Audio-Technica ATW-1102 Handheld Dynamic Vocal Wireless Microphone System

Audio-Technica

The Audio Technica ATW-1102 package includes ahandheld dynamic microphone.transmitter and a receiver. It comes with an ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.

Audio-Technica's System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space.
Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

System 10 2.4GHz Digital Wireless Handheld System

  • Overall system specifications
    Operating Frequencies: 2.4 GHz ISM band
    Dynamic Range: >109 dB (A-weighted), typical
    Total Harmonic Distortion: <0.05% typical
    Operating Range: 30 m (100') typical
    Open range environment with no interfering signals
    Operating Temperature Range: 0 C to +40 C (32 F to 104 F)
    Battery performance may be reduced at very low temperatures
    Frequency Response: 20 Hz to 20 kHz
    Depending on microphone type

    Receiver specifications
    Receiving System: Diversity (frequency/time/space)
    Maximum Output Level: XLR, balanced: 0 dBV
    1/4" (6.3 mm), unbalanced: +6 dBV
    Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
    Dimensions: 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
    Net Weight: 290 grams (10.2 oz)
    Accessory Included: Power supply

    Handheld transmitter specifications
    RF Power Output 10 mW
    Spurious Emissions Following federal and national regulations
    Batteries Two 1.5V AA
    not included
    Battery Life >7 hours (alkaline)
    Depending on battery type and use pattern
    Dimensions 254.8 mm (10.03") long,
    50.0 mm (1.97") diameter
    Net Weight 280 grams (9.9 oz)
    without batteries
    Accessory Included AT8456a Quiet-Flex stand clamp