Products
Ampeg Heritage 50th Anniversary SVT Bass Amplifier Head (300 Watts)
Sold Out $ 3,779.99
Ampeg Heritage 50th Anniversary SVT
The Ampeg SVT is more than just a bass amp -- it sparked a revolution. When it debuted in 1969, deafening walls of full-stack guitar amps were eating bass players alive. Knowing that big bass volume required big power, Ampeg designed the most sophisticated amp of its day: the 300-watt SVT. Finally, balance returned to the stage and with it a generation of iconic bass-forward music was born. That singular Ampeg spirt of innovation and ingenuity is alive and well in the Ampeg Heritage 50th Anniversary SVT bass amp. Designed to honor the unrivaled SVT legacy, the Heritage 50th Anniversary SVT distills the legendary amp’s most celebrated circuits into a single stage-ready head with a host of must-have modern technology and elegant vintage aesthetics. It truly is the SVT for the 21st century.Customers Asked, Ampeg Delivered
From well-informed amateurs to elite professionals, no amp enjoys as passionate of a fanbase as the Ampeg SVT. For this new SVT, Ampeg surveyed its loyal customers to ensure that the design met and surpassed their wishlist. While each generation of the SVT has its faithful, Ampeg designed the Heritage 50th Anniversary SVT to satisfy even the most discerning SVT aficionados. It’s the SVT everyone has been asking for.Three Amps In One
The Heritage 50th Anniversary SVT offers two discrete preamp channels that duplicate the revered tone from the amp’s most desirable eras: the original 1969 “Blueline” SVT and the mid-70s Magnavox design. Even better: players can jump the two channels together for an even more aggressive all-new sound. To make sure the new SVT delivers all this titanic tone reliably, Ampeg supplies a sextet of specially sourced and matched Ampeg Super Valve 6550 tubes.Modern Features, Legendary Tone
While Bill Hughes and Roger Cox got so much right with the original 1969 “Super Valve Technology” (SVT) amp, contemporary players expect their amps to offer features that hadn’t been invented back then. That’s why the Heritage 50th Anniversary SVT offers a suite of functional enhancements like a newly enhanced balanced XLR DI output, simple user-biasing, a whisper-quiet fan to promote tube life, and a robust Neutrik speakOn jack for connection to any modern speaker cabinet. Perhaps most important to Ampeg customers, the Heritage 50th Anniversary SVT is handmade in the U.S.A. from durable top-shelf components—it’s as American as Rock & Roll.Period-Correct Graphics And Fonts
Few amps look the part like an original “Blueline” SVT, with its engraved blue text and lines that surround the tone controls and input jacks. Ampeg went to great lengths to ensure the Heritage 50th Anniversary head had that instant-vintage wow-factor. Collectors and players alike will love the etched Blueline graphics and text with pitch-perfect period detail and spot-on spring-loaded side handles.Features
- The 1969 “Blueline” and mid-1970s Magnavox-era circuits in one amp
- Handmade in the U.S.A. from durable top-shelf components
- Detailed, period-correct graphics and fonts
- Modern features include a newly enhanced XLR DI output, user biasing, speakOn outputs, and spring-loaded side handles
- Specially sourced and matched Ampeg Super Valve 6550 tubes
- Not a reissue—the ultimate SVT for today
Ampeg Micro VR 200W Bass Amlifier Head
$ 299.99 $ 419.99
Don't be fooled by its diminutive appearance; the Ampeg Micro-VR is a compact powerhouse fully capable of pumping its 200W of genuine Round Sound into myriad live and recording situations. The portable, powerful solid-state bass amp head is a pleasant surprise from the second you lay eyes on it to the moment its indisputable Ampeg tone hits your ears.
- Boasts 200W of power
- Ultracompact construction
- Preamp: Solid State
- Power Amp: MOSFET
- RMS Power Output: 200W @ 4 ohms
- Tone Controls: 3-Band
- Mid Tone Control: Ultra Mid
- Balanced Line Out: with Pre/Post and Pad
- Dimensions: 12" W x 5-1/2" H x 10" D
Ampeg SVT410HLF Classic Series Bass Amplifier Cabinet
$ 899.99 $ 1,199.99
Greater low-end response, perfect for 5-string players!
The Ampeg SVT-410HLF Enclosure gives you plenty of volume and clean low end. This 4x10" cabinet has the same speakers and 1" horn as the SVT-410HE with 2" coils and 30 oz. magnets, but the cabinet itself is tuned differently. It's deeper and has a bottom port that results in better low-end response, down to 28Hz!
The cabinet features heavy duty recessed handles, an industrial strength grip bar, and heavy duty rear wheels. Skid rails are placed on the back of the enclosure to protect it while loading in and out of venues.
The Speakon and 1/4" jacks are wired in parallel, allowing easy daisy chaining from one speaker to another. Each of the jacks may be used as an input or a through connection.
FEATURES
- Ultra-low frequency response for bottom end that never ends
- Rear wheels and recessed handles make transport easier
- Skid rails for increased durability
SVT-410HLF Classic Series Bass Cabinet
- Type: 4x10 bass enclosure
- Freq response (+/-3db): 48hz-18khz
- Usable low freq (-10db): 28hz
- RMS power handling: 500 watts
- Peak power handling: 1000 watts
- Impedance: 4 ohms
- Sensitivity: 98db spl 1w/1m
- Maximum SPL: 125db
- Components: 4 custom designed 100 watt 10" speakers, 1 high frequency horn
- 30"W x 24"H x 19"D
- 76 lb.
Ampeg SVT7PRO Bass Amplifier Head
$ 799.99 $ 1,119.99
The SVT-7PRO pumps out a ferocious kilowatt of pure Ampeg tone in a compact design that weighs in at just 15 pounds. The SVT-7PRO features the same professional features as the other PRO Series heads including a flexible 5-position mid tone control, remote switching FX loop and a sleek onboard variable compressor.
The tube preamp boasts a premium JJ 12AX7 that feeds the weight-defying Class-D power section. It's portable and small but can power everything from a small single PN-115HLF up to a monster Heritage SVT-810E.
- RMS power output:
- 1000 watts @ 4 ohms
- 600 watts @ 8 ohms
- Preamp: Tube (1 JJ 12AX7)
- Power amp: Class D
- Tone controls: Bass, mid, treble
- Mid-tone control: 5-position
- Ultra low/high boosts
- Onboard variable compressor
- Transformer balanced line out
- Includes removable rack ears
Ampeg V-4B Tube Bass Amplifier Head
$ 1,499.99 $ 1,819.99
The Ampeg V-4B 100W All-Tube Bass Head embodies the legendary tone of the classic V-4B in a portable, modern design perfect for today's players. From the unique chassis suspension system to the vintage rocker switches, the attention to detail is all there. Plus, with a careful selection of modern features like an integrated DI and a wide choice of speaker output options, we've ensured the flexibility and functionality you demand from a modern head. With the 100W V-4B, you get the sought-after tone of a fully-cranked Ampeg tube amp in a design that's less than half the weight of an SVT.
- 100W of all-tube Ampeg bass tone
- Ultra Hi/Lo boost
- 3-band EQ (bass, midrange, treble)
- 3-position mid-range control
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2020 Huber Breese Music. Powered by Shopify
