Products
Radial Engineering Power-1 Surge Supressor and Power Conditioner Rackmount
$ 109.99 $ 132.00
The Radial Engineering Power-1 is clean power conditioning unit in a rugged rackmount enclosure, providing anyone with valuable electronic gear and audio equipment with superior filtering against interference along with peace-of-mind surge protection.
| Specifications | ||
|---|---|---|
| Voltage Rating: | IEC Power: 120V, 50/60Hz USB: 5V | |
| Load Rating: | IEC Power: 15A total, 15A per outlet USB: 1A | |
| Features | ||
| General | ||
| Size (L x W x D): | 19″ x 6.38″ x 1.47″ (482.6mm x 162.0mm x 37.4mm). Cord length: 9.5' (290cm) | |
| Weight: | 3.1kg (6.5lb) - includes cord | |
| Overload Protection: | American-made Metal Oxide Varistor (MOV), 15A circuit breaker | |
| Agency Listing: | Conforms to UL Std 1419, 60950-1 and 60065 in USA, CSA Std 60950-1, C22.2 No. 62368 in Canada | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-Year, Transferable | |
Voodoo Lab Pedal Power 2 & Pedaltrain Classic JR Pedal Board USED
Sold Out
**This pedal board and power supply is used and being sold on consignment. It is in excellent condition with little to no signs of wear. The power supply comes with the original packaging. The hard case pictured is also included in the bundle. The price has been adjusted accordingly.
Pedal Power 2 PLUS Features
- 8 isolated outputs sections eliminate ground loops and hum
- Four (4) 9V/12V 100mA outputs
- Two (2) 9V/12V 250mA outputs
- Two (2) 9V 100mA outs with SAG feature to simulate low battery
- 18V/24V operation and currents up to 500mA using optional doubler cables
- All outputs compatible with 9V battery-operated pedals
- Toroidal transformer and linear regulation for lowest possible noise
- Delivers clean, consistent power even with poor AC line conditions
- 200-watt courtesy AC outlet for powering additional devices
- Includes cables and detachable AC line cord
- Hand-built in the USA
Classic JR Pedal Board
- Dimensions: 18 in x 12.5 in x 3.5 in (45.7 cm x 31.7 cm x 8.9 cm)
- Weight: 2.6 lbs (1.18 kg)
Voodoo Lab Pedal Power 3 Plus Power Supply
$ 279.99 $ 392.00
THE POWER OF GREAT TONE
Pedal Power 3 series is the first lightweight, high current, international voltage power supply to deliver zero-noise performance. Its innovative hybrid DC transformer design features a lightning-fast 80 nanosecond polarity reversal, establishing an ultra-low noise foundation. Linear regulation and computer-optimized exotic filtering components eliminate any trace of noise, setting new benchmarks in industry-leading audiophile-quality power to unveil the hidden sonic potential of any rig. From standard battery-operated stompboxes to modern high-current DSP effects, Pedal Power 3 series combines the best of time-tested analog engineering with cutting-edge technology to ensure any pedal will sound its best.
ALL ISOLATED OUTPUTS
Equipped with twelve galvanically isolated DC outputs, Pedal Power 3 PLUS eliminates ground hum and unwanted interaction between pedals. Each output supplies 9V DC with two featuring a voltage selector switch for 12V DC operation. 18V and 24V pedals can be powered by combining outputs with an optional voltage doubler cable.
POWERFUL
Each Pedal Power 3 PLUS output delivers up to 500mA of current to supply power-hungry modern DSP effects. Audiophile specifications also ensure the musical character of the most sensitive vintage stompboxes is preserved. Each output’s wide spectrum of flexibility means less guesswork when connecting your pedals.
EXPANDABLE
Never run out of outputs. Pedal Power 3 features two X-LINK expansion ports, allowing you to add up to 16 isolated outputs. Simply connect a Pedal Power X4 or X8 to X-LINK to expand your power supply as your pedalboard grows. With 2A of shared current, X-LINK expansion ports can also power other 12V high-current devices like the Neural Quad Cortex® using a standard DC power cable*. No pricey adapters or complex setups taking up valuable isolated outputs are needed.
GOES ANYWHERE
The low-profile, ultra-lightweight design of Pedal Power 3 PLUS easily mounts to any pedalboard, adding an almost undetectable amount of weight. Operating at any input voltage 100V-240VAC, Pedal Power 3 PLUS makes international touring convenient and hassle-free. No voltage converters are needed. Just hit the road, plug in, and rock out.
*IMPORTANT NOTE: Due to the high current draw of the Quad Cortex® (1.8A), the second X-LINK port should remain unused when powering this device.
Pedal Power 3 PLUS Features:
- 12 isolated 500mA DC outputs • 10 x 9V, 2 x Switchable 9V/12V
- X-LINK expansion ports connect Pedal Power X4 and X8 units to add up to 16 isolated outputs
- Powers standard battery operated and high current DSP effects
- 100V-240VAC operation for international touring
- Audiophile-quality power ensures pedals sound and perform their best
- Zero noise hybrid DC transformer design with linear regulation
- Delivers clean, consistent power even with poor AC line conditions
- Ultra-lightweight, low-profile aluminum construction
- Includes DC power cable kit and detachable AC line cable
- Dimensions: 7” x 3.4” x 1.5” (178 x 86 x 38 mm)
- Weight: 1.0 lbs. (450g)
- Hand built in the U.S.A.
Pedal Power 3 PLUS Specifications:
- Inputs: IEC Connector. 100-240VAC Operation
- Outputs: 5.5 x 2.1mm barrel connectors – center negative, Short circuit protected
- Special Features: X-LINK expansion ports (2) for use with Pedal Power X4, X8, or other 12V devices drawing 2A or less.
- Included Cables: Standard polarity DC cable 12-pack (part# PPPK-12)
- Physical Dimensions: 7” x 3.5” x 1.5” (152 x 89 x 38 mm)
- Weight: 0.9 lbs. (450g)
- Warranty: 5-year warranty in North America. Other regions contact your country's distributor for warranty details.
Voodoo Lab Pedal Power X4 Expander Kit
$ 99.99 $ 140.00
Pedal Power® X4 Expander Kit adds four isolated 9V DC outputs to compatible Voodoo Lab® power supplies. Its ultra-compact size makes adding on to your existing system quick and easy, mounting to the even most space-challenged pedalboards. The innovative hybrid DC transformer design of Pedal Power X4 combines exotic components, linear regulation, and computer-optimized filtering to establish industry-leading audiophile quality power that unveils the hidden sonic potential of your rig.
Pedal Power X4 Expander Kit Features
- Adds 4 isolated 9V DC outputs to compatible Pedal Power
- Powers directly from Pedal Power 3 X-LINK or any 12V out of 400mA or more
- Each output delivers up to 500mA
- Ultra-compact, lightweight design for easy mounting to any pedalboard
- Advanced filtering and linear regulation ensure noise-free audiophile-quality performance
- Delivers clean, consistent power even with poor AC line conditions
- Works with battery-operated and high current DSP effects
- Compatible with Pedal Power 3, ISO-5, Digital, 4X4, and MONDO
- Includes power cables and 3M™ Dual Lock™ for mounting
- Made in the U.S.A.
Specs
-
Input
-
2.1 mm barrel jack
-
Center-negative polarity
-
12V DC only
-
-
Output
-
5.5 × 2.1 mm barrel connectors
-
Center-negative
-
Short-circuit protected
-
-
Special Features
-
Hybrid DC transformer design
-
Can power from any 12V DC source (400–2000 mA)
-
-
Included Cables
-
2 × PPBAR-RS (18”)
-
2 × PPBAR-RS12 (12”)
-
1 × PPBAR (18”)
-
-
Physical
-
Dimensions: 3.38” × 2.75” × 1” (86 × 70 × 25 mm)
-
Weight: 4 oz (114 g)
-
-
Warranty
-
5-year warranty in North America
-
For other regions, contact your country’s distributor for warranty details.
-
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2026 Huber Breese Music. Powered by Shopify
