Products
Peavey 6505 412 Slant Guitar Amplifier Cabinet
$ 999.99 $ 1,299.99
The 6505® 412 cabinets are outfitted with four Celestion Greenback 25 speakers and feature a closed-back cabinet made of high-density plywood construction.Features
- 4 Celestion Greenback 25 speakers
- 16 ohms
- 2 1/4 inch inputs
- 100 watts (rms) closed-back cabinet
- Stereo or Mono operation
- Recessed handles
- Heavy-duty casters
- Straight or slant versions available
- PLEASE NOTE: This item only available for in-store pickup
- 18 ply Baltic birch plywood construction
- Weight Unpacked: 90.00 lb(40.824 kg)
- Weight Packed: 102.00 lb(46.267 kg)
- Width Packed: 17"(43.18 cm)
- Height Packed: 35.75"(90.805 cm)
- Depth Packed: 32.5"(82.55 cm)
Peavey Bandit 112 Guitar Amplifier with TransTube Technology
$ 499.99 $ 599.99
Phenomenally responsive and punchy tube-like tone with a wealth of features.
Features
- 80W
- 12" Blue Marvel speaker
- 2 footswitchable channels
- Simulated speaker direct out with level
- 25%, 50%, 100% power level selector switch
- Loose, tight, and medium damping switch
- Effects loop
- 3-band EQ per channel
- Vintage/classic/warm switch on clean channel
- Classic/modern/high gain switch on lead channel
- Pre and post gain on lead channel
- High gain and low gain inputs
- Master reverb and boost
- Footswitch jack
- 45 lbs.
- 23-3/4"W x 20-1/4"H x 11-3/4"D
Peavey Classic 20 MH Mini Guitar Amplifier Head
$ 699.99 $ 899.99
Classic® 20 MH Mini Amp Head
Revered by blues, country and rock players alike, Peavey Classic amps span the tonal landscape from vintage to contemporary with ease, and the Classic 20 MH provides that tone in a highly portable package.
The all-tube, 20-Watt Classic 20 MH is powered by two EL84 power tubes and 3 12AX7/ECC83 preamp tubes. It has two channels that follow the same gain structure and voicing of the Peavey Classic series amps for pure and versatile tone. The channels share a three-band EQ, lush reverb and an effects loop. The channels, effects loop and reverb are all footswitchable.
Peavey's TSI tube monitoring alerts players of power tube status, and in the event of a necessary tube replacement, identifies which tube needs to be replaced. Rear panel features such as a Microphone Simulated Direct Interface (MSDI) with XLR output and USB out, speaker defeat switch and 3 position power attenuator switch make the Classic 20 MH mini head perfect for studio environments.
- Attenuator switch for 20 watts, 5 watts or 1 watt output power
- Two EL84 power tubes and three 12AX7/ECC83 preamp tubes
- Two footswitchable channels with 3-band EQ
- Footswitchable global volume boost, reverb, and effects loop
- Footswitch included
- T.S.I.™ (Tube Status Indication) circuit
- MSDI™ Output with XLR and ground lift switch
- USB Output
- Speaker defeat switch
- Headphone output.
- Footswitch included
- Impedance switch for 16 or 8 ohm cabinets
- Weight Unpacked: 16.75 lb(7.6 kg)
- Weight Packed: 20.50 lb(9.3 kg)
- Width Packed: 13.25"(33.655 cm)
- Height Packed: 19.375"(49.2125 cm)
- Depth Packed: 12.375"(31.4325 cm)
Peavey Classic 30 II Guitar Combo Amp
$ 849.99 $ 999.99
Classic® 30 112 Guitar Combo Amp
Revered by blues, country and rock players alike, these true all-tube amps span the tonal landscape from vintage to contemporary with ease. These amps are drenched in the tone that can only come from the combination of three 12AX7 and four EL84 tubes. Add features like 3-band EQ, footswitchable dual channels, footswitchable boost and reverb and you have one of the most versatile amplifiers on the market. The Classic 30 now ships with the all new Celestion Midnight 60 12" speaker! Classic looks, classic tone, Classic 30!
- Genuine Spring Reverb with level control
- Pre- and post-gain controls on lead channel
- External speaker capability
- Chrome-plated chassis
- Classic tweed covering
- Footswitch included
- 30 watts (rms) into 16 or 8 ohms
- 2-channel preamp
- Footswitch selectable channel switching, reverb and boost
- Four EL84s and three 12AX7s
- 12" Celestion Midnight 60 speaker
- Effects loop
- Channel and Boost switch uses Peavey part number 03022910
- Normal volume control on clean channel
- Reverb on/off switch uses Peavey part number 03051000
- Boost switch
- 3-band passive EQ (bass, middle, treble)
- Standby Switch
- Weight Unpacked: 39.50 lb(17.917 kg)
- Weight Packed: 46.00 lb(20.865 kg)
- Width Packed: 19.25"(48.895 cm)
- Height Packed: 21.5"(54.61 cm)
- Depth Packed: 13"(33.02 cm)
Peavey HP2 Electric Guitar - Deep Ocean
$ 2,499.99 $ 2,999.99
Product Description
HP® 2 Deep Ocean Electric Guitar
The Peavey® HP® 2 is constructed with leading-edge technology, traditional handcrafted methods, professional-quality upgrades, and customizations. When a guitar bears the initials of Peavey founder and CEO Hartley Peavey, players can expect an iconic design with its own unique flair.
While the esthetic is classic, the HP 2 undoubtedly stands out with its carved top and offset, asymmetrical body design that offers comfort, proper balance, and maximum playing ease. Maple was chosen for the top and basswood for the back. We selected these hardwoods not only for their natural beauty and weight characteristics, but also for their specific tonal qualities. Cream edge binding accents the body.
At the select birdseye maple neck and fingerboard, players will find unmatched stability and playability. Dual graphite reinforcement bars and an easy-access, adjustable steel torsion rod provide additional strength, as does the bolt-on construction with contoured neck heel. The oil-finished fingerboard is cut from the same piece of wood as the single-piece neck, keeping the color and grain patterns consistent. The stress-relieved lamination also adds increased stability. The HP 2 has a 25 ½" scale length, 22 jumbo frets and 15" fingerboard radius. The 10-degree tilt-back headstock has a 3+3 tuning machine configuration featuring Schaller® tuning machines with pearloid buttons. The chrome-plated hardware finish completes the look.
The HP 2's construction and electronics work in harmony. Two custom-wound Peavey humbucking pickups supply optimal output and tonal response. They're made using a two-step wax-dipping process that provides ultra-low noise operation and resistance to microphonic feedback. The pickups are mounted directly to the body, further reducing feedback at high volume levels and enhancing response. A Switchcraft® 3-way toggle switch allows selection of pickups in up, center and down configurations. Players will also find a Peavey/Floyd Rose®licensed, double-locking tremolo assembly to complete the guitar. Finishing off the guitar are two push-pull knobs for volume and tone, with the ability to split the pickups individually.
- Serial Number: 0ARCCD2000722
- Weight: 8.6lbs
SPECS
- Ten degree tilt-back headstock with unique scoop design
- Schaller® tuning machines with pearloid buttons
- Staggered ergonomic tuning machine placement with straight string pull
- Locking topnut
- 25 ½ inch scale Graphite-reinforced oil-finished neck and fingerboard
- Switchcraft® 3-way toggle switch - Up: Neck, Center: Both, Down: Bridge
- Peavey design humbucking pickups mounted directly to body
- Flame-maple/basswood body construction with carved top
- Master volume
- Master tone
- Push pull coil tap capability
- Cream edge binding
- Sculpted body/neck heel
- Easy-access torsion-rod adjustment
- Premium hardshell case included
- Peavey licensed Floyd Rose® tremolo
- Weight Unpacked:13.45lbs (6.09kg)
- Weight Packed:17.55lbs (7.96kg)
- Width Packed: 5.75"
- Height Packed:18.5"
- Depth Packed: 43.5"
Peavey Mini Mega 1000 Bass Amplifier Head
$ 649.99 $ 899.99
Delivering classic Peavey tone, the MiniMEGA features 1,000 Watts of power and produces incredibly full and rich sound in a compact package that weighs in at only 9 lbs. Using technology not found in other bass amps, the MiniMEGA represents a new level of compact bass amplifier performance. Peavey's proprietary KOSMOS® enhancement provides increased bass impact, while the exclusive psychoacoustic low-end enhancement adds bass without overburdening speakers -- a testament to Peavey's technology-driven innovation. The MiniMEGA contains additional modern features such as built-in compression and a 4-band EQ with semi-parametric mids. The back panel of the MiniMEGA has all the connectivity necessary to patch in effects or connect to a sound reinforcement system. Complete with an effects loop, gain control, crunch button, tuner output and more, the MiniMEGA delivers the high level features that today's professional bass player demands. Ideal for use in any live or studio setting, the MiniMEGA is the go-to amplifier for bassists of every style.
Features
- 1,000 Watts continuous into 4 ohms (1,500 Watts burst power)
- Gain control with crunch button
- Built-in optical compressor with defeat switch
- 4-band EQ with Punch and Bright switches
- Mid controls feature semi-parametric control with narrow Q controls
- Built-in KOSMOS® bass enhancement and psychoacoustic sub controls
- Master volume with mute control
- 1/8" headphone output
- Two twist-lock combo 1/4" outputs
- Tuner output
- Effects loop with bypass
- DI output with XLR & 1/4" outs. DI pre-post switch, ground lift and Pad controls
- MIDI footswitch input
- User-definable control surface color lighting
- Foot-switchable crunch, compressor, KOSMOS®, FX loop, and mute
- DDT™ limiter
- 9 lbs.
- Comes with carrying bag
- Weight Unpacked: 6.17 lb(2.8 kg)
- Weight Packed: 8.60 lb(3.9 kg)
- Width Packed: 14.5"(36.83 cm)
- Height Packed: 15"(38.1 cm)
- Depth Packed: 5.7"(14.478 cm)
Peavey Vintage 115 1x15 Bass Amplifier USED
Sold Out
**This amp is used and in fair condition. Signs of wear can be found around the unit. It is in working condition. The price has been adjusted accordingly.
Vintage 70's Peavey 115 Bass Cab
1x15" Speaker
Peavey VYPYR X2 Guitar Modeling Amp
$ 299.99 $ 399.99
VYPYR® X2 Guitar Modeling Amp
Peavey Electronics introduced the original VYPYR guitar amplifier in 2008. This game changing amplifier launched many industry firsts, such as first guitar amplifier to have on-board USB, stompbox presets, looper, 5 effect simultaneous operation, and TransTube®, Peavey's revolutionary analog/digital hybrid technology. In 2012 Peavey raised the bar again with the VYPYR VIP, the world's first Variable Instrument Performance amp. This was the first amplifier designed for use with electric, bass, and acoustic guitar. Additionally, Peavey was the first company to introduce instrument models to an already feature-packed amplifier.
Now continuing the tradition of innovation and excellence, Peavey launches the VYPYR X modeling amplifier. This latest evolution of the groundbreaking VYPYR series features updated styling, superior cabinet design for premier acoustic performance, and improved TransTube® technology. The new VYPYR X2 also features Bluetooth® remote control and audio streaming in. Now users can stream backing tracks into the amplifier and control all settings via iOS remote app control.
Instrument Models
Make your electric sound like an acoustic or bass guitar, or on the VYPYR X2 up to 10 different instrument models
Bluetooth® VYPYR® X Control
Control your VYPYR X2 remotely with on-board Bluetooth wireless remote control via Peavey's exclusive VYPYR control app for iOS devices. Now change and store all your favorite presets remotely. Stream audio in, play to your favorite backing tracks, or just sit back and enjoy streaming your favorite music.WYSIWYG Interface
Another Peavey original, the WYSIWYG (what you see is what you get) interface allows users to identify the position of the knobs with a glance at the amp. When a modeling amp changes presets the settings on the knobs change with it; however, on most amps the position of the knob no longer corresponds with the actual setting.This can cause confusion and mistakes that result in random, unwanted outcomes. With the VYPYR, the LEDs around the knob always indicate what position it is in relative to the current preset. Simply a better solution.
Amp Accessible Operation
Many competitors claim their amps have multiple effects and models, but most of them are not fully functional without the use of external software. With the VYPYR X you can access ANY of the features of the amp, right from the front of the amp itself or with the use of a footswitch in the case of the looper. This is a key advantage found on all VYPYR X amplifiers.
No hooking up a computer in order to edit your favorite preset or swap out an effect, you can do it right from the amplifier itself.
Packed with Amplifiers & Effects
The VYPYR is packed with amplifiers & effects so you don't need to buy them one at a time. Purchased individually the amps and effects in the VYPYR amp could cost well over $50,000. Our VYPYR series is an unbelievable value. VYPYRs use the same technology found in stompbox pedals that cost almost as much as a VYPYR for a single effect.
For the same amount of money, the Peavey VYPYR X2 gives you 26 effects in addition to 10 instrument models and 36 amplifier models.
Features:
- 40 Watts RMS
- Variable instrument input
- Lightweight and portable
- 10 instrument models
- Universal delay and reverb
- Headphone jack
- Analog TransTube® distortion
- 12" custom-voiced heavy-duty speaker
- 16 user assignable presets
- iOS app available
- 12 amp accessible stompbox effects with dual parameter control
- On-board looper with optional Sanpera™ footswitch
- Optional Sanpera™ footswitch
- Custom cabinet design for enhanced low-end response
- Semi-open back design for enhanced volume and tone
- 3.5mm aux in for connecting external audio sources
- 36 on-board amp models including 6 acoustic and 6 bass amp models
- 26 total on-board amp accessible effects
- Bluetooth wireless remote control and audio streaming in
- Weight Unpacked: 28 lb (12.7 kg)
- Weight Packed: 30.42 lb (13.8 kg)
- Width Packed: 18.3"(46.48 cm)
- Height Packed: 10.63"(27 cm)
- Depth Packed: 22"(55.88 cm)
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2024 Huber Breese Music. Powered by Shopify
