Products
Rainsong Al Petteway Special Edition Acoustic Guitar - Tobacco Burst
Sold Out $ 3,466.00
I like 12-fret necks for a number of reasons. Moving the neck forward by two frets also moves the bridge more into the center of the top, which, to my ear, gives the guitar a bit more sweetness and warmth. Physically, I find it easier to play since I don't have to extend my left arm away from my body as far to get to the lowest frets. In recent years, I've had to deal with arthritis and tendonitis issues in my left shoulder, so a shorter neck really helps me play with less pain.
The development of the unidirectional soundboard by RainSong seems to have solved one of the issues that most people have with carbon graphite guitars. By replicating the grain that happens naturally in a piece of wood, this top seems to vibrate more like a wood top, resulting in a bit more of a natural response in the lower frequencies without messing up the balance in the mids and highs. It makes it extremely easy to mic the guitar for live performance or in the recording studio since EQ is not necessary to take any "boom" or "mud" out or to add highs in.
The all-carbon body construction, the OM body shape and the 12-fret neck working together with the unidirectional top produces a clarity that is truly spectacular. This combination has never been available in this size guitar before and I am very excited about it.
The Gotoh SGV510Z tuners are amazing and they make possible a degree of precision tuning that professional and amateur fingerstyle guitarists alike will really appreciate, especially if they use a variety of altered tunings like I do.
The onboard LR Baggs Stage Pro Anthem system is a perfect match for this guitar. The built in microphone and pickup combination can be blended to get just the right amount of each in the mix. I've found that the EQ can be set almost flat since this system matches the guitar so well. I also appreciate having the built-tuner that mutes the signal when I tune.
All in all, the combination is hard to beat. I'm somewhat of a traditionalist when it comes to design. I had wanted RainSong to make a plain fingerboard for many years and I also felt that if they could make it look more like a wooden guitar, it might appeal to more people in the world of acoustic guitar. The plain fingerboard and simple pinstripe sound hole rosette in place of sharks and fancy abalone seem to be more fitting on a guitar being used in this setting. And to top it off they've come up with a beautiful tobacco sunburst finish instead of the standard jet black. With its satin finish, the APSE not only looks like a vintage instrument from the audience but it doesn't reflect the stage lights into their eyes. I even think that the finish they used contributes to the tone by making it "rounder" sounding when unplugged. Of course, that may just be in my head, but I feel like I can hear a difference. I love it when folks come up after a show and say "that guitar sounds great, what kind is it?"
An extra bonus of owning RainSong guitars is that you can travel with them and not worry about damage from handling, temperature or humidity. I put my APSE in a padded gig bag and carry it on board the plane with me. It's small enough to fit in most overhead bins and If I have to check it at the gate, I still don't worry about it like I would one of my expensive wooden guitars. When I have to make that inevitable long walk through the airport terminal to make a connection, the guitar is so lightweight that I don't mind carrying it. If it gets stolen, I can replace it with another exactly like it within a day or two. I think this guitar has the perfect combination of features whether you are a professional performing guitarist or just someone who loves playing guitar. There is no better quality guitar available in this price range. Thank you RainSong for making my life so much easier.
- Soundboard: All-graphite Unidirectional Carbon soundboard crafted using RainSong's Projection Tuned Layering™ technique.
- Body: All-graphite body. No body braces.
- Neck: 12-fret all-graphite NS neck and composite fingerboard fabricated using RainSong's Performance Shape Casting™ as a single piece. Adjustable truss rod.
- Accessories: Tusq™ Nut, saddle and bridgepins.
- Case: Customized hardshell case.
- Finish: UV protective, urethane in satin tobacco burst color.
- Depth at end-pin: 4.1 inches
- Lower bout: 15.3 inches
- Body Length: 19.5 inches
- Neck width at nut: 1.75 inches
- Scale length: 24.875 inches
- Tuning machines: Chrome plated Gotoh SGV510Z-L5-C tuners with 1:21 gear ratio
- Electronics: LR Baggs Stage Pro Anthem Electronics
Rainsong BI-OM1000N2 Acoustic Guitar
Sold Out $ 3,466.00
Rainsong Black Ice Series BI-WS1000N2 Graphite Acoustic Guitar
$ 2,599.99 $ 3,466.00
Unique in design and in tone.
The RainSong Black Ice Series BI-WS1000N2 is an acoustic-electric guitar that embodies artistry in every graphite fiber from which it's constructed. The soundboard on this Rainsong guitar is meticulously crafted individually to make every Black Ice guitar unique, aesthetically pleasing, but not overbuilt.
The WS is a wonderfully versatile guitar. Combining the best qualities of large and small-bodied guitars, this body shape is ideally suited for a variety of musical situations. A large, deep chamber gives the WS strong projection and rich bass. The narrow waist and tight upper bout encourage ringing treble, good balance and clear definition of individual notes. Overall, RainSong WS guitars are impeccably balanced. The shapely curves and light weight make this RainSong Black Ice Guitar comfortable to cradle or to stand with. The RainSong Black Ice guitar's extra-deep cutaway encourages playing up the fretboard.
The guitar's N2 neck is a result of an extensive, long-term collaboration with renowned artist Steve Miller and master luthier John Bolin. The neck design is based on a modified U profile that has been popular in guitars since the 1950s. While the N2 guitar neck has a more substantial feel than the original RainSong 6-string neck, it is ergonomically sound and actually results in better transfer of string vibration energy to the soundboard. The N2 neck features a truss rod that is accessible from the headstock. Because graphite does not warp or bow with changes in humidity and temperature, the purpose of a truss rod in this RainSong N2 neck is to allow you to customize the relief to suit your playing preferences.
Includes RainSong hardshell case.
FEATURES
- Soundboard: All-graphite Black Ice soundboard crafted using RainSong's Projection Tuned Layering technique. No soundboard braces. Abalone rosette.
- Body: All-graphite body. No body braces.
- Neck: All-graphite N2 neck and composite fingerboard fabricated using RainSong's Performance Shape Casting as a single piece. Adjustable truss rod. Custom mother-of-pearl sharks.
- Accessories: Tusq nut, saddle. MOP inlaid Tusq bridgepins.
- Finish: UV protective, high-gloss, clear urethane
- Depth at end-pin: 5"
- Lower bout: 15.8"
- Body length: 19.5"
- Neck width at nut: 1.75"
- Scale length: 25.4"
- Tuning Machines: Chrome-plated custom Gotohs with 1:18 gear ratio
- Electronics: Fishman Prefix Plus-T
- Includes RainSong hardshell case
Rainsong CH-WS1000NS Concert Hybrid Acoustic Guitar
$ 1,999.00 $ 2,666.00
The best of all worlds. Designed with the performing artist in mind, the Concert Hybrid series harmoniously blends the best features from all our lines. We matched the warm and responsive unidirectional Carbon soundboard from the Concert Series, the mellow Carbon/Glass body construction from the Hybrid Series, and the intimate short-scale 12-fret neck. The stunning high-gloss finish on the soundboard is complemented by a visually pleasing satin body and the comfortable playability of a satin neck. Blacked-out appointments give the Concert Hybrid series instruments an understated yet distinctly suave appearance.
Combining the best qualities of large and small bodied guitars, it is ideally suited for a variety of musical situations. A large, deep chamber gives the WS strong projection and rich bass. The narrow waist and tight upper bout allow for a ringing treble, good balance and clear definition of individual notes.Overall, the WS is impeccably balanced. The shapely curves and light weight make the WS a comfortable guitar to cradle or stand with. The extra deep cutaway encourages playing up the fretboard.
Specifications
- Soundboard: All-Carbon Fiber Unidirectional Carbon soundboard crafted using Projection Tuned Layering technique. No soundboard braces. Pinstripe rosette
- Body: Carbon/Glass hybrid body. No body braces.
- Neck: 12-fret all-Carbon Fiber neck and composite fingerboard fabricated using RainSongs Performance Shape Casting as a single piece. Adjustable truss rod.
- Accessories: Black Tusq&trade Nut, saddle and bridgepins
- Finish: UV protective, clear urethane. High gloss on soundboard, satin on back/sides/neck.
- Depth at end-pin: 5 inches
- Lower bout: 15.8 inches
- Body Length: 19.5 inches
- Neck width at nut: 1.75 inches
- Scale length: 24.875 inches
- Tuning machines: Black Gotoh with 1:18 gear ratio
- Overall Length: 38.5
- Frets Clear of Body: 12
- L.R. Baggs Element
Rainsong CO-JM1000N2 Acoustic Guitar - Natural Carbon
$ 2,349.00 $ 3,132.00
How do you describe RainSong's JM? Three words: loud, loud, and loud. And if that's not enough, it's also loud. This is the largest body RainSong builds. The sheer size, combined with the attributes of Projection Tuned Layering™ make the JM one of the loudest acoustic guitars on the planet. This guitar is loud. We had to say it again. But the JM is not just about power. The narrow waist and some layering refinements specific to the Jumbo soundboard give the JM some real fingerstyle grace. The guitar is strong, but impeccably balanced, with bass, mids and trebles distinct, clear and, dare we say it again, loud.
Specifications
- Soundboard All-graphite soundboard crafted using RainSong's Projection Tuned Layering™ technique. No soundboard braces. Abalone rosette.
- Body: All-graphite body. No body braces.
- Neck: All-graphite neck and composite fingerboard fabricated using RainSong's Performance Shape Casting™ as a single piece. Adjustable truss rod. Custom shark inlays.
- Accessories: Tusq™ Nut, saddle and bridgepins.
- Case: Customized hardshell case.
- Finish: UV protective, high-gloss, clear urethane.
- Depth at end-pin: 5 inches
- Lower bout: 17 inches
- Body Length: 21 inches
- Neck width at nut: 1.75 inches
- Scale length: 25.4 inches
- Tuning machines: Chrome plated Gotohs with 1:18 gear ratio
- Electronics: Fishman Prefix+T / LR Baggs Stagepro Element
- Price: $2,349
Rainsong CO-OM1000NS Orchestra Model Acoustic Guitar - Carbon Fiber
$ 2,499.00 $ 3,332.00
ABOUT RAINSONG CARBON FIBER GUITARS
RainSong guitars are built entirely out of carbon fiber, so they aren't affected by changes in temperature and humidity. RainSong's guitars are immune to problems like warping, cracking, or tuning and setup instability.
These qualities make RainSong guitars ideal for players living in dry or humid climates, but the toughness of carbon fiber means they're also great for travel and gigging.
In addition to their rugged design, RainSong guitars sound amazing and are easy to play. Many people are surprised to learn that carbon fiber makes an excellent soundboard material, and it gives RainSong guitars a tone that's surprisingly close to a wood guitar while still being unique.
THE CONCERT SERIES
RainSong's Concert Series have unidirectional carbon fiber tops. This type of carbon fiber simulates the grain found on natural wood, helping to give the Concert Series a subtly warmer tone.
"SHORTY" 12-FRET NECK
This RainSong features a "Shorty" 12-fret neck which joins the body at the 12th fret instead of the 14th fret. This translates to a shorter scale and shifted bridge position.
12-fret RainSong guitars have a shorter scale, which translates to slightly lower string tension and frets that are a little closer together. Some players find short scale guitars a bit easier to play than full scale instruments.
The lower tension and altered bridge placement also tends to produce a tone that is a little warmer and more bass-focused than 14-fret guitars, although the difference is often subtle.
THE CONCERT SERIES
RainSong's Concert Series have unidirectional carbon fiber tops. This type of carbon fiber simulates the grain found on natural wood, helping to give the Concert Series a subtly warmer tone.
SPECS
- Orchestra Mode (OM) body
- Unidirectional carbon fiber top
- Carbon fiber back/sides
- Composite fingerboard
- 1-3/4" nut width
- 24.9" scale
- L.R. Baggs Stagepro Element electronics
- RainSong hardshell case
Rainsong CO-PA1000NS Parlor Acoustic Guitar - Carbon Fiber
Sold Out $ 3,332.00
A little guitar that packs a full, bright sound and a rich depth of tone typical of RainSongs. The Parlor body combines the traditional compact shape with a modern Venetian cutaway for a perfectly proportioned intimate guitar with excellent access to the upper frets. A lower bout of 13-1/3” and depth of 4-1/8” makes it RainSong’s smallest body. The small size of the Parlor belies full and rich sound.
The Concert Series is all about Warm Tone. These are the lightest soundboards built by RainSong using unidirectional carbon. Unidirectional carbon mimics the tight grain of a fine spruce soundboard. Thus, it is not surprising that this line produces a warmer tone.
SPECS
- Soundboard: All-Carbon Fiber Unidirectional Carbon soundboard crafted using Projection Tuned Layering technique. No soundboard braces. Abalone rosette
- Body: Carbon/Glass hybrid body. No body braces.
- Neck: 12-fret all-Carbon Fiber neck and composite fingerboard fabricated using RainSongs Performance Shape Casting as a single piece. Adjustable truss rod.
- Tusq nut, saddle and bridge pins
- Finish: UV protective, clear urethane. High gloss on soundboard, back, sides and neck.
- Depth at end-pin: 4.125 inches
- Lower bout: 13.34 inches
- Body Length: 18.78 inches
- Neck width at nut: 1.75 inches
- Scale length: 24.875 inches
- Tuning machines: Chrome Gotoh with 1:18 gear ratio
- Overall Length: 37.78 inches
- Frets Clear of Body: 12
- Includes Hardshell Case
Rainsong CO-PA9000NS Nylon String Acoustic Guitar
$ 2,499.00 $ 3,332.00
The RainSong CO-PA9000NS Concert Series Nylon Parlor features the lightest soundboards built by RainSong for a full, rich tone. Other features include all-graphite Unidirectional Carbon soundboard crafted using RainSong's Projection Tuned Layering technique. No soundboard braces. Abalone rosette. All-graphite body. No body braces. All-graphite N2 neck and composite fingerboard fabricated using RainSong's Performance Shape Casting as a single piece. Adjustable truss rod. Custom Mother of Pearl sharks. Tusq Nut, saddle. MOP inlaid Tusq bridgepins. Customized hardshell case. UV protective, high-gloss finish.
- NS 12-Fret neck, Shark inlays, Side dots
- Custom Ultra Light Unidirectional Carbon Fiber soundboard
- Carbon Fiber Back & Sides
- Tusq nut, saddle and bridge pins
- High gloss finish
- Depth at end-pin: 4.15 inches
- Lower bout: 13-3/8 inches
- Body Length: 18.8 inches
- Neck width at nut: 1.75 inches
- Scale length: 24.9 inches
- OAL: 37.8 inches
- Tuning machines: Gotoh 18:1
- Electronics: Fishman Prefix
- Deluxe Hardshell case incuded
Rainsong CO-WS1005NST Concert Acoustic Guitar - Tobacco Sunburst
$ 2,574.00 $ 3,432.00
A new listening experience for the player that accentuates the sparkling trebles and the full bass. This guitar is especially well suited for alternate tunings. The CO-WS1005NST, like all the other members of the Concert Series, has an all-graphite body and a unidirectional Carbon soundboard. Unique to this model is the offset soundhole and the 12-fret, short scale (24.9”) neck.
The neck of the CO-WS1005NST joins the body at the 12th fret rather than the 14th fret. This moves the bridge back on the soundboard towards the center of the lower bout resulting in improved sonic energy transmission from the strings to the soundboard and enhanced bass response.
The soundhole of the CO-WS1005NST is located on the player’s side of the upper bout. The proximity to the player’s ear produces a sense of increased volume. The reduced size of the soundhole combined with the uninterrupted larger vibrating surface of the soundboard accentuates the highs and the lows relative to the mids.
Like all RainSongs, the CO-WS1005NST uses Projection Tuned LayeringTM for the crystal detail, warmth and volume of the classic carbon sound. All-composite construction means a robust instrument that can withstand variations in humidity and temperatures.
Top-of-the-line Fishman Prefix electronics with a built-in tuner makes the CO-WS1005NST a stage-ready instrument.
The CO-WS1005NST sports an elegant tobacco burst color high-gloss UV protective polyurethane finish.
Specifications:
Soundboard: All-graphite soundboard crafted using RainSong's Projection Tuned Layering™ technique. No soundboard braces. Abalone rosette.
- Body: All-graphite body. No body braces.
- Neck: All-graphite NS neck and composite fingerboard fabricated using RainSong's Performance Shape Casting™ as a single piece. Adjustable truss rod. Custom shark inlays.
- Accessories: Tusq™ Nut, saddle and bridgepins.
- Case: Customized hardshell case.
- Finish UV protective, high-gloss, urethane in tobacco burst color
- Depth at end-pin: 5 inches
- Lower bout: 15.8 inches
- Body Length: 19.5 inches
- Neck width at nut: 1.75 inches
- Scale length: 24.9 inches
- Tuning machines: Chrome plated Gotohs with 1:18 gear ratio
- Electronics: Fishman Prefix+T / LR Baggs Stagepro Element
Rainsong Concert Series CO-WS1000N2 Acoustic Guitar
$ 2,499.99 $ 3,332.00
The RainSong Concert Series CO-WS1000N2 is a graphite acoustic-electric guitar that is all about warm tone. This concert-size guitar boasts the lightest soundboards built by RainSong using unidirectional carbon, a material that mimics the tight grain of a fine spruce soundboard.
The Rainsong WS1000N2 is a wonderfully versatile guitar. Combining the best qualities of large and small-bodied guitars, the concert body shape is ideally suited for a variety of musical situations. A large, deep chamber gives the WS1000N2 strong projection and rich bass. The narrow waist and tight upper bout produce ringing treble, good balance and clear definition of individual notes. Overall, the Rainsong WS1000N2 is impeccably balanced. The shapely curves and light weight make the WS1000N2 guitar comfortable to cradle while sitting or to stand with. The extra-deep cutaway encourages playing up the guitar's fretboard.
The Rainsong N2 neck is a result of an extensive, long-term collaboration with renowned artist Steve Miller and master luthier John Bolin. The neck design is based on a modified "U" profile that has been popular in guitars since the 1950s. While the Rainsong N2 guitar neck has a more substantial feel than the original RainSong 6-string neck, it is ergonomically sound and actually results in better transfer of string vibration energy to the soundboard. The N2 neck features a truss rod that is accessible from the head stock. Because Graphite does not warp or bow with changes in humidity and temperature, the purpose of a truss rod in the Rainsong N2 guitar neck is to give you the ability to customize the relief to suit your preferences.
- Soundboard: All-graphite Unidirectional Carbon soundboard crafted using RainSong's Projection Tuned Layering technique. No soundboard braces. Abalone rosette.
- Body: All-graphite body. No body braces.
- Neck: All-graphite N2 neck and composite fingerboard fabricated using RainSong's Performance Shape Casting as a single piece. Adjustable truss rod. Custom mother-of-pearl sharks.
- Accessories: Tusq nut, saddle. MOP inlaid Tusq bridgepins.
- Finish: UV protective, high-gloss, clear urethane
- Depth at end-pin: 5"
- Lower bout: 15.5"
- Body length: 19.5"
- Neck width at nut: 1.75"
- Scale length: 25.4"
- Tuning Machines: Chrome-plated custom Gotohs with 1:18 gear ratio
Rainsong H-OM1000N2M Acoustic Guitar - Marine Burst
$ 2,449.99 $ 3,232.99
Because of Projection Tuned Layering™, the OM is capable of strong projection. It won't rattle windows like the Jumbo or the Dreadnought, but the OM, when driven, packs a lot of power and punch for a small bodied guitar.
Specifications
- Soundboard: Carbon/Glass hybrid soundboard crafted using RainSong's Projection Tuned Layering™ technique. No soundboard braces.
- Body: Carbon/Glass hybrid body. No body braces.
- Neck: All-graphite neck and composite fingerboard fabricated using RainSong's Performance Shape Casting™ as a single piece. Adjustable truss rod.
- Accessories
- Tusq™ Nut, saddle and bridgepins
- Case: Customized hardshell case
- Finish: UV protective, high-gloss, clear urethane
- Depth at end-pin: 4.125 inches
- Lower bout: 15.25 inches
- Body Length: 19.5 inches
- Neck width at nut: 1.75 inches
- Scale length: 25.4 inches
- Tuning machines: Chrome plated Gotohs with 1:18 gear ratio
- Electronics: Fishman Prefix+T / LR Baggs Stagepro Element
Rainsong H-WS1000N2 Hybrid Acoustic Guitar
$ 1,899.00 $ 2,532.00
Rainsong Hybrid Series H-DR1000N2T Acoustic Guitar Tobacco Sunburst
$ 1,824.00 $ 2,275.00
- Hand Crafted In Woodinville, Washington
- Tobacco Sunburst Top
- Dreadnought Body Size
- All Carbon/Glass Hybrid Composite Top, Back, And Sides
- No Soundboard Bracing
- Single Piece Graphite “N2 Shaped” Composite Neck With An Adjustable Truss Rod
- 25.4” Scale Length
- 1.75” Width At The Nut
- With The Fishman Prefix Plus T Electronics
- Hardshell Case
Rainsong Nashville Series N-JM1100N2 Jumbo Acoustic Guitar - Sunburst Carbon Fiber
$ 3,499.00 $ 4,666.00
How do you describe RainSong's JM? Three words: loud, loud, and loud. And if that's not enough, it's also loud. This is the largest body RainSong builds. The sheer size, combined with the attributes of Projection Tuned Layering™ and Soundboard Fusion Technology™ make the JM one of the loudest acoustic guitars on the planet. This guitar is loud. We had to say it again. But the JM is not just about power. The narrow waist and some layering refinements specific to the Jumbo soundboard give the JM some real fingerstyle grace. The guitar is strong, but impeccably balanced, with bass, mids and trebles distinct, clear and, dare we say it again, loud.
Specifications
- Soundboard: Unidirectional carbon/spruce soundboard crafted using RainSong’s Soundboard Fusion Technology™ technique. No soundboard braces. Pinstripe rosette.
- Body: All-graphite body. No body braces.
- Neck: All-graphite neck and epoxy fingerboard fabricated using RainSong’s Performance Shape Casting™ as a single piece. Adjustable truss rod. Custom abalone shark inlay.
- Accessories: Tusq™ Nut, saddle and abalone inlaid bridgepins.
- Case: Customized hardshell case.
- Finish: UV protective, high-gloss, clear urethane.
- Depth at end-pin: 5 inches
- Lower bout: 17 inches
- Body Length: 21 inches
- Neck width at nut: 1.75 inches
- Scale length: 25.4 inches
- Tuning machines: Chrome plated Gotohs with 1:18 gear ratio
- Electronics: None
Rainsong V-DR1100N2 Acoustic Guitar - Natural Spruce
$ 3,299.00 $ 4,398.00
V-DR1100N2
To combine the stability and robustness of carbon fiber with the traditional aesthetics of wood, RainSong has developed SFT: Soundboard Fusion Technology. After careful experimentation, we are able to fuse a thin spruce soundboard and a unidirectional pre-impregnated carbon top in a single molding step. The resulting SFT soundboard is a composite matrix that resonates as a single unit, like a solid wood soundboard. The physical properties of the carbon fiber far exceed those of the thin wood. Hence the SFT soundboard maintains the imperviousness to humidity and temperature of carbon fiber.
An SFT soundboard delivers rich crystalline carbon sound subtly colored by wood.
The Dreadnought is the traditional workhorse of acoustic guitar music. With a large, deep body and wide waist, RainSong's DR has the powerful bass and ringing treble of a great rhythmic guitar, but still maintains a wonderfully balanced sound, with clear distinction among individual notes. From rhythm to lead, the DR makes its presence known. Capable of cutting through admirably in any acoustic setting, the DR is loud enough to compete with banjoes, mandolins and other traditional volume hogs.
Specifications
Soundboard: Unidirectional carbon/spruce soundboard crafted using RainSong’s Soundboard Fusion Technology™ technique. No soundboard braces. Pinstripe rosette.
Body: All-graphite body. No body braces.
Neck: All-graphite neck and epoxy fingerboard fabricated using RainSong’s Performance Shape Casting™ as a single piece. Adjustable truss rod. Abalone dots inlay.
Accessories: Tusq™ Nut, saddle and abalone inlaid bridgepins.
Case: Customized hardshell case.
Finish: UV protective, high-gloss, clear urethane.
Depth at end-pin: 5 inches
Lower bout: 16 inches
Body Length: 20 inches
Neck width at nut: 1.75 inches
Scale length: 25.4 inches
Tuning machines: Chrome plated Gotohs with 1:18 gear ratio
Electronics: None
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2020 Huber Breese Music. Powered by Shopify
