Audio-Technica
Audio-Technica 2000 Series ATW-2110a Wireless System
$ 329.99 $ 429.99
The Audio-Technica ATW-2110a Wireless UHF Body-Pack Microphone System bridges the gap between affordable wireless technology and professional level quality. The system operates on UHF frequencies over the 487.125 to 506.500 MHz band, and includes the ATW-T210 UniPak body-pack transmitter and ATW-R2100 diversity UHF receiver.
The ATW-R2100 receiver features True Diversity operation which selects between two receiver sections, reducing dropouts and radio frequency interference. The receiver features 10 user selectable UHF frequencies, allowing 10 systems to be used simultaneously. Single touch frequency scanning automatically selects clear frequencies in the area. The rear panel features a balanced XLR output and unbalanced 1/4" phone connection. A back-lit LCD provides channel, AF, RF and diversity status information.
The ATW-T210 UniPak transmitter is a lightweight body pack microphone transmitter that operates on the same frequencies as the receiver. The transmitter features a 4-pin Hirose connection input that is compatible with Audio-Technica "CW" lavaliers and head worn microphones, and select instrument cables. The transmitter operates up to 9 hours on two 1.5V AA batteries.
- Serious advances in affordable professional wireless
- Clear sound quality and rock-solid, dependable performance
- Automatic frequency scanning
- 10 compatible user-switchable channels in one of two UHF frequency ranges
- Antenna power available for powered antennas & other in-line RF devices
- True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
- Tone Lock tone squelch system fights interference
- Rugged metal half-rack receiver with soft-touch controls and LCD display
- Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
- Switchable transmitter power output with high and low settings offered
- Includes rack-mount kit and detachable UHF antennas
- Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
- ATW-T220a Handheld Microphone/Transmitter features PRO 41 Capsule for maximum feedback rejection and consistent sound
Audio-Technica AT2020 Cardioid Condenser Microphone
$ 99.00 $ 169.00
The Audio-Technica AT2020 Cardioid Condenser Microphone is the ideal mic for project and home studio applications. With a remarkably low price, cardioid pattern, and specs that put it in the big leagues, it features a custom-engineered, 16mm low-mass diaphragm and smooth 20Hz-20kHz frequency response. The AT2020's low self-noise is suited to digital recording, plus it has a high 144dB SPL handling.
Requires phantom power.
- Condenser
- Cardioid pattern
- Side address
- 16mm low-mass diaphragm
- 20Hz-20kHz frequency response
- 144dB SPL handling
- Rugged body
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar pattern: Cardioid
- Frequency response: 20-20,000Hz
- Open circuit sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
- Impedance: 100 ohms
- Maximum input sound level: 144dB SPL, 1kHz at 1% THD
- Noise: 20dB SPL
- Dynamic range (typical): 124dB, 1kHz at Max SPL
- Signal-to-noise ratio: 74dB, 1kHz at 1 Pa
- Phantom power requirements: 48V DC, 2 mA typical
- Weight: 12.1 oz.
- Dimensions: 6-1/3" long, 2" diameter
- Output connector: 3-pin XLRM-type
- Included accessories: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica case style: R7
Audio-Technica AT899cW Subminiature Omnidirectional Condenser Microphone
$ 199.00
Audio-Technica’s omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping.
- Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- All wireless models available in either low-reflectance black or beige
- Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
- Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
- 9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Omnidirectional |
| FREQUENCY RESPONSE | 20-20,000 Hz |
| LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY | Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa |
| IMPEDANCE | Phantom: 200 ohms Battery: 250 ohms |
| MAXIMUM INPUT SOUND LEVEL | Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. Battery: 116 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | Phantom: 108 dB, 1 kHz at Max SPL Battery: 86 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 64 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 2 mA typical |
| BATTERY TYPE | 1.5V AA/UM3 |
| BATTERY CURRENT / LIFE | 0.4 mA / 1200 hours typical (alkaline) |
| SWITCH | Flat, roll-off (recessed) |
| WEIGHT (MICROPHONE) | 0.02 oz (0.5 g) |
| WEIGHT (POWER MODULE) | 3.6 oz (102 g) |
| DIMENSIONS (MICROPHONE) | 0.63" (16.0 mm) long, 0.20" (5.0 mm) diameter |
| DIMENSIONS (POWER MODULE) | 5.71" (145.0 mm) long, 0.83" (21.0 mm) diameter |
| OUTPUT CONNECTOR (POWER MODULE) | Integral 3-pin XLRM-type |
| CABLE | 9.8' (3.0 m) long (permanently attached to microphone), 0.08" (2.0 mm) diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module |
| ACCESSORIES FURNISHED | AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery; protective carrying case |
| AUDIO-TECHNICA CASE STYLE | M29 |
Audio-Technica ATH-M20x Professional Monitor Headphones
$ 59.00 $ 74.00
The ATH-Mx Series headphones are a reliable source for monitoring in home and professional studio environments. Because of the increased demand due to the popularity of the ATH-M50, Audio-Technica refreshed the entire line of these closed-back studio headphones for a redesigned feel. The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation
- Convenient single-side cable exit
- Designed for studio tracking and mixing
Audio-Technica ATH-M20xBT Wireless Over-Ear Headphones
$ 79.00
The ATH-M20xBT over-ear wireless headphones include all the features you want and the audio quality you demand. Inspired by our #1 selling ATH-M20x wired professional studio headphones and featuring powerful 40 mm drivers for enhanced low-frequency performance, the ATH-M20xBT Bluetooth headphones deliver an incredible listening experience with full-range, high-fidelity audio and enhanced bass.
Audio-Technica ATH-M40x Professional Monitor Headphones
$ 109.00 $ 153.00
The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
| Type | Closed-back dynamic |
| Driver Diameter | 40 mm |
| Magnet | Neodymium |
| Voice Coil | CCAW (Copper-clad aluminum wire) |
| Frequency Response | 15 - 24,000 Hz |
| Maximum Input Power | 1,600 mW at 1 kHz |
| Sensitivity | 98 dB |
| Impedance | 35 ohms |
| Weight | 240 g (8.5 oz), without cable and connector |
| Cable | Includes two interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and detachable 3.0 m (9.8') straight cable |
| Accessories Included | Protective carrying pouch, 6.3 mm (1/4") screw-on adapter |
Audio-Technica ATH-M50x Professional Monitor Headphones
$ 159.00 $ 239.99
As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50x professional monitor headphones feature the same coveted sonic signature, with the added feature of detachable cables. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.
Also available in white (ATH-M50xWH) and limited edition dark green (ATH-M50xDG).
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
| Type | Closed-back dynamic |
| Driver Diameter | 45 mm |
| Magnet | Neodymium |
| Voice Coil | CCAW (Copper-clad aluminum wire) |
| Frequency Response | 15 - 28,000 Hz |
| Maximum Input Power | 1,600 mW at 1 kHz |
| Sensitivity | 99 dB |
| Impedance | 38 ohms |
| Weight | 285 g (10 oz), without cable and connector |
| Cable | Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable |
| Accessories Included | Protective carrying pouch, 6.3 mm (1/4") screw-on adapter |
Audio-Technica ATM230 Dynamic Instrument Microphone
$ 139.00 $ 249.00
The ATM230 hypercardioid instrument microphone brings a compact drum model to Audio-Technica’s popular Artist Series line. The mic’s proprietary capsule is designed to excel in high SPL applications, delivering full, well-rounded audio with an exceptional low-end. The hypercardioid polar pattern keeps the focus on the sound source, directionality that is aided by the mic’s low-profile design, which allows it to be placed in a wide variety of setups. All this makes the ATM230 ideally suited for miking toms, snare and other percussion instruments.
The ATM230 features rugged metal construction that stands up to the rigors of live and studio applications, and comes with an AT8665 drum mount and a protective pouch.
- Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Handles very high SPL at close range
- Big, warm low-frequency response with excellent attack
- Low-profile design permits versatile placement around drum kit
- Rugged, all-metal design and construction for years of trouble-free use
- Includes AT8665 drum mount and a soft protective pouch
| ELEMENT | Dynamic |
| POLAR PATTERN | Hypercardioid |
| FREQUENCY RESPONSE | 30-12,000 Hz |
| OPEN CIRCUIT SENSITIVITY | –54 dB (1.9 mV) re 1V at 1 Pa |
| IMPEDANCE | 600 ohms |
| WEIGHT | 292 g (10.3 oz) |
| DIMENSIONS | 82.5 mm (3.2") long, 38.0 mm (1.5") maximum diameter |
| OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
| ACCESSORIES FURNISHED | AT8665 drum mount for 5/8"-27 threaded adaptor; 5/8"-27 to 3/8"-16 threaded adaptor; soft protective pouch |
| AUDIO-TECHNICA CASE STYLE | R2 |
Audio-Technica ATM650 Hypercardioid Dynamic Instrument Microphone
$ 99.99 $ 169.99
The ATM650 is a versatile addition to the Artist Series featuring a new multi-stage flat grille design for precise positioning close to the sound source. Equipped with a neodymium magnet for high-output performance, the ATM650 has a frequency response tailored for clear sound reproduction of guitar cabinets, snare and percussion. A-T's innovative dual-wall floating construction banishes handling noise.
ATM650 Hypercardioid Dynamic Instrument Microphone
- ELEMENT: Dynamic
- POLAR PATTERN: Hypercardioid
- FREQUENCY RESPONSE: 80-17,000 Hz
- OPEN CIRCUIT SENSITIVITY: —56 dB (1.5 mV) re 1V at 1 Pa
- IMPEDANCE: 300 ohms
- WEIGHT: 279 g (9.8 oz)
- DIMENSIONS: 164.2 mm (6.46") long, 38.8 mm (1.53") diameter
- OUTPUT CONNECTOR: Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- AUDIO-TECHNICA CASE STYLE: T5
Audio-Technica ATW-1102 Handheld Dynamic Vocal Wireless Microphone System
$ 409.00 $ 572.00
The Audio Technica ATW-1102 package includes ahandheld dynamic microphone.transmitter and a receiver. It comes with an ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.
Audio-Technica's System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space.
Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
System 10 2.4GHz Digital Wireless Handheld System
-
Overall system specifications
Operating Frequencies: 2.4 GHz ISM band
Dynamic Range: >109 dB (A-weighted), typical
Total Harmonic Distortion: <0.05% typical
Operating Range: 30 m (100') typical
Open range environment with no interfering signals
Operating Temperature Range: 0 C to +40 C (32 F to 104 F)
Battery performance may be reduced at very low temperatures
Frequency Response: 20 Hz to 20 kHz
Depending on microphone type
Receiver specifications
Receiving System: Diversity (frequency/time/space)
Maximum Output Level: XLR, balanced: 0 dBV
1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
Dimensions: 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
Net Weight: 290 grams (10.2 oz)
Accessory Included: Power supply
Handheld transmitter specifications
RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Batteries Two 1.5V AA
not included
Battery Life >7 hours (alkaline)
Depending on battery type and use pattern
Dimensions 254.8 mm (10.03") long,
50.0 mm (1.97") diameter
Net Weight 280 grams (9.9 oz)
without batteries
Accessory Included AT8456a Quiet-Flex stand clamp
Audio-Technica ATW-901A/G System 9 VHF Wireless Unipak System
$ 174.95
Frequency-agile VHF wireless system with guitar microphone transmitter.
Audio-Technica's System 9 is a four-channel wireless microphone system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in handheld, headworn, guitar, lavalier and body-pack configurations. The system offers four compatible user-switchable VHF channels.
This System 9 configuration includes the ATW-R900a receiver and a guitar microphone/transmitter. The ATW-R900a is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900a also offers volume control along with AF Peak, RF and Power indicator lights.
- Analog or digital: Digital
- Frequency response: 8 Hz - 13 kHz
- Width: 7.48 in.
- Height: 1.82 in.
- Depth: 5.06 in.
- Weight: 12 oz
- Type: Guitar Mic
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2026 Huber Breese Music. Powered by Shopify
