$ 220.00
**This pedal is used and being sold on consignment. It is in very good condition with little to no signs of wear. The price has been adjusted accordingly.
The PLASMA Coil is a special version of the PLASMA Pedal, created by Gamechanger Audio and Third Man Records.
At its heart is GCA's innovative High Voltage Distortion technology that expresses audio signal as a series of electrical discharges. Even though they've been printing the words: "High Voltage Rock'n'Roll" on AC/DC t-shirts since 1973, PLASMA Distortion the is the first (and only) commercial musical device that literally amplifies audio signal to 3500 Volts.
PLASMA COIL takes High Voltage distortion to new heights by adding multiple Octaver-style cirquits, and an additional Effects footswitch that can be toggled as latching or momentary.
Another difference from the original PLASMA Pedal is the removed BLEND control - with PLASMA COIL the signal is always 100% PLASMA - take it or leave it.
FEATURES:
High Voltage PLASMA Distortion circuit - converts audio signal into a series of Electrical discharges at 3.5 kV.
ON/OFF switch - silent footswitch.
2 EQ Controls - lets you boost or cut LOW and HIGH frequencies.
Master VOLUME Knob - cuts or boosts the Output Signal level.
VOLTAGE Knob - adjusts the amount of electrical current sent to the PLASMA Tube.
EFFECT Knob - allows you to select 1 of 6 different Special EFFECT types:
- Volume Boost
- 2 Subharmonic modes (Bitcrush-style Octave Down)
- 1 Upper Harmonic mode (Octafuzz-style Octave Up)
- 2 Mixed modes (Upper and Lower harmonics combined)
EFFECT Footswitch - engages the PLASMa COIL's special effect cirquit.
Effect Footswitch TOGGLE - configure EFFECTS Footswitch as a latching ON/OFF switch or as a Momentary switch.
1 MONO input Jack
PLASMA Tube:
Xenon gas filling
Power Requirements -
Standard 9V DC pedal power supply with a center negative connector, 300 mA or higher.
(PLASMA COIL does not have a Battery slot)
Power supply:
Not included
1 year Warranty
Sold Out $ 158.00
Triple Threat starts with a wide-range high gain distortion, with volume, gain, and tone controls to create a threatening rock sound. A classic phaser upgraded from the Pearl Tremor pedal by Donner is next with extended mod controls. Third in line is an analog voiced echo, originated from Donner’s first ever pedal, the Yellow Fall Delay released in 2013, with warm analog tone and rich feedback.
With upgraded circuit design and tuning the tone to Jack’s specifications, Donner combined three analog circuits into one metal enclosure, delivering unique analog sounds and versatile utility for musicians on the go. Third Man Hardware designed the external appearance of The Triple Threat, adding its signature patterns such as lightning bolts from the Tesla tower on the panel, three sharp stripes in front and the signature diagrams from Third Man Hardware’s logo on both sides of the pedal.
Main Features
3-in-1 analog effect pedal
PHASER: DEPTH, RATE, LEVEL
DISTORTION: TONE, GAIN, VOL
ECHO: TIME, FEEDBACK, LEVEL
FOOTSWITCHES toggle effects on (yellow LED indicates on)
Bypass: Buffered bypass
Power Supply: 9 volts DC (Adapter included)
$ 300.00
**This pedal is used and being sold on consignment. It is in good condition especially when considering its age. The battery connector has been replaced. The price has been adjusted accordingly.
Serial Number: 2230909
| Condition |
|
|---|---|
| Brand |
|
| Model |
|
| Categories |
|
| Year |
|
$ 175.00
**This pedal is used and being sold on consignment. It is in good condition with some noticeable signs of wear. Comes with the original packaging. The price has been adjusted accordingly.
#10 out of 10#
| Brand |
|
|---|---|
| Model |
|
| Categories |
|
| Made In |
|
Sold Out
DINGBAT MEDIUM is ideal for assembling a typical-size board with room for 6 to 10 effects. Installing Pedal Power® with the included mounting hardware is quick and easy using only a screwdriver. Dingbat Medium also features a dedicated position for a second Pedal Power that can be quickly installed with optional mounting brackets. Hook-and-loop tape is provided to attach pedals, as well as zip ties and 4-way tie mounts to secure cabling underneath.
ORGANIZE
A key element in executing a flawless performance is a clean, organized pedalboard, and Dingbat’s innovative patented design helps you set up your rig like a pro. All supplies needed for securing pedals and cabling to the board are included.
PROTECT
Dingbat MEDIUM includes a heavy-duty tour-grade soft case. Premium materials and construction ensure superior performance and long-lasting protection for your pedalboard. A removable shoulder strap and stowable backpack straps are included for easy transportation.
POWER
Dingbat Power Packages offer the convenience and added value of a factory-installed Voodoo Lab isolated power supply. Just add pedals and audio cables and you are ready to go. In addition to convenience, a factory-installed Pedal Power ensures any pedal will sound and perform its best. Even under poor AC line conditions, you can always count on Pedal Power to consistently deliver the cleanest most reliable power possible. Bundle-priced Power Package options for Dingbat MEDIUM include Pedal Power 2 PLUS, Pedal Power 3, or Pedal Power 3 PLUS.
$ 99.99 $ 140.00
Pedal Power® X4 Expander Kit adds four isolated 9V DC outputs to compatible Voodoo Lab® power supplies. Its ultra-compact size makes adding on to your existing system quick and easy, mounting to the even most space-challenged pedalboards. The innovative hybrid DC transformer design of Pedal Power X4 combines exotic components, linear regulation, and computer-optimized filtering to establish industry-leading audiophile quality power that unveils the hidden sonic potential of your rig.
Input
2.1 mm barrel jack
Center-negative polarity
12V DC only
Output
5.5 × 2.1 mm barrel connectors
Center-negative
Short-circuit protected
Special Features
Hybrid DC transformer design
Can power from any 12V DC source (400–2000 mA)
Included Cables
2 × PPBAR-RS (18”)
2 × PPBAR-RS12 (12”)
1 × PPBAR (18”)
Physical
Dimensions: 3.38” × 2.75” × 1” (86 × 70 × 25 mm)
Weight: 4 oz (114 g)
Warranty
5-year warranty in North America
For other regions, contact your country’s distributor for warranty details.
Sold Out
**This pedal is used and in excellent condition with little to no signs of wear. It comes with the original packing. The price has been adjusted accordingly.
Pedal Power X4 is a professional isolated power supply for both battery operated and high current DSP effects. Its ultra-compact size fits even the smallest pedalboards – including Voodoo Lab Dingbat TINY and Pedaltrain Nano – and operates at any mains voltage for international touring. X4's innovative hybrid DC transformer design incorporates exotic components, linear regulation, and computer optimized filtering to establish industry-leading audiophile quality power that unveils the hidden sonic potential of your rig.
As well as delivering the cleanest, most reliable power for small pedalboards, Pedal Power X4 shines as a supplementary power supply in an expanding rig. Powering directly from any 12V 400mA output or X-Link port, X4 adds four isolated outputs to an existing Pedal Power. X4 can also power from the AC courtesy outlet of a Pedal Power 2 PLUS, significantly upgrading both its isolated output capacity and high current capability.
Four isolated 9V outputs
Ultra-compact design easily mounts to the smallest pedalboards
Powers battery operated and high current DSP effects
Innovative DC transformer topology sets new standards in power supply performance
Advanced filtering and linear regulation ensure noise-free audiophile-quality power
Supplies a total of 1000mA using included AC adapter (500max per output)
X4 also powers from any 12V 400mA Pedal Power output, supplying up to 400mA of current
Includes Universal input voltage power adapter, power cables, and 3M Dual Lock for mounting
5-year warranty*
Made in the U.S.A.
$ 199.99 $ 260.00
All the tones of the original Sparkle Drive plus three custom mods for punchy and modern to thick, singing lead tones!
The Sparkle Drive MOD overdrive effects pedal from Voodoo Lab delivers all the overdriven sounds of the original Sparkle Drive but with a twist. Using the MOD switch, you can select the stock 808-based circuit or instantly pick from three custom mods. Whether you need more gain, tighter bass response, a more-vocal midrange, or a thick and juicy lead tone, Sparkle Drive MOD gives you the tools to get there.
In Stock mode, you get the classic tube-style midrange grind that's great for blues or for boosting your solos. Mod 1 is the Lead circuit with extra gain, a thick and juicy bottom end, and smooth highs that are perfect for single-note melodies. Mod 2 delivers punchy, mid-cut rhythm tones thata re great for chunky rock power chords and funk. Mod 3 gives you the high-gain treatment with articulate highs and an aggressive bottom end.
Additional features include a unique Clean control that allows you to blend in a boosted direct signal restoring attack and feel. Switching is true bypass via a high-reliability gold-contact relay.
$ 149.97
Based on an infamous circuit from a classic 1980’s high gain distortion pedal, the Ratsbane is Brian’s answer to the countless requests he has received to build his interpretation of this much-loved design.
$ 199.00
**This pedal is used and being sold on consignment. It is in good condition with some signs of wear. The price has been adjusted accordingly.
Sold Out
**This pedal is used and being sold on consignment. It is in good condition with some signs of wear. Comes with the original packaging. The price has been adjusted accordingly.
| Brand |
|
|---|---|
| Model |
|
| Finish |
|
| Categories |
|
| Year |
|
| Made In |
|
Sold Out
**This pedal is used and being sold on consignment. It is in excellent condition with little to no signs of wear. Comes with the original packaging. The price has been adjusted accordingly.
| Dimensions (W/D/H): | D 8.27” (210mm) W 3.94” (100mm) H 2.64 (67mm) |
|---|---|
| Weight: | 2.16lb. (980g) |
| Bypass: | True Bypass Switching |
| Power Consumption: | 9VDC/5mA |
| Battery Type: | 9VDC (006P) x 1 |
| AC Adapter (Optional): | 9VDC-18VDC, Negative Tips (Regulated recommended) |
| Input Impedance: | 1M ohm |
| Output Impedance: | 10k ohm |
| Nominal Input Signal Level: | -20 dBV |
| Nominal Output Signal Level: | -20 dBV |
Sold Out
**This pedal is used and being sold on consignment. It is in excellent condition with little to no signs of wear. Comes with the original packaging. The price has been adjusted accordingly.
| Brand |
|
|---|---|
| Model |
|
| Finish |
|
| Categories |
|
| Pedal Format |
|
Sold Out
**This pedal is used and being sold on consignment. It is in excellent condition with little to no signs of wear. Comes with the original packaging. The price has been adjusted accordingly.
| Brand |
|
|---|---|
| Model |
|
| Categories |
|
Sold Out $ 2,112.00
The Yamaha EAD Series (Electronic Acoustic Drums) is our unique system that brings electronic expandability and convenience to acoustic drums. By simply attaching a dedicated sensor unit containing a special microphone and a trigger, you can capture the entire setup in high-quality stereo and combine it with built-in effects and sound sources for greater expression.
The professional-grade EAD50 model takes this concept even further. It captures and processes your acoustic sound with amazing precision, merging it seamlessly with electronic sources to create a true hybrid drumming experience. With real-time control and intuitive operation, drummers can shape their own sound as they play—on stage, in the studio, during lessons, while streaming or any other playing situation. EAD50 empowers drummers of all levels to create and perform with a broad palette of sounds.
$ 39.99 $ 70.00
The Yamaha FC3A is a piano-style damper pedal for use with Yamaha keyboards that support half-damper positions. Instead of a typical on/off type pedal the half-damper feature allows you to fine tune your sustain by varying the pressure on the pedal,, giving you great control of your performance much like an acoustic piano. A robust design with a 6-foot cable and a 1/4" plug assures the FC3A will be a long lasting addition to your keyboard rig. Get more command out of your Yamaha keyboard with the FC3A keyboard pedal.
Yamaha FC3A Half-damper Pedal Features: