitch made by Carling Technologies, was selected for both its reliability and its good feel underfoot. The Switchcraft jacks used are well-known and trusted for their sturdy bushings, simple construction and high reliability. These carefully selected components come together in the amazing VOX V846-HW Hand Wired Wah Wah.
Sold Out
**Pedal is still new in box
Sold Out
VT40+
The perfect combination of innovation and tradition, the VOX Valvetronix + Series combines sophisticated modeling technology with vintage know-how to provide an array of authentic guitar tones that are worthy of the name VOX. Based on the acclaimed VOX Valve Reactor circuit, which utilizes a genuine 12AX7 vacuum tube in the power stage, these advanced digital amplifiers retain the familiar warmth of a genuine tube amp. True tube tone is pumped through a custom designed 10” VOX speaker, while the intuitive control set makes customizing the VT40+ to your liking simple.
VT40+
Valvetronix+ VT40+ Specification
Number of amp models: 33
Number of effects Pedal effect types: 11
Modulation/Delay types: 11
Reverb types: 3
Noise reduction: 1
Number of programs Preset: 99
User: 8 (2 banks x 4 channels)
Input/output jacks
Top panel: INPUT jack (¼” Mono), PHONES jack (?” Stereo), AUX IN jack (?” Stereo)
Rear panel: FOOT SW jack
Power amp output VT40+: maximum 60 W RMS @ 8 ?
Speaker VT40+: VOX original; 10 inch, 8 ohms (x1)
Power supply requirements: AC, local voltage
Power consumption VT40+: 36 W
Dimensions (W x D x H) VT40+: 422 x 222 x 406 mm / 16.6 x 8.7 x 16.0 inches
Weight VT40+: 10.9 kg / 24 lbs.
Included items: Power cable
Options: VOX VFS5 Foot Switch
$ 215.00
This amp is in Mint condition. Still sealed in box never been used.
Grab. Go. Jam.
The VX50 GTV was born from a desire to open up new possibilities for guitar amps. A design that’s almost unreasonably lightweight, an internal structure carefully calculated for the optimal sound, realistic and stage-ready sounds driven by modeling technology, and the next-generation Nutube vacuum tube featured on the VX50 GTV are some of the many leading-edge specifications that make this a rediscovery of the guitar amp. Overturning existing ideas of guitar amps, the VX50 GTV will allow you to enjoy playing guitar in any musical scene.
■ A total of 11 amp models, polished more than ever
Thanks to their many years of developing modeling amps, VOX delivers the ultimate in sound. Proprietary VET (Virtual Element Technology) enables unprecedented realism, reproducing not only the audible result but rethinking the original circuit itself, painstakingly modeling even individual components that affect the sound. In addition to the classic AC30, this one unit covers a diverse multitude of sounds that include famous tube amps, modern high-gain amps, and rare boutique amps. Newly added is a LINE type which supports not only electric guitar but also acoustic guitar, further expanding this unit’s usefulness.
■ A well-rounded selection of eight effect types
Also included is a full selection of the effect types that are indispensable in shaping your sound. You can simultaneously use both types, modulation and delay/reverb, and choose from four types each, giving you a total of eight variations. This means that you have the ability to add the final touches to shape your overall guitar sound. There’s also a tap button, so you can set parameters such as delay time in an intuitive manner.
■ Internal structure crafted for excellent acoustic response, with an ultra-lightweight sealed body made of ABS, and a bass-reflex design
You’ll be amazed the instant you lift this unit! The VX50 GTV achieves an ultra-lightweight design that seems unreasonable for a guitar amp, but lightness is not its only advantage. A sealed body made of ABS for its excellent acoustical properties minimizes unneeded vibration, eliminating loss of sound and efficiently projecting your guitar sound. The bass-reflex structure ensures good coverage of the low-frequency range. Unlike the case with a typical small amp, you will feel no lack of power.
■ Equipped with a Nutube, the VX50 GTV expands its range of action even farther
The VX50 GTV features a Nutube, the new-generation vacuum tube. Using electro-luminescent technology with the same structure as a conventional vacuum tube, the Nutube has been featured on a variety of VOX and other products. The distortion and sense of compression that you expect from a vacuum tube, and even the response and playing feel, perfectly capture the feeling of playing a vacuum tube. In addition to the light-weight design that was unobtainable by a conventional vacuum tube amp, the Nutube brings additional unique advantages such as being maintenance-free and delivering amazing cost-effectiveness.
■ The USB audio interface-equipped VX50 GTV
The VX50 GTV features USB audio interface functionality that lets you connect it to your computer via USB, and record the Nutube sound directly. In addition to letting you enjoy performing, this unit brings high potential as an amp that integrates well with your desktop music setup.
$ 199.97
Fuzztration (noun): The torturous feeling of desperation when searching for THE perfect fuzz.
$ 149.97
Based on an infamous circuit from a classic 1980’s high gain distortion pedal, the Ratsbane is Brian’s answer to the countless requests he has received to build his interpretation of this much-loved design.
Sold Out $ 11,134.42
Serial Number: J164093-24
Weight: 9 lbs
$ 1,999.00
**This guitar is used and in fair condition. Signs of wear can be found throughout the guitar, especially scratches on the back (see attached pictures). Comes with a used gig bag. The price has been adjusted accordingly.
Serial Number: GPSF00113115
Weight: 7.8 lbs
Brand
Model
Finish
Year
Made In
Right / Left Handed
Number of Strings
Body Shape
$ 3,100.00
SPECS
Matched Headstock: | --- |
Machineheads: | Warwick Machine Heads |
Nut: | Just-A-Nut III |
Neck Wood: | Ovangkol neck |
Fretboard: | Wenge fingerboard (fretted), Tigerstripe Ebony fingerboard (fretless) |
Inlay: | --- |
Fluorescent Side Dot: | Fluoescent Side Dots |
Fingerboard Radius: | 26" |
Scale length: | 34" (long scale) / 864 mm |
Width Nut: | 45,0 mm / 1.8" |
Width 12th fret: | 60,8 mm / 2.4" |
Width 24th fret: | 69,11 mm / 2.7" |
Fret quantity material and size: | 24 Jumbo extra hard Brass frets (width: 2,9mm/ height: 1,3mm) |
Frets: | IFT - Invisible Fretwork Technology |
Body Shape: | Curved Body Shape |
Bodywood (Topwood / Backwood): | 2-3 pcs. US Cherry |
Pickups: | Active MEC pickups J/J |
Electronics: | Active MEC 2-way electronics |
Pot layout: | Volume (P/P) / balance / bass / treble |
Switch: | --- |
Function of switch: | --- |
Pickguard: | --- |
Bridge system: | 2-piece Warwick Bridge |
Strap system: | Warwick security locks |
Construction: | Bolt-On |
Color Possibilities Righthand: | Satin / Oil / Oil Colours |
Color Possibilities Lefthand: | --- |
Hardware colour: | Chrome (Black or Gold upgrade available) |
String label / gauges: | Warwick Black Label Strings, Stainless Steel: .045" - .135" (40301 M 5B 045/135) |
Weight: | Warwick basses are crafted using only the highest quality sustainably grown woods from multiple species and origins. Due to the organic nature of wood, the density of individual pieces may vary. It is not possible to advertise the exact weight of the instrument. |
included accessories: | Warwick User Kit bag including hex key tools and Cleaning cloth (RB PROD 50990 B COMP) |
Packing: | Starline RockBag® (RB 20505 STARLINE) |
Certificate: | No Custom Shop Options possible |
sug. retail price: | --- |
E-Compartment Cover: | --- |
Sold Out $ 2,518.80
Matched Headstock: | --- |
Machineheads: | Warwick Machine Heads |
Nut: | Just-A-Nut III |
Neck Wood: | Maple neck with Ekanga Veneer Stripes |
Fretboard: | Tigerstripe ebony fingerboard |
Inlay: | Robert Trujillo mother-of-pearl inlays |
Fluorescent Side Dot: | --- |
Fingerboard Radius: | 26" |
Scale length: | 34" (long scale) |
Width Nut: | 45,0 mm / 1.8" |
Width 12th fret: | 60,8 mm / 2.4" |
Width 24th fret: | 69,11 mm / 2.7" |
Fret quantity material and size: | 24 Extra High Jumbo Nickelsilver frets ( Width: 2.9 mm / Height: 1.3mm) |
Frets: | --- |
Body Shape: | Carved Top & Flat Back |
Bodywood (Topwood / Backwood): | Alder body |
Pickups: | Active EMG J/J pickups |
Electronics: | Active MEC 3-way electronics |
Pot layout: | Volume push/pull / balance / stacked treble/bass / mid |
Switch: | --- |
Function of switch: | --- |
Pickguard: | --- |
Bridge system: | 2-piece Warwick Bridge |
Strap system: | Warwick security locks |
Construction: | Bolt-On - special asymetrical neckshape |
Color Possibilities Righthand: | Available as fretted in Black Satin Finish only |
Color Possibilities Lefthand: | No lefthand version available |
Hardware colour: | Chrome Hardware |
String label / gauges: | Warwick Red String 045" - 135" (42301 M) |
Weight: | 4.3 kg |
included accessories: | Hex key tools |
Packing: | Deluxe RockBag® (RB 20505 B) |
Certificate: | --- |
sug. retail price: | --- |
E-Compartment Cover: | --- |
$ 1,799.95 $ 2,518.80
Matched Headstock: | --- |
Machineheads: | Warwick Machine Heads |
Nut: | Just-A-Nut III |
Neck Wood: | Maple neck with Ekanga Veneer Stripes |
Fretboard: | Tigerstripe ebony fingerboard |
Inlay: | Robert Trujillo mother-of-pearl inlays |
Fluorescent Side Dot: | --- |
Fingerboard Radius: | 26" |
Scale length: | 34" (long scale) |
Width Nut: | 45,0 mm / 1.8" |
Width 12th fret: | 60,8 mm / 2.4" |
Width 24th fret: | 69,11 mm / 2.7" |
Fret quantity material and size: | 24 Extra High Jumbo Nickelsilver frets ( Width: 2.9 mm / Height: 1.3mm) |
Frets: | --- |
Body Shape: | Carved Top & Flat Back |
Bodywood (Topwood / Backwood): | Alder body |
Pickups: | Active EMG J/J pickups |
Electronics: | Active MEC 3-way electronics |
Pot layout: | Volume push/pull / balance / stacked treble/bass / mid |
Switch: | --- |
Function of switch: | --- |
Pickguard: | --- |
Bridge system: | 2-piece Warwick Bridge |
Strap system: | Warwick security locks |
Construction: | Bolt-On - special asymetrical neckshape |
Color Possibilities Righthand: | Available as fretted in Black Satin Finish only |
Color Possibilities Lefthand: | No lefthand version available |
Hardware colour: | Chrome Hardware |
String label / gauges: | Warwick Red String 045" - 135" (42301 M) |
Weight: | 4.3 kg |
included accessories: | Hex key tools |
Packing: | Deluxe RockBag® (RB 20505 B) |
Certificate: | --- |
sug. retail price: | --- |
E-Compartment Cover: | --- |
$ 1,249.00 $ 1,498.80
Serial Number: RBG562522-21
Weight: 8.8lbs
Specifications
Sold Out
**This guitar is used and in good condition. Some wear and signs of usage but otherwise solid. Price has been adjusted accordingly.