Pro Audio
Blackstar Dept. 10 Amped 1 Guitar Amp In A Compact Pedal
$ 441.99 $ 680.00
AMPED 1 is a professional 100 Watt guitar amp in a compact pedal. It turns any pedalboard, modeller, or multi-effector into a performance ready amp and ensures you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.
- 100W guitar amp in a compact pedal.
- Turns any pedalboard, modeller, or multi-effector into a performance ready amp.
- The power amplifier’s unique, high-headroom design delivers maximum power and optimum tone with any cabinet set-up at 8 or 16 Ohms.
- Response control delivers five distinctly different authentic power valve responses – KT88, 6L6, EL34, 6V6, EL84. Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp. The Linear response offers transparent power amplification, used in combination with the Flat voice when pairing your AMPED 1 with an external amp modeller.
- Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, and XLR D.I. for live use.
- Effects loop (series or parallel), 2x 9V DC outputs and MIDI control for easy integration into your pedalboard or rig.
- Includes CabRig, our next-generation DSP speaker simulator that reproduces the sound and feel of a mic’d up guitar cab in incredible detail. Deep-dive using the accompanying free Architect software and capture the incredible tones via USB / XLR out.
- Power Reduction switch allows you to select 100 Watts, 20 Watts or 1 Watt to easily get the perfect balance of power and response for any situation from studio to stage.
- Studio quality reverb with ‘freeze’ effect.
- Footswitchable Preset.
Radial Engineering Switchbone V2 Amp Selector and Boost Effects Pedal
$ 479.99 $ 576.00
The Switchbone V2 may well be the ultimate guitar amp switcher. This device lets you switch and combine up to three guitar amplifiers without introducing distortion, switching noise, or hum into the signal path. Most importantly, it will retain the natural tone and feel of your instrument so that your natural playing style shines through. The Switchbone V2 may be used as a standard ABY switcher with both A and B outputs used separately or together, or the tuner output can be repurposed to feed a third amplifier. A built-in power booster at the output delivers up to +18db of ultra-clean boost with the option to add mid-boost for extra sustain when playing lead.
| Specifications | ||
|---|---|---|
| Audio circuit type: | Discrete Class-A | |
| Gain: | Unity to +12dB (Baseline gain) | |
| Input Impedance: | Variable with drag control | |
| Output Impedance: | 10k Ohm | |
| Noise Floor: | -111dB | |
| Features | ||
| 180° polarity reverse, Ground lift, Boost | ||
| Input Connectors: | 1/4" input | |
| Output Connectors: | 4 1/4" outputs | |
| General | ||
| Construction: | 14-gauge steel chassis & outer shell | |
| Size (L x W x D): | 6.62" x 4.5" x 2" (168 x 114 x 51mm) | |
| Weight: | 2.35lb (1.07kg) | |
| Shipping size (L x W x D): | 10.75" x 4.75" x 2.5" (273 x 120 x 64mm) | |
| Shipping weight: | 3.35lbs (1.5kg) | |
| Power: | 15VDC 400mA, center pole positive | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-year, transferable | |
Tech 21 SansAmp Para Driver V2 DI Pedal
$ 249.00 $ 335.00
This floor version of our RPM rackmount provides the same detailed tone shaping possibilities for any signal source. It is particularly useful with acoustic, electric and bass guitars, and upright bass, either direct to a mixing console or with an instrument amplifier. The Para Driver DI gives your instrument a natural warmth and presence, as if miking it through a tube pre-amp. The SansAmp circuitry eliminates the harsh, unnatural harmonics of piezo pickups, while the Drive control offers some tasteful edge — just a little or over-the-top.
Version 2 has exactly the same tonality and functionality with the addition of two new features: Rumble Filter and Air. The Rumble Filter removes unwanted sub-sonic frequencies that cause boominess and audible handling noises associated with acoustic guitars.The Air button adds top-end clarity and sparkle to acoustics.
PARA DRIVER DI
FEATURES
| Active tone controls with 12dB of cut or boost | |
| Sweepable semi-parametric EQ | |
| 1/4-inch 4.7 megOhm instrument level input | |
| 1/4-inch and XLR outputs with selectable levels | |
|
Parallel, uneffected output to run a dry signal to a separate channel |
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2024 Huber Breese Music. Powered by Shopify
