Products
Yamaha HS8S 8" Powered Studio Subwoofer (Each)
$ 499.99 $ 775.00
High-performance Speakers and Mounting System
The elegant white-cone speakers used in the HS-series monitors deliver superlative audio performance that is further enhanced by a carefully engineered mounting system. A system of screws and a specially designed mounting ring eliminates spurious vibration and resonance, allowing the speaker to deliver its full sonic potential. Another feature that boosts woofer performance is a magnet selected to produce accurate, solid low-end response. The tweeter frames employ an advanced smooth-contour design that minimizes losses so that high-frequency details come through with remarkable accuracy. The extra thickness of the tweeter frame also minimizes resonance that can interfere with high-end clarity. The overall result is extraordinarily smooth, accurate response throughout the audio spectrum.
The Benefits of Built-in Power and Bi-amplification
Powered, bi-amplified monitor speakers simply make the most electrical and sonic sense, and that's why they have become the first choice of sound professionals the world over for near- and mid-field monitoring applications. In addition to the obvious advantage that you don't need separate power amplifiers, the fact that power and speakers are integrated in one unit means that the amplifiers can be perfectly matched to the characteristics of the speaker units used so you get consistently superior performance with any source in just about any listening environment. Bi-amplification means that separate power amplifiers are used to drive the low-mid and high-frequency speaker units, and this eliminates interaction between the units as well as the response and phase anomalies introduced by passive crossover networks. Both speaker units can function at optimum performance levels for correspondingly high overall sonic quality.
Large Magnets in an Advanced Magnetic Circuit Design
One feature of the HS-series monitors that you'll hear but are not likely to see is the extra large magnets. In combination with an advanced magnetic circuit design these magnets provide a powerful, uniform, tightly controlled flux field that results in exceptionally smooth response and dynamic capability over a wider frequency range.
Portable, Versatile Monitoring for Your Audio Workstation
All you really need for top-class stereo production capability is a good audio workstation and a pair of HS-series monitors. A system like this is not only portable and extremely easy to set up anywhere you need it, it can deliver outstanding monitoring performance that will let you get your mixes just right. The response-control features of these monitors let you tweak them for the best response no matter where you set them up.
Serious Surround Production
Although stereo is still the most common format for basic music listening, 5.1 surround has become the audio format of choice for today's advanced visual media, and is beginning to be recognized as a superior vehicle for pure musical enjoyment as well. But to properly mix and produce surround sound you need a good 5.1 monitoring system. The HS-series speakers and subwoofer are the perfect choice if you want competitive surround-monitoring performance without having to spend big-studio megabucks to get it.
Optimum Response In Any Room
Speaker response can vary greatly depending on the size, shape, and surface acoustics of the room in which they're used, as well as how they're placed within that environment. The HS-Series gives you extra room-matching and speaker placement versatility with ROOM CONTROL, MID EQ, and HIGH TRIM response control switches that are specifically designed to compensate for common acoustic deficiencies and monitoring needs. The ROOM CONTROL switch, for example, can be used to compensate for the unnatural low-end exaggeration that usually occurs when speakers are placed close to walls or in corners. The MID EQ switch gives you subtle midrange boost and cut options in addition to flat response, while the HIGH TRIM switch offer the same type of response-tailoring capability for the high frequencies.
Features
- 8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz
- 22Hz–150Hz frequency response
- High-power 150W amplifier exclusively designed for low frequencies
- LOW CUT switch, LOW CUT control (80–120Hz) HIGH CUT control (80–120Hz)
- PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
- XLR and TRS phone for outputs and XLR for L and R and EXT SUB
HS8S 8" Powered Studio Subwoofer (Each) Specifications:
- W 300 mm (11.8")
- H 350 mm (13.8")
- D 389 mm (15.3")
- Net weight: 12.5kg (27.6 lbs.)
- Others: LEVEL control, PHASE switch : NORM./REV., HIGH CUT control (80–120Hz, center click), LOW CUT control (80–120Hz, center click), LOW CUT switch (ON/OFF)
Yamaha MG10XU 10-Channel Mixer
Sold Out $ 399.00
Now in its third incarnation, the MG Series embodies the pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction. The MG10XU is the ten-channel version of the series, with four mono XLR and 1/4" hybrid inputs along with three stereo line inputs.
The MG10XU boasts an intuitive interface with capacities suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability that has made it a leader in its class.
MG10XU 10-Channel Mixer with Effects
- Phantom power: +48 V
- Digital I/O: USB Audio Class 2.0 compliant, Max 192 kHz, 24-bit
- Input Channels: 4 Mono[MIC/LINE], stereo[LINE]: 3
- Output Channels: STEREO OUT: 2
- MONITOR OUT: 1
- PHONES: 1
- AUX SEND: 1
- Bus: Stereo: 1, AUX[FX]: 1
- Input Channel Function
- PAD: 26 dB (Mono)
- HPF: 80 Hz, 12 dB/oct (Mono)
- COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec
- EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
- EQ MID: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
- EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
- PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping
- Level Meter: 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]
Yamaha MG12XU Mixing Console
$ 429.99 $ 507.00
Now in its third incarnation, the MG Series embodies the pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction. The MG12XU is the 12-channel version of the series, with six mono XLR and 1/4 in. hybrid inputs along with three stereo line inputs.
The MG12XU boasts an intuitive interface with capacities suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability that has made it a leader in its class.
Features
- Outstanding microphone preamps
- Switchable Phantom Power & PAD Switch
- 1-knob Compressors
- EQ and High-pass Filters
- AUX / Effect Sends / Group
- LED level metering
- Built-in SPX Digital Effects
- Metal Chassis
- USB
-
12-Channel Mixing Console: Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo) / 2 GROUP Buses + 1 Stereo Bus / 2 AUX (incl. FX)
- 12-Channel Mixing Console
- Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo)
- 2 GROUP Buses + 1 Stereo Bus
- 2 AUX (incl. FX)
- “D-PRE” mic preamps with an inverted Darlington circuit
- 1-Knob compressors
- High-grade effects: SPX with 24 programs
- 24-bit / 192kHz 2in / 2out USB Audio functions
- Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter
- Includes Cubase Al DAW software download version
- PAD switch on mono inputs
- +48V phantom power
- XLR balanced outputs
- Internal universal power supply for world-wide use
- Optional Rack Mount Kit RK-MG12 Available
- Metal chassis
- Dimensions(W×H×D): 308 mm x 118 mm x 422 mm (12.1" x 4.6" x 16.6")
- Net Weight: 4.2 kg (9.3 lbs.)
Yamaha MG16XU 16-Channel Mixer
$ 659.99 $ 685.99
Now in its third incarnation, the MG Series embodies the pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction. The MG16XU is the 16-channel version of the series, with eight mono XLR and 1/4" hybrid inputs along with two mono/stereo [MIC/LINE] inputs and two stereo line inputs.
The MG16XU boasts an intuitive interface with capacities suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability that has made it a leader in its class.
FEATURES
- Outstanding microphone preamps
- Switchable Phantom Power & PAD Switch
- 1-knob Compressors
- EQ and High-pass Filters
- AUX / Effect Sends / Group
- LED level metering
- Built-in SPX Digital Effects
- Metal Chassis
- USB
- Studio quiet and bar-room loud. Order today.
SPECIFICATIONS
- MG16XU 16-Channel Mixer
- On-board processors : SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
- Phantom power: +48 V
- Digital I/O: USB Audio Class 2.0 compliant, Max 192 kHz, 24-bit
- Input Channels: 8 Mono[MIC/LINE], 2 Mono/Stereo[MIC/LINE], stereo[LINE]: 2
- Output Channels: STEREO OUT: 2
- MONITOR OUT: 1
- PHONES: 1
- AUX SEND: 4
- GROUP OUT: 4
- Bus: Stereo: 1, GROUP, AUX: 4
- Input Channel Function
- PAD: 26 dB (Mono)
- HPF: 80 Hz, 12 dB/oct (Mono)
- COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec
- EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
- EQ MID: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
- EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
- PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping
- Level Meter: 2 x 12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15,
- -20, -25, -30 dB]
Yamaha MGX12 18-Channel Digital Mixing Console
$ 799.99 $ 1,150.50
The Digital Evolution of an Analog Classic
Building on the legacy of Yamaha's MG Series—already established as a global standard in mixing consoles—MGX digital mixing consoles deliver a perfect blend of flexibility, performance, and premium sound quality, excelling in a versatile range of live and installed sound, podcast/live streaming, music production, and recording applications.
The powerful and extremely versatile features of the MGX12 are designed to be operated quickly and intuitively through its touch-panel GUI and various physical controllers. In addition, a comprehensive selection of I/O options allows you to freely configure the system to suit any application. From live sound and installed sound systems—whether in halls, cafés, clubs, or houses of worship—to podcast streaming and professional recording, the MGX12 adapts seamlessly to a wide range of environments. And in every case, operators, artists, and audiences alike will be captivated by the quality of its sound and performance.
Specs
GENERAL FEATURES
-
11 + 1 fader configuration (non-motorized faders).
-
4.3-inch touchscreen with five control knobs.
-
Built-in DSP processor with professional signal processing and latency-free monitoring.
-
Assistive features: Auto Gain, Clip Safe, Simple/Standard modes, Scene Recall.
-
microSD card recording/playback support.
MIXING CAPACITY
-
Input channels: 4 mono + 4 stereo + 1 Sound Pad + 2 FX return channels.
-
Mix Buses: 8 (mono).
-
Stereo Bus: 1.
-
FX Buses: 2.
-
Cue Bus: 1.
INPUT / OUTPUT CONNECTIVITY
Analog Inputs
-
4 × Combo XLR / 1/4" TRS (Mic/Line) inputs.
-
4 × 1/4" TRS line inputs.
-
4 × RCA line inputs.
Analog Outputs
-
2 × XLR main outputs.
-
6 × TRS line outputs.
Headphone Outputs
-
4 × TRS headphone outputs (100 mW + 100 mW @ 40 Ω).
Digital / Other
-
USB TO HOST: 2 × USB-C ports (MAIN: 32-bit, SUB: 16-bit).
-
microSD card slot (16-track recording and 2-track playback).
-
Bluetooth audio input: Bluetooth 5.0 (A2DP).
-
DC power input (barrel type).
RECORDING / PLAYBACK
-
USB MAIN: 18 inputs / 18 outputs at 32-bit / 96 kHz.
-
USB SUB: 2 inputs / 2 outputs at 16-bit / 48 kHz.
-
microSD card: up to 16-track recording and 2-track playback (24-bit / up to 96 kHz).
USER INTERFACE / CONTROLS
-
Touchscreen: 4.3" main display.
-
Number of faders: 12 (non-motorized).
-
SEND knobs: 12.
-
Rotary encoders: 5.
SIGNAL PROCESSING & PERFORMANCE
-
Frequency response: +0.0 / -0.5 dB from 20 Hz to 20 kHz (reference at 1 kHz).
-
Dynamic range: 125 dB (typ., DAC to stereo out), 115 dB (typ., INPUT to MAIN out).
-
Total harmonic distortion: <0.002 % (20 Hz–20 kHz @ +4 dBu, MIC input to stereo out).
-
Signal delay: <0.4 ms (INPUT to stereo out @ 96 kHz).
-
Gain range: 86 dB.
-
Crosstalk: -120 dB (adjacent channels).
-
Residual output noise: -108 dBu (ST main off).
-
Equivalent input noise: -128 dBu (input gain max).
POWER & PHYSICAL
-
Power requirements: DC16 V / 2.4 A with PA-300C AC power adapter (100 V–240 V, 50/60 Hz).
-
Power consumption: 38.4 W.
-
Dimensions (W × H × D): 335 mm × 96 mm × 319 mm (13.2" × 3.8" × 12.6").
-
Net weight: 3.9 kg (8.6 lb).
-
Operating temperature: 0 – 40 °C.
-
Storage temperature: -20 – 60 °C.
INCLUDED ACCESSORIES
-
Start Guide.
-
Safety Guide.
-
Steinberg Software License cards ×2 (Cubase AI + WaveLab Cast, Steinberg Plus).
-
Basic FX Suite license card.
-
AC Power Adapter (PA-300C) with power cord
Yamaha STAGEPAS 100BTR Portable PA System
$ 399.99 $ 500.00
EXPAND YOUR RANGE. EXTEND YOUR REACH.
The STAGEPAS 100BTR portable PA system strikes a perfect balance between high-quality sound and ultimate portability, allowing you to turn virtually any location into your own intimate live stage. Available in two versions, one with a battery and one without, the lightweight, durable design, effortless operation, and astonishing sound of the STAGEPAS 100BTR will help you reach your audience like never before.
Portable PA system equipped with a 100 W power amp, coaxial compression driver with 1.4” voice coil HF and 6.5” cone LF, a 3-channel mixer, and internal lithium-ion battery
- 100 W Class-D amplifier
- 1.4” HF + 6.5” LF high-quality coaxial compression driver using a FIR filter for the crossover
- 3-channel mixer (2 monaural mic/line + 1 line)
- Equipped with a 2-band master EQ
- Compatible with Hi-Z input (Channel 2 only)
- Equipped with mix-out
- Carrying handle doubles as an adjustable stand
- Compatible with audio accompaniment over Bluetooth
- Optional carrying bag (BAG-STP100) available for convenient transport
- Internal lithium-ion battery
Type
| 2-way Bi-amp Powered Speaker with mixer |
I/O
| Inputs | INPUT 1: Combo (mic/line), INPUT 2: Combo (mic/line), INPUT 3: Stereo Mini x1 (line) |
| Outputs | OUTPUT: XLR3-32 (INPUT 1-3 mix) |
| Bluetooth | Ver.5.0, A2DP (SBC, AAC), Class 1 |
Mixing capability
| Mixing channels | 3 |
| Input channel functions | Hi-Z: CH2 |
| Output channel functions | 2 Band EQ |
Speaker type
| Coaxial speaker with compression driver |
Frequency range (-10dB)
| 70 Hz – 20 kHz |
Coverage area
| H90ﾟ x V90ﾟ |
Crossover
| 1.8 kHz (FIR-X) |
Maximum output level (1m; on axis)
| 120 dB SPL *1 |
Components
| LF | 6.5" Cone, 1.7" voice coil |
| HF | 1" throat compression driver, 1.4" voice coil |
Amplifier class
| Class-D |
Power rating
| Dynamic | 100 W (LF: 93 W, HF: 7 W) |
Cooling
| Natural convection (no fan) |
Power consumption
| 10 W (Idle), 30 W (1/8 power) |
Power requirements
| 100-240 V 50/60 Hz |
Battery
| Type | Rechargeable Lithium ion battery pack |
| Capacity | 60 Wh |
| Operating Time | Maximum 6 hours, 1/16 power continuous 5 hours |
| Charging Time | Approx. 2.5 hours |
Cabinet material
| Plastic (PP) |
Handle
| Bottom x1 (Rotatable) |
Flying and mounting hardware
| 1 × 3/8", depth 12 mm (center of handle) |
Dimensions (W x H x D)
| 239 x 310 x 215 mm (9.5" x 12.3" x 8.5"), with handle |
Weight
| 5.5 kg (12.1 lbs), without AC adaptor |
Accessories
| Power cord x 1, AC adaptor (PA-500) x 1 |
Options
| Carrying bag: BAG-STP100 |
Yamaha URX22C Audio Interface
$ 219.99
You. For Real.
Despite its minimalist footprint, the URX22C packs serious creative power. With professional-grade sound, flexible DSP processing, and a full suite of Steinberg production tools, it gives you everything you need to record, produce, or stream from virtually anywhere - with impressive quality and ease.
Specs
-
Inputs
-
2 Mic/Line combo inputs
-
Hi-Z switch on input 2 for electric guitar
-
2 TRS inputs
-
-
Outputs
-
1 TRS headphone output (15 mW + 15 mW @ 40 Ω)
-
1 IN / 1 OUT (MIDI)
-
Main output (TRS)
-
-
Digital / USB
-
1 × USB Type-C (32-bit)
-
2 power options:
-
Type-C USB bus power
-
Type-A micro-USB DC input
-
-
-
Software & Control
-
Dedicated software: dspMixFx
-
Input gain control
-
Mono/Stereo switch
-
Hi-Z for Input 2
-
+48 V phantom power
-
Mix balance
-
Main volume control
-
Headphone volume control
-
-
Recording & Playback
-
2-track recording
-
2-track playback
-
-
Audio Performance
-
Sample rate: 44.1 kHz – 192 kHz
-
Frequency response: +0.0 / −0.4 dB (20 Hz – 22 kHz)
-
Total harmonic distortion:
-
Mic/Line/Hi-Z: 0.003% @ 1 kHz, 22 Hz–22 kHz BPF
-
Main output: 0.002% @ 1 kHz, 22 Hz–22 kHz BPF
-
-
Dynamic range:
-
Mic/Line/Hi-Z: 102 dB
-
Main output: 105 dB
-
-
Gain: 54 dB
-
-
Power
-
DC 5 V / 0.9 A
-
Power consumption: 4.5 W
-
-
Dimensions & Weight
-
Width: 159 mm (6.3")
-
Height: 47 mm (1.9")
-
Depth: 159 mm (6.3")
-
Weight: 1.0 kg (2.0 lb)
-
-
Included Accessories
-
Setup Guide
-
Cubase AI License Card
-
Basic FX Suite License Card
-
Steinberg Plus License Card
-
USB Cable (USB 3.1 Gen 1, Type-C to Type-A, 1.0 m)
-
-
Operating Conditions
-
Temperature range: 0 °C to +40 °C
-
-
Loopback & Mixing
-
Loopback channels:
-
2 Mono + 3 Stereo + 1 FX
-
-
Mix buses:
-
2 (1 Mix + 1 Streaming Mix)
-
-
-
DSP Effects
-
PitchFix (Voice Changer)
-
Sweet Spot Morphing Channel Strip (Compressor & EQ)
-
Guitar Amp Classics (Amp Simulator)
-
Ducker
-
Compressor
-
Gate
-
Multi-Band Compressor
-
Delay
-
REV-X (Reverb)
-
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2026 Huber Breese Music. Powered by Shopify
