With graphics designed by Kramer Custom Graphic Artist Eric Caspers, this warning tape-themed finish will put everyone on notice that dangerous levels of shredding are about to be unleashed! The Baretta is a tribute to one of the most iconic and original guitar designs in rock. Features an alder body, satin-finished hard maple neck, a single Seymour Duncan® JB™ zebra-coil humbucker, and a Floyd Rose® 1000 series tremolo with an R2 1000 series locking nut. It also comes equipped with an EVH® D-Tuna® and a Floyd Rose LRT-L40 Trem Stop, and it is finished in an eye-catching Warning Tape on White Red. A premium gig bag is also included.
Serial Number: 21032900575
Weight: 9.0lbs
Detailed Specifications
Body
Body Shape: Baretta
Body Material: Alder
Finish: Gloss Body, Satin Neck
Neck
Material: Maple
Profile: Kramer Thin Profile
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12.6"
Number Of Frets: 22
Frets: Jumbo
Nut Material: Floyd Rose R2 1000 Series Locking Nut with Chrome String Retaining Bar
Nut Width: 1.626"
Inlays: Black Dots
Joint: Bolt On
Hardware
Finish: Black
Tuner Plating: Black
Bridge: Floyd Rose 1000 Series Tremolo with LRT-L40 Trem Stop and EVH D-Tuna Drop D Tuning System
Tuning Machines: Mini Die Cast
TrussRod: Dual Action
Truss Rod Cover: Black with Gold Print "Baretta"
Control Knobs: Black Chrome Knurled
Control Covers: Black
Strap Buttons: 2 - Bottom and Upper Horn
Mounting Rings: Black
Electronics
Bridge Pickup: Seymour Duncan JB
Controls: 500K Master Volume with Push/Pull Series/Parallel Switch
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Kramer Premium Gig Bag
Accessories: Black Wrench Holder - Back of Headstock
This Leopard is on the prowl and is ready for some shredding. Designed by Kramer Custom Graphic Artist Chris Stemmer and influenced by classic Kramer Leopard graphics, this bright take will make you stand out over other cats for sure! The Baretta Vintage is a tribute to one of the most iconic and original guitar designs in rock. Features an alder body, satin-finished hard maple neck, a single Seymour Duncan® JB™ zebra-coil humbucker, and a Floyd Rose® 1000 series tremolo with an R2 1000 series locking nut. It also comes equipped with an EVH® D-Tuna® and a Floyd Rose LRT-L40 Trem Stop, and it is finished in an eye-catching Rainbow Leopard. A premium gig bag is also included.
Serial Number: 21022901434
Weight: 8.4lbs
Detailed Specifications
Body
Body Shape: Baretta
Body Material: Alder
Finish: Gloss Body, Satin Neck
Neck
Material: Maple
Profile: Kramer Thin Profile
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12.6"
Number Of Frets: 22
Frets: Jumbo
Nut Material: Floyd Rose R2 1000 Series Locking Nut with Black String Retaining Bar
Nut Width: 1.626"
Inlays: Black Dots
Joint: Bolt On
Hardware
Finish: Black
Tuner Plating: Black
Bridge: Floyd Rose 1000 Series Tremolo with LRT-L40 Trem Stop and EVH D-Tuna Drop D Tuning System
Tuning Machines: Mini Die Cast
TrussRod: Dual Action
Truss Rod Cover: Black with Gold Print "Baretta"
Control Knobs: Black Chrome Knurled
Control Covers: Black
Strap Buttons: 2 - Bottom and Upper Horn
Mounting Rings: Black
Electronics
Bridge Pickup: Seymour Duncan JB
Controls: 500K Master Volume with Push/Pull Series/Parallel Switch
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Kramer Premium Gig Bag
Accessories: Black Wrench Holder - Back of Headstock
With custom graphics designed by Kramer Custom Graphic Artist Chris Stemmer, the hand-painted original was displayed at the 2020 Winter NAMM Show Kramer exhibit and is now available to everyone. Inspired by glittery, hot-rodded collectible toy cars from the 1960s, the graphics of this Baretta, already one of the "fastest metal guitars in the world," really make it look the part! This Baretta is part of the Kramer Custom Graphics Collection and is a tribute to one of the most iconic and original guitar designs in rock. Featuring an alder body, hard maple neck, a single Seymour Duncan® JB™ zebra-coil humbucker™, a Floyd Rose® 1000 series tremolo with an R2 1000 series locking nut, an EVH® D-Tuna® Drop D Tuning System, and a Floyd Rose LRT-L40 Trem Stop to keep the tuning stable when using the D-Tuna. Plus, with the Blue Sparkle with Flames Custom Graphics finish, it looks as hot as it plays.
Serial Number: 21122902334
Weight:
Detailed Specifications
Body
Body Shape: Baretta
Body Material: Alder
Finish: Gloss Body, Satin Neck
Neck
Material: 3-piece Maple
Profile: Kramer Thin Profile
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12.6"
Number Of Frets: 22
Frets: Jumbo
Nut Material: Floyd Rose R2 Locking Nut with Chrome String Retainer
Nut Width: 1.626"
Inlays: Black Dots
Joint: Bolt On
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Floyd Rose 1000 Series Tremolo with LRT-L40 Trem Stop and EVH D-Tuna Drop D Tuning System
Tuning Machines: Mini Die Cast
TrussRod: Adjustable
Truss Rod Cover: Black, with Baretta in Gold Print
Retro fashion trends wouldn’t be complete without some snakeskin, and this Baretta, with “Viper” graphics designed by Kramer Custom Graphic Artist Chris Stemmer, really delivers! Shredders chose to rock snakeskin boots, belts, and, of course, snakeskin Kramers! The Baretta is a tribute to one of the most iconic and original guitar designs in rock. Features an alder body, satin-finished hard maple neck, a single Seymour Duncan® JB™ zebra-coil humbucker, and a Floyd Rose® 1000 series tremolo with an R2 1000 series locking nut. It also comes equipped with an EVH® D-Tuna® and a Floyd Rose LRT-L40 Trem Stop, and it is finished in an eye-catching Snakeskin Green Blue Fade. A premium gig bag is also included.
Serial Number: 21022901414
Weight: 8.0lbs
SKU: KBVRSBGDTBF3
Detailed Specifications
Body
Body Shape: Baretta
Body Material: Alder
Finish: Gloss Body, Satin Neck
Neck
Material: Maple
Profile: Kramer Thin Profile
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12.6"
Number Of Frets: 22
Frets: Jumbo
Nut Material: Floyd Rose R2 1000 Series Locking Nut with Black String Retaining Bar
Nut Width: 1.626"
Inlays: Black Dot
Joint: Bolt On
Hardware
Finish: Black
Tuner Plating: Black
Bridge: Floyd Rose 1000 Series Tremolo with LRT-L40 Trem Stop and EVH D-Tuna Drop D Tuning System
Tuning Machines: Mini Die Case
TrussRod: Dual Action
Truss Rod Cover: Black with Gold Print "Baretta"
Control Knobs: Black Chrome Knurled
Control Covers: Black
Strap Buttons: 2 - Bottom and Upper Horn
Mounting Rings: Black
Electronics
Bridge Pickup: Seymour Duncan JB
Controls: 500K Master Volume with Push/Pull Series/Parallel Switch
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Kramer Premium Gig Bag
Accessories: Black Wrench Holder - Back of Headstock
In many cultures, the lotus flower represents purity, enlightenment, regeneration, and rebirth. The Baretta “White Lotus” graphic was designed by Kramer Custom Graphic Artist Eric Caspers, who was inspired by movie underdogs from the 80s who overcame the odds to triumph in the end. The Baretta is a tribute to one of the most iconic and original guitar designs in rock. Features an alder body, satin-finished hard maple neck, a single Seymour Duncan® JB™ zebra-coil humbucker, and a Floyd Rose® 1000 series tremolo with an R2 1000 series locking nut. It also comes equipped with an EVH® D-Tuna® and a Floyd Rose LRT-L40 Trem Stop, and it is finished in an eye-catching White Lotus Candy Blue. A premium gig bag is also included.
Serial Number: 21092905232
Weight: 8.0lbs
SKU: KBVRLCBDTBF3
Detailed Specifications
Body
Body Shape: Baretta
Body Material: Alder
Finish: Gloss Body, Satin Neck
Neck
Material: Maple
Profile: Kramer Thin Profile
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12.6"
Number Of Frets: 22
Frets: Jumbo
Nut Material: Floyd Rose R2 1000 Series Locking Nut with Black String Retaining Bar
Nut Width: 1.626"
Inlays: Black Dot
Joint: Bolt On
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Floyd Rose 1000 Series Tremolo with LRT-L40 Trem Stop and EVH D-Tuna Drop D Tuning System
Tuning Machines: Mini Die Case
TrussRod: Dual Action
Truss Rod Cover: Black with Gold Print "Baretta"
Control Knobs: Black Chrome Knurled
Control Covers: Black
Strap Buttons: 2 - Bottom and Upper Horn
Mounting Rings: Black
Electronics
Bridge Pickup: Seymour Duncan JB
Controls: 500K Master Volume with Push/Pull Series/Parallel Switch
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Kramer Premium Gig Bag
Accessories: Black Wrench Holder - Back of Headstock
In many cultures, the lotus flower represents purity, enlightenment, regeneration, and rebirth. The Baretta “White Lotus” graphic was designed by Kramer Custom Graphic Artist Eric Caspers, who was inspired by movie underdogs from the 80s who overcame the odds to triumph in the end. The Baretta is a tribute to one of the most iconic and original guitar designs in rock. Features an alder body, satin-finished hard maple neck, a single Seymour Duncan® JB™ zebra-coil humbucker, and a Floyd Rose® 1000 series tremolo with an R2 1000 series locking nut. It also comes equipped with an EVH® D-Tuna® and a Floyd Rose LRT-L40 Trem Stop, and it is finished in an eye-catching White Lotus Candy Blue. A premium gig bag is also included.
Serial Number: 21022901400
Weight: 8.0lbs
SKU: KBVRLCBDTBF3
Detailed Specifications
Body
Body Shape: Baretta
Body Material: Alder
Finish: Gloss Body, Satin Neck
Neck
Material: Maple
Profile: Kramer Thin Profile
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12.6"
Number Of Frets: 22
Frets: Jumbo
Nut Material: Floyd Rose R2 1000 Series Locking Nut with Black String Retaining Bar
Nut Width: 1.626"
Inlays: Black Dot
Joint: Bolt On
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Floyd Rose 1000 Series Tremolo with LRT-L40 Trem Stop and EVH D-Tuna Drop D Tuning System
Tuning Machines: Mini Die Case
TrussRod: Dual Action
Truss Rod Cover: Black with Gold Print "Baretta"
Control Knobs: Black Chrome Knurled
Control Covers: Black
Strap Buttons: 2 - Bottom and Upper Horn
Mounting Rings: Black
Electronics
Bridge Pickup: Seymour Duncan JB
Controls: 500K Master Volume with Push/Pull Series/Parallel Switch
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Kramer Premium Gig Bag
Accessories: Black Wrench Holder - Back of Headstock
The Baretta Special from the Kramer Original Collection is a great way for new players to discover one of the most influential guitars in rock history at a price anyone can afford! Featuring a powerful Alnico 5 “zebra-coil” humbucker with a single volume control, a tone-rich mahogany body, maple neck, and a Kramer Traditional tremolo.
Serial Number: 21112902700
Weight: 7.0lbs
SKU: KPBSPRCT1
Detailed Specifications
Body
Body Shape: Baretta
Body Material: Mahogany
Neck
Material: Maple
Profile: Slim
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12"
Number Of Frets: 22
Frets: Medium Jumbo
Nut Material: PVC
Nut Width: 1.68"
Inlays: Black Dots
Joint: Bolt-on
Hardware
Finish: Nickel
Bridge: Kramer Traditional Tremolo
Tailpiece: Kramer Traditional Tremolo
Tuning Machines: Deluxe Die-Cast 14:1 ratio
Pickguard: None
TrussRod: Adjustable
Truss Rod Cover: Kramer Bullet with Baretta Special in White
The Kramer Charlie Parra Vanguard is the second Kramer signature model from the Peruvian metal master. Featuring a mahogany body, 3 piece satin-finished maple neck, bound ebony fretboard with 24 jumbo frets, dot inlays with 12th fret Day of the Dead owl, a single chrome knurled master volume control, and 3-way pickup selector switch mounted on a satin aluminum pickguard, EMG™ 57 and 66 pickups with chrome covers, a recessed output jack on the upper horn, and a LockTone™ Tune-O-Matic™ bridge and Stop Bar tailpiece. Charlie Parra's signature is engraved on the truss rod cover, and his signature Vanguard is finished in Candy Apple Red Gloss. Kramer premium gig bag included.
The Kramer Charlie Parra Vanguard is the second Kramer signature model from the Peruvian metal master. Featuring a mahogany body, 3-piece satin-finished maple neck, bound ebony fretboard with 24 jumbo frets, dot inlays with 12th fret Day of the Dead owl, a single chrome knurled master volume control, and 3-way pickup selector switch mounted on a satin aluminum pickguard, EMG™ 57 and 66 pickups with chrome covers, a recessed output jack on the upper horn, and a LockTone™ Tune-O-Matic™ bridge and Stop Bar tailpiece. Charlie Parra's signature is engraved on the truss rod cover, and his signature Vanguard is finished in Candy Apple Red Gloss. Kramer premium gig bag included.
Serial Number: 20122900256
Weight: 7.8lbs
Detailed Specifications
Body
Body Shape: Vanguard
Body Material: Mahogany
Finish: Gloss
Neck
Material: 3 piece Maple
Profile: Slim C
Scale Length: 24.724"
Fingerboard Material: Ebony
Fingerboard Radius: 12.6"
Number Of Frets: 24
Frets: Jumbo
Nut Material: Graph Tech®
Nut Width: 1.693"
Inlays: Dot and Day of the Dead owl at 12th fret
Joint: Bolt on
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: LockTone™ Tune-O-Matic™
Tailpiece: LockTone™ Stop Bar
Tuning Machines: Mini Die Cast
Pickguard: Satin Aluminum
TrussRod: Dual Action
Truss Rod Cover: Black bullet with Charlie Parra signature
The 1980s classic Kramer Jersey Star returns with the iconic Mother-of-Pearl Jersey Star logo, gold hardware, Seymour Duncan® JN™ and JB™ Humbuckers, and a Floyd Rose® 1000 Series Tremolo and R2 Lock Nut. Available in Alpine White and Candy Apple Red Gloss finishes. See your Authorized Kramer Dealer for details.
The Legendary Jersey Star Returns! First released in the 1980s, the Jersey Star is for many fans the ultimate Kramer. The modern Jersey Star features a double cutaway lightweight Alder body with the classic Jersey Star logo on the upper bout. The three-piece bolt-on Maple neck has an Elliptical “C” profile with a Maple fingerboard, 22 jumbo frets, a 16" radius, and a 25.5" scale. The neck has Jersey Star inlays with double stars at the 12th fret. The Floyd Rose® R2 Lock Nut is top mounted and the headstock matches the guitar finish.
Specifications
Body:Alder with double cutaway (star logo on upper bout)
Neck:3-piece Maple
Neck Style:Elliptical ‘C’ Profile
Neck Joint:Bolt Neck with Kramer Plate
Fingerboard:Maple
Fingerboard Radius:16"
Scale Length:25.5"
Nut:Floyd Rose® R2 Lock Nut with string retaining bar
Frets:22, Medium Jumbo
Inlay:Mother of Pearl Stars with double stars at 12th fret
Headstock:Kramer headstock with gold string retainer bar/gold wrench holder on back
Neck Pickup:Seymour Duncan® JN™
Middle Pickup:Seymour Duncan® JB™
Bridge Pickup:Seymour Duncan® JB™
Control:Master Volume, 5-way selector switch, 2 mini switch for coil-splitting rhythm (JN) and bridge pickup (JB)
Knob:Metal Knurled
Hardware:Chrome w/gold plating
Bridge & Tailpiece:Floyd Rose® 1000 Series Tremolo
Machine Heads:Die cast machine heads with pearloid buttons
Color:Alpine White, Candy Apple Red (Gloss finish)
The 1980s classic Kramer Jersey Star returns with the iconic Mother-of-Pearl Jersey Star logo, gold hardware, Seymour Duncan® JN™ and JB™ Humbuckers, and a Floyd Rose® 1000 Series Tremolo and R2 Lock Nut. Available in Alpine White and Candy Apple Red Gloss finishes. See your Authorized Kramer Dealer for details.
The Legendary Jersey Star Returns! First released in the 1980s, the Jersey Star is for many fans the ultimate Kramer. The modern Jersey Star features a double cutaway lightweight Alder body with the classic Jersey Star logo on the upper bout. The three-piece bolt-on Maple neck has an Elliptical “C” profile with a Maple fingerboard, 22 jumbo frets, a 16" radius, and a 25.5" scale. The neck has Jersey Star inlays with double stars at the 12th fret. The Floyd Rose® R2 Lock Nut is top mounted and the headstock matches the guitar finish.
Specifications
Serial Number: 19082902183
Weight: 9.2lbs
Body:Alder with double cutaway (star logo on upper bout)
Neck:3-piece Maple
Neck Style:Elliptical ‘C’ Profile
Neck Joint:Bolt Neck with Kramer Plate
Fingerboard:Maple
Fingerboard Radius:16"
Scale Length:25.5"
Nut:Floyd Rose® R2 Lock Nut with string retaining bar
Frets:22, Medium Jumbo
Inlay:Mother of Pearl Stars with double stars at 12th fret
Headstock:Kramer headstock with gold string retainer bar/gold wrench holder on back
Neck Pickup:Seymour Duncan® JN™
Middle Pickup:Seymour Duncan® JB™
Bridge Pickup:Seymour Duncan® JB™
Control:Master Volume, 5-way selector switch, 2 mini switch for coil-splitting rhythm (JN) and bridge pickup (JB)
Knob:Metal Knurled
Hardware:Chrome w/gold plating
Bridge & Tailpiece:Floyd Rose® 1000 Series Tremolo
Machine Heads:Die cast machine heads with pearloid buttons
Color:Alpine White, Candy Apple Red (Gloss finish)
Case:See Authorized Kramer Dealer
Warranty:Kramer Limited Lifetime Warranty
**Guitar has a small chip in neck pocket and has a few dents under the bridge ( See photos) Price has been discounted accordingly**
The legendary shred sled from the late 80s returns to the Kramer lineup. Featuring a double-cutaway mahogany body with a deep cut lower horn for unfettered access to all 24 jumbo frets, the NightSwan™ is powered by two Seymour Duncan® JB™ humbucking pickups and is ready for deep whammy bar dives with its Floyd Rose® 1000 Series tremolo and R2 locking nut. The ebony fingerboard has a 16" radius and features pearloid dot inlays in a distinctive "ping pong" pattern, while the back of the slim, C-shaped 3-piece hard maple neck is satin-finished, which makes it perfect for lightning-fast note flurries. This 'Swan has a gloss Jet Black Metallic finish, and is available in both right-hand and left-hand versions. An optional hardshell case is available.
Serial Number: 21012904200
Weight: 7.2 lbs
Detailed Specifications
Body
Body Shape: NightSwan
Body Material: Mahogany
Finish: Black Metallic (Gloss)
Neck
Material: 3-piece Hard Maple with Satin Finish
Profile: C-Shaped
Scale Length: 24.748"
Fingerboard Material: Ebony
Fingerboard Radius: 16"
Number Of Frets: 24
Frets: Jumbo
Nut Material: Floyd Rose R2 Lock Nut, Black
Nut Width: 1.625"
Inlays: White Pearloid Dots (size varies) in "Ping Pong" Configuration
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
Serial Number: 21081322178
Weight: 8.2lbs
Detailed Specifications
Body
Body Shape: Pacer
Body Material: Alder
Finish: Gloss
Neck
Material: Maple
Profile: K-Speed SlimTaper C
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12"
Number Of Frets: 22
Frets: Medium Jumbo
Nut Material: Licensed Floyd Rose R2 Lock Nut, Top Mount
Nut Width: 1.626"
Inlays: Dot
Joint: Bolt On with Chrome Plate
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Licensed Floyd Rose
Tuning Machines: Die Cast
TrussRod: Dual Action
Control Knobs: Chrome Knurled
Control Covers: White
Strap Buttons: 2
Mounting Rings: White
Electronics
Neck Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Bridge Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Controls: 2 Volume, Master Tone
Pickup Selector: 3-way Mini Toggle
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Optional hard case (940-KRSTCS, for right-handed guitars only), optional gig bag (940-KPGIGBAR) will fit both left and right-handed models.
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
Serial Number: 21081321973
Weight: 8.2lbs
Detailed Specifications
Body
Body Shape: Pacer
Body Material: Alder
Finish: Gloss
Neck
Material: Maple
Profile: K-Speed SlimTaper C
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12"
Number Of Frets: 22
Frets: Medium Jumbo
Nut Material: Licensed Floyd Rose R2 Lock Nut, Top Mount
Nut Width: 1.626"
Inlays: Dot
Joint: Bolt On with Chrome Plate
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Licensed Floyd Rose
Tuning Machines: Die Cast
TrussRod: Dual Action
Control Knobs: Chrome Knurled
Control Covers: White
Strap Buttons: 2
Mounting Rings: White
Electronics
Neck Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Bridge Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Controls: 2 Volume, Master Tone
Pickup Selector: 3-way Mini Toggle
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Optional hard case (940-KRSTCS, for right-handed guitars only), optional gig bag (940-KPGIGBAR) will fit both left and right-handed models.
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
Serial Number: 21111319498
Weight: 8.0lbs
Detailed Specifications
Body
Body Shape: Pacer
Body Material: Alder
Finish: Gloss
Neck
Material: Maple
Profile: K-Speed SlimTaper C
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12"
Number Of Frets: 22
Frets: Medium Jumbo
Nut Material: Licensed Floyd Rose R2 Lock Nut, Top Mount
Nut Width: 1.626"
Inlays: Dot
Joint: Bolt On with Chrome Plate
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Licensed Floyd Rose
Tuning Machines: Die Cast
TrussRod: Dual Action
Control Knobs: Chrome Knurled
Control Covers: White
Strap Buttons: 2
Mounting Rings: White
Electronics
Neck Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Bridge Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Controls: 2 Volume, Master Tone
Pickup Selector: 3-way Mini Toggle
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Optional hard case (940-KRSTCS, for right-handed guitars only), optional gig bag (940-KPGIGBAR) will fit both left and right-handed models.
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
Serial Number: 21091317971
Weight: 8.0lbs
SKU: KPCSRMCF1
Detailed Specifications
Body
Body Shape: Pacer
Body Material: Alder
Finish: Gloss
Neck
Material: Maple
Profile: K-Speed SlimTaper C
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12"
Number Of Frets: 22
Frets: Medium Jumbo
Nut Material: Licensed Floyd Rose R2 Lock Nut, Top Mount
Nut Width: 1.626"
Inlays: Dot
Joint: Bolt On with Chrome Plate
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Licensed Floyd Rose
Tuning Machines: Die Cast
TrussRod: Dual Action
Control Knobs: Chrome Knurled
Control Covers: White
Strap Buttons: 2
Mounting Rings: White
Electronics
Neck Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Bridge Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Controls: 2 Volume, Master Tone
Pickup Selector: 3-way Mini Toggle
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Optional hard case (940-KRSTCS, for right-handed guitars only), optional gig bag (940-KPGIGBAR) will fit both left and right-handed models.
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
Serial Number: 21101325543
Weight: 8.0lbs
SKU: KPCSRMCF1
Detailed Specifications
Body
Body Shape: Pacer
Body Material: Alder
Finish: Gloss
Neck
Material: Maple
Profile: K-Speed SlimTaper C
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12"
Number Of Frets: 22
Frets: Medium Jumbo
Nut Material: Licensed Floyd Rose R2 Lock Nut, Top Mount
Nut Width: 1.626"
Inlays: Dot
Joint: Bolt On with Chrome Plate
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Licensed Floyd Rose
Tuning Machines: Die Cast
TrussRod: Dual Action
Control Knobs: Chrome Knurled
Control Covers: White
Strap Buttons: 2
Mounting Rings: White
Electronics
Neck Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Bridge Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Controls: 2 Volume, Master Tone
Pickup Selector: 3-way Mini Toggle
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Optional hard case (940-KRSTCS, for right-handed guitars only), optional gig bag (940-KPGIGBAR) will fit both left and right-handed models.
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
Serial Number: 22061329156
Weight: 7.6lbs
SKU: KPCSRMCF1
Detailed Specifications
Body
Body Shape: Pacer
Body Material: Alder
Finish: Gloss
Neck
Material: Maple
Profile: K-Speed SlimTaper C
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12"
Number Of Frets: 22
Frets: Medium Jumbo
Nut Material: Licensed Floyd Rose R2 Lock Nut, Top Mount
Nut Width: 1.626"
Inlays: Dot
Joint: Bolt On with Chrome Plate
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Licensed Floyd Rose
Tuning Machines: Die Cast
TrussRod: Dual Action
Control Knobs: Chrome Knurled
Control Covers: White
Strap Buttons: 2
Mounting Rings: White
Electronics
Neck Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Bridge Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Controls: 2 Volume, Master Tone
Pickup Selector: 3-way Mini Toggle
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Optional hard case (940-KRSTCS, for right-handed guitars only), optional gig bag (940-KPGIGBAR) will fit both left and right-handed models.
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
Serial Number: 21081322292
Weight: 8.2lbs
Detailed Specifications
Body
Body Shape: Pacer
Body Material: Alder
Finish: Gloss
Neck
Material: Maple
Profile: K-Speed SlimTaper C
Scale Length: 25.5"
Fingerboard Material: Maple
Fingerboard Radius: 12"
Number Of Frets: 22
Frets: Medium Jumbo
Nut Material: Licensed Floyd Rose R2 Lock Nut, Top Mount
Nut Width: 1.626"
Inlays: Dot
Joint: Bolt On with Chrome Plate
Hardware
Finish: Chrome
Tuner Plating: Chrome
Bridge: Licensed Floyd Rose
Tuning Machines: Die Cast
TrussRod: Dual Action
Control Knobs: Chrome Knurled
Control Covers: White
Strap Buttons: 2
Mounting Rings: White
Electronics
Neck Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Bridge Pickup: Alnico 5 Classic Humbucker with Double White Exposed Coils
Controls: 2 Volume, Master Tone
Pickup Selector: 3-way Mini Toggle
Output Jack: 1/4"
Miscellaneous
Strings Gauge: .010 .013 .017 .026 .036 .046
Case: Optional hard case (940-KRSTCS, for right-handed guitars only), optional gig bag (940-KPGIGBAR) will fit both left and right-handed models.
The SM-1 H is an exciting new version of the SM-1 and an updated version of the original Kramer Stagemaster Mach II. It retains the neck-through, double-cutaway mahogany body, ebony fingerboard, and Floyd Rose® 1000 series tremolo and R2 1000 series locking nut of the original SM-1, but has simplified electronics consisting of a single volume control with push/pull series/parallel switching and a Seymour Duncan® JB™ humbucker™ in the bridge position. Available in Buzzsaw Gold, Shockwave Purple, and Tronius Silver, an optional hard case is available.
Serial Number: 21072900595
Weight: 6.8lbs
SKU: KSM1HSWPBF3
Detailed Specifications
Body
Body Shape: SM-1
Body Material: Mahogany
Finish: Gloss
Neck
Material: Mahogany
Profile: Kramer K-Speed SlimTaper C
Scale Length: 25.512"
Fingerboard Material: Ebony, White Binding
Fingerboard Radius: 12.6"
Number Of Frets: 24
Frets: Jumbo
Nut Material: Floyd Rose R2 Locking Nut; Top Mount
Nut Width: 1.626"
Inlays: Kramer Mini Headstocks, 12-fret Engraved Kramer
Joint: Neck-Through Body, Contoured Heel
Hardware
Finish: Black Chrome
Tuner Plating: Black Chrome
Bridge: Floyd Rose 1000 series Tremolo
Tuning Machines: Kramer Black Die Cast
TrussRod: Adjustable
Truss Rod Cover: 1 ply Black Bullet, 1 Screw, SM-1H in White
Control Knobs: Black Metal Knurled
Control Covers: Black
Strap Buttons: 2 - Bottom and Upper Horn
Mounting Rings: Black
Electronics
Bridge Pickup: Seymour Duncan JB
Controls: Master Volume with Push/Pull Series/Parallel Switch
The Tracii Guns "Gunstar" Voyager is ready to rock and is the first Kramer signature model for the L.A. Guns guitarist. The Gunstar features a star-shaped mahogany Voyager body with a Black Metallic finish and flame graphics, a 3 piece set maple neck with a Slim C profile, and a classic Kramer pointy headstock with a Kramer Pyramid logo on the front and a chrome wrench holder on the back, two Epiphone™ ProBucker™ pickups, each with its own volume control and coil-splitting push / pull switch for broad tonal flexibility, and a Floyd Rose® 1000 series tremolo and top-mounted R2 Locking Nut. A Kramer premium gig bag is included.