Guitar Amplifiers

Mesa Boogie 2X12 Open Back 16 Ohm Guitar Amplifier Cabinet USED - Crimson Snake

Sold Out

This cabinet is in excellent condition. No wear on tolex, grill cloth, or controls

If shipping to lower 48 shipping cost is $250.00.

Specfications

Style: Open Back
Speaker Configuration: 2X12"
Speakers: Celestion Black Shadow
Input: 1/4" Mono

Marshall ST112 Studio JTM 1X12 Guitar Amplifier Cabinet

$ 1,099.99 $ 1,480.00

The ST112 brings the iconic tone that sprung Marshall to the forefront of rock ’n’ roll in the 60s to today. This 1x12" cab has been designed to be paired with the ST20H to create a small but perfectly formed vintage rig, or used as an extension cab for the ST20C. It is handmade in the same UK factory that has been manufacturing Marshall amps since the late 60s, built on decades of experience with expert craftsmanship at the very heart. The smaller scale of the ST112 gives players the power of the authentic Marshall tone, in a more compact design. With Creamback Celestion speakers, this cab offers that definitive vintage tone.

Specifications

GENERAL

Model: ST112
Range: Studio
Technology: Valve
Channels: 1 with 2 voicings

ELECTRONICS

Inputs: 1

SPEAKERS

Speaker configuration: 1x12"
Power handling: 65W
Speaker model: Celestion G12M-65 Creamback (16Ω, 65W)
Unit impedance: 16Ω

Marshall ST20H Studio JTM 20W Guitar Amplifier Head

$ 1,749.99 $ 2,350.00

The unrivalled number one is here, just smaller. Reproducing the legendary, warm and smooth tones of the original Marshall JTM, the Studio JTM packs a punch. Swap between 20W and 5W at the flick of a switch and let the era-defining sound of the JTM steal the show, whether it’s playing at home, or on stage. Make sure to pair the ST20H with one of our Studio cabinets for a small but perfectly formed Marshall rig.

Specifications

GENERAL

Model: ST20H
Range: Studio
Technology: Valve
Channels: 1 with 2 voicings

ELECTRONICS

Output wattage: 20W (with power reduction option to 5W)
Outputs: 5 x 1/4” jack sockets (16Ω load / 8Ω load / 4Ω load)
Inputs: 4 x 1/4" jack instrument inputs (high/low sensitivity)
Controls: Treble, Middle, Bass and Presence
Effects: None
Effects loop: Yes, send/return

VALVES

Preamp valves: 2 x ECC83, 1 x ECC83 (phase splitter)
Power amp valves: 2 x 5881

ACCESSORIES

Cable: Detachable power cable included
Cable: Speaker cable included

Marshall Studio JTM ST20C 20W 1X12" Combo Guitar Amplifier

$ 1,949.99 $ 2,650.00

The first JTM amp created a legendary sound that inspired generations of musicians. In honour of that, the ST20C brings the iconic 60’s tone that initially launched Marshall to the present day, in a more compact format.

Whether you’re at home, in the studio, or on the big stage – the ST20C can adapt to bring exceptional tone to any situation with built-in power reduction technology, enabling players to switch between 20W and 5W.

SPECIFICATION

GENERAL

Model: ST20C
Range: Studio
Technology: Valve
Channels: 1 with 2 voicings

ELECTRONICS

Output wattage: 20W (with power reduction option to 5W)
Outputs: DI output and 5 x 1/4” speaker outputs (16Ω load / 8Ω load / 4Ω load)
Inputs: 4 x 1/4" jack instrument inputs (high/low sensitivity)
Controls: Treble, Middle, Bass and Presence
Effects: None
Effects loop: Yes, send/return

SPEAKERS

Speaker configuration: 1x12”
Power handling: 65W
Speaker model: Celestion G12M-65 Creamback (16Ω, 65W)
Unit impedance: 16Ω

VALVES

Preamp valves: 2 x ECC83, 1 x ECC83 (phase splitter)
Power amp valves: 2 x 5881

ACCESSORIES

Cable: Detachable power cable included

Marshall ST212 Studio JTM 2x12 Guitar Amplifier Cabinet

$ 1,399.99 $ 1,850.00

The Studio JTM range is inspired by some of the earliest Marshall amplifiers. The original amps that made guitar solos soar and the world of rock'n'roll louder. The JTM is a welcome addition to the Studio range, offering players authentic, smoothy, valve-driven break-up at lower volumes - perfect for home or studio use.

Features

Speakers: 2 12" Celestion G12M-65 Creamback 16 ohm

Wattage: 65W

Mesa Boogie TC-100 Triple Crown Guitar Amplifier Head - Black Taurus

$ 2,999.00 $ 4,986.00

Introducing the MESA/Boogie® Triple Crown™ 100. The exciting new 100 Watt model brings bold authority and amazing control via Multi-Soak™ Power Attenuation delivering big venue horsepower to the same footprint as our award-winning Triple Crown 50, adding only 11 Pounds!

The new full-featured 100-watt Head sits in a sleek chassis that can be rackmounted. Built around 4xEL34s the Triple Crown 100 is designed to feature the best sonic characteristics of rock-inspired amps from the 70s up through today.

MULTI-SOAK™ - MORE HEADROOM ON STAGE, MORE CONTROL AT HOME.

Nothing has the grunt and kick of a 100-watt head, but how useful is all that power without control? The new Triple Crown 100 offers punch and aggressive performance, easily tamed with the flick of a switch for home or studio use. Our Multi-Soak™ Attenuator in each Channel offers five power options, from the full 100-Watts of power and headroom, incrementally descending from 100 to 50, 20, and 7 down to 3-Watts of low power clip-ability, expanding the versatility of each channel exponentially.

EXCEPTIONAL TONE CONTROL & YOUR CHOICE OF EL34, 6L6, OR 6V6 POWER

Looking for a single amazing do-it-all amp? The Triple Crown 100’s all-tube amplifier is powered by 4xEL34 Power Tubes / 6x12AX7 & 1x12AT7 Preamp Tubes. However, similar to the Triple Crown 50, our Bias Select Switch provides the option to swap the stock compliment of EL34s with the fatter, rounder-sounding 6L6 or lower-powered 6V6, which reduces all power settings by 50% to further shape your tone! In addition to 100 Watts of shapeable power, three channels deliver pristine Clean, aggressive Crunch, up to massive Gain. Each Channel is fitted with a voicing switch; DRIVE in Channel 1, TIGHT in Channels 2 and 3.

Specifications

Quick Overview

Wattage: Multi-Soak 3, 7, 20, 50, or 100 Watts (Channel Assignable)
Channels & Modes: 3 Channels/ 2 Modes per Channel
Mode Voicing Styles: Ch 1 = Normal (Clean) or Drive Ch 2 = Normal (Modern Crunch) or Tight, Ch 3 = Normal (High-Gain) or Tight
Graphic EQ Reverb FX solo: Reverb, FX Loop, Solo
Foot Switchable Functions: Ch. 1, 2, 3, Reverb, FX Loop & Solo

Amp Features

Amp Type: Tube
Rectifier Type: Silicon Diodes
Preamp Tubes: 6x Mesa 12AX7, 1x Mesa 12AT7
Power Amp Tubes: 4x Mesa EL-34 or 6V6 or 6L6
Maintenance Free Fixed Bias: Yes
Number of Style Modes: 6
Number of Styles Modes per Channel: 2
Channel Controls: Each Channel features independent 2-Position Style Mode Switch, Gain, Treble, Mid, Bass, Presence, Reverb (Back Panel), Master, & Multi-Soak Power Controls
Effects Loop Bypass Options: Footswitchable, Fully Buffered Series Tube FX Loop
Global Output Level Control: Yes (Over all Channels)
Global Solo Level Control: Yes (Over all Channels)

Accessories

Footswitch: Included - 3X3 - 6 Button Footswitch (Bottom Row: Ch. 1, Ch. 2, & Ch. 3 - Top Row: Reverb, FX Loop & Solo)
Slip Cover: Included - Fitted Slip Cover
Cabinet Features
Cabinet Material: Marine Grade, Baltic Birch

Randall RG1003H Guitar Amplifier Head

Randall

$ 649.99 $ 1,000.00

The RG1003H is a 3 Channel, 100 watt high gain FET solid state guitar amplifier head with Reverb and a serial F/X loop. It has a 1/8″ stereo media input, headphone output, and a speaker emulated XLR direct output with ground lift. There is also a footswitch included.

ELECTRONICS

Controls: Master Volume, 3 x Channel Volume, 3 x Channel Gain, Bass, Middle, Treble, Presence, Reverb

Wattage: 100 Watts

Channels: 3

Impedance: 4 OHM Minimum

Fx Gate Reverb: Spring Reverb

Inputs: 1 x Standard Guitar Input, FX Return, Footswitch, 1 x 1/8" Aux Input

Outputs: 2 x Speaker Jacks, Headphone Jack, FX Send, XLR Line Out

OTHER

Additional Info1 x Serial F/X Loop

Mesa Boogie 2x12 Vertical/Slant Rectifier Cabinet BLEM Model - Black

Sold Out $ 1,494.00

**BLEM model. Has small ding in tolex on the front. Strictly cosmetic. Price has been discounted accordingly.

For fans of the Slant Cab style and tone (but a 4x12 is too much), the Rectifier® 2x12 Vertical Slant delivers. With roughly the same interior area as the Horizontal 2x12 Recto cab, the overall tone, punch and detail is similar, but some players prefer a Slant-style cabinet for the ‘monitor’ effect from the top speaker sloping upwards. When you can’t bring a 4x12 to the gig or session, the 2x12 Recto Vertical Slant Cab easily provides a similar sonic footprint, without the size & weight… and it’s styling and huge tone will probably fool most folks into thinking it IS a 4x12. You simply won’t find a better cabinet. ALL MESA® ENCLOSURES are made using the finest Void-free, Marine Grade Baltic Birch. Super strong rabbet corners are glued and nailed. Speaker baffles are fitted with superior dado joint construction and braced. Grilles are wrapped around a separate grille board, not the baffle board. Grille material is made of strong twisted jute dipped in a special coating that filters top end for a sweeter response.

CABINET GENERAL INFORMATION

Cabinet Material: Marine Grade, Baltic Birch
Standard Finish Options (no extra cost): Black Bronco Vinyl, Black Jute Grille, Black Handle & Corners
Custom Finish Options: See Custom Finish Gallery

CABINET FEATURES AND SPECS

Styletype: Closed Back (sealed)
Cabinet Internal Volume: 120 Watts
Speakers Mounting Position: Celestion Vintage 30s / Rear Mounted
Mono Or Mono Stereo Input: Mono Std. / Mono + Stereo Optional (sold separately)
Cabinet Impedance: 8 Ohm
Transport Assistance: Included - Track-Loc™ Removable Casters
Additional Features: Paralleled Mono Output

ACCESSORIES

Slip Cover: Included - Fitted Slip Cover

WEIGHTS AND DIMS

Weight: 70 Lbs.
Height: 27 7/8"
Width: 23 5/8"
Depth: 14 1/4"

Fender 1996 Blues DeVille Guitar Combo Amplifier USED - Tweed

Fender

Sold Out

SPECS

3 12AX7 preamp tubes and 2 6L6 output tubes.
Normal and Drive channels, voiced for classic blues, country and rock styles
Bright switch for Normal channel
Fender spring Reverb
Effects Loop
Cloth Tweed covering, Chicken Head pointer knobs and chrome control panel
Two-button footswitch (Channel/Drive-More Drive) is included

**This amp is used in fair condition, Comes with cover and pedal

PRS Archon 1x12 Cabinet

PRS

$ 399.00 $ 810.00

PRS Archon speaker cabinets feature a closed back design, delivering punch and tight low end. The Celestion V-Type speaker was chosen for its ability to maintain a balanced tonal signature from the Archon’s exceptional clean channel through classic crunch and modern metal gain. Wrapped in black vinyl and outfitted with British-style knitted weave grill cloth and PRS Signature logo, Archon speaker cabinets have a clean and powerful look. Their rugged construction means players can trust them out on the road for years to come.

SPECIFICATIONS

Wood(s)	Plywood
Construction	Closed Back
Covering	Black Textured Vinyl
Grill Cloth	Black British-Style Knitted Weave
Speakers	Celestion V-Type
Impedence	16 Ohms
Power Handling	70 Watts
Width	24"
Depth	10.5"
Height	18"
Weight	43 lbs

PRS Archon 50W Combo - Black

PRS

$ 1,199.00

Greek for “ruler” or “lord,” the PRS Archon is a commanding 2-channel amp with versatile overdriven tones and sparkling cleans with plenty of headroom. Designed with five gain stages before the master volume, the Archon’s lead channel is voiced to cover everything from Classic Rock to Metal with full, lush distortion. The clean channel provides rich tones that retain clarity even at high volume, and there is ample headroom, creating an excellent platform for pedals. The Archon has remarkably responsive tone with incredible note separation, whether you’re playing on the clean channel or chugging on the lead.

The PRS Archon is powered by 6L6 tubes, offering full, articulate tone with smooth high end and tight low end. They chug, distort, and get heavy without over-saturating, and they sing without becoming harsh. The 1x12 combo features a single Celestion V-type speaker, offering full, extended lows and sweet midrange. The compactness and portability of a “grab and go” combo design is also great for players who bring their amp along to rehearsals, studio time, and gigs.

Utilizing a ‘no flash or trash’ approach, the Archon’s control layout allows for detailed and intuitive tone shaping. Each channel features volume, treble, middle, bass, and master volume controls as well as a bright switch. The 3-band EQ lets players better dial-in their desired tone, while the volume and master controls work together to command the amp’s distortion and loudness. The bright switch acts almost as a treble boost, putting a shine on the amp’s high-end without going into icepick territory. The global presence and depth controls in the Archon’s power amp section both work to modify the feedback network of the amp to unleash the potential of the high- and low-end respectively. Turning up the Presence control releases more high- mid and treble frequencies, bringing the amp’s tone forward. Depending on the tone stack and volume settings, the Presence can change the gain/ texture and loudness of the high-end, making your tone wilder and more 3-dimensional (or more “present” sounding). In addition to adding low-end, Depth adds a resonance to those frequencies that more 3-dimensionally shapes the Archon’s tone.

Bottom Line: The Archon 50 delivers full, lush gain, a remarkable clean channel, and a versatile control layout that players of all genres will appreciate. Available as a 50-watt head or 1x12 combo.

SPECIFICATIONS

GENERAL
Available Configurations	1x12 Combo, Head
Channels	Lead & Clean

ELECTRONICS
Wattage	50

FRONT PANEL CONTROLS
Lead Channel	Master Volume, Bass, Middle, Treble, Bright Switch, Volume
Clean Channel	Master Volume, Bass, Middle, Treble, Bright Switch, Volume
Global Controls	Presence, Depth

BACK PANEL FEATURES
Inlet	Fused Power Inlet (IEC)
Effects Loop	Series - tube driven
Bias	Adjustable with Monitoring Jacks
Extension Speaker Jacks	5
Ohm Switching	(2) 4 ohm & (2) 8 ohm parallel, (1) 16 ohm

HARDWARE
Covering	Black Textured Vinyl
Grill Cloth	Black British-Style Knitted Weave
Panel	Brushed Black Metal
Piping	Black Embossed Welt
Speakers	Celestion V-Type 70W

TUBES
Power Tubes	2x 6CA7 or 6L6GC
Preamp Tubes	6x 12AX7 / ECC83

PREAMP TUBE POSITIONS & FUNCTIONS
V1	Common Input
V2	Clean Channel
V3 & V4	Lead Channel
V5	Effects Loop
V6	Phase Inverter

MEASUREMENTS
Amp Width	21.5”
Amp Depth	10”
Amp Height	18”
Amp Weight	42.8 lbs

ACCESSORIES
Included Accessories	1-Button Footswitch, for Channel Switching

PRS Hendrix (HDRX) 20 Amplifier Head - Black

PRS

$ 799.00

The PRS HDRX 20 captures the flexibility, power, and balance of late 60’s British-inspired tone in a lower wattage package. The PRS HDRX 20 features a newly-documented “Authentic Hendrix” Touring Circuit. This circuit is heavily inspired by one of Hendrix’s personal amps, purportedly used at Woodstock, which Paul Reed Smith and PRS Amp Designer Doug Sewell were able to study in 2018.

Designed to push the high-end so it is very clear, but not so much that it’s harsh, the PRS HDRX shines without glaring and allows for aggression that can be backed off for smooth, sweet tones. The PRS HDRX 20 is driven by two 5881 power tubes. Chosen for their lower power, smaller size, and organic voice, the 5881 tubes bring thick but articulate tone that drives well and breaks up beautifully in this lower-wattage amp.

The PRS HDRX 20 features a 3-band TMB tone stack, 2-way bright switch, high-mid gain switch, and presence controls. These features mirror the historic amp and give players flexibility and increased control of their tone. The PRS HDRX 20 is also designed with internally bridged channels with individual treble and bass volume controls. This eliminates the need for a jumper cable (historically used on the outside of the amp) and allows players to dial in their distortion level and tone more easily by blending the lead and bass channels’ individual volume controls, bringing more modern convenience to the amp. The addition of a Master Volume control on the HDRX 20, a new feature for HDRX amps, is another modern convenience. Players can use the Master Volume to control the power amp section of the HDRX, making it more user friendly for players who do not want to add a volume attenuator to their setup.

SPECIFICATIONS

GENERAL
Available Configurations	Head Only

ELECTRONICS
Wattage	20

FRONT PANEL CONTROLS
Global Controls	Master Volume, High Mid Gain Switch (off/on), Treble, Middle, Bass, Presence
Channel 1 Controls - Bass Volume Channel 2 Controls - Treble Volume, Bright (on/off) Note: Channels 1 and 2 are internally bridged

FRONT PANEL CONTROLS

Global Controls

Master Volume, High Mid Gain Switch (off/on), Treble, Middle, Bass, Presence

Channel 1 Controls - Bass Volume

Channel 2 Controls - Treble Volume, Bright (on/off)

Note: Channels 1 and 2 are internally bridged

BACK PANEL FEATURES
Inlet	Fused Power Inlet (IEC)
Bias	Adjustable with Monitoring Jacks
Extension Speaker Jacks	5
Ohm Switching	(2) 4 ohm & (2) 8 ohm parallel, (1) 16 ohm

HARDWARE
Covering	Black Tolex
Panel	Black Tolex
Piping	Black

TUBES
Power Tubes	(2) 5881 or 6L6WGC-STR Short Bottle
Preamp Tubes	(3) 12AX7 / ECC83

PREAMP TUBE POSITIONS & FUNCTIONS
V1	Input
V2	Cathode Follower
V3	Phase Inverter

MEASUREMENTS
Amp Width	17.25”
Amp Depth	9”
Amp Height	9”
Amp Weight	27.6 lbs

Boss Katana-212-2 Combo Guitar Amplifier

Boss

Sold Out $ 699.98

Katana MkII takes the acclaimed Katana guitar amp series to the next level, turbocharging the core platform with more sounds, more effects, and more features. Newly voiced variations are now available for all five amp characters, doubling the tonal options. And the onboard effects categories have been expanded from three to five, providing even more real-time processing to choose from. The usability has been ramped up too, with a power amp input for modelers and multi-FX, easy stereo expansion for dual amp setups, updated editor software, and many other enhancements.

Main Features

Stage-ready 100-watt combo amp with two custom 12-inch speakers
Tube Logic design approach produces class-defying power, authoritative punch, and cutting presence
Five unique amp characters (Clean, Crunch, Lead, Brown, and Acoustic), plus newly voiced variations for each
Five independent effects sections (Booster, Mod, FX, Delay, and Reverb), with three selectable variations in each
Dedicated Pedal FX for foot-controlled wah and pedal bend
Updated BOSS Tone Studio software for customizing your sound with over 60 different BOSS effects, channel and global EQs, adjustable routing, and much more
Power Amp In for preamps, modelers, and multi-effects
Stereo Expand out to link with a second Katana MkII (all models except the Katana-50 MkII)
Eight Tone Setting memories for storing and recalling all amp and effect settings
Power Control for achieving cranked-amp tone and response at low volumes
Three Cab Resonance options (Vintage, Modern, and Deep), selectable from the panel or BOSS Tone Studio
Mic'd cabinet emulation on the line, USB, and phones/recording outputs, with five Air Feel settings available in BOSS Tone Studio
Optional GA-FC/GA-FC EX foot controller provides complete amp control, including Tone Setting selection, effects on/off,expression pedal control, and more
Connections for up to two footswitches or an expression pedal
Effect loop, with selectable series/parallel operation and adjustable level in BOSS Tone Studio

Marshall MX212AR Amplifier Cabinet

Marshall Amps

Sold Out $ 770.00

Great value and fantastic quality —what’s not to love about these 2x12’s? They pair well with most Marshall heads or can be used as an extension cabinet for a combo. They are fitted with two Celestion Seventy 80 speakers that definitely pack a punch.

This cabinet is also available in an angled form which is perfect for projecting sound or use on tight stages.

KEY FEATURES

Plenty of power – the Celestion speakers pack enough power to deliver that iconic Marshall rock tone.

Superb speakers – these speakers add a tight low-end and a punchy mid-range to your sound. With excellent power handling, this cabinet is begging you to crank up that gain.

TECHNICAL SPECIFICATION

GENERAL

Model: MX212 and MX212A

ELECTRONICS

Inputs: 1

SPEAKERS

Speaker configuration: 2x12"
Speaker model: Celestion Seventy-80 (80W, 16Ω)
Power handling: 150W
Unit impedance: 8Ω

ACCESSORIES

Dust cover: M-COVR-00068 MX212 (sold separately)

DIMENSIONS (MX212)

Width: 745 mm / 29.5"
Depth: 320 mm / 12.5"
Height: 545 mm / 21.4"
Weight: 23.6kg / 52.0lbs

DIMENSIONS (MX212A)

Width: 535 mm / 21.1"
Depth: 310 mm / 12.2"
Height: 760 mm / 29.9"
Weight: 23.2kg / 51.1lbs

Marshall M-MX112R-U Cabinet Amplifier - Black

Marshall Amps

$ 479.99 $ 580.00

KEY FEATURES

Wherever you go – this modest sized cabinet is great for life on the move and definitely delivers on stage. It also has a top strap handle for extra portability.

Epic sound – this cabinet has plenty of attack with its heavy bass, bold mid-range and punchy highs.

TECHNICAL SPECIFICATION

GENERAL

Model: MX112

ELECTRONICS

Inputs: 1

SPEAKERS

Speaker configuration: 1x12"
Power handling: 80W
Speaker model: Celestion Seventy-80 (16Ω, 80W)
Unit impedance: 16Ω

DIMENSIONS

Width: 500 mm / 19.7"
Height: 470 mm / 18.5"
Depth: 290 mm / 11.4"

Mesa Boogie 1x12 Boogie 23" Open Back Cabinet - California Tweed

Sold Out $ 934.00

Portable, Traditional Sounding Extension with a Wide, Sweet American Voice

The California Tweed™ 23 1x12 provides a portable, traditional sounding Extension with a wide, sweet American voice. Balanced midrange, big bouncy low end that’s not too deep and sweet focused top end that’s open and bell like, all with an old school character that is resonant and dimensional sounding. This 1x12 fills the room and helps make the decision easier to break up the weight of a Combo into two great looking, perfectly mated pieces.

Cabinet Material: Marine Grade, Baltic Birch
Standard Finish Options (no extra cost): Choice of Cream Bronco Vinyl, Cream/Tan Weave Jute Grille, Brown Handle & Corners or Black Bronco or Black Taurus Vinyl, Black Jute Grille, Black Handle & Corners
Custom Finish Options: See Custom Finish Gallery
Styletype: Open Back
Cabinet Internal Volume: 40 Watts
Speakers Mounting Position: Jensen Blackbird ALNICO / Rear Mounted
Mono Or Mono Stereo Input: Mono
Cabinet Impedance: 8 Ohm
Transport Assistance: Optional (sold separately) - Track-Loc™ Removable Casters
Additional Features: Paralleled Mono Output
Slip Cover: Included - Fitted Slip Cover

Mesa Boogie Mark VII Amplifier Head - Black

$ 3,499.00 $ 4,986.00

A MAGNUM OPUS OF TONE

The MARK VIITM is the “Magnum Opus” of Randall Smith’s 50+ year career in visionary amp design. This model takes that knowledge, history, innovation, and performance and distills it into the simplest, most versatile, and smallest 90-watt Mark Series amplifier ever. The 3 Channel, 9 Mode Preamp, coupled with our legendary Simul-ClassTM Power section that offers three distinct characters across its three wattage ranges, creates a new Mark icon in terms of adaptability, soulful tube Tone, and magic feel that will serve any discerning player well.

The long-awaited “Simul Seven” leapfrogs its predecessor, the Mark Five, and the secret Mark Six prototype to arrive at the most power-packed Boogie® Mark model ever in terms of Tone, flexibility, compact design, and interfacing. This do-it-all Tone machine delivers legendary Mark performance and adds two new sounds; the throwback yet infamous Mark IIB and a new modern high-gain Mode full of character and attitude aptly named Mark VII.

Joined by iconic features that put Boogies at the top of the dream list, such as on-board Graphic EQ, lush Reverb, a seamless Effects Loop, and innovative Power switching, the Mark VII showcases our CabClone IRTM DI Direct Interface. With identical features and great sounding IRs from our standalone CabClone IR, this built-in version allows individual assignment of 8 Rectifier® and Boogie Cabinets per Channel for unmatched tunability of Direct sounds.

The Mark VII is the next Chapter in the Boogie Book of Tone and offers discerning players analog, all-tube sound, Soul, and feel in a smaller, more compact, yet more comprehensive package. With a focus on perfecting icons, bringing back beloved classics, and introducing new realms of modern high gain, all while improving the interface and the performance across all mediums, the Mark VII offers inspiration and freedom across all musical styles. This extraordinary amplifier is available in 1x12 Combo, Head, and Rackmount Head formats.

SPECS

GENERAL INFORMATION

PRODUCT NAME & FORMAT: Mark VII™ Head
PRODUCT SERIES: Mark Series
BUILD LOCATION: Built In Petaluma, CA, with the World's Finest Materials

QUICK OVERVIEW

WATTAGE: Multi-Watt™ 25, 45, or 90 (Channel Assignable)
POWER TUBE TYPE: 4x Mesa 6L6 (or EL-34)
CHANNELS & MODES: 3 Channels / 9 Modes
MODE VOICINGS/STYLES: Ch. 1 = Clean, Fat, or Crunch
Ch. 2 = Fat, Crunch, or Mark VI™
Ch. 3 = Mark IIB™, Mark IIC*', or Mark IV™
GRAPHIC EQ / REVERB / FX / SOLO: Graphic EQ. Reverb. FX Loop. CabClone IR
FOOTSWITCHABLE FUNCTIONS: Ch. 1, 2, 3, Reverb, FX Loop, & Graphic EQ
SPEAKERS) & IMPEDANCE: n/a
WEIGHT: 40 Lbs. / 18.14 kg.
DIMENSIONS: 9 1/4" H x 18 3/4" W × 10 7/8" D 23 50 cm H x 47 63 cm W × 27.62 cm D
AVAILABLE FORMATS: Head, Rackmount Head, & 1×12 Combo

AMPLIFIER FEATURES

AMP TPE: Tube
CHASSIS MATERIAL: Aluminum
RECTIFIER TYPE: Silicon Diodes
RECTIFIER TUBE(S): n/a
VARIAC POWER SWITCH: n/a
PREAMP TUBES: 5x Mesa 12AX7
POWER AMP TUBES: 4x Mesa 6L6 (or EL-34)
BIAS SWITCH FOR ALTERNATE POWER TUBE TYPES: Bias Select for 6L6 or EL-34
MAINTENANCE FREE FIXED BIAS: Yes
WATTAGE(S) QUICK REFERENCE (SEE POWER AMP DETAILS FOR MORE INFO): 25, 45, or 90 Watts - Channel Assignable - See Power Amp Details for more information
BUILT-IN POWER AMP ATTENUATION: n/a

POWER AMP DETAILS (CLASS & WATTAGE): MESA/Boogie's exclusive Simul-Class*™ Power Amp featuring Multi-Watt™ (Patent 7,602,927) with Incrementa Wattage Reduction (Patent 9,917,560) which provide three power and two operating-class options that are channel assignable via 25/45/90 Watt Power Switches: Choose 2 power tubes operating in Class A Triode producing 25 Watts - 2 tubes running in Class A Pentode, producing 45 Watts, or 4 tubes running in MESA, Boogie's legendary Simul-Class Power that blends the best of Class A and Class A/B simultaneously to produce 90 Watts of pure tonal magic

CONVECTION OR FAN COOLING: Fan Cooled
NUMBER OF FOOTSWITCHABLE CHANNELS (OR MODES): Three Channels
NUMBER OF STYLE MODES: Nine
NUMBER OF STYLE MODES PER CHANNEL: Three
TYPES OF STYLE MODES PER CHANNEL: Ch. 1 = Clean, Fat, or Crunch
Ch. 2 = Fat, Crunch, or Mark VI
Ch. 3 = Mark IIB™, Mark IIC+™, or Mark IV™
CHANNEL CONTROLS: Each Channel features: Independent 3-Position Style Mode Switch, Graphic EQ Assignment Switch (On, Off or Footswitchable), Patented Watt Multi-Watt™ 90/45/25 Power Amp Switch, Gain, Treble, Mid, Bass, Presence & Master Controls, Reverb (Footswitchable) and an 8-Position CabClone IR Select Control (back-panel)
GRAPHIC EQ AND/OR CONTOUR: Selectable 5-Band Graphic EQ (Footswitchable, Channel Assignable or Off)
REVERB / EFFECTS & BYPASS OPTIONS: Footswitchable Alclube ong Spring Reverb with Independent Channe Controls
EFFECTS LOOP & BYPASS OPTIONS: Tube-Buffered FX Loop (Footswitchable)
GLOBAL OUTPUT LEVEL CONTROL: n/a
GLOBAL SOLO LEVEL CONTROL: n/a
TRUE-BYPASS OPTIONS: n/a
TUNER OUTPUT: n/a
EXTERNAL SWITCHING JACK OPTIONS AND/OR MIDI: MIDI Switchable/Programmable via Control Change and Program Change messages, with 256 Preset Location (MIDI IN, MIDI Thru/Out, MIDI Channel, & Store Switches) - Controls Channels 1, 2, 3, Reverb, FX Loop, & Graphic EQ
SPEAKER OUTPUTS: Two & Ohm and Two 4 Ohm
CABINET SIMULATION - DIRECT LIVE/RECORDING OUTPUT: Built-in, channel assignable, MESA CabClone™ I Cab Simulator featuring 8 MESA Cabinet IRs, USB Connection for IR transfers, Internal Amp Load for cabinet-free use, Input Level Control, IR Balanced XL Direct Output, (Dry) Line Output (Uncompensated, +4b Direct Line Output for external cab sim/IR use Re-Amping, etc.), Headphone Output, IR Output Level Control & Ground/Lift Switch
INTERNAL AMP LOAD (FOR SPEAKER-LESS PERFORMANCE): Yes (see Cabinet Simulation for more information)
HEADPHONE OUTPUT: Yes (see Cabinet Simulation for more information)
SLAVE OUTPUT: n/a

ACCESSORIES

FOOTSWITCH: Included - 3×3 - 6 Button Footswitch (Bottom Row: Ch. 1, Ch. 2, & Ch. 3 - Top Row: Reverb, FX Loop, 8 Graphic EQ)
SLIPCOVER: Included - Fitted Slipcover

CABINET FEATURES

CABINET MATERIAL: Marine Grade, Baltic Birch
STANDARD FINISH OPTIONS (no extra cost): Black Bronco Vinyl, Black Jute Grille, Black Handle & Corners
CUSTOM FINISH OPTIONS: See Custom Finish Gallery

EVH 5150 Iconic Series 1X10 Combo Amplifier - Black

EVH

$ 799.99 $ 1,118.88

The EVH® 5150® Iconic® Series satisfies the needs of gigging and recording guitarists craving that powerful EVH tube tone at a more affordable price. Evolving from the revered and flagship EVH 5150III® amplifiers, the Iconic amplifiers deliver the searing sound and growling gain that Eddie Van Halen made famous.

Collaboratively designed by the EVH team and led by renowned amp engineer, James Brown, the 5150® Iconic® Series 15-watt 1x10 combo has a 6L6 power tube voiced by a complex, multi-stage hybrid preamp section anchored by a pair of ECC83 tubes, providing all the muscle you need for a modern-day practice amp. The cabinet features special internal plywood baffling for tight and increased bass response, and houses a custom-designed EVH 10” Celestion® speaker voiced specifically for this preamp circuit, so that the pristine cleans and searing high gain tones are tight, clear and articulate.

Punching above its weight, this combo features two channels with an extra voicing on each for even more versatility. The Green channel boasts an overdrive button to run from clean tones to increased gain, while the Red channel’s burn button adds fiery crunch that’s ideal for blistering leads.

Each channel houses its own gain and volume controls, allowing for level-matching the volume when switching between the clean and high gain channels. The control panel also includes shared EQ (Low, Mid and High), global resonance and presence knobs to adjust the low- and high-end aspects of your tone, and a global reverb control to add the perfect amount of bounce and decay for any room.

Other features include a one-button footswitch, effects loop, dual parallel speaker output jacks, ¼ power switch to reduce wattage—allowing you to crank the amp and still preserve tone but without destroying your neighbor's solitude. The 1/8” audio in allows for playing along with your favorite drum tracks or songs, while the 1/8” emulated cab headphone/recording out allows for accurate all-tube EVH tone while recording direct or using through any PA system.

Sporting distinctive EVH style, the 5150 Iconic Series 15W 1x10 combo is wrapped in either Black or Ivory textured vinyl with a black cloth front grille and features silver and black 5150 and EVH logo badges in the upper left and lower right corners. This all-tube combo is finished off with a brushed aluminum top panel, vintage-style chicken-head knobs and molded black plastic top handle. A high-quality fitted cover is available as an EVH Accessory.

Model Number: 2257300010

FEATURES

15-watt 1x10 combo
Two channels: Green and Red; Green channel has overdrive button to go from clean to increased gain, while the Red channel has a burn button to go from lead to burn
Dual Gain, Shared Low, Mid, High EQ, Dual Volume, Shared Global Reverb, Resonance and Presence controls
¼ Power level switch, standby switch, power switch and ground lift located on rear panel
Selectable impedance (4, 8 or 16 ohms)
Two ECC83 preamp tubes and one 6L6 power tube
One 10” EVH® Celestion® Custom speaker
1/8” audio in and 1/8” emulated cab headphone/recording out
Dual parallel speaker output jacks
Effects loop
One-button footswitch included
Available in Black or Ivory with black cloth front grille and silver and black 5150® and EVH® logo badges
Optional high-quality fitted cover is available

Product Specs

General

Amplifier Type: Tube
Color: Black
Country Of Origin: CN
Series: Iconic

Electronics

CONTROL PANEL: Channel 1: Gain w/ Overdrive Switch; Channel 2: Gain w/ Burn Switch; Shared Low, Mid, High EQ; Channel 1/Channel 2 Volume; Global Reverb, Resonance and Presence
INPUTS: One - 1/4"
AUXILIARY INPUT: 1/8 in (3.5 mm) Stereo
HEADPHONE JACK: 1/8" Stereo
LINE OUT: One - (1/8" Stereo)
CHANNELS: Two - Clean/Overdrive and Lead/Burn
EFFECTS: Reverb
EFFECTS LOOP: 1/4" (Send/Return)
CONNECTION TYPE: 1/4"
VOLTAGE: 120V
WATTAGE: 15 Watts

Hardware

CONTROL KNOBS: Black Chicken-Head Style Pointer
AMPLIFIER COVERING: Textured Vinyl
CABINET MATERIAL: MDF w/ Plywood Baffle
GRILLE CLOTH: Black
HANDLE: Molded Plastic Strap with Black Powder Coated Caps
AMPLIFIER JEWEL: Red Jewel
SPEAKER JACK: Two - 1/4" Parallel
FRONT PANEL: Brushed Aluminum

Speakers

Speaker Wattage: 15 Watts
Speakers: One - 10" EVH® Celestion® Custom
Total Impedance: 4, 8, or 16 ohms

Tubes

Power Tubes: 1 - 6L6
Preamp Tubes: 2- ECC83
Rectifier: Solid State

Miscellaneous

Power Cable: IEC
Unique Features: 1/4 Power Level Switch

Accessories

Footswitch: 1-Button Footswitch Included

Measurements

Power Tubes: 1 - 6L6
Product Depth: 10.25" (26.04 cm)
Product Height: 18.5" (47.0 cm)
Product Width: 19.69" (500 mm)

EVH 5150 Iconic Series 1X10 Combo Amplifier - Ivory

EVH

$ 799.99 $ 1,118.88

The EVH® 5150® Iconic® Series satisfies the needs of gigging and recording guitarists craving that powerful EVH tube tone at a more affordable price. Evolving from the revered and flagship EVH 5150III® amplifiers, the Iconic amplifiers deliver the searing sound and growling gain that Eddie Van Halen made famous.

Collaboratively designed by the EVH team and led by renowned amp engineer, James Brown, the 5150® Iconic® Series 15-watt 1x10 combo has a 6L6 power tube voiced by a complex, multi-stage hybrid preamp section anchored by a pair of ECC83 tubes, providing all the muscle you need for a modern-day practice amp. The cabinet features special internal plywood baffling for tight and increased bass response, and houses a custom-designed EVH 10” Celestion® speaker voiced specifically for this preamp circuit, so that the pristine cleans and searing high gain tones are tight, clear and articulate.

Punching above its weight, this combo features two channels with an extra voicing on each for even more versatility. The Green channel boasts an overdrive button to run from clean tones to increased gain, while the Red channel’s burn button adds fiery crunch that’s ideal for blistering leads.

Each channel houses its own gain and volume controls, allowing for level-matching the volume when switching between the clean and high gain channels. The control panel also includes shared EQ (Low, Mid and High), global resonance and presence knobs to adjust the low- and high-end aspects of your tone, and a global reverb control to add the perfect amount of bounce and decay for any room.

Other features include a one-button footswitch, effects loop, dual parallel speaker output jacks, ¼ power switch to reduce wattage—allowing you to crank the amp and still preserve tone but without destroying your neighbor's solitude. The 1/8” audio in allows for playing along with your favorite drum tracks or songs, while the 1/8” emulated cab headphone/recording out allows for accurate all-tube EVH tone while recording direct or using through any PA system.

Sporting distinctive EVH style, the 5150 Iconic Series 15W 1x10 combo is wrapped in either Black or Ivory textured vinyl with a black cloth front grille and features silver and black 5150 and EVH logo badges in the upper left and lower right corners. This all-tube combo is finished off with a brushed aluminum top panel, vintage-style chicken-head knobs and molded black plastic top handle. A high-quality fitted cover is available as an EVH Accessory.

Model Number: 2257300410

FEATURES

15-watt 1x10 combo
Two channels: Green and Red; Green channel has overdrive button to go from clean to increased gain, while the Red channel has a burn button to go from lead to burn
Dual Gain, Shared Low, Mid, High EQ, Dual Volume, Shared Global Reverb, Resonance and Presence controls
¼ Power level switch, standby switch, power switch and ground lift located on rear panel
Selectable impedance (4, 8 or 16 ohms)
Two ECC83 preamp tubes and one 6L6 power tube
One 10” EVH® Celestion® Custom speaker
1/8” audio in and 1/8” emulated cab headphone/recording out
Dual parallel speaker output jacks
Effects loop
One-button footswitch included
Available in Black or Ivory with black cloth front grille and silver and black 5150® and EVH® logo badges
Optional high-quality fitted cover is available

Product Specs

General

Amplifier Type: Tube
Color: Ivory
Country Of Origin: CN
Series: Iconic

Electronics

CONTROL PANEL: Channel 1: Gain w/ Overdrive Switch; Channel 2: Gain w/ Burn Switch; Shared Low, Mid, High EQ; Channel 1/Channel 2 Volume; Global Reverb, Resonance and Presence
INPUTS: One - 1/4"
AUXILIARY INPUT: 1/8 in (3.5 mm) Stereo
HEADPHONE JACK: 1/8" Stereo
LINE OUT: One - (1/8" Stereo)
CHANNELS: Two - Clean/Overdrive and Lead/Burn
EFFECTS: Reverb
EFFECTS LOOP: 1/4" (Send/Return)
CONNECTION TYPE: 1/4"
VOLTAGE: 120V
WATTAGE: 15 Watts

Hardware

CONTROL KNOBS: Black Chicken-Head Style Pointer
AMPLIFIER COVERING: Textured Vinyl
CABINET MATERIAL: MDF w/ Plywood Baffle
GRILLE CLOTH: Black
HANDLE: Molded Plastic Strap with Black Powder Coated Caps
AMPLIFIER JEWEL: Red Jewel
SPEAKER JACK: Two - 1/4" Parallel
FRONT PANEL: Brushed Aluminum

Speakers

Speaker Wattage: 15 Watts
Speakers: One - 10" EVH® Celestion® Custom
Total Impedance: 4, 8, or 16 ohms

Tubes

Power Tubes: 1 - 6L6
Preamp Tubes: 2- ECC83
Rectifier: Solid State

Miscellaneous

Power Cable: IEC
Unique Features: 1/4 Power Level Switch

Accessories

Footswitch: 1-Button Footswitch Included

Measurements

Power Tubes: 1 - 6L6
Product Depth: 10.25" (26.04 cm)
Product Height: 18.5" (47.0 cm)
Product Width: 19.69" (500 mm)

Mesa Boogie Mark VII 1x12 Combo Amplifier - Black

$ 3,799.00 $ 4,842.00

A MAGNUM OPUS OF TONE

The MARK VIITM is the “Magnum Opus” of Randall Smith’s 50+ year career in visionary amp design. This model takes that knowledge, history, innovation, and performance and distills it into the simplest, most versatile, and smallest 90-watt Mark Series amplifier ever. The 3 Channel, 9 Mode Preamp, coupled with our legendary Simul-ClassTM Power section that offers three distinct characters across its three wattage ranges, creates a new Mark icon in terms of adaptability, soulful tube Tone, and magic feel that will serve any discerning player well.

The long-awaited “Simul Seven” leapfrogs its predecessor, the Mark Five, and the secret Mark Six prototype to arrive at the most power-packed Boogie® Mark model ever in terms of Tone, flexibility, compact design, and interfacing. This do-it-all Tone machine delivers legendary Mark performance and adds two new sounds; the throwback yet infamous Mark IIB and a new modern high-gain Mode full of character and attitude aptly named Mark VII.

Joined by iconic features that put Boogies at the top of the dream list, such as on-board Graphic EQ, lush Reverb, a seamless Effects Loop, and innovative Power switching, the Mark VII showcases our CabClone IRTM DI Direct Interface. With identical features and great sounding IRs from our standalone CabClone IR, this built-in version allows individual assignment of 8 Rectifier® and Boogie Cabinets per Channel for unmatched tunability of Direct sounds.

The Mark VII is the next Chapter in the Boogie Book of Tone and offers discerning players analog, all-tube sound, Soul, and feel in a smaller, more compact, yet more comprehensive package. With a focus on perfecting icons, bringing back beloved classics, and introducing new realms of modern high gain, all while improving the interface and the performance across all mediums, the Mark VII offers inspiration and freedom across all musical styles. This extraordinary amplifier is available in 1x12 Combo, Head, and Rackmount Head formats.

SPECS

GENERAL INFORMATION

PRODUCT NAME & FORMAT: Mark VIITM 1x12 Combo
PRODUCT SERIES: Mark Series
BUILD LOCATION: Built In Petaluma, CA, with the World's Finest Materials

QUICK OVERVIEW

WATTAGE: Multi-Watt™ 25, 45, or 90 (Channel Assignable)
POWER TUBE TYPE: 4x Mesa 6L6 (or EL-34)
CHANNELS & MODES: 3 Channels / 9 Modes
MODE VOICINGS/STYLES: Ch. 1 = Clean, Fat, or Crunch
Ch. 2 = Fat, Crunch, or Mark VI™
Ch. 3 = Mark IIB™, Mark IIC*', or Mark IV™
GRAPHIC EQ / REVERB / FX / SOLO: Graphic EQ. Reverb. FX Loop. CabClone IR
FOOTSWITCHABLE FUNCTIONS: Ch. 1, 2, 3, Reverb, FX Loop, & Graphic EQ
SPEAKERS) & IMPEDANCE: 1 - 8 Ohm Celestion Custom 90 / Total Load = 8 Ohms
WEIGHT: 58 Lbs. / 26.31 kg.
DIMENSIONS: 18 1/4” H x 18 3/4” W x 11 1/2” D 46.36 cm H x 47.63 cm W x 29.21 cm D
AVAILABLE FORMATS: Head, Rackmount Head, & 1×12 Combo

AMPLIFIER FEATURES

AMP TPE: Tube
CHASSIS MATERIAL: Aluminum
RECTIFIER TYPE: Silicon Diodes
RECTIFIER TUBE(S): n/a
VARIAC POWER SWITCH: n/a
PREAMP TUBES: 5x Mesa 12AX7
POWER AMP TUBES: 4x Mesa 6L6 (or EL-34)
BIAS SWITCH FOR ALTERNATE POWER TUBE TYPES: Bias Select for 6L6 or EL-34
MAINTENANCE FREE FIXED BIAS: Yes
WATTAGE(S) QUICK REFERENCE (SEE POWER AMP DETAILS FOR MORE INFO): 25, 45, or 90 Watts - Channel Assignable - See Power Amp Details for more information
BUILT-IN POWER AMP ATTENUATION: n/a

POWER AMP DETAILS (CLASS & WATTAGE): MESA/Boogie's exclusive Simul-Class*™ Power Amp featuring Multi-Watt™ (Patent 7,602,927) with Incrementa Wattage Reduction (Patent 9,917,560) which provide three power and two operating-class options that are channel assignable via 25/45/90 Watt Power Switches: Choose 2 power tubes operating in Class A Triode producing 25 Watts - 2 tubes running in Class A Pentode, producing 45 Watts, or 4 tubes running in MESA, Boogie's legendary Simul-Class Power that blends the best of Class A and Class A/B simultaneously to produce 90 Watts of pure tonal magic

CONVECTION OR FAN COOLING: Fan Cooled
NUMBER OF FOOTSWITCHABLE CHANNELS (OR MODES): Three Channels
NUMBER OF STYLE MODES: Nine
NUMBER OF STYLE MODES PER CHANNEL: Three
TYPES OF STYLE MODES PER CHANNEL: Ch. 1 = Clean, Fat, or Crunch
Ch. 2 = Fat, Crunch, or Mark VI
Ch. 3 = Mark IIB™, Mark IIC+™, or Mark IV™
CHANNEL CONTROLS: Each Channel features: Independent 3-Position Style Mode Switch, Graphic EQ Assignment Switch (On, Off or Footswitchable), Patented Watt Multi-Watt™ 90/45/25 Power Amp Switch, Gain, Treble, Mid, Bass, Presence & Master Controls, Reverb (Footswitchable) and an 8-Position CabClone IR Select Control (back-panel)
GRAPHIC EQ AND/OR CONTOUR: Selectable 5-Band Graphic EQ (Footswitchable, Channel Assignable or Off)
REVERB / EFFECTS & BYPASS OPTIONS: Footswitchable Alclube ong Spring Reverb with Independent Channe Controls
EFFECTS LOOP & BYPASS OPTIONS: Tube-Buffered FX Loop (Footswitchable)
GLOBAL OUTPUT LEVEL CONTROL: n/a
GLOBAL SOLO LEVEL CONTROL: n/a
TRUE-BYPASS OPTIONS: n/a
TUNER OUTPUT: n/a
EXTERNAL SWITCHING JACK OPTIONS AND/OR MIDI: MIDI Switchable/Programmable via Control Change and Program Change messages, with 256 Preset Location (MIDI IN, MIDI Thru/Out, MIDI Channel, & Store Switches) - Controls Channels 1, 2, 3, Reverb, FX Loop, & Graphic EQ
SPEAKER OUTPUTS: Two & Ohm and Two 4 Ohm
CABINET SIMULATION - DIRECT LIVE/RECORDING OUTPUT: Built-in, channel assignable, MESA CabClone™ I Cab Simulator featuring 8 MESA Cabinet IRs, USB Connection for IR transfers, Internal Amp Load for cabinet-free use, Input Level Control, IR Balanced XL Direct Output, (Dry) Line Output (Uncompensated, +4b Direct Line Output for external cab sim/IR use Re-Amping, etc.), Headphone Output, IR Output Level Control & Ground/Lift Switch
INTERNAL AMP LOAD (FOR SPEAKER-LESS PERFORMANCE): Yes (see Cabinet Simulation for more information)
HEADPHONE OUTPUT: Yes (see Cabinet Simulation for more information)
SLAVE OUTPUT: n/a

ACCESSORIES

FOOTSWITCH: Included - 3×3 - 6 Button Footswitch (Bottom Row: Ch. 1, Ch. 2, & Ch. 3 - Top Row: Reverb, FX Loop, 8 Graphic EQ)
SLIPCOVER: Included - Fitted Slipcover

CABINET FEATURES

CABINET MATERIAL: Marine Grade, Baltic Birch
STANDARD FINISH OPTIONS (no extra cost): Black Bronco Vinyl, Black Jute Grille, Black Handle & Corners
CUSTOM FINISH OPTIONS: See Custom Finish Gallery
SPEAKER(S) & IMPEDANCE: 1 - 8 Ohm Celestion Custom 90 / Total Load = 8 Ohms

EVH 5150 Iconic Series Combo Amplifier - Black

EVH

$ 1,399.99 $ 1,958.02

The EVH® 5150® Iconic® Series satisfies the needs of gigging and recording guitarists craving that powerful EVH tube tone at a more affordable price. Evolving from the revered and flagship EVH 5150III® amplifiers, the Iconic amplifiers deliver the searing sound and growling gain that Eddie Van Halen made famous.

Collaboratively designed by the EVH team and led by renowned amp engineer, James Brown, the 5150® Iconic® Series 60-watt 2x12 combo is powered by two 6L6 power tubes and voiced by a complex, multi-stage hybrid preamp section anchored by a pair of ECC83 tubes providing all the fire power the modern guitarist needs. The cabinet features special internal plywood baffling for tight and increased bass response, and houses a pair of custom-designed EVH 12” Celestion® speakers voiced specifically for this preamp circuit, so that the pristine cleans and searing high gain tones are tight, clear and articulate.

This combo features two channels with an extra voicing on each for even more versatility. The Green channel boasts an overdrive button to run from clean tones to increased gain, while the Red channel’s burn button adds fiery crunch that’s ideal for blistering leads. Each channel houses its own gain and volume controls, allowing for level-matching the volume when switching between the clean and high gain channels. The channel two noise gate’s quick attack suppresses any hiss while ensuring all staccato riffing is articulate and crisp, not choked and choppy. The Boost control allows you to add another 10Db of foot-switchable volume to your tone — perfect for ensuring your solos cut through the mix. The control panel also includes shared EQ (Low, Mid and High), global resonance and presence knobs to adjust the low- and high-end aspects of your tone, and a global reverb control to add the perfect amount of bounce and decay for any room.

Other features include a two-button footswitch, effects loop, dual parallel speaker output jacks, ¼ power switch to reduce wattage—allowing you to crank the amp and still preserve tone but without destroying your neighbor's solitude, and a speaker-emulated DI XLR with power amp mute for accurate all-tube EVH tone for recording direct or using through any PA system.

Sporting distinctive EVH style, the 5150 Iconic Series 60W 2x12 combo is wrapped in either Black or Ivory textured vinyl with a black cloth front grille and features silver and black 5150 and EVH logo badges in the upper left and lower right corners. This all-tube combo is finished off with a brushed aluminum top panel, vintage-style chicken-head knobs and molded black plastic top handle. A high-quality fitted cover is available as an EVH Accessory.

Model Number: 2257200010

Product Specs

General

SERIES: Iconic
COLOR: Black
AMPLIFIER TYPE: Tube
COUNTRY OF ORIGIN: CN

Electronics

CONTROLS: Channel 1: Gain w/ Overdrive Switch; Channel 2 Gain w/ Burn Switch; Noise Gate Channel 2: Low, Mid, High EQ; Channel 1/ Channel 2 Volume, Master Boost, Global Reverb, Resonance, and Presence
CONTROL PANEL: Channel 1: Gain w/ Overdrive Switch; Channel 2: Gain w/ Burn Switch; Noise Gate (Channel 2); Shared Low, Mid, High EQ; Channel 1/Channel 2 Volume; Master Boost; Global Reverb, Resonance and Presence
INPUTS: One 1/4"
HEADPHONE JACK: None
LINE OUT: Two - (One XLR and One 1/4")
CHANNELS: Two - Clean/Overdrive and Lead/Burn
EFFECTS: Reverb
EFFECTS LOOP: 1/4" (Send/Return)
CONNECTION TYPE: 1/4"
VOLTAGE: 120V
WATTAGE: 60 Watts

Hardware

CONTROL KNOBS: Black Chicken-Head Style Pointer
AMPLIFIER COVERING: Textured Vinyl
CABINET MATERIAL: MDF w/ Plywood Baffle
GRILLE CLOTH: Black
HANDLE: Molded Plastic Strap with Black Powder Coated Caps
AMPLIFIER JEWEL: Red Jewel
SPEAKER JACK: Two - 1/4" Parallel
FRONT PANEL: Brushed Aluminum

Speakers

SPEAKERS: Two - 12" EVH® Celestion® Custom
SPEAKER WATTAGE: 60 Watts
TOTAL IMPEDANCE: 4, 8, or 16 ohms

Tubes

POWER TUBES: 2 - ECC83
PREAMP TUBES: 2 - 6L6
RECTIFIER: Solid State

Measurements

PRODUCT DEPTH: 11.25" (28.57 cm)
PRODUCT HEIGHT: 22" (55.8 cm)
PRODUCT WIDTH: 27" (68.6 cm)
POWER TUBES: 2 - ECC83

Accessories

FOOTSWITCH: 2-Button Footswitch Included

Miscellaneous

UNIQUE FEATURES: 1/4 Power Level Switch
POWER CABLE: IEC

Orange Crush 20RT 20W 1x8 Guitar Combo Amplifier - Black

Orange

$ 199.00 $ 259.00

CRUSH 20RT

The Crush 20RT builds on the tonal platform of the Crush 20 with even more functionality due to the inclusion of a lush onboard reverb and an integrated chromatic tuner. Like its more ‘stripped down’ sibling, the Crush 20RT features footswitchable Clean and Dirty channels plus our new high gain, four stage preamp design, serving up a huge palette of overdriven and distorted sounds, rich in harmonic overtones.

The sheer punch achieved through the Crush 20RT’s custom 8″ Voice of the World speaker is nothing short of staggering, with a commanding delivery and depth of sound that belies amp’s modest footprint. Complete with an Aux In for backing tracks and a CabSim-loaded headphone output, the Crush 20RT is the perfect portable practice amp combo, combining usable features with legendary Orange tone and buckets of classic Orange mojo.

ALL ANALOGUE SIGNAL PATH

Our commitment to analogue amplifier circuitry in a digital age ensures Crush amps possess the lively feel and responsiveness that Orange is famous for, inspiring guitarists to play their instruments, not the technology. The Crush 20RT’s highly effective 3 band EQ section allows for huge control over your sound, from bold vintage colours to scooped modern tones.

TWIN CHANNEL, HIGH GAIN PREAMP DESIGN

Experience levels of detailed saturation and versatility never before heard in a practice amplifier. Building on the huge success of our Crush Pro series, our high gain preamp design puts a truly inspiring range of complex tones in the hands of the player. High quality, low noise components provide four stages of gain with exceptional richness and clarity, delivering everything from blissful cleans, to classic Bluesy Orange crunch all the way through to full-bodied, ultra high gain Metal distortion. Clean and Dirty channels can be switched on the amp’s top panel or remotely using the optional footswitch.

CABINET SIMULATION

The headphone/line output includes our new CabSim feature, faithfully emulating the sound of a mic’d Orange 4×12″ cabinet loaded with our flagship Voice of the World speakers. Use headphones for silent practice or connect to a mixer/recording console to capture huge, authentic Orange tones in the studio.

REVERB & INTEGRATED CHROMATIC TUNER

Based on a classic ‘spring’ type, the reverb in the Crush ‘RT models is an all-new digital module which adds a warm 3D spaciousness to your sound. Ranging from a subtle shimmer to lengthy ethereal trails, the circuit features an analogue ‘dry through’, ensuring your guitar’s tone maintains its integrity as the reverb is blended in. The integrated chromatic tuner is accurate and fast-tracking for quick tune-ups between jams.

VOICE OF THE WORLD SPEAKER

Our own custom designed speakers deliver the perfect balance between modern low end punch and vintage highs, maintaining clarity even when pushed.

CLASSIC ORANGE STYLING

Finished in our legendary livery dating back to 1968, the Crush range features our basket weave vinyl, woven speaker grille cloth, signature ‘picture frame’ edging and iconic hieroglyphs on the control panel.

FEATURES:	TWIN CHANNEL DESIGN WITH HIGH GAIN PREAMP, 3 BAND EQ, REVERB, CHROMATIC TUNER, AUX IN & CABSIM-LOADED HEADPHONE OUTPUT
TOP PANEL (RIGHT TO LEFT):	INSTRUMENT INPUT, CLEAN VOLUME, DIRTY GAIN, BASS, MIDDLE, TREBLE, DIRTY VOLUME, CHANNEL SELECTOR SWITCH, AUX IN, HEADPHONE OUTPUT (BELOW): INTEGRATED CHROMATIC TUNER, REVERB
REAR PANEL:	FOOTSWITCH JACK (FOOTSWITCH SOLD SEPARATELY)
FINISH OPTIONS:	ORANGE OR BLACK BASKETWEAVE VINYL
OUTPUT POWER:	20 WATTS
SPEAKER:	CUSTOM 8″ VOICE OF THE WORLD
UNBOXED DIMENSIONS (W X H X D):	37.5 × 32.5 X 19.7CM (14.67 X 12.8 X 7.75″)
UNBOXED WEIGHT:	7.2KG (15.9LB)

Mesa Boogie Mark Five 25 1x10 Combo Amp - British Garnet Bronco

$ 2,338.00 $ 2,664.48

Our Renowned Mark Series Amplifiers Served Up in Two Compact, Yet Explosive Formats

The MARK FIVE: 25™, now in a 16.5 lbs., 14" wide head or 15”x14”, 24 lb. Combo, delivers 2 Channels, 6 Modes and essentially a “greatest hits” collection of our renowned Mark Series preamp circuits served up with a brash attitude packaged in two unbelievably small formats!

In this small but mighty 25-watt incarnation, the sounds and attributes that make MARK Series amps so popular on stage and in the studio are not only shrunk to their smallest possible physical size, but are also further refined and improved. The gorgeous sparkling Cleans and soaring high gain Lead sounds have made the jump successfully across output tube platforms and a new and exciting timbre of the MARK Series voice is created here in the MARK FIVE: 25’s EL84 Duet. Brighter, tighter, more shredding in the top end, a bit more forgiving in feel and exceedingly more clip-able, the MARK FIVE: 25 is right on time.

THOROUGHBRED STOCK. THE MARK IIC+™, MARK IV™ and MARK V™ ARE ALL HERE

The MARK FIVE: 25™ is born of thoroughbred stock that carries worldwide accolades and is still setting trends with top Artists many decades after its unveiling. The MARK FIVE: 25, like the MARK V™, is really a collection of iconic amplifiers. There are far too many circuits and sounds to think of it as merely an amp—it’s a living history of MESA/Boogie! From the groundbreaking MARK I™ that introduced the world to high-gain with its cascading preamp, to the MARK II™, the world’s first high-gain Dual Mode Channel Switching amplifier (and its later siblings that introduced Simul-Class™ power).

From the MARK III™ that ushered in the era of 3 Channel foot switching performance, to the MARK IV™ which gave all that power individual control, the MARK V (and now the FIVE: 25) is the embodiment of guitar-amp evolution that started right here at Boogie back in 1969. Packing the legendary preamp TONE, stylistic versatility and aggressiveness of the MARK IIC+™, MARK IV and MARK V, the new MARK FIVE: 25 combines the power of our most famous Mark Series preamps with our exclusive Dyna-Watt™ 2xEL84 power section to create a new Mark Series amp of unprecedented portability, clip-ability and high-speed, tactile expressiveness. The result is a new bench-MARK, every bit worthy of its ancestor’s storied heritage.

MIND-BLOWING PERFORMANCE IN COMPACT HEAD OR 1X10 COMB0 + OPTIONAL 1X10 EXTENSION CAB!

Now with the inclusion of the smallest Mark Series Combo and 1X10 EXTENSION ever, all this historic Tone awaits in a grab and go format that looks demure and jewel-like, yet sounds formidable, if not mind-blowing. Physics seems to take a holiday as you experience the ferociousness of these 1x10 models. Like the original MARK I Boogie that started it all, this tiny new MARK sneaks in like a Mouse, but showing up to testify for its mighty roots, roars like a Lion once it starts speaking. Whether you choose the Head and an Extension or two, or the 1x10 Combo for ultimate portability, the MARK FIVE:25 unveils a new and exciting version of a classic. A bit more chime, shred and slightly tucked low end that is perfect, even perhaps preferable for some, surprises you here in a package you have to hear to believe, and just can’t help but smile upon. Whether introducing the MARK heritage to a new generation of low wattage devotees or fulfilling the ultra-portable Tone Dreams of steadfast MARK Series fans, the MARK FIVE: 25 has got what it takes to inspire and fuel your passion in the most manageable package ever!

Wattage: Multi-Watt™ 10 or 25 (Channel Assignable)
Channels & Modes: 2 Channels / 6 Modes
Mode Voicings styles: Ch. 1 = Clean, Fat or Crunch Ch. 2 = Mark IIC+™, Mark IV™ or Extreme
Graphic Eq Reverb Fx Solo: Graphic EQ, Reverb & FX Loop
Foot switchable Functions: Ch. 1/2 & EQ
Speakers Impedance: 1 - 8 Ohm Celestion G10 Creamback / Ttl Load = 8 Ohms
Weight: 24 Lbs.
Dimensions: 14 3/4" H x 14 1/8" W x 9 3/8" D
Available Formats: Head & 1x10 Combo
Amp Type: Tube
Rectifier Type: Silicon Diodes
Rectifier Tubes: n/a
Variac PowerSwitch: n/a
Preamp Tubes: 6x Mesa 12AX7
Power Amp Tubes: 2x Mesa EL-84
Maintenance Free Fixed Bias: Yes
Wattages Quick Reference: 10 or 25 Watts - Channel Assignable - See Power Amp Details for more information
Built In Power Amp Attenuation: n/a
Power Amp Details Class Wattage: Mesa's Patented Multi-Watt™ (Patent 7,602,927) Power Amp, featuring Dyna-Watt™ technology, providing two power levels, each with different wiring configurations (Pentode/Triode) via two 10/25 Watt Power Switches: Choose from 2 power tubes operating in Class A/B Triode for lush harmonics and a sweet, liquid feel at lower volumes, producing 10 Watts or; 2 tubes operating in Mesa's proprietary Dyna-Watt™ Class A/B Pentode for maximum power, punch and clarity, producing 25 Watts
Number Of Style Modes: Six
Number Of Style Modes Per Channel: Three
Channel Controls: Each Channel features Independent 3-Position Style Mode Switch, 10/25 Watt Multi-Watt™ Switch, Gain, Treble, Mid/Boost* (Ch 1), Mid (Ch 2), Bass, Presence, Reverb (back panel), Master and Graphic EQ Assignment Switch (On, Off or Footswitchable) - *The Mid/Boost Control on Channel 1 doubles as a standard Mid Control when set between 0 to 5 and turns into a Variable Gain Boost when set from 5 to 10
Graphic Eq And/or Contour: Selectable 5-Band Graphic EQ (Footswitchable, Channel Assignable or Off)
Reverb Effects Bypass Options: All-Tube, Spring Reverb with Independent Channel Controls
Effects Loop Bypass Options: Fully Buffered Series FX Loop
Global Output Level Control: n/a
Global Solo Level Control: n/a
True Bypass Options: n/a
External Switching Jack Options And/or Midi: n/a
Speaker Outputs: One 8 Ohm and Two 4 Ohm
Cabinet Simulation Direct Live recording Output: Built-in Mesa CabClone™ Cab Simulator with Internal Amp Load & Headphone Output - Featuring Closed Back & Open Back Cabinet Simulations, Speaker On/Off and Ground Lift Switches
Internal Amp Load For SpeakerLess Performance: Yes (see Cabinet Simulation for more information)
Headphone Output: Yes (see Cabinet Simulation for more information)
Slave Output: n/a
Extra Features: n/a
Footswitch: Included - 2 Button Footswitch (Ch. 1/2 & EQ)
Slip Cover: Included - Fitted Slip Cover
Cabinet Material: Marine Grade, Baltic Birch
Custom Finish Options: British Garnet Bronco, Black Jute, White Welt, Large Black Handel, Black Leather Corners
Speakers Impedance: 1 - 8 Ohm Celestion G10 Creamback / Ttl Load = 8 Ohms
Casters: n/a
Extra Features: n/a
Weight: 24 Lbs.
Height: 14 3/4"
Width: 14 1/8"
Depth: 9 3/8"