Pro Audio
Fender MXA1 Headphone Amplifier Bundle
$ 199.99
Designed to provide uncompromising fidelity in any environment, the MXA1 bundle combines Fender's legacy of great-sounding, inspiring products with PreSonus' dedication to crafting top-notch audio solutions. This exclusive bundle is the perfect starting point to jump into the world of in-ear monitoring. The heart of Fender's DXA1 in-ear monitor is a custom 8.5mm titanium micro driver that reproduces frequencies from 14Hz-22kHz to ensure you hear an accurate mix. Highly sensitive, these monitors generate 116dB @ 1mW for crystal-clear, distortion-free audio reproduction and the 16-ohm +/-10% @ 1kHz impedance means they can be driven by a smartphone. The durable, low-profile slimline shell fits 95% of ears like a custom-molded monitor. PreSonus' compact, portable and durable HP2 headphone amplifier provides a straightforward way to drive your in-ear monitors and can operate on 9V battery power or DC power. It comes equipped with two XLR line-level inputs and a single stereo 1/8" headphone output with volume and pan controls to precisely dial in your mix. It can also be switched between mono and stereo modes to suit your needs. With 50mW per channel max output power, 30Hz-20kHz +/- 2dB frequency response and working impedance range of >12 ohms, you'll get plenty of distortion-free power and clean, accurate sound. The MXA1 bundle includes the DXA1 in-ear monitors with a deluxe carrying case, assorted patent-pending secure-fitting tips, a cleaning tool and detachable cable, along with the HP2 headphone amplifier and a 15ft 5-pin TA5F to 2 balanced 1/4" input cable, belt clip and 5/8" microphone mount socket.
Specs
General
-
Series: In-Ear Monitors
-
Color: Gray
-
Material: Molded Plastic
-
Country of Origin: CN
Electronics
-
Controls: Volume, Pan
-
Inputs: Two balanced 1/4" TRS inputs
-
Headphone Jack: 1/8" stereo
-
Input Impedance: 16 ohm ±10% @ 1 kHz
Performance
-
Maximum Output Level: 50 mW per channel
Hardware
-
Cable Ends: Detachable MMCX cable
-
Driver Type: Custom 8.5 mm titanium micro drivers
Measurements
-
Shipping Dimensions: 3.00 × 8.00 × 15.00 in
-
Shipping Length: 15.00 in
-
Shipping Height: 3.00 in
-
Shipping Width: 8.00 in
-
Product Depth: 2.875 in (7.3 cm)
Accessories
-
Included Accessories:
-
Stereo input cable
-
Power supply
-
3/8" to 5/8" microphone stand adaptor
-
Deluxe carrying case
-
Secure-fitting tips
-
Cleaning tool and cable
-
Fender MXA2 Bundle - FXA2 Pro In-Ear Monitors & Pre Sonus HP2 Headphone Amplifier
$ 299.99
Designed to provide uncompromising fidelity in any environment, the MXA2 bundle combines Fender's legacy of great-sounding products that inspire the greatest players with PreSonus' dedication to crafting top-notch audio solutions. This exclusive bundle is the perfect starting point to jump into the world of in-ear monitoring. The heart of Fender's FXA2 in-ear monitor is a custom 9.25mm precision rare-earth driver with a Groove-tuned™ port. This combination generates frequencies from 6Hz-23kHz for a precision mix. Highly sensitive, these monitors generate 112dB @ 1mW for crystal-clear, distortion-free audio with plenty of headroom while their 16-ohm +/-10% @ 1kHz impedance lets them be driven by a smartphone. The durable 3D-printed digital hybrid housing fits 95% of ears like a custom-molded monitor - when combined with the cushion-like comfort of the secure-fitting tips these are ideal for long playing sessions. PreSonus' compact, portable and durable HP2 headphone amplifier provides a straightforward way to drive your in-ear monitors and can operate on 9V battery power or DC power. It comes equipped with two XLR line-level inputs and a single stereo 1/8" headphone output with volume and pan controls to precisely dial in your mix. It can also be switched between mono and stereo modes to suit your needs. With 50mW per channel max output power, 30Hz-20kHz +/- 2dB frequency response and working impedance range of >12 ohms, you'll get plenty of distortion-free power and clean, accurate sound. The MXA2 bundle includes the FXA2 in-ear monitors with a deluxe carrying case, assorted patent-pending secure-fitting tips, a cleaning tool and detachable cable, along with the HP2 headphone amplifier with a 15ft 5-pin TA5F to 2 balanced 1/4" input cable, belt clip and 5/8" microphone mount socket.
Specs
General
- In-Ear Monitors
- Charcoal
- 3D-Printed Housing
- CN
Electronics
- Volume, Pan
- Two- Balanced 1/4” TRS Inputs
- 1/8" Stereo
- 16 ohm +/- 10% @ 1kHz
Performance
- 50 mW per channel
Hardware
- Detachable MMCX Cable
- Custom 9.25mm Precision Rare-Earth Drivers with Groove-Tuned Port
Accessories
- Stereo Input Cable, Power Supply, 3/8” to 5/8” Microphone Stand Adaptor, Deluxe Carrying Case, Secure-fitting Tips, Cleaning Tool and Cable
Fender Tone Master FR-10 1x10 1000W Powered Speaker - Black
$ 599.99 $ 700.00
The Tone Master FR-10 is a full range, flat response powered speaker designed for use with today's digital guitar amp modelers and profilers. Tone Master FR-10 delivers clear and accurate sound reproduction and perfectly replicates every detail of the amp and effect models. They're the ultimate companion to Tone Master Pro and the ideal solution for players who use modelers at home or on stage.
The Tone Master FR-10 features an integrated 1,000-watt power amp that delivers the volume and headroom needed for even the most demanding live performance. The 3-band active EQ and high frequency cut control allow players to fine tune their stage tone without altering the line output signal. Plus, the design of the FR series was inspired by classic Fender amplifiers for an authentic backline look and feel.
FEATURES
- 1,000 Watt Class-D Power Amp
- 10" Special Design Speaker
- 1" Wide Dispersion High Frequency Driver
- 3-Band Active EQ with High Frequency Cut Control
- Integrated Tilt Back Legs
- Lightweight Plywood Enclosure
- Authentic Fender Amplifier Industrial Design
Specifications
General
- Tone Master®
- Black
- Class-D
- CN
Electronics
- Volume, Treble, Middle, Bass, Cut
- One (1) Balanced 1/4" - XLR Combination
- One - XLR with Ground Lift
- One
- 120V
- 1000 Watts
Hardware
- Black Textured Vinyl
- Lightweight Plywood
- Silver-Strand
- Molded Plastic Strap with Nickel-Plated Caps
- Black
Speakers
- N/A - Active Speaker
- Active 2-Way
Fender Tone Master FR-12 Tweed 1x12" 1000W Powered Speaker - Tweed
$ 749.99 $ 1,050.00
The Tone Master FR-12 is a full range, flat response powered speaker designed for use with today's digital guitar amp modelers and profilers. Tone Master FR-12 delivers clear and accurate sound reproduction and perfectly replicates every detail of the amp and effect models. They're the ultimate companion to Tone Master Pro and the ideal solution for players who use modelers at home or on stage.
The Tone Master FR-12 features an integrated 1,000-watt power amp that delivers the volume and headroom needed for even the most demanding live performance. The 3-band active EQ and high frequency cut control allow players to fine tune their stage tone without altering the line output signal. Plus, the design of the FR series was inspired by classic Fender amplifiers for an authentic backline look and feel.
The Tone Master® FR-12 Tweed is a full range, flat response powered speaker designed for use with today's digital guitar amp modelers and profilers. Wrapped in iconic '50s era tweed covering and brown stripped grill cloth, the FR-12 Tweed perfectly replicates every detail of your amp simulations and are the ideal solution for players who use modelers at home or on stage.
Featuring an integrated 1,000-watt power amp, the Tone Master® FR-12 Tweed delivers the volume and headroom you need for the most demanding studio or stage performances. Other highlights include a 3-band active EQ and high frequency cut control to allow players to fine tune their stage tone without altering line out audio sent to the PA. Plus, the FR-12 Tweed™ industrial design is 100% Fender® for an authentic backline look and feel.
FEATURES
- 1,000 Watt Class-D Power Amp
- 12" Special Design Speaker
- 1" Wide Dispersion High Frequency Driver
- 3-Band Active EQ with High Frequency Cut Control
- Integrated Tilt Back Legs
- Lightweight Plywood Enclosure
- Authentic Fender Amplifier Industrial Design
Specifications
General
Electronics
Hardware
Speakers
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2026 Huber Breese Music. Powered by Shopify
