Products
Fender Player Plus Stratocaster Headstock Neck 22MedJum, 12" - Maple
$ 349.99 $ 420.00
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Stratocaster® guitar neck features a silky satin Modern “C” shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12” radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
- Model #: 0997312921
Product Specs
General
- Necks
- Right-Hand
- Natural
- ®
- MX
Neck
- Maple with Walnut Stripe
- Satin Urethane with Gloss Urethane Headstock Face
- Modern "C"
- 1st Fret - .820" (20.82 mm), 12th Fret - .870" (22.09 mm)
- 4-Bolt
- 12" (305 mm)
- Dot
- 22
- Single Action, Head Adjust
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.685" (42.8 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540" (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (64.77 cm)
Fender Player Plus Stratocaster Headstock Neck 22MedJum, 12" - Pau Ferro
$ 349.99 $ 420.00
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Stratocaster® guitar neck features a silky satin Modern “C” shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12” radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com
- Model #: 0997313921
Product Specs
General
- Necks
- Right-Hand
- Natural
- ®
- MX
Neck
- Maple with Walnut Stripe
- Satin Urethane with Gloss Urethane Headstock Face
- Modern "C"
- 1st Fret - .820" (20.82 mm), 12th Fret - .870" (22.09 mm)
- 4-Bolt
- 12" (305 mm)
- Pau Ferro
- Dot
- 22
- Single Action, Head Adjust
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.685" (42.8 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540" (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (64.77 cm)
Fender Player Plus Telecaster Headstock Neck 22MedJum, 12" - Maple
$ 349.99 $ 420.00
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Telecaster® guitar neck features a silky satin Modern “C” shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12” radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
- Model #: 0997332921
Product Specs
General
- Necks
- Right-Hand
- Natural
- Telecaster®
- MX
Neck
- Maple with Walnut Stripe
- Satin Urethane with Gloss Urethane Headstock Face
- Modern "C"
- 1st Fret - .820" (20.82 mm), 12th Fret - .870" (22.09 mm)
- 4-Bolt
- 12" (305 mm)
- Pau Ferro
- Dot
- 22
- Dual-Action Head Adjust
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.685" (42.8 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540" (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (64.77 cm)
Fender Player Plus Telecaster Headstock Neck 22MedJum, 12" - Pau Ferro
$ 349.99 $ 420.00
Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Plus Series Telecaster® guitar neck features a silky satin Modern “C” shape that fits your hand like a glove, with smooth rolled edges for supreme comfort. The 12” radius fingerboard and 22 medium jumbo frets facilitate fluid leads and choke free bends.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin urethane finish offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
- Model #: 0997333921
Product Specs
General
- Necks
- Right-Hand
- Natural
- Telecaster®
- MX
Neck
- Maple with Walnut Stripe
- Satin Urethane with Gloss Urethane Headstock Face
- Modern "C"
- 1st Fret - .820" (20.82 mm), 12th Fret - .870" (22.09 mm)
- 4-Bolt
- 12" (305 mm)
- Pau Ferro
- White Dot
- White
- 22
- Dual-Action Head Adjust
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.685" (42.8 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540" (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (64.77 cm)
Fender Player Series Stratocaster Reverse Headstock Neck 22MedJum, 9.5", Modern "C" - Maple
$ 299.99 $ 360.00
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
- Model #: 0994562921
Product Specs
General
- Necks
- Right-Hand
- Natural
- Stratocaster®
- MX
Neck
- Maple
- Satin Urethane Finish on Back, Gloss Urethane Finish on Front
- Modern "C"
- 1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
- 4-Bolt
- 9.5" (241 mm)
- Maple
- Black Dot
- Black
- 22
- Standard
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.650" (42 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540” (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (648 mm)
Fender Player Series Stratocaster Reverse Headstock Neck 22MedJum, 9.5", Modern "C" - Pau Ferro
$ 299.99 $ 360.00
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Stratocaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
- Model #: 0994563921
Product Specs
General
- Necks
- Right-Hand
- Natural
- Stratocaster®
- MX
Neck
- Maple
- Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
- Modern "C"
- 1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
- 4-Bolt
- 9.5" (241 mm)
- Pau Ferro
- White Dot
- White
- 22
- Standard
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.650" (42 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540” (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (648 mm)
Fender Player Series Telecaster Reverse Headstock Neck 22MedJum, 9.5", Modern "C - Pau Ferro
$ 299.99 $ 360.00
Turn it upside down with a Player Series neck with a Reverse Headstock. Crafted at our Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Telecaster® guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets and a reverse headstock.
The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with genuine "Original Contour Body" headstock decal.
This replacement neck is for a Fender® or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
- Model #: 0995263921
Product Specs
General
- Necks
- Right-Hand
- Natural
- Stratocaster®
- MX
Neck
- Maple
- Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
- Modern "C"
- 1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
- 4-Bolt
- 9.5" (241 mm)
- Pau Ferro
- White Dot
- White
- 22
- Standard
- 3/16" Hex Adjustment
- Synthetic Bone
- 1.650" (42 mm)
- Synthetic Bone
Hardware
- Dual Guide Pin
Measurements
- .540” (13.71 mm)
- .397" (10.08 mm)
- Medium Jumbo
- 25.5" (648 mm)
Fender Roasted Maple "C"/21 Narrow Tall/ 9.5" Telecaster Neck
Sold Out $ 420.00
There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice.
This genuine Fender Precision Bass neck is crafted at our Ensenada, Mexico manufacturing facility. Featuring a comfortable "Modern C"-shaped profile and 9.5"-radius maple fingerboard with 20 medium-jumbo frets, this neck was designed for pure playability. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. The perfect way to give your P Bass® authentic Fender feel, this replacement neck even sports our famous “spaghetti” logo on the headstock.
This replacement neck is for a Fender or Squier® by Fender guitar.
Because Fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. Other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. Your local FMIC Authorized Service Center can install genuine replacement necks; find Authorized Service Center locations near you in the “Support” section of fender.com.
Product Specs
General
- Color: Natural
- Country Of Origin: MX
- Instrument Type: Telecaster®
- Orientation: Right-Hand
- Series: Necks
Neck
- Fingerboard Material: Maple
- Fingerboard Radius: 9.5" (241 mm)
- Neck Finish: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
- Neck Material: Roasted Maple
- Neck Mounting: 4-Bolt
- Neck Shape: Modern "C"
- Neck Thickness: 1st Fret - .820” (20.82 mm), 12th Fret - .870” (22.09 mm)
- Number of Frets: 21
- Nut Material: Synthetic Bone
- Nut Width: 1.650" (42 mm)
- Position Inlays: Black Dot
- String Nut: Synthetic Bone
- Truss Rod: Standard
- Truss Rod Nut: 3/16" Hex Adjustment
Hardware
- Tuner Mounting Config: Dual Guide Pin
Giroux Custom Guitars Mosaic T-Style Electric Guitar Body
$ 549.99
Specifications
Body Material: Maple, Figured Walnut, Linden, White Ash, Cherry
Routing Style: Traditional T-Style, 2 Single Coils, String-Through
Weight: 6.4"
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2024 Huber Breese Music. Powered by Shopify
