Effects
Radial Engineering AC-Driver Compact Acoustic Preamp Pedal
$ 209.99 $ 252.00
Great tone can be simple
The AC-Driver allows you to obtain great sounding results in a short amount of time, with powerful easy-to-use controls that allow you to set your levels and reduce on-stage feedback. An adjustable low cut filter removes excessive low frequencies, while a 180° phase switch helps correct feedback build-up from hot spots on stage. A variable notch filter targets and removes specific problem frequencies, and a mute footswitch provides a way to silently tune on stage or change instruments without any popping or noise in the PA.
- Studio quality preamp and class-A buffer circuit
- Balanced DI output to feed a PA or powered speaker
- Mute footswitch for instrument changeovers
- Notch filter and phase switch to reduce feedback
Radial Engineering Switchbone V2 Amp Selector and Boost Effects Pedal
$ 479.99 $ 576.00
The Switchbone V2 may well be the ultimate guitar amp switcher. This device lets you switch and combine up to three guitar amplifiers without introducing distortion, switching noise, or hum into the signal path. Most importantly, it will retain the natural tone and feel of your instrument so that your natural playing style shines through. The Switchbone V2 may be used as a standard ABY switcher with both A and B outputs used separately or together, or the tuner output can be repurposed to feed a third amplifier. A built-in power booster at the output delivers up to +18db of ultra-clean boost with the option to add mid-boost for extra sustain when playing lead.
| Specifications | ||
|---|---|---|
| Audio circuit type: | Discrete Class-A | |
| Gain: | Unity to +12dB (Baseline gain) | |
| Input Impedance: | Variable with drag control | |
| Output Impedance: | 10k Ohm | |
| Noise Floor: | -111dB | |
| Features | ||
| 180° polarity reverse, Ground lift, Boost | ||
| Input Connectors: | 1/4" input | |
| Output Connectors: | 4 1/4" outputs | |
| General | ||
| Construction: | 14-gauge steel chassis & outer shell | |
| Size (L x W x D): | 6.62" x 4.5" x 2" (168 x 114 x 51mm) | |
| Weight: | 2.35lb (1.07kg) | |
| Shipping size (L x W x D): | 10.75" x 4.75" x 2.5" (273 x 120 x 64mm) | |
| Shipping weight: | 3.35lbs (1.5kg) | |
| Power: | 15VDC 400mA, center pole positive | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-year, transferable | |
Radial Engineering Texas-Pro Overdrive and Boost Pedal
$ 169.99 $ 220.00
Get Texas-sized overdrive punch and tone.
The Texas-Pro is a compact but extremely powerful dual-function pedal, providing a versatile overdrive circuit as well as a high output signal booster. These two features can be used on their own or in combination, giving you a wide range of tonal options, with the power to cut through when soloing or hit the front end of your amp harder for natural sustain and harmonics.
The overdrive section is equipped with a three-position Range switch, which tailors the response to produce vintage, modern, and high-gain overdrive tones. This allows you to choose between bluesy textures similar to an Ibanez TS9, a modern rock feel like a Fulltone OCD, or aggressive in-your-face saturation. Individual Drive, Tone, and Level controls allow you to further dial in the settings that best suit your guitar and amp setup. The Overdrive is followed by a 100% discrete, pure Class-A Boost circuit with a variable level control that can provide up to +22dB of clean gain. This can be used to let your solos sing out or to push the front end of a smaller amp harder, causing it to prematurely break up. Both the Overdrive and the Boost utilize true-bypass switching, which ensures that you retain the pure tone of your guitar as if it were plugged directly into your amplifier. For additional functionality, a built-in effects loop provides the ability to connect delays or other pedals, activating them when the Boost footswitch is engaged. This makes transitioning from rhythm to lead quick and efficient, with just a single foot-stomp required.
The Texas-Pro is housed in a compact chassis that is small enough for any pedalboard, while still able to handle the rigors of the road with 14-gauge steel construction and heavy-duty footswitches and connectors. Standard 9V power supplies and multi-pedal power bricks can be used to power the Texas-Pro.
- Versatile Overdrive with multiple tonal possibilities
- High output Class-A power booster
- Overdrive and Boost operate separately or in combination
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2024 Huber Breese Music. Powered by Shopify
