Products
Eminence Squareback 12" Speaker USED
$ 75.00
Eminence Squareback 12" Speaker USED
Vintage Eminence Squareback 12" Speaker (8 ohm) from the late 1970's early 80's. These speakers were frequently found in Peavey, Acoustic and Ampeg amps and PA cabinets in the late 70's and early 80's.
EVH 5150III 2X12 Cabinet - Black
$ 599.99 $ 810.78
Delivering pure EVH sound and power, the EVH 5150III® 2x12 straight-front speaker enclosure is the perfect companion to our 50-watt 6L6 head or 15-watt lunchbox heads.
Available in a thick textured Black or Ivory covering with a silver EVH logo badge, the 2x12 cab features premium 7-ply 5/8” birch pine construction and is loaded with a pair of renowned-sounding 12” Celestion® EVH G12H EVH 30W Annivesary Series speakers.
This cab also includes a molded plastic strap handle with black powder coated caps, head-mounting mechanism and tilt-back legs.
A high-quality fitted cover is available as an EVH accessory.
- Model #: 2253101010
Product Specs
General
- EVH® 5150III® Cabinets
- Black
- Speaker Enclosure
- MX
Electronics
- 60 Watts at 16 Ohms
Hardware
- Black Textured Vinyl
- 7-Ply 5/8" Birch Pine
- Black
- Molded Plastic Strap with Black Powder Coated Caps
- Included
- One - 1/4"
Speakers
- Two - 12" Celestion® EVH® G12H 30W Anniversary Series
- 60 Watts
- 16 ohms
Measurements
- 14" (35.6 cm)
- 16.5" (41.91 cm)
- 30" (76.2 cm)
Fender Tone Master FR-12 1x12" 1000W Powered Speaker - Black
$ 599.99 $ 770.00
The Tone Master FR-12 is a full range, flat response powered speaker designed for use with today's digital guitar amp modelers and profilers. Tone Master FR-12 delivers clear and accurate sound reproduction and perfectly replicates every detail of the amp and effect models. They're the ultimate companion to Tone Master Pro and the ideal solution for players who use modelers at home or on stage.
The Tone Master FR-12 features an integrated 1,000-watt power amp that delivers the volume and headroom needed for even the most demanding live performance. The 3-band active EQ and high frequency cut control allow players to fine tune their stage tone without altering the line output signal. Plus, the design of the FR series was inspired by classic Fender amplifiers for an authentic backline look and feel.
FEATURES
- 1,000 Watt Class-D Power Amp
- 12" Special Design Speaker
- 1" Wide Dispersion High Frequency Driver
- 3-Band Active EQ with High Frequency Cut Control
- Integrated Tilt Back Legs
- Lightweight Plywood Enclosure
- Authentic Fender Amplifier Industrial Design
Specifications
General
Electronics
Hardware
Speakers
Fender Vintage Special Design Speaker USED
$ 99.99
Fender Vintage Special Design 12" Speaker
JBL 305P MkII Powered 5" Two-Way Studio Monitor
$ 149.00 $ 217.08
Patented Image Control Waveguide
For detailed imaging and a broad, room-friendly sweet spot
Next-generation JBL transducers
For optimized transient response and improved linearity
New Boundary EQ settings
Compensate for low frequency variants introduced by the environment
Powered 5" (12.7 cm) Two-Way Studio Monitor
- LF Driver Size: 127 mm (5")
- HF Driver Size: 25 mm (1")
- HF Driver Type: Soft dome
- Crossover: 1725Hz 4th order acoustic Linkwitz-Riley
- Power Configuration: Bi-amplified
- HF Driver Power Amp: 41 W Class D
- LF Driver Power Amp: 41 W Class D
- Frequency Response: 49Hz – 20kHz (±3dB)
- Frequency Range: 43Hz – 20kHz (-10dB)
- Low Frequency Extension: 43Hz (-10dB)
- Maximum Continuous SPL: 94dB
- Maximum Peak SPL: 108dB
- Maximum Peak Input Level: +6dBV / +20.3dBu (-10dBV / +4dBu)
- System Distortion Criteria: <10% THD at maximum output with full compressor / limiter engagement
- Electrical Distortion Criteria: 0.2% THD @ 1kHz / 2.83VRMS output; <1% THD @ 1kHz, full rated output
- Signal to Noise Ratio: 75dBA (A-Weighted), 70dBr (unweighted), relative to 2.83VRMS output
- Coverage Pattern: 120° x 90° (horizontal x vertical)
- HF Trim Control: -2dB, 0dB, +2dB
- Boundary EQ: LF Shelf @ 50Hz
- AC Input Voltage: 100 – 240VAC (±10%), 50 / 60Hz
- Enclosure Type: Ported
- Enclosure Construction: 15mm MDF
- Enclosure Finish: Matte black PVC
- Baffle Construction: Injection-molded structural ABS
- 1 x 305P MkII studio monitor
- 1 x Power cord
- 1 x Quick setup guide
- 4 x Peel-off rubber pads
Mackie DLM 12 Powered Loudspeaker
$ 999.99 $ 1,059.00
Power, mixing and speakers all-in-one.
Mackie's DLM Series powered speakers represent the combination of power, fidelity and portability that have placed Mackie among the most respected brands in professional audio. The Mackie DLM12 is a 12" powered loudspeaker whose features list is one thing, but whose spectacular sound quality is truly its greatest feature of all. The DLM series speakers additionally feature a fully capable digital mixer that is integrated right into the speaker box.
One of the most significant technological innovations of the DLM line is Mackie TruSource Technology. It's a potent combination of a brand new, completely unique, transducer design and powerful proprietary digital signal processing. At the heart of the DLM12 is the extremely compact TruSource driver, which combines the high and low-frequency driver into a vertically-aligned, common-magnet design that is ultra-efficient and extremely capable. The sonic reproduction is incredibly transparent across the entire frequency range.
Drawing on the powerful mixing capabilities of the popular Mackie DL1608, DLM Series loudspeakers feature a powerful integrated digital mixer with all the effects, processing and tools you need for your professional applications. That makes the DLM speakers truly a one-box solution for many applications.
These speakers are ideal for bands, DJs and venues, as their versatility is the only thing that rivals their fidelity. They can be pole-mounted, wall-mounted, flown, stacked, and carried. They are lightweight, rugged and sound fantastic.
FEATURES
2000W power via Class-D amplification
12â³ LF woofer / 1.75â³ HF compression driver
Incredibly compact, lightweight design
Powerful TruSource DSP delivers seamless clarity, consistent coverage and unmatched fidelity
DL2 Integrated Digital Mixer
Powerful, one-touch digital mixer with bright OLED screen
Two highly versatile input channels with FX
Independent channel level, 3-band EQ and effects control
16 great-sounding channel effects include reverb, chorus and delay
XLR/TRS combo and dual RCA connectors
Handles mic, line, stereo and instrument signals
Unmatched system control for professional applications
Multi-band feedback destroyer
Six speaker modes deliver the perfect voicing for your application
Alignment delay up to 300ms for delay stack, balcony, etc.
Three memory locations for instant venue setting recall
Smart Protect DSP dynamically protects amp/driver
Innovative ultra-compact design
1/3 smaller than a traditional 2-way
Fit an entire DLM system in nearly any car
Stack them up for storage
Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
Flyable via standard M10 rigging hardware
Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
Roadworthy PC-ABS cabinet with pro black finish and ergonomic top carry handle
Rugged, powder-coated 20 gauge steel grille
Integrated kickstand delivers perfect angle for personal monitor use
Ridiculously lightweight (31 lbs. / 14.1 kg)
Mackie Thump Go 8" Portable Battery Powered Loud Speaker
$ 449.99 $ 679.30
Set the stage, wherever you want it to be. Bring professional live sound reinforcement to small concerts, corporate events, assemblies, weddings, parties and more. Mackie Thump GO puts powerful sound processing and wireless control in your hands, whether you’re holding a guitar, wired or wireless microphone or DJ controller.
- Ultra-efficient 200W Class-D amplifier
- 8” custom high-output woofer and 1” compression driver for clean, punchy sound
- Removable lithium-ion battery with up to 12 hours of battery life
- Bluetooth® connectivity for music streaming or linking a second Thump GO
- Wireless control via the Thump Connect 2 app
- 2-channel digital mixer with dual XLR / TRS combo inputs and XLR mix output
- Feedback eliminator to prevent unwanted squeals and rumble
- 4 application-specific speaker modes—Music, Speech, Monitor and Sub
- Indoor or outdoor voicing modes
- Music Ducking Mode automatically lowers channel 2 when channel 1 receives signal
- Sturdy, lightweight speaker enclosure to withstand heavy use
- Rugged, powder-coated steel grille
Yamaha DBR12 2-Way Powered Speaker - Black
$ 449.99 $ 597.00
The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications.
Yamaha DBR15 Powered Speaker
$ 549.99 $ 806.00
Yamaha's powered speaker offerings now include the DBR Series, The most portable powered loudspeakers Yamaha has to offer, the versatile DBR Series harnesses the same state-of-the-art Yamaha DSP and amplifier and speaker technologies developed for the professional DSR Series and DXR Series lineups, ensuring high-resolution sound at any output level. The DBR 15 features a 15" LF driver and a 1.4" ferrite HF driver with a 1" throat. It packs a powerful 1000W Class D amplifier and does it all while weighing in at 42lbs. The cabinet is ergonomically designed for easy transport and the sound is pure Yamaha.
High-Efficiency 1000W Class-D Amplifiers
The DBR's lightweight, high performance Class-D amplifier produces 1000W of power, achieving an SPL of 132dB, delivered with remarkable clarity and dynamic characteristics.
Custom Designed Transducer
The high power output woofers deliver well-defined, powerful bass with minimal distortion, while the 1.4" precision compression driver produces accurate mid-range and high frequencies.
A Rugged, Highly Portable Cabinet
DBR Series speakers feature a compact, lightweight, and durable plastic cabinet which offers the highest level of portability of all Yamaha powered speakers. The sleek steel grille bolsters cabinet durability and protects the internal components while a newly designed ergonomic handles provide effortless transportation and system setup.
Easy-to-use Onboard 2-Channel Mixer
DBR Series speakers have two input channels. CH1 has a combo jack which accepts both XLR and TRS Phone allowing for either Mic or Line level input signals. CH2 offers two input options; a combo jack that accepts XLR or TRS Phone, and an RCA pin jack for input from CD players or other stereo line-level sources. The onboard mixer allows you to select either CH1+2 MIX to mix the signal of CH1 and CH2, or CH1 THRU to pass the signal from CH1 only.
Smart Enclosure Design for Floor Monitoring
DBR Series speakers feature an optimized 50wedge angle for floor monitoring. In addition the DBR12 and DBR15's symmetrical shape allows for effortless configuration of a mirror-mode floor monitoring system in either symmetrical or stereo sound field setups.
Rigging Points for Installation Applications
DBR loudspeakers come equipped with M8 rigging threads, allowing for rigged applications with optional speaker brackets or standardized eye-bolts.
- 1000 watts class D power
- Lightweight enclosure
- Broad coverage
Yamaha HS7 Powered Studio Monitor
$ 349.99 $ 466.00
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter.
- 2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter
- 43Hz - 30kHz frequency response
- 60W LF plus 35W HF bi-amp system for high-performance 95W power amplification
- ROOM CONTROL and HIGH TRIM response controls
- XLR and TRS phone jack inputs accept balanced or unbalanced signals
Yamaha MSP3A Powered Monitor Speaker - Black
$ 219.99 $ 273.00
Featuring a 22-watt built-in amplifier and Twisted Flare Port for clearer bass, the MSP3A reference monitor produces sound that is faithful to the original. With a variety of inputs, controls and optional support brackets, the MSP3A is ideal for small studios, post-production, monitoring electronic instruments and surround reproduction.
- Authentic sound in a compact body
- Clear bass from unique Twisted Flare Port technology
- Versatile inputs and controls
- Mounting points for ceiling and wall mounting brackets and mic stand adaptor options
| MSP3A | ||
|---|---|---|
| Speaker type | 2-way powered speaker, Bass-reflex type (Twisted Flare Port) | |
| Frequency response (-10dB) | 67Hz - 22kHz | |
| Components | LF | 4" (10 cm) Cone |
| HF | 0.8" (2.2 cm) Dome | |
| Crossover | 4kHz | |
| Output power | 22W | |
| Maximum Output Level (Measured peak, IEC noise@1m) | 99dB SPL | |
| Input sensitivity | LINE 1 : -10 dBu, 10kΩ (RCA), LINE 2 : +4.0 dBu, 10kΩ (Combo) | |
| I/O connectors | LINE 1 : RCA, LINE 2 : Combo (XLR/TRS phone) | |
| Indicators | Power ON (Green LED) | |
| Power requirements | May vary depending on region : 120V 50/60Hz, 110 – 120V 50/60Hz, 230V 50/60Hz, 220 – 230V 50/60Hz, 220V 50Hz, 240V 50Hz | |
| Power consumption | 30W | |
| Others | Level control (LINE1, LINE2); Tone control (LOW: -3.0dB - +3.0dB @100Hz, HIGH: -3.0dB - +3.0dB @10kHz) | |
| Dimensions | W | 144mm (5-5/8") |
| H | 236mm (9-1/4") | |
| D | 166mm (6-5/8") | |
| Net weight | 3.6kg (7.9 lbs.) | |
| Accessories | Power cord, Owner's manual | |
| Packaging | Single | |
| Flying and mounting hardware | 2 x M5, Depth 15 mm (9/16") | |
| Options | Mic stand adaptor BMS-10A, Free-angle clamp BAS-10, Wall mounting bracket BWS20-120 / BWS20-190, Ceiling bracket BCS20-150 / BCS20-210 | |
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2025 Huber Breese Music. Powered by Shopify
