CAD
CAD AS32 Acoustic-Shield 32 Stand Mounted Acoustic Enclosure
Sold Out $ 169.99
The Acousti-shield 32 is constructed from a high quality 16 gauge perforated stainless steel shield mated to 53mm high density micro cell acoustic foam, resulting in a dry recording environment. The AS32 reduces reflections, echo and attenuates unwanted environmental acoustic interference. An innovative advanced mounting design allows for a maximum positioning stability even when mated to an economy mic stand. Innovative microphone positioning flexibility accommodates a variety of microphone designs and allows for creative control and a tailored acoustic result. The portable design allows for easy studio placement and simplifies remote recording.
The Acousti-shield 32 was developed as an effective accessory for the home recording
professional. When effectively utilized, it can substantially reduce unwanted reflections,
echo flutter and unwanted environmental acoustic interference. A trouble-free design results
in an easy to use, highly flexible device, while not sacrificing stand mounted stability. The
AS32 is constructed from high quality stainless steel and high density micro cell acoustic foam.
The AS32 is supplied with mounting hardware to adapt to most microphones for easy, flexible
placement. The AS32 is an essential tool for enhanced performance and a vital accessory
for the professional musician.
CAD Audio D80 Large Diaphragm Moving Coil Dynamic Microphone
$ 99.99
- Live performance guitar cabinet microphone designed to deliver high-quality sound
- Large moving coil dynamic that delivers a reminiscent, yet updated sound profile you would look for in a dynamic microphone
- Features a tight supercardioid polar pattern
CAD C195 Condenser Cardioid Microphone
$ 99.00 $ 199.00
The CAD C195 is a superior low-noise, electret condenser cardioid microphone designed for professional vocalists and musicians. It provides the performance and features to satisfy today's most demanding professionals.
The C195 mic has a wide, flat-frequency response that provides unsurpassed natural transparent sound. The cardioid pickup pattern minimizes annoying feedback and reduces the pickup of unwanted off-axis sounds. A transformerless electronic design provides optimum low-frequency response and low distortion. An effective internal multistage pop filter minimizes wind and breath noise.
The CAD C195 has a Flex-Form hardened steel grille screen that dramatically resists deformation while greatly reducing any risk of adverse performance caused by a bent or dented ball screen. This unique ability to retain its original shape assures that the CAD C195 will maintain its attractive appearance.
The C195 features the CAD exclusive (I.N.R.-3) Impact Noise Rejection system. A proprietary rubber shock mount isolates the transducer from the barrel, thus dramatically reducing cable, stand, and handling noise. The need for any external shock mounting device is virtually eliminated.
The low-frequency response of the CAD C195 may be enhanced by increasing or decreasing the distance from the sound source. This phenomenon is technically known as "proximity effect". Nominal or "flat" response is generated at a distance of 24 inches or more. However, as the distance to the sound source decreases, the bass sensitivity increases, providing a solid, robust character.
Requires phantom power.
C195 Cardioid Electret Condenser Microphone
- Generating Element: Electret condenser (Phantom Powered)
- Polar Pattern: Unidirectional (Cardioid)
- Frequency Response: 50Hz-18kHz
Output Level:
- Open Circuit Voltage: -55 dB (0 dB = 1 volt per microbar)
- Impedance: 500 ohms
- Dynamic Range: 110 dB
- Equivalent Noise Level: Less than 22 dB, A weighted
- Maximum SPL: 132 dB (1% THD, open circuit)
Powering:
- Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected
- Current Required: Less than 5 mA over operating voltage range
- Phasing
- Positive pressure on diaphragm generates a positive voltage on pin 2 relative to pin 3
- Grille Screen: Hardened Steel Mesh
- Case: Steel and die-cast zinc alloy
- Finish: Durable soft feel, non-slip, titanium gray body, midnight black screen
CAD D10 Cardioid Dynamic Microphone
$ 34.99
The D10 is a cardioid, moving-coil dynamic microphone specifically designed and carefully equalized for kick drum capture and reinforcement. Special attention has been given to enhancing “thump”, “crack” and “click” while reducing “boxiness”.
Although designed for kick drum, excellent results are also obtained when used on floor toms, electric guitar and electric bass cabinets.
The die-cast metal body and hardened protective steel screen provide rugged durability. Integrated swivel mount is included.
- Operating Priciple:......................Dynamic
- Polar Pattern:..............................Cardioid
- Output Connection:............................XLR
- Frequency Response:............50Hz-16kHz
- Pantom Power Requirements:...........None
- Impedance:.................................60 Ohms
- Dimensions:...............................4.2" x 2.4"
- Weight:........................................12.75 oz
- Sensitivity:...........-67dBV (.45mV) @ 1 Pa
- Switch:...............................................None
- RoHS.........................................Compliant
Cad D90 Supercardioid Dynamic Handheld Microphone
$ 99.99 $ 129.99
The CADLive D90 supercardioid dynamic handheld mic is outfitted with a Trueflex diaphragm and PowerGap high- gauss neodymium magnets creating a hot and articulate live performance vocal microphone.
- Pattern: Superardioid
- Principle: Dynamic moving coil motor
- Frequency Response : 50 “ 16kHz
- Sensitivity : -51.0 dBv (2.8mV) @ 1PA
- Impedance : 500 Ohm
- Max SPL >150dB
- UPC : 631922107289
- Weight : 1.5Lbs
- Dims : 10 X 6.5 X 3
CAD e60 Externally Biased Cardioid Condenser Microphone
$ 199.99 $ 299.00
One of Al Di Meola's two favorite acoustic guitar mics for live performance, the Equitek e60 Cardioid Condenser Microphone has externally-biased point-source transduction with a high-power transformerless drive in a bulletproof road-ready housing. Take it on tour for high-impact instrumentation. Features include three-frequency hi-pass filter, 10dB attenuator and integral stand clamp. The microphone's applications include acoustic instrument, guitar cabinets, bass cabinets, strings, piano, cymbals/overheads, kick drum, snare drum, hi-hat.
24V or 48V phantom power required.
FEATURES
- Operating Principle: Externally-biased condenser
- Polar Pattern: Cardioid
- Frequency Response:30Hz to 20KHz
- Sensitivity: -41dBV (8.9mV) @ 1 Pa
- Impedance: 300 ohms
- Max SPL: 140dB, 1% THD, attenuator engaged
- Self Noise: 22dBA
- Hi-pass Filter: 40Hz, 85Hz and 122Hz, 6dB/oct
- Attenuator: 10dB
- Power Requirements: P24, P48, 2mA
CAD ICM417 Cardioid Condenser Microphone
$ 79.99 $ 89.99
Packaged in a rugged small, all metal body, the ICM417 electret condenser microphone provides natural, transparent sound quality. The transformerless design of this cardioid condenser provides optimum low frequency response and low distortion. Designed for use with cymbals, overheads, and stringed instruments, the wide, flat frequency of the ICM417, coupled with the CAD exclusive I.N.R. shockmount, make this an extremely high quality percussion microphone, as well.
CAD MH320 Studio Headphones
$ 69.99 $ 99.99
CAD Audio is introducing the new MH320, closed back, circumaural monitor headphones for a wide range of studio applications.
Precision built and equipped with high output 45mm neodymium drivers, the MH320 feature an extended frequency response with an exceptionally clear and detailed sound. Crafted from high-grade stainless steel, manganese and aluminum, the headphones are built with the durability and solid construction to ensure years of use.
Large, ultra-soft leather earpads outfitted with high-density memory foam provide effective isolation and hours of fatigue-free listening comfort. Accurate, rugged and extremely versatile, the MH320 headphones are an essential tool for superior studio performance and a vital accessory for professional musicians.
CAD Stagepass IEM Stereo Wireless In Ear Monitor System
$ 349.99 $ 459.99
The CAD Audio StagePass™ IEM is a high-performance wireless In Ear Monitor System that will deliver superior audio performance while supplying advanced frequency agility, capable enough to cope with today's dynamic RF environment – make it both easy to use and exciting to operate.
The StagePass™ IEM Stereo Wireless In Ear Monitor System features 16-channel frequency agile performance for outstanding connectivity. CADLock™ Automatic Tone Code Squelch eliminates unauthorized interference in RF unfriendly environments. Stereo operation lends flexibility of use – You may send discrete signals to the left or right channel. The MEB2 TruPitch™ Dual Armature Earbuds provide accurate audio reproduction while the EasyFit™ silicon earmolds provide a custom fit.
CAD Audio StagePass IEM Stereo Wireless In Ear Monitor System Includes:
- Wireless receiver
- Wireless transmitter
- MEB2 TruPitch™ Dual Armature Earbuds
- Half wave antenna
- Rack ears
- Antenna relocation kit
- Carry case
CAD Audio StagePass IEM Stereo Wireless In Ear Monitor System Features:
- 16 Channel UHF Agility for frequency plan flexibility
- Stereo Operation for discrete Right/Left transmission flexibility via combination XLR-1/4" connectors
- CADLock ™ Automatic Tone Encoded Squelch to eliminate unauthorized interference.
- MEB2 TruPitch™ Dual Armature Earbuds provide accurate audio reproduction while the EasyFit™ Silicon molds provide a custom fit
- Metal Chassis Transmitter for a durable and formidable shielded enclosure.
CAD Audio StagePass IEM Stereo Wireless In Ear Monitor System Specifications:
- Frequency Range: Q Band 470-498MHz
- Audio Frequency Response: 40Hz – 16KHz
- Dynamic Range: >101dB
- Dynamic Cardioid Capsule
- Frequency Response: 40Hz – 16KHz
- Transmit power: 30mW
- AA Batteries with >15 hrs battery life
- Audio Input: Combination XLR - 1/4"
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2020 Huber Breese Music. Powered by Shopify
