$ 379.00 $ 474.00
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
$ 379.00 $ 474.00
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
$ 379.00 $ 474.00
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
$ 379.00 $ 474.00
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
$ 379.00 $ 474.00
The Pacer Classic is part of Kramer's Original Collection and is a superb tribute to the original 1982 Kramer that knocked the guitar world for a loop. The Pacer Classic is built for speed, with a 25.5" scale maple neck with a Kramer K-Speed SlimTaper™ C profile and 22 medium jumbo frets. The Pacer Classic has chrome hardware, an alder double-cutaway body, a pair of double white, open-coil Alnico Classic 5 humbuckers™, and a licensed Floyd Rose® Tremolo bridge and R2 Locking Nut. Available in Radio Blue Metallic, Scarlet Red Metallic, and Purple Passion Metallic gloss finishes. An optional hardshell case is available.
$ 999.00 $ 1,250.00
The SM-1 H is an exciting new version of the SM-1 and an updated version of the original Kramer Stagemaster Mach II. It retains the neck-through, double-cutaway mahogany body, ebony fingerboard, and Floyd Rose® 1000 series tremolo and R2 1000 series locking nut of the original SM-1, but has simplified electronics consisting of a single volume control with push/pull series/parallel switching and a Seymour Duncan® JB™ humbucker™ in the bridge position. Available in Buzzsaw Gold, Shockwave Purple, and Tronius Silver, an optional hard case is available.
$ 899.00 $ 1,124.00
The Tracii Guns "Gunstar" Voyager is ready to rock and is the first Kramer signature model for the L.A. Guns guitarist. The Gunstar features a star-shaped mahogany Voyager body with a Black Metallic finish and flame graphics, a 3 piece set maple neck with a Slim C profile, and a classic Kramer pointy headstock with a Kramer Pyramid logo on the front and a chrome wrench holder on the back, two Epiphone™ ProBucker™ pickups, each with its own volume control and coil-splitting push / pull switch for broad tonal flexibility, and a Floyd Rose® 1000 series tremolo and top-mounted R2 Locking Nut. A Kramer premium gig bag is included.
Serial Number: 21062903952
Weight: 7.4lbs
$ 1,750.00
**This guitar is used and in excellent condition. Little to no signs of wear can be found on the guitar. Comes with a hardshell case. The price has been adjusted accordingly.
Serial Number: 138076
Weight: 6.8
Made in the USA!
BODY:
• Single-piece ultra-light Swamp Ash body
• Traced from 1953 Blackguard
NECK/FRETBOARD DETAILS:
• Single piece Rock Maple neck
• Fast Playing “Slim-C” Neck
• 25.5" Scale Length
• First Fret 0.825” - 12th Fret 0.875”
• 1 & 11/16 Nut Width
• CNC Machined Compound Radius. 9.5” Radius at the nut, 14” Radius at the 20th Fret
• Dual Action Truss Rod w/ Spoke Nut Adjustment at Body
• Indian Rosewood Fretboard w/MOP Dots
• High-Density Bone Nut
NECK JOINT:
• Traditional 1950s Deep Pocket Bolt-On.
• Stainless Steel Threaded Neck Inserts / Stainless Steel Neck Screws
• Neck Angle Machined into Neck Pocket/Heel for Perfect Saddle Height
FINISH:
• Hand-sprayed ultra-high sheen gloss pure acrylic body
• “Super-Satin” hand rubbed satin finish neck
• Matching color headstock
HARDWARE:
• Gotoh SDS 510 Nickel Tuners w/ CARD system (Made in Japan)
• Polished Stainless steel Larrivée bridge plate (Made in USA)
• Stainless Steel String Ferrules (Made in USA)
• Stainless steel "extra thick" neck plate (Made in USA)
• Custom stainless steel polished control plate. Volume knob further from switch. (Made in USA)
• Compensated large barrel brass Larrivée saddle (Made in USA)
• Stainless steel threaded neck inserts & neck screws (Made in USA)
• Compensated large barrel brass Larrivée saddle (Made in USA)
• Stainless steel threaded neck inserts & neck screws
• Dual-action truss rod w/ easy access spoke wheel adjustment
•Nickel-silver medium fret wire
LARRIVÉE PICKUPS:
• Yarn-wrapped AlNiCo 5 large pole bridge - Potted to prevent feedback
• Custom Alnico 6 neck pickup potted w. nickel silver cover
• Pickups connected RWRP for humbucking when played in center switch position
• Pickups wound with vintage 43 gauge plain enamel
• Cloth pushback wire leads
ELECTRONICS:
• Traditional CRL 3-way switch
• Custom Bourns "low-drag" 250 audio taper pot
• Custom Bourns "low-drag" 300k linear taper pot
• Vintage paper-in-coil capacitor (0.047uf)
• Puretone jack w/ 4 contact points mounted in Electrosocket jack mount
• 50s style wiring
Sold Out
This guitar is in very good condition. Light wear on back of guitar. Comes with OHSC. It is a very early model of McNaught's Phoenix Rising guitars.
Serial Number: 114
Weight: 7.2lbs
Specifications
$ 1,750.00
**This guitar is used and in good condition, especially when considering its age. There are signs of wear throughout the guitar and a chip on a tuner as well as deformation in another tuner (see attached pictures). Comes with an unoriginal case. The price has been adjusted accordingly.
Condition | Good |
Brand |
|
Model |
|
Finish |
|
Categories |
|
Year |
|
Made In |
|
Body Type |
|
$ 1,000.00
SPECS
Carved Mahogany body
Flame maple veneer
Exclusive radial neck joint
Maple neck
Ebony fingerboard
Seymour Duncan USM HB102 pickups
3-Way Pickup selector
Parker Vibrato System
Locking Tuners
25.5" Scale
Gloss Finish
**This guitar is used in good condition, Guitar has a dent on the lower left side of body and on the back of body has to line dents and a couple scratches on the right lower side of body (See Photos)**
Also trem bar is missing.
$ 5,840.00
“I don’t just like the newest version of my guitar, I love it. With these new pickups, I can move from a strong bridge pickup to a very clear, “whoopy” neck pickup – you can hear every note – by just setting the mini-toggles and using the 3-way as normal. It’s a highly musical and very usable setup. This guitar has clear, spanky single coils when you split the pickups but a very full soapbar quality when they are in humbucking mode. It’s just beautiful.” - Paul Reed Smith
Historically, the Paul’s Guitar (like the Modern Eagle before it) has been a realization of Paul Reed Smith’s latest discoveries surrounding tone. Paul specified every appointment of this instrument from the wood selection and inlay design to the pickups. This revamped model represents Paul’s vision not only as a guitar maker but as a guitar player who needs versatile stage- and studio-ready gear that can achieve all the right tones. As a man who has every option available to him, Paul’s personal design choices include mahogany bodies with maple tops, Honduran rosewood fretboards, Nitrocellulose finishes, “Brushstroke” bird inlays, and narrow pickup bobbins. The Paul’s Guitar model also includes PRS’s TCI (Tuned Capacitance and Inductance) treble and bass pickups with two mini-toggle switches that allow players to put either or both pickups in either humbucking or true single coil mode.
Serial Number: 0386553
Weight: 7.4 lbs
BODY | |
Body Construction | Solidbody |
Top Wood | Maple |
Back Wood | Mahogany |
Top Carve | Violin |
NECK | |
Number of Frets | 22 |
Scale Length | 25" |
Neck Wood | Mahogany |
Neck Construction | One-Piece |
Truss Rod | PRS Double-Acting |
Neck Shape | Pattern |
Neck Depth at the 1/2 Fret | 7/8" |
Neck Depth at the 12 1/2 Fret | 61/64" |
Neck Width at the Nut | 1 11/16" |
Neck Width at the Body | 2 1/4" |
Fretboard Wood | Honduran Rosewood |
Fretboard Radius | 10" |
Fretboard Inlay | Brushstroke Birds |
Headstock Logo | Signature, Inlaid |
NECK/BODY ASSEMBLY | |
Neck/Body Assembly Type | Set |
FINISH | |
Finish Type | High-Gloss Nitro |
HARDWARE | |
Bridge | PRS Stoptail w/ Brass Inserts |
Tuners | PRS Phase III Non-Locking Tuners with Wing Buttons |
Hardware Type | Nickel |
Nut | Bone |
Truss Rod Cover | Blank |
ELECTRONICS | |
Treble Pickup | TCI |
Bass Pickup | TCI |
Controls | Volume & Tone Control w/ 3-Way Toggle Pickup Switch and Two Mini Toggle Coil-Tap Pickup Switches |
ADDITIONAL INFO | |
Strings | PRS Signature 10-46 |
Tuning | Standard (6 String): E, A, D, G, B, E |
Case | Hardshell Case |
Options | 10 Top with Hybrid Hardware |
$ 5,840.00
“I don’t just like the newest version of my guitar, I love it. With these new pickups, I can move from a strong bridge pickup to a very clear, “whoopy” neck pickup – you can hear every note – by just setting the mini-toggles and using the 3-way as normal. It’s a highly musical and very usable setup. This guitar has clear, spanky single coils when you split the pickups but a very full soapbar quality when they are in humbucking mode. It’s just beautiful.” - Paul Reed Smith
Historically, the Paul’s Guitar (like the Modern Eagle before it) has been a realization of Paul Reed Smith’s latest discoveries surrounding tone. Paul specified every appointment of this instrument from the wood selection and inlay design to the pickups. This revamped model represents Paul’s vision not only as a guitar maker but as a guitar player who needs versatile stage- and studio-ready gear that can achieve all the right tones. As a man who has every option available to him, Paul’s personal design choices include mahogany bodies with maple tops, Honduran rosewood fretboards, Nitrocellulose finishes, “Brushstroke” bird inlays, and narrow pickup bobbins. The Paul’s Guitar model also includes PRS’s TCI (Tuned Capacitance and Inductance) treble and bass pickups with two mini-toggle switches that allow players to put either or both pickups in either humbucking or true single coil mode.
Serial Number: 0394715
Weight: 6.8 lbs
BODY | |
Body Construction | Solidbody |
Top Wood | Maple |
Back Wood | Mahogany |
Top Carve | Violin |
NECK | |
Number of Frets | 22 |
Scale Length | 25" |
Neck Wood | Mahogany |
Neck Construction | One-Piece |
Truss Rod | PRS Double-Acting |
Neck Shape | Pattern |
Neck Depth at the 1/2 Fret | 7/8" |
Neck Depth at the 12 1/2 Fret | 61/64" |
Neck Width at the Nut | 1 11/16" |
Neck Width at the Body | 2 1/4" |
Fretboard Wood | Honduran Rosewood |
Fretboard Radius | 10" |
Fretboard Inlay | Brushstroke Birds |
Headstock Logo | Signature, Inlaid |
NECK/BODY ASSEMBLY | |
Neck/Body Assembly Type | Set |
FINISH | |
Finish Type | High-Gloss Nitro |
HARDWARE | |
Bridge | PRS Stoptail w/ Brass Inserts |
Tuners | PRS Phase III Non-Locking Tuners with Wing Buttons |
Hardware Type | Nickel |
Nut | Bone |
Truss Rod Cover | Blank |
ELECTRONICS | |
Treble Pickup | TCI |
Bass Pickup | TCI |
Controls | Volume & Tone Control w/ 3-Way Toggle Pickup Switch and Two Mini Toggle Coil-Tap Pickup Switches |
ADDITIONAL INFO | |
Strings | PRS Signature 10-46 |
Tuning | Standard (6 String): E, A, D, G, B, E |
Case | Hardshell Case |
Options | 10 Top with Hybrid Hardware |
$ 2,499.99 $ 2,999.99
HP® 2 Deep Ocean Electric Guitar
The Peavey® HP® 2 is constructed with leading-edge technology, traditional handcrafted methods, professional-quality upgrades, and customizations. When a guitar bears the initials of Peavey founder and CEO Hartley Peavey, players can expect an iconic design with its own unique flair.
While the esthetic is classic, the HP 2 undoubtedly stands out with its carved top and offset, asymmetrical body design that offers comfort, proper balance, and maximum playing ease. Maple was chosen for the top and basswood for the back. We selected these hardwoods not only for their natural beauty and weight characteristics, but also for their specific tonal qualities. Cream edge binding accents the body.
At the select birdseye maple neck and fingerboard, players will find unmatched stability and playability. Dual graphite reinforcement bars and an easy-access, adjustable steel torsion rod provide additional strength, as does the bolt-on construction with contoured neck heel. The oil-finished fingerboard is cut from the same piece of wood as the single-piece neck, keeping the color and grain patterns consistent. The stress-relieved lamination also adds increased stability. The HP 2 has a 25 ½" scale length, 22 jumbo frets and 15" fingerboard radius. The 10-degree tilt-back headstock has a 3+3 tuning machine configuration featuring Schaller® tuning machines with pearloid buttons. The chrome-plated hardware finish completes the look.
The HP 2's construction and electronics work in harmony. Two custom-wound Peavey humbucking pickups supply optimal output and tonal response. They're made using a two-step wax-dipping process that provides ultra-low noise operation and resistance to microphonic feedback. The pickups are mounted directly to the body, further reducing feedback at high volume levels and enhancing response. A Switchcraft® 3-way toggle switch allows selection of pickups in up, center and down configurations. Players will also find a Peavey/Floyd Rose®licensed, double-locking tremolo assembly to complete the guitar. Finishing off the guitar are two push-pull knobs for volume and tone, with the ability to split the pickups individually.
$ 3,999.99
1992 PRS Custom 24. Very clean example with minimal wear/light scratches on the back. Very small chips in finish, one on the headstock and the others on the back side/heel of the neck (see photos).
Specifications
Sold Out
This guitar is in excellent condition, virtually no wear on body, neck, or hardware. Comes with OHSC.
Serial Number: 128945
Weight: 7.6 lbs
$ 6,850.00
Presale for Limited Edition 40th Anniversary Custom 24. Photos are stock, not actual guitar that will be coming in.
Celebrating The One That Started It All
Introducing the 40th Anniversary Custom 24 Limited Edition, celebrating four decades of PRS Guitars. Limited to 400 pieces worldwide, this special edition features both tra- ditional design features and new appointments, making it an essential piece for serious musicians and collectors alike.
Built on the tried-and-true foundation of a mahogany back and neck with artist grade maple top, the 40th Anniversary Custom 24 boasts a retro violin top carve, PRS “Old School” birds with outlines, and PRS “Pre-Factory” headstock eagle, all of which pay homage to early PRS guitars. Outside of these aesthetic attributes, the 40th Anniversary Custom 24 is looking ahead with its all-new PRS DMO Treble and Bass pickups. DMO pick- ups (DMO standing for Dynamic, Musical, Open) were spec’d by Paul Reed Smith and the PRS New Products Engineering team to have a wide open sound with vocal character. Other classic Custom 24 appointments include the PRS Gen III patented tremolo, PRS Phase III locking tuners with wing buttons, and PRS Signature 10-46 strings. This limited edition also features a ziricote fretboard and headstock veneer.
This commemorative run kicks off a year-long 40th Anniversary celebration for PRS Guitars. Only 400 of this 40th Anniversary Custom 24 Limited Edition will be available. Hand-signed 40th Anniversary certificate included.
Specifications
BODY
NECK
NECK/BODY ASSEMBLY
FINISH
HARDWARE
ELECTRONICS
ADDITIONAL INFORMATION
FINISHES
$ 6,850.00
Presale for Limited Edition 40th Anniversary Custom 24. Photos are stock, not actual guitar that will be coming in.
Celebrating The One That Started It All
Introducing the 40th Anniversary Custom 24 Limited Edition, celebrating four decades of PRS Guitars. Limited to 400 pieces worldwide, this special edition features both tra- ditional design features and new appointments, making it an essential piece for serious musicians and collectors alike.
Built on the tried-and-true foundation of a mahogany back and neck with artist grade maple top, the 40th Anniversary Custom 24 boasts a retro violin top carve, PRS “Old School” birds with outlines, and PRS “Pre-Factory” headstock eagle, all of which pay homage to early PRS guitars. Outside of these aesthetic attributes, the 40th Anniversary Custom 24 is looking ahead with its all-new PRS DMO Treble and Bass pickups. DMO pick- ups (DMO standing for Dynamic, Musical, Open) were spec’d by Paul Reed Smith and the PRS New Products Engineering team to have a wide open sound with vocal character. Other classic Custom 24 appointments include the PRS Gen III patented tremolo, PRS Phase III locking tuners with wing buttons, and PRS Signature 10-46 strings. This limited edition also features a ziricote fretboard and headstock veneer.
This commemorative run kicks off a year-long 40th Anniversary celebration for PRS Guitars. Only 400 of this 40th Anniversary Custom 24 Limited Edition will be available. Hand-signed 40th Anniversary certificate included.
Specifications
BODY
NECK
NECK/BODY ASSEMBLY
FINISH
HARDWARE
ELECTRONICS
ADDITIONAL INFORMATION
FINISHES
$ 2,629.00 $ 3,260.00
Since the dawn of rock and roll, the snap and response that comes from a bolt-on neck guitar has been an essential part of the mix. These attributes have, in turn, become essential to many players trying to tell their story through music. The CE 24 pairs PRS’s traditional body combination of the mahogany back and maple top with a bolt-on maple neck and rosewood fretboard. The neck sports a Pattern Thin carve and satin nitro finish for a natural, addictive feel. To further maximize the guitar’s inherent tone and clarity, the CE 24 features PRS 85/15 pickups, which Paul designed to have remarkable clarity as well as extended high and low end. The electronics consist of a volume and push/pull tone control with 3-way toggle switch for a total of six classic sounds.
The original CE was introduced in 1988 and offered players PRS design and quality with the added snap and sparkle of traditional bolt-on guitars.
BODY | |
Body Construction | Solidbody |
Top Wood | Maple |
Back Wood | Mahogany |
Top Carve | Violin |
Finish | High Gloss Nitro |
NECK | |
Number of Frets | 24 |
Scale Length | 25" |
Neck Wood | Maple |
Neck Construction | Scarfed |
Truss Rod | PRS Double-Acting |
Neck Shape | Pattern Thin |
Neck Depth at the 1/2 Fret | 53/64" |
Neck Depth at the 12 1/2 Fret | 57/64" |
Neck Width at the Nut | 1 11/16" |
Neck Width at the Body | 2 1/4" |
Fretboard Wood | Rosewood |
Fretboard Radius | 10" |
Fretboard Inlay | Birds |
Headstock Logo | Signature, Decal |
NECK/BODY ASSEMBLY | |
Neck/Body Assembly Type | Bolt-On |
HARDWARE | |
Bridge | PRS Patented Tremolo, Molded |
Tuners | PRS Low Mass Locking |
Hardware Type | Nickel |
Nut | PRS |
Truss Rod Cover | "CE" |
ELECTRONICS | |
Treble Pickup | 85/15 |
Bass Pickup | 85/15 |
Controls | Volume and Push/Pull Tone Control w/ 3-Way Toggle Pickup Switch |
ADDITIONAL INFO | |
Strings | PRS Signature 10-46 |
Tuning | Standard (6 String): E, A, D, G, B, E |
Case | Gig Bag |
$ 2,799.00 $ 3,480.00
This unique CE 24 Semi-Hollow features some awesome upgrades such as an Ebony fretboard, PRS 57/08 pickups, and the custom color “Lake Blue” which is not available on this model!
BODY | |
---|---|
Body Construction | Semi-Hollow Body with Single F-Hole |
Top Wood | Maple |
Back Wood | Mahogany |
Top Carve | Violin |
NECK | |
---|---|
Number of Frets | 24 |
Scale Length | 25" |
Neck Wood | Maple |
Neck Construction | Scarfed |
Truss Rod | PRS Double-Acting |
Neck Shape | Pattern Thin |
Neck Depth At The Nut | 53/64" |
Width Of Fretboard At The Nut | 1 11/16" |
Width Of Fretboard At The Body | 2 1/4" |
Fretboard Wood | Ebony |
Fretboard Radius | 10" |
Fretboard Inlay | Birds |
Headstock Logo | Signature, Decal |
NECK/BODY ASSEMBLY | |
---|---|
Neck/Body Assembly Type | Bolt-On |
HARDWARE | |
---|---|
Bridge | PRS Patented Tremolo, Molded |
Tuners | PRS Low Mass Locking |
Hardware Type | Nickel |
Nut | PRS |
Truss Rod Cover | "CE" |
ELECTRONICS | |
---|---|
Treble Pickup | 57/08 |
Middle Pickup | |
Bass Pickup | 57/08 |
Controls | Volume and Push/Pull Tone Control w/ 3-Way Toggle Switch |
ADDITIONAL INFO | |
---|---|
Strings | PRS Signature 10-46 |
Tuning | Standard (6 String): E, A, D, G, B, E |
Case | Gigbag |
$ 2,799.00 $ 3,380.00
Combining the snap and sustain of a bolt-on guitar with the airy resonance of a semi-hollow body, the CE 24 Semi-Hollow is a truly unique addition to the PRS Bolt-On lineup. The body pairs the traditional combination of a mahogany back and maple top with a bolt-on maple neck and rosewood fretboard. The neck features a Pattern Thin carve and satin nitro finish for a natural, addictive feel. The electronics consist of a volume and push/pull tone control with a 3-way toggle switch, giving a total of six classic sounds from the PRS 85/15 pickups.
The original CE was introduced in 1988, offering players traditional PRS design and quality with the added snap and sparkle of a bolt-on guitar.
BODY | |
---|---|
Body Construction | Semi-Hollow Body with Single F-Hole |
Top Wood | Maple |
Back Wood | Mahogany |
Top Carve | Violin |
NECK | |
---|---|
Number of Frets | 24 |
Scale Length | 25" |
Neck Wood | Maple |
Neck Construction | Scarfed |
Truss Rod | PRS Double-Acting |
Neck Shape | Pattern Thin |
Neck Depth At The Nut | 53/64" |
Width Of Fretboard At The Nut | 1 11/16" |
Width Of Fretboard At The Body | 2 1/4" |
Fretboard Wood | Rosewood |
Fretboard Radius | 10" |
Fretboard Inlay | Birds |
Headstock Logo | Signature, Decal |
NECK/BODY ASSEMBLY | |
---|---|
Neck/Body Assembly Type | Bolt-On |
HARDWARE | |
---|---|
Bridge | PRS Patented Tremolo, Molded |
Tuners | PRS Low Mass Locking |
Hardware Type | Nickel |
Nut | PRS |
Truss Rod Cover | "CE" |
ELECTRONICS | |
---|---|
Treble Pickup | 85/15 |
Middle Pickup | |
Bass Pickup | 85/15 |
Controls | Volume and Push/Pull Tone Control w/ 3-Way Toggle Switch |
ADDITIONAL INFO | |
---|---|
Strings | PRS Signature 10-46 |
Tuning | Standard (6 String): E, A, D, G, B, E |
Case | Gigbag |
$ 2,699.00 $ 2,980.00
Since the dawn of rock and roll, the snap and response that comes from a bolt-on neck guitar has been an essential part of the mix. These attributes have, in turn, become essential to many players trying to tell their story through music. The CE 24 pairs PRS’s traditional body combination of the mahogany back and maple top with a bolt-on maple neck and rosewood fretboard. The neck sports a Pattern Thin carve and satin nitro finish for a natural, addictive feel. To further maximize the guitar’s inherent tone and clarity, the CE 24 features PRS 85/15 pickups, which Paul designed to have remarkable clarity as well as extended high and low end. The electronics consist of a volume and push/pull tone control with 3-way toggle switch for a total of six classic sounds.
The original CE was introduced in 1988 and offered players PRS design and quality with the added snap and sparkle of traditional bolt-on guitars.
Serial Number: 0334270
Weight: 7.0lbs
BODY | |
---|---|
Body Construction | Solidbody |
Top Wood | Maple |
Back Wood | Mahogany |
Top Carve | Violin |
NECK | |
---|---|
Number of Frets | 24 |
Scale Length | 25" |
Neck Wood | Maple |
Neck Construction | Scarfed |
Truss Rod | PRS Double-Acting |
Neck Shape | Pattern Thin |
Neck Depth At The Nut | 53/64" |
Neck Of Fretboard At The Nut | 1 11/16" |
Neck Of Fretboard At The Body | 2 1/4" |
Fretboard Wood | Rosewood |
Fretboard Radius | 10" |
Fretboard Inlay | Birds |
Headstock Logo | Signature, Decal |
NECK/BODY ASSEMBLY | |
---|---|
Neck/Body Assembly Type | Bolt-On |
HARDWARE | |
---|---|
Bridge | PRS Patented Tremolo, Molded |
Tuners | PRS Low Mass Locking |
Hardware Type | Nickel |
Nut | PRS |
Truss Rod Cover | "CE" |
ELECTRONICS | |
---|---|
Treble Pickup | 85/15 |
Bass Pickup | 85/15 |
Controls | Volume and Push/Pull Tone Control with 3-Way Toggle Pickup Switch |
ADDITIONAL INFO | |
---|---|
Strings | PRS Signature 10-46 |
Tuning | Standard (6 String): E, A, D, G, B, E |
Case | Gigbag |
$ 5,320.00 $ 6,600.00
The Custom 24 is the quintessential PRS guitar. This iconic instrument was the first model that Paul Reed Smith brought to the public at PRS Guitars’ first Winter NAMM show in 1985 and has been a top seller ever since. Played by internationally touring artists, gigging musicians, and aspiring players, the Custom 24 features PRS’s patented Gen IIII tremolo system and PRS 85/15 pickups with volume and tone controls and a 5-way blade switch. 85/15 pickups were personally designed by Paul Reed Smith to offer remarkable clarity and extended high and low end.
The Custom 24 is the original PRS. Since its introduction, it has offered a unique tonal option for serious players and defined PRS tone and playability.
BODY | |
---|---|
Body Construction | Solidbody |
Top Wood | Maple |
Back Wood | Mahogany |
Top Carve | Violin |
NECK | |
---|---|
Number of Frets | 24 |
Scale Length | 25" |
Neck Wood | Mahogany |
Neck Construction | One-Piece |
Truss Rod | PRS Double-Acting |
Neck Shape | Pattern Thin |
Neck Depth At The Nut | 53/64" |
Width Of Fretboard At The Nut | 1 11/16" |
Width Of Fretboard At The Body | 2 1/4" |
Fretboard Wood | Rosewood |
Fretboard Radius | 10" |
Fretboard Inlay | Birds |
Headstock Logo | Signature, Inlaid |
NECK/BODY ASSEMBLY | |
---|---|
Neck/Body Assembly Type | Set |
HARDWARE | |
---|---|
Bridge | PRS Patented Tremolo, Gen III |
Tuners | PRS Phase III Locking |
Hardware Type | Nickel |
Nut | PRS |
Truss Rod Cover | "Custom" |
ELECTRONICS | |
---|---|
Treble Pickup | 85/15 |
Bass Pickup | 85/15 |
Controls | Volume and Tone Control with 5-Way Blade Switch |
ADDITIONAL INFO | |
---|---|
Strings | PRS Signature 10-46 |
Tuning | Standard (6 String): E, A, D, G, B, E |
Case | Hardshell Case |
Options | 10 Top with Hybrid Hardware |
$ 5,490.00 $ 6,660.00
The Custom 24 is the original PRS. Since its introduction, it has offered a unique tonal option for serious players and defined PRS tone and playability.
For 2024, PRS Guitars is updating the tuning machines on many of our Core guitars. While, aesthetically, our new Wing buttons are designed to echo the 12th fret bird wingspan design, they were first and foremost designed for tonal reasons all the way back in 1982. Because these buttons are lighter weight than their metal predecessors, they are subtracting less energy from the vibrating strings, thus helping the guitar ring longer and at a more musical note.
BODY | |
Body Construction | Solidbody |
Top Wood | Maple |
Back Wood | Mahogany |
Top Carve | Violin |
NECK | |
Number of Frets | 24 |
Scale Length | 25" |
Neck Wood | Mahogany |
Neck Construction | One-Piece |
Truss Rod | PRS Double-Acting |
Neck Shape | Pattern Thin |
Neck Depth at the 1/2 Fret | 53/64" |
Neck Depth at the 12 1/2 Fret | 57/64" |
Neck Width at the Nut | 1 11/16" |
Neck Width at the Body | 2 1/4" |
Fretboard Wood | Rosewood |
Fretboard Radius | 10" |
Fretboard Inlay | Birds |
Headstock Logo | Signature, Inlaid |
NECK/BODY ASSEMBLY | |
Neck/Body Assembly Type | Set |
FINISH | |
Finish Type | High-Gloss Nitro |
HARDWARE | |
Bridge | PRS Patented Tremolo, Gen III |
Tuners | PRS Phase III Locking Tuners with Wing Buttons |
Hardware Type | Nickel |
Nut | PRS |
Truss Rod Cover | "Custom" |
ELECTRONICS | |
Treble Pickup | 85/15 |
Bass Pickup | 85/15 |
Controls | Volume and Tone Control with 5-Way Blade Pickup Switch |
ADDITIONAL INFO | |
Strings | PRS Signature 10-46 |
Tuning | Standard (6 String): E, A, D, G, B, E |
Case | Hardshell Case |
Options | 10 Top with Hybrid Hardware |