Products
Ampeg Heritage 50th Anniversary SVT Bass Amp Head
$ 2,999.99 $ 4,199.98
The Ampeg® SVT® is more than just a bass amp—it sparked a revolution. When it debuted in 1969, deafening walls of full-stack guitar amps were eating bass players alive. Knowing that big bass volume required big power, Ampeg designed the most sophisticated amp of its day: the 300-watt SVT. Finally, balance returned to the stage and with it a generation of iconic bass-forward music was born. That singular Ampeg spirt of innovation and ingenuity is alive and well in the Ampeg HeritageTM 50th Anniversary SVT bass amp. Designed to honor the unrivaled SVT legacy, the Heritage 50th Anniversary SVT distills the legendary amp’s most celebrated circuits into a single stage-ready head with a host of must-have modern technology and elegant vintage aesthetics. It truly is the SVT for the 21st century.
- The 1969 “Blue Line” and mid-1970s Magnavox-era circuits in one amp
- Handmade in the U.S.A. from durable top-shelf components
- Detailed, period-correct graphics and fonts
- Modern features include a newly enhanced XLR DI output, user biasing, speakOn® outputs, and spring-loaded side handles
- Specially sourced and matched Ampeg Super ValveTM 6550 tubes
- Not a reissue—the ultimate SVT for today
YOU ASKED FOR IT
From well-informed amateurs to elite professionals, no amp enjoys as passionate a fan base as the Ampeg SVT. For this new SVT, Ampeg surveyed its loyal customers to ensure that the design met and surpassed what’s on their wish lists. While each generation of the SVT has its faithful, Ampeg designed the Heritage 50th Anniversary SVT to satisfy even the most discerning SVT aficionados. It’s the SVT everyone has been asking for.
SPECIFICATIONS
- Preamp Tubes: 5 x 12AX7
- Driver Tubes: 1 x 12AX7, 2 x 12AU7
- Power Amp Tubes: Ampeg Super Valve (6 x 6550)
- Output Power Rating: 300W RMS minimum continuous @ <5% THD into @ 2 or 4
- Signal-to-Noise Ratio: (20 Hz – 20 kHz) 75 75 dB (20 Hz - 20 kHz)
- Maximum Gain: 78 dB @ 1 kHz –3 dB @ 20 Hz & 15 kHz
- Tone Controls
- Channel One: Voiced after original 1969 "Blue Line" SVT (jumpable)
- Channel Two: Voiced after mid 70's Magnavox era SVT (jumpable)
- Bass: +12/-12 dB @ 40 Hz
- Midrange: +10/-20 dB @ 220 Hz, 450 Hz, 800 Hz, 1.6 kHz, or 3 kHz
- Treble: +15/–20 dB @ 4 kHz
- Ultra Lo: +2 dB @ 40 Hz, -10 dB @ 500 Hz
- Ultra Hi: +9 dB @ 8 kHz
IDEAL CABINETS
- Heritage HSVT-810AV
- Classic SVT-810AV
- Classic SVT-212AV
- Classic SVT-112AV
Ampeg PF-50T Bass Amplifier Head
$ 999.99 $ 1,459.98
The legendary tone and portability of the all-tube Ampeg Portaflex amplifiers is faithfully reproduced in the PF-50T. This all-tube Portaflex head provides a harmonically rich and studio-worthy 50 watts of pure Ampeg tone to satisfy the most discerning bass player. Featur ing simple user-adjustable bias adjustment for easy tube replacement and pre-amp and transformer balanced direct outs for maximum versatility. Plus, no speaker load is required for silent recording or even use as a dedicated tube DI. Pair it with the PF-112HLF for the ultimate compact all-tube bass rig.
FEATURES
- RMS power output:50W @ 4 or 8 ohms
- Preamp: All-tube [2] x 12AX7
- Power amp: All-tube [1] x 12AU7, [2] x 6L6
- 0db and -15db inputs
- Tone controls: Bass, Mid, Treble
- Mid-tone control: 5-position
- Ultra Hi/Lo boosts
- Input gain control
- Preamp balanced line out
- Pre/Post EQ
- Ground lift
- Transformer balanced line out
- Ground lift
- User adjustable bias control
- Dimensions (H x W x D inches):
- 7.3 x 13.9 x 10.4 in
- 185 x 353 x 264 mm
- Weight: 19.4 lb / 8.8 kg
Ampeg RB-112 Rocket Bass Combo Amplifier
$ 429.99 $ 559.00
The 100-watt RB-112 features a custom 12" Eminence® speaker and is a perfect choice for practicing, performing, and recording. Classic Ampeg 3-band EQ and Ultra Hi/Ultra Lo switches, combined with the new Super Grit Technology™ overdrive circuit, enable you to easily dial in legendary Ampeg tone. Additional features include an auxiliary input, a headphone output, an effects loop, and an XLR output that provides a professional connection to a P.A. or recorder.
- 100 watts
- 12" Custom Eminence speaker
- Vintage styling with modern features
- Ampeg Legacy preamp
- Footswitchable SGT™ overdrive
- Auxiliary input and headphone output
- Effects loop
- XLR direct output
- 25.9 lbs. (11.75 kg)
Ampeg Rocket Bass 108 30W Bass Combo Amp - Black and Silver
$ 199.99 $ 259.98
Main Features
- 30W, 1 channel
- Solid-state amplifier
- 3-band EQ, Super Grit overdrive, Headphone out, auxiliary in
- 1x8 speaker
Lightweight and Powerful
Weighing only 23 lb., it's a cinch to lift the Rocket Bass and carry it from the bedroom to the garage, or wherever you want to play. The solid-state power section is 30 watts, more than enough for practice through the efficient 8" speaker.Super Grit Technology/3-band EQ
Clean tone is great for Sunday morning jam sessions, but when it’s time to kick it up a notch, the Rocket Bass is ready. The Super Grit overdrive provides more punch, and the 3-band EQ allows further sonic sculpting to dial in a variety of bass tones.Practice Anytime
Playing a musical instrument requires a lifetime of practice, but when others are around, it can be difficult. Fortunately, the RB 108 has a headphone output for silent play. The auxiliary input connects to any external audio source, making it possible to jam along with any band.Vintage Style
Ampeg first made its mark in 1960 with the introduction of the groundbreaking Portaflex bass amp. The Rocket Bass 108 fits into the family with its vintage-style diamond checkerboard Tolex covering and silver grille cloth.- 30-watt 1x8 combo
- Vintage styling with modern features
- Ampeg Legacy preamp
- Super Grit Technology (SGT™) overdrive
- 0dB and -15dB inputs
- Auxiliary input and headphone output
- 23 lbs. (10.5 kg)
Ampeg Rocket Bass 110 Bass Combo Amplifier - Black / Silver
$ 279.99 $ 389.98
RB-110
The 50-watt RB-110 is an ideal amp for practicing and playing small venues. Classic 3-band EQ and the new Super Grit Technology™ overdrive make it easy to dial in legendary Ampeg tone. Plus, an auxiliary input lets you play along with external audio, while a headphone output ensures you’ll be able to practice whenever you like without disturbing others. An XLR output provides a professional connection to a P.A. or recorder.
- 50-watt 1x10 combo
- Vintage styling with modern features
- Ampeg Legacy preamp
- Super Grit Technology (SGT™) overdrive
- 0dB and -15dB inputs
- Auxiliary input and headphone output
- XLR direct output
- 22.5 lbs. (10.2 kg)
Ampeg Rocket Bass 115 Bass Amp Combo - Black/ Silver
$ 559.99 $ 727.98
RB-115
The 200-watt RB-115 is an exceptional gigging and recording amplifier with a custom 15" Eminence® speaker. Classic Ampeg 3-band EQ and Ultra Hi/Ultra Lo switches combine with the new Super Grit Technology™ overdrive circuit to deliver legendary Ampeg tone. Additional features include an auxiliary input, a headphone output, an effects loop, an extension speaker output, and an XLR output that provides a professional connection to a P.A. or recorder.
- 200 watts
- 15" Custom Eminence speaker
- Ampeg Legacy preamp with 3-band EQ
- Footswitchable SGT™ overdrive
- Auxiliary input and headphone output
- Effects loop
- Extension speaker and XLR direct outputs
- 34 lbs. (15.45 kg)
Ampeg Rocket Bass 210 500W Bass Combo Amplifier - Black/Silver
Sold Out $ 923.98
The Ampeg Rocket Bass 210 amp is a high-performance amp that packs 500 watts of power into a portable cabinet. It features a 3-band EQ, an overdrive circuit and an effects loop to expand the tonal possibilities, while an XLR output directly connects to a PA or recorder. An auxiliary input makes it easy to jam to external audio sources, and a headphone out keeps the noise levels down for the neighbors. Containing dual 10” Custom Eminence speakers plus an HF horn, the RB 210 is the ideal combo for the gigging bassist.
Main Features
- 500W
- Solid-state amplifier, 3-band EQ, Super Grit overdrive (footswitch-capable), effects loop
- XLR out, headphone out, auxiliary in
- Dual 10" Eminence speakers, high-frequency horn
Powerful and Lightweight
Weighing only 39 lb., it's easy to move the Rocket Bass 210 from the bedroom to the garage, or into the van for the next gig. The solid-state power section delivers 500 screaming watts. Dual 10" custom Eminence speakers and a mutable high-frequency horn spread your sound to rock the house or the whole stage.Super Grit Technology/3-band EQ
Clean tone is great for Sunday morning jam sessions, but when it’s time to kick it up a notch, the Rocket Bass is ready. The Super Grit overdrive provides more punch and, combined with the 3-band EQ and Ultra Hi/Ultra Lo switches, allows further sonic sculpting to dial in a variety of bass tones. Pedal overdrive just doesn’t compare to authentic amp overdrive, and the Rocket Bass is as genuine as they come.Practice on Your Own Schedule
Playing a musical instrument requires a lifetime of practice, but when others are around, it can be difficult. Fortunately, the RB 210 has a headphone output for silent play. The auxiliary input connects to any external audio source, making it possible to play along with any band. An XLR out makes it easy to plug in to the board, or plug in an external cabinet with the extension speaker out.Vintage Style
Streamlined ’60s style puts the focus right where it should be—on stellar bass tone. The Rocket Bass RB 210 features easily accessible top-mounted controls and a classic vintage design that sets the stage perfectly for laying down bass grooves from any era.
Features
- 500 watts
- Dual 10" Custom Eminence speakers + HF horn
- Ampeg Legacy preamp with 3-band EQ
- Footswitchable SGT overdrive
- Auxiliary input and headphone output
- Effects loop
- Extension speaker and XLR direct outputs
- 39 lb. (17.7 kg)
- 500 watts
- Dual 10" Custom Eminence speakers+ HF horn
- Ampeg Legacy preampwith 3-band EQ
- Footswitchable SGT overdrive
- Auxiliary input and headphone output
- Effects loop
- Extension speaker and XLR direct outputs
- 39 lbs. (17.7kg
Ampeg SVT-212AV 600W 2x12 Bass Speaker Cabinet - Black
$ 849.99 $ 1,104.98
Features
- Power handling: 600W RMS at 4ohms
- Speakers: 2x12" Custom Eminence LF drivers; 1" compression driver with 3-way level control
- Optional classic black grille cloth
Ampeg SVT-4Pro Bass Amplifier Head
$ 1,849.99 $ 2,700.98
SVT-4 PRO is designed for the player who wants SVT tone and performance (with a few modern enhancements) in a convenient 3U rackmount design. In the world of high performance bass amps, the Ampeg SVT-4 PRO has what it takes to define your sound.
The Ampeg® SVT® line of pro-level amps is synonymous with power and durability. The SVT-4PRO crystallizes this philosophy, delivering more performance, flexibility, and power than any other amp in its class.
In true SVT tradition, the SVT-4PRO is capable of a huge variety of must-have sounds at high volume over extended periods of time. To achieve this, Ampeg packed a ton of tone-sculpting into its burly 3U chassis, mating the extensive preamp with dual high-output Class AB power amps. In addition to Ampeg’s classic 5-position Midrange control, which allows you to dial in the center frequency of the peaking midrange filter, there’s shelving bass and treble filters, and—if that weren’t enough—nine bands of carefully chosen graphic EQ. You can even use the graphic EQ as a “second channel,” making an alternate sound as easy as a tap on a footswitch.
Thanks to its hybrid tube/solid-state design, the SVT-4PRO delivers signature fat and warm Ampeg Round Sound, plus the entire sonic palette that players of any stripe might need to get the job done.
- 300 watts x 2; 900 watts mono-bridged @ 8 Ohms
- 490 watts x 2; 1,200 watts mono-bridged @ 4 Ohms
- 600 watts x 2 @ 2 ohms
- Defeatable Optocoupler limiters
- 1/4" and Neutrik® speakON® outputs
- Bi-ampable with stereo/bridgeable power amps and variable 24dB/octave crossover
- Onboard compressor with variable ratio (1:1–10:1)
- 9-band graphic EQ
- 39.6 lb (17.9 kg)
Ampeg SVT210AV Bass Cabinet
$ 399.99 $ 519.98
The Ampeg SVT210AV is the portable alternative to a full sized SVT cab. Ideal for bleed-sensitive recording situations where the SVT810-AV can be too loud and live situations where it can be too large, the SVT210AV is designed using Ampeg's legendary Infinite Baffle ™ system for maximum speaker efficiency and true Ampeg tone.
Specs:
- 2x10 Eminence® Custom Designed (sealed cabinet)
- 200 Watts
- 8 Ohms
- 15mm Poplar-ply construction
- 25.9 lb (11.7 kg)
Ampeg V-4B Tube Bass Amplifier Head
$ 1,599.99 $ 2,335.98
The Ampeg V-4B 100W All-Tube Bass Head embodies the legendary tone of the classic V-4B in a portable, modern design perfect for today's players. From the unique chassis suspension system to the vintage rocker switches, the attention to detail is all there. Plus, with a careful selection of modern features like an integrated DI and a wide choice of speaker output options, we've ensured the flexibility and functionality you demand from a modern head. With the 100W V-4B, you get the sought-after tone of a fully-cranked Ampeg tube amp in a design that's less than half the weight of an SVT.
- 100W of all-tube Ampeg bass tone
- Ultra Hi/Lo boost
- 3-band EQ (bass, midrange, treble)
- 3-position mid-range control
Ampeg VB-212 Bass Cabinet
$ 1,099.99 $ 1,539.98
VENTURE VB-212
GO ANYWHERE™
Ampeg Venture® Series amplifiers and cabinets deliver the modern style and features sought by contemporary bassists—continuing a tradition of innovation that stretches back to the dawn of the electric bass. The Venture VB-212 bass cab weighs 40 pounds and handles 500 watts RMS/1000 watts Program power (8Ω)—making it perfect for modern gigging bassists on the go. The VB-212 features two custom-voiced Lavoce® neodymium woofers and a variable high-frequency driver. This stylish front-ported cab is ruggedly constructed and covered in carbon fiber-style Tolex, so it will hold up gig after gig, while at the same being one of the lightest 2x12 bass enclosures currently available. An optional Portaflex®-style grille assembly offers an aesthetic alternative. Use as a large-format single cabinet or combined with an additional VB-212 to build your ultimate stage rig. Pair with a Venture head and add an optional padded cover.
FEATURES |
|
● 500 watts RMS/1000 watts Program @ 8Ω ● Ultra-lightweight yet rugged construction ● Carbon fiber-style Tolex covering and modern Ampeg logo ● Custom Lavoce neodymium woofers and high-frequency driver |
● Variable high-frequency attenuator ● Neutrik® speakON® inputs ● 40 lbs. |
Eden TN501 500W Bass Amp Head USED
$ 500.00
The Eden Terra Nova TN501 is designed to offer players the ability to travel light without compromising on the features they need to get great tone. The Terra Nova series delivers optimal tone delivery while keeping its amplifiers and enclosures as compact as possible.
The TN501 is great for rehearsal and small bars as well as having a great DI out for when you need to use the front of house system. Getting great sounds from your amplifier is simple using the semi- parametric mid section and Eden's proprietary enhance EQ sweep.
TN501 500W Bass Amp Head Specifications:
- Power: 500W
- Single channel
- Two inputs: active, passive
- Controls: 4-band EQ with semi-parametric mid controls, input gain, enhance, master, mute, compressor, boost
- FX loop
- XLR direct output
- Tuner output
- Aux. input
- Headphone output
- Dimensions: 3.1" x 12.75" x 6.9"
- Weight: 5.3 lb.
- Footswitch sold separately
**This Bass amp head was used for a year, it's in great condition**
Fender Adam Clayton ACB 50 Bass Amplifier - Black
$ 2,099.99 $ 2,948.00
Inspired by Adam Clayton, the Fender ACB 50 signature bass amplifier offers warm, harmonically rich tube tones that are perfect for the studio, club or arena stage. Featuring two distinctly different channels – a classic Fender mid-scooped sound and a more modern hi-fi, flat EQ tone, the ACB 50 achieves all the sounds you need in any musical situation.
Classic cosmetics, chrome panel and chicken head knobs replicate that classic Fender look that players around the world have come to love. The ACB 50 includes a lightweight Eminence® Neo 15” speaker that helps accentuate its fat, powerful sound and features an XLR line out to send that great tone to your home recording rig or front-of-house.
- Model Number: 2248500000
FEATURES
- Designed in collaboration with Adam Clayton of U2
- 50 watts
- Preamp Tubes: (3) 12AX7 and (1) 12AT7
- Output Tubes: (2) 6L6
- Independent Channels – (2) Classic Fender Sound & Flatter Frequency Sound
- 15” Eminence neodymium speaker
- Transformer-coupled XLR out with ground lift
- Chrome Panel and chicken-head knobs
- Ported enclosure with lightweight plywood
SPECS
General
- Artist Signature
- Black
- Tube
- MX
Electronics
- Channel 1: Volume, Treble, Middle, Mid Frequency, Bass; Channel 2: Volume, Treble, Middle, Bass
- Two - 1/4"
- Two - (One XLR and One 1/4")
- Two
- 120V
- 50 Watts at 8 ohms
Hardware
- Black Chicken-Head Style Pointer
- Black Textured Vinyl
- Aged Silver
- Molded Plastic Strap with Nickel-Plated Caps
- Ground Lift Switch
Speakers
- One - 15" Fender® Special Design Eminence® Neodymium
- 8 ohms
Tubes
- 2 x 6L6
- 3 x 12AX7, 1 x 12AT7
Measurements
- 14" (35.5 cm)
- 23" (58.42 cm)
- 24.25" (61.5 cm)
- 2 x 6L6
Accessories
- NA
Miscellaneous
- IEC
Fender Bassman 800 Bass Amplifier Head - Black/Silver
$ 1,309.99 $ 1,696.00
Combining the best of authentic Fender bass sound with modern power, the Bassman 800 Head is an easily portable powerhouse with flexible, thunderous tone. Designed for the ultimate bass playing experience, it offers two versatile channels, classic good looks, and ultra-musical Fender tube tones—all in a lightweight chassis (only 17 lbs.) that mates perfectly with Bassman Pro Neo speaker cabinets to create a tonal monster.
- Model #: 2249700000
Product Specs
General
- Amplifier Type: Hybrid (Tube/Solid State)
- Color: Black and Silver
- Country Of Origin: MX
- Series: Bassman® PRO
Electronics
- Channels: Two - (Vintage and Overdrive)
- Connection Type: IEC
- Control Panel: Vintage: Volume, Bass (Pull Deep), Mid, Treble (Pull Bright); Overdrive: Gain, Blend, Volume, Bass (Pull Deep), Mid, Frequency, Mid Level, Treble (Pull Bright); Master (Pull Mute)
- Controls: Vintage: Volume, Bass (Pull Deep), Mid, Treble (Pull Bright); Overdrive: Gain, Blend, Volume, Bass (Pull Deep), Mid, Frequency, Mid Level, Treble (Pull Bright); Master (Pull Mute)
- Effects: Tube Overdrive
- Effects Loop: 1/4" - (Preamp Out, Power Amp In)
- Inputs: Two - (1/4", Input 2 operates at -6dB)
- Line Out: One - (XLR with Ground Lift, Level Control, and Pre/Post EQ Switch)
- Voltage: 120V
- Wattage: 800 Watts RMS output at 4 ohms
Hardware
- Amplifier Jewel Red Jewel
- Cabinet Material: 7-Ply 5/8" Meranti Plywood
- Control Knobs: Vintage-Style Skirted Black Plastic
- Front Panel: Black
- Grille Cloth: Black and Silver Strand
- Handle: Molded Rubber "Dog Bone" Style
- Speaker Jack: Two Speakon 1/4" Combo Jacks
Miscellaneous
- Power Cable: IEC
Speakers
- Speakers: N/A
- Total Impedance: 4, 8, or 16 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: 2 x 12AX7
- Rectifier: Solid State
Accessories
- Footswitch: 1-Button (Channel Select), P/N: 0994052000 (Included)
Measurements
- Power Tubes: NA
- Product Depth: 10.53" (26.7 cm)
- Product Height: 8.6" (21.9 cm)
- Product Width: 22.37" (56.81 cm)
Fender Rumble 100 (V3) Bass Amplifier - Black/Silver
Sold Out $ 453.00
For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.
The stylish Rumble 100 combo pumps 100 watts of pure Fender bass muscle and finesse. Lighter and louder than ever, it's built with great features including classic Fender styling, 12" Eminence® speaker, overdrive circuit, versatile three-button voicing and more. A must-have combo for any bassist.
- Model #: 2370400000
Product Specs
General
- Amplifier Type: Class-D
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
- Connection Type: IEC
- Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Effects Loop: 1/4" (Send/Return)
- Inputs: One - 1/4"
- Line Out: One - (XLR with Ground Lift)
- Voltage: 120V
- Wattage: 100 Watts at 8 Ohms
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: Lightweight Plywood
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Speakers
- Speakers: One - 12" Eminence® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Miscellaneous
- Power Cable: IEC
Accessories
- Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)
Measurements
- Power Tubes: NA
- Product Depth: 14" (35.56 cm)
- Product Height: 18.5" (47.0 cm)
- Product Width: 16.5" (41.91 cm)
Fender Rumble 115 (V3) Bass Amplifier - Black/Silver
$ 419.99 $ 532.00
- Model #: 2370900000
Product Specs
General
- Series: Rumble™
- Color: Black and Silver
- Amplifier Type: Speaker Enclosure
- Country Of Origin: ID
- Platform: Rumble
Electronics
- Inputs: NA
- Power Handling: 600 watts program (300 watts continuous)
Hardware
- Amplifier Covering: Black Textured Vinyl
- Cabinet Material: Lightweight Plywood
- Grille Cloth: Silver
- Handle: Recessed Side-Mounted Steel Bar (2)
- Casters: Pop-out Casters Included
- Speaker Jack: One 1/4", One Speakon
Speakers
- Speakers: One - 15" Eminence®-Designed Ceramic Magnet Speaker
- Total Impedance: 8 ohms
Measurements
- Product Depth: 14.5" (36.8 cm)
- Product Height: 20.75" (52.7 cm)
- Product Width: 23" (58.42 cm)
Fender Rumble 15 (V3) Bass Amplifier - Black/Silver
$ 94.99 $ 142.50
- Model #: 2370100000
Product Specs
General
- Amplifier Type: Solid State
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One
- Connection Type: IEC
- Control Panel: Volume, Bass, Middle, Treble
- Controls: Volume, Bass, Middle, Treble
- Effects Loop: NA
- Inputs: One - 1/4"
- Line Out: NA
- Voltage: 120V
- Wattage: 15 Watts at 8 ohms
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: NA
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Miscellaneous
- Power Cable: IEC
Speakers
- Speakers: One - 8" Fender® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Accessories
- Footswitch: NA
Measurements
- Power Tubes: NA
- Product Depth: 8" (20.3 cm)
- Product Height: 14.96" (38 cm)
- Product Width: 14.96" (38 cm)
Fender Rumble 200 (V3) Bass Amplifier - Black/Silver
$ 609.99 $ 752.00
For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.
On sight alone, you might not believe that the stylish diminutive Rumble 200 combo actually pumps 200 watts of pure bass muscle and finesse, but it does exactly that. Lighter and louder than ever, it's built with great features including classic Fender styling, 15" Eminence® speaker and compression horn, overdrive circuit, versatile three-button voicing and more.
- Model #: 2370500000
Product Specs
General
- Amplifier Type: Class-D
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
- Connection Type: IEC
- Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Effects Loop: 1/4" (Send/Return)
- Inputs: One - 1/4"
- Line Out: One - (XLR with Ground Lift)
- Voltage: 120V
- Wattage: 200 Watts at 4 ohms (with Extension Cabinet), 140 Watts at 8 ohms (Internal)
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: Lightweight Plywood
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Speakers
- Speakers: One - 15" Eminence®-Designed Ceramic Magnet Speaker
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Miscellaneous
- Power Cable: IEC
Accessories
- Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)
Measurements
- Power Tubes: NA
- Product Depth: 14" (35.56 cm)
- Product Height: 23" (58.42 cm)
- Product Width: 19" (48.3 cm)
Fender Rumble 210 Bass Amplifier Cabinet - Black/Silver
$ 524.99 $ 662.00
- Model #: 2380100000
Product Specs
General
- Amplifier Type: Speaker Enclosure
- Color: Black and Silver
- Country Of Origin: CN
- Platform: Rumble
- Series: Rumble™
Electronics
- Inputs: NA
- Power Handling: 700 Watts (Program), 350 Watts (Continous) Handling Capability
Hardware
- Amplifier Covering: Black Textured Vinyl
- Cabinet Material: Lightweight Plywood
- Grille Cloth: Silver
- Handle: Recessed Side-Mounted Steel Bar (2)
- Speaker Jack: One 1/4", One Speakon
Speakers
- Speakers: Two - 10" Eminence® Ceramic Magnet
- Total Impedance: 8 ohms
Measurements
- Product Depth: 14" (35.56 cm)
- Product Height: 23" (58.42 cm)
- Product Width: 19" (48.3 cm)
Fender Rumble 25 (V3) Bass Amplifier - Black/Silver
$ 139.99 $ 196.00
- Model #: 2370200000
Product Specs
General
- Amplifier Type: Solid State
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One - (with Selectable Overdrive and Contour)
- Connection Type: IEC
- Control Panel: Volume, Overdrive On/Off, Bass, Contour On/Off, Mid, Treble
- Controls: Volume, Overdrive On/Off, Bass, Contour On/Off, Mid, Treble
- Effects Loop: NA
- Inputs: One - 1/4"
- Line Out: NA
- Voltage: 120V
- Wattage: 25 Watts at 8 ohms
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: NA
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Speakers
- Speakers: One - 8" Fender® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Miscellaneous
- Power Cable: IEC
Accessories
- Footswitch: NA
Measurements
- Power Tubes: NA
- Product Depth: 11" (27.94 cm)
- Product Height: 15.25" (38.73 cm)
- Product Width: 15.25" (38.73 cm)
Fender Rumble 40 (V3) Bass Combo Amplifier - Black/Silver
$ 239.99 $ 285.20
For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features. The stylish Rumble 40 combo pumps 40 watts of pure Fender bass tone. Light and loud, it's built with great features including classic Fender styling, 10" speaker, overdrive circuit, versatile three-button voicing and more. A great combo for any bassist.
- Model #: 2370300000
Specs
General
- Amplifier Type: Solid State
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
- Connection Type: IEC
- Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Effects Loop: NA
- Inputs: One - 1/4"
- Line Out: One - (XLR with Ground Lift)
- Voltage: 120V
- Wattage: 40 Watts at 8 ohms
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: Lightweight Plywood
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Speakers
- Speakers: One - 10" Fender® Special Design
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Miscellaneous
- Power Cable: IEC
Accessories
- Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)
Measurements
- Power Tubes: NA
- Product Depth: 12" (30.5 cm)
- Product Height: 16.5" (41.91 cm)
- Product Width: 16.5" (41.91 cm)
Fender Rumble 500 (V3) Bass Amplifier - Black/Silver
$ 679.99 $ 883.00
For bassists everywhere at all levels, Rumble bass combos are re-engineered to be astoundingly compact, portable and lightweight, with seismic Fender bass tone and stage-worthy features.
On sight alone, you might not believe that the stylishly diminutive Rumble 500 combo pumps an astounding 500 watts of pure bass muscle and finesse, but it does exactly that. Lighter and louder than ever, it's built with great features including classic Fender styling, dual 10" Eminence® speakers and compression horn, overdrive circuit, versatile three-button voicing and more. A must-have combo for the gigging bassist.
- Model #: 2370600000
Product Specs
General
- Amplifier Type: Class-D
- Color: Black and Silver
- Country Of Origin: ID
- Platform: Rumble
- Series: Rumble™
Electronics
- Channels: One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
- Connection Type: IEC
- Control Panel: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Controls: Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume
- Effects Loop: 1/4" (Send/Return)
- Inputs: One - 1/4"
- Line Out: One - (XLR with Ground Lift)
- Voltage: 120V
- Wattage: 500 Watts at 4 ohms (with External Speaker), 350 Watts at 8 ohms (Internal)
Hardware
- Amplifier Covering: Black Textured Vinyl
- Amplifier Jewel: Red LED
- Cabinet Material: Lightweight Plywood
- Control Knobs: Vintage-Style Radio
- Front Panel: Painted Metal
- Grille Cloth: Silver
- Handle: Molded Plastic Strap with Nickel-Plated Caps
- Speaker Jack: NA
Speakers
- Speakers: Two - 10" Eminence®-Designed Ceramic Magnet
- Total Impedance: 8 ohms
Tubes
- Power Tubes: NA
- Preamp Tubes: NA
- Rectifier: NA
Miscellaneous
- Power Cable: IEC
Accessories
- Footswitch: 1-Button Economy (P/N: 0994049000), Vintage (P/N: 0994054000), LED (P/N: 0994052000) (All Footswitches Not Included)
Measurements
- Power Tubes: NA
- Product Depth: 14" (35.56 cm)
- Product Height: 23" (58.42 cm)
- Product Width: 19" (48.3 cm)
Fender Rumble 800 Combo Bass Amplifier - Black/Silver
$ 889.99 $ 1,146.00
Delivering powerful tone and classic style, the Rumble 800 has everything that Fender bass amps are famous for – and more. With new pro features and 800 watts of thunderous power, this lightweight bass combo is the ultimate rig for any stage or studio.
Joining the world’s best-selling line of bass amps, the Rumble 800 combo features impressive headroom and punch from its dual 10” Eminence® neodymium speakers and compression horn. With versatile 3-button voicing, a dynamic overdrive circuit and output power attenuation, the Rumble 800 delivers stunning power and sonic versatility for any style of music.
- Model #: 2372100000
Product Specs
General
- Rumble
- Black
- Class-D
- ID
Electronics
- Gain, Bright On/Off, Contour On/Off, Vintage On/Off, Drive, Overdrive On/Off, Level, Bass, Low-Mid, High-Mid, Treble, Master Volume, Full/Low Power Switch
- One 1/4"
- One - (XLR with Ground Lift)
- One - (with Selectable Bright Switch, Contour, Vintage Switch and Overdrive)
- 120V
- 800 Watts
Hardware
- Vintage-Style Radio
- Black Textured Vinyl
- Silver
- Molded Plastic Strap with Nickel-Plated Caps
Speakers
- Two - 10" Custom-Designed Eminence® Neodymium
- 8 ohms
Measurements
- 18.20x22.90x27.70 IN
Accessories
- 1-Button Footswitch Included
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2025 Huber Breese Music. Powered by Shopify
