Effects
Radial Big Shot ABY True Bypass Switcher
$ 134.99 $ 188.98
Effective control for your two-amp setup
The BigShot ABY makes it easy to run two amps on stage, without introducing noise or altering your tone. The pedal has two latching footswitches that allow you to choose which amp is active, or run through both simultaneously. The second amp output features a ground lift and an isolation transformer that can be engaged to eliminate buzz and hum from ground loops, while a 180° polarity reverse switch ensures both amps play back in phase to avoid frequency cancellation. When powered by an external 9V supply or pedalboard power brick, LEDs provide instant on-stage visual feedback - when power is unavailable, the passive audio circuit still works unaffected. Best of all, the BigShot ABY is true-bypass device, without any tone-altering buffers between the guitar and the amplifier to ensure you retain the pure tone of your instrument.
Features
- True bypass ABY amp selector with tuner out
- On-board transformer to eliminate ground buzz
- 180° polarity reverse to phase-align amps
- Bright LED status indicators
Applications
- Switch between or combine two amps
- Switch between two instruments and one amp
- Tuner output is always on for quick adjustments
Cool Stuff
- Plug and play easy to use
- 100% passive audio circuit
- Compact and rugged, perfect for pedalboards
- Works with all instruments: guitar, bass, keys
Dimensions (W x D x H)
- 3.6” x 4” x 2” (92mm x 100mm x 51mm)
- 3 Year transferable warranty
Radial Engineering AC-Driver Compact Acoustic Preamp Pedal
$ 209.99 $ 252.00
Great tone can be simple
The AC-Driver allows you to obtain great sounding results in a short amount of time, with powerful easy-to-use controls that allow you to set your levels and reduce on-stage feedback. An adjustable low cut filter removes excessive low frequencies, while a 180° phase switch helps correct feedback build-up from hot spots on stage. A variable notch filter targets and removes specific problem frequencies, and a mute footswitch provides a way to silently tune on stage or change instruments without any popping or noise in the PA.
- Studio quality preamp and class-A buffer circuit
- Balanced DI output to feed a PA or powered speaker
- Mute footswitch for instrument changeovers
- Notch filter and phase switch to reduce feedback
Radial Engineering Highline Stereo Passive Line Isolator
$ 249.99 $ 349.98
From Pedal to Performance
The Highline Stereo is a two channel passive line isolator designed to connect guitar and amp modelers to a mixer for live touring and recording applications, featuring premium Jensen transformers for exceptional audio performance.
Specs
| Audio circuit type: | Passive, transformer based | |
| Transformer: | JT-11-YMPC | |
| Number of channels: | Two channels (dual mono) | |
| Frequency response: | 20Hz ~ 20KHz (± 0.05dB) | |
| Total harmonic distortion: | <0.05% from 20Hz ~ 20kHz / -10dB, 0.0008 @1kHz / -10dB | |
| Phase Deviation: | ±0.3° from 20Hz ~ 20kHz / -10dB | |
| Signal to Noise: | 112dB | |
| Features | ||
| Ground lift | ||
| Input Connectors: | XLR Sum, Thru Sum | |
| General | ||
| Construction: | 14-gauge steel outer shell & 16-gauge chassis | |
| Finish: | Durable powder coat | |
| Size (L x W x D): | 5" x 3.3" x 1.8" (127mm x 84.1mm x 45.5mm) | |
| Shipping size (L x W x D): | 6.5" x 4" x 3" (165mm x 102mm x 76mm) | |
| Power: | Passive, no power required | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-Year, Transferable | |
Radial Engineering Switchbone V2 Amp Selector and Boost Effects Pedal
$ 479.99 $ 576.00
The Switchbone V2 may well be the ultimate guitar amp switcher. This device lets you switch and combine up to three guitar amplifiers without introducing distortion, switching noise, or hum into the signal path. Most importantly, it will retain the natural tone and feel of your instrument so that your natural playing style shines through. The Switchbone V2 may be used as a standard ABY switcher with both A and B outputs used separately or together, or the tuner output can be repurposed to feed a third amplifier. A built-in power booster at the output delivers up to +18db of ultra-clean boost with the option to add mid-boost for extra sustain when playing lead.
| Specifications | ||
|---|---|---|
| Audio circuit type: | Discrete Class-A | |
| Gain: | Unity to +12dB (Baseline gain) | |
| Input Impedance: | Variable with drag control | |
| Output Impedance: | 10k Ohm | |
| Noise Floor: | -111dB | |
| Features | ||
| 180° polarity reverse, Ground lift, Boost | ||
| Input Connectors: | 1/4" input | |
| Output Connectors: | 4 1/4" outputs | |
| General | ||
| Construction: | 14-gauge steel chassis & outer shell | |
| Size (L x W x D): | 6.62" x 4.5" x 2" (168 x 114 x 51mm) | |
| Weight: | 2.35lb (1.07kg) | |
| Shipping size (L x W x D): | 10.75" x 4.75" x 2.5" (273 x 120 x 64mm) | |
| Shipping weight: | 3.35lbs (1.5kg) | |
| Power: | 15VDC 400mA, center pole positive | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-year, transferable | |
Radial Tonebone PZ-Pre Guitar Preamp USED
$ 199.00
**This preamp is used and being sold on consignment. It is in excellent condition with little to no signs of wear. Comes with the power adapter. The price has been adjusted accordingly.
Specs
Radial Twin City Active ABY Amp Switcher
$ 229.99 $ 321.98
Active circuitry for noise-free switching
The Radial Twin-City uses a class-A input buffer to drive the amp outputs, which reduces susceptibility to noise and allows for completely silent switching on stage. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output-B, along with a ground lift switch and 180⁰ polarity reverse switch that ensures both amplifiers play back in phase with each other. At the input, Drag Control load correction allows you to recreate the natural load on the pickups as if you were connected directly to a tube amplifier, allowing the natural tone of your instrument to shine through.
Features
- Class-A audio signal path for high quality audio
- Drag control load correction for natural feel
- Isolated output to eliminate hum & buzz
- Electronic Impulse Switching to eliminate popping
Benefits
- Delivers the natural sound of your guitar to your amp
- Lets you transition between amps without noise
- Super compact, fits on any pedalboard
- Buffering circuit lets you drive long cables without hum
Cool Stuff
- Same signal path as the JD7 used by Vai, Lukather, Santana
- 180° polarity reveres switch ensures amps play in phase
- Easy to see LED indicators lets you know which amp is active
- No noise. Now that’s really important!
Dimensions (W x D x H)
- 3.6” x 4” x 2” (92mm x 100mm x 51mm)
- 3 Year transferable warranty
Retro-Sonic Flanger Pedal USED
Sold Out
**This pedal is used and being sold on consignment. It is in excellent condition with little to no signs of wear. Comes with the original packaging. The price has been adjusted accordingly.
Specs
- Input Jack: ¼-inch Standard Phone Jack
- Output Jack: ¼-inch Standard Phone Jack
- Controls: Rate, Range, Level, Color, Filter Selector
- Switch: Normal/Effect
- Power Supply: 12-18V Negative Pin Adapter
- Dimensions: 4.4 x 2.3 x 1.1 inches
Retro-Sonic Phaser Pedal USED
$ 125.00
**This pedal is used and being sold on consignment. It is in good condition with little to no signs of wear. The price has been adjusted accordingly.
Specs
Retro-Sonic Phaser. The Phaser is based on the famous 4-stage Script 90 circuit known for its classic phase tone. The Script design is updated with the finest components, providing clean distortion free phasing with low noise and tonal transparency. The updates also include the addition of depth, resonance and level controls to add further versatility to the original design.
For even smooth phasing, the JFETs used in the circuit are sorted by hand and matched for the best possible phase experience. A weak battery can alter the output of the Phaser. The unit works best when using a 9vdc adapter to provide a consistent power source.
Features
-
Clean, smooth phasing effect
-
Precision matched JFETs
-
Heavy duty foot switch for True By-Pass switching
-
Sturdy cast aluminum housing
-
On/Off LED to check effect status and battery condition
-
Powered by 9v battery or 9v DC adapter
Controls
-
Speed: Controls the rate of the phase effect
-
Depth: Controls the intensity of the phase effect
-
Level: Controls the output level of the effected tone. Typically output levels of both normal and effect are adjusted to equal levels
-
Res: Controls the amount of resonance (feedback) in the phase effect
-
Normal/Effect Switch: Stepping on the switch turns the effect on and off
Roland EV-5 Expression Pedal
$ 85.99 $ 120.00
The EV-5 Expression Pedal is designed for use with keyboards or other Expression-compatible instruments and devices, providing a more dynamic performance. You can set the minimum volume to the level of your choice, thereby determining the maximum effect of the pedal.
Specs
Cable & Connectivity
-
Cable Length: 2 m
-
Connector: TRS 1/4" plug
Controls
-
Main Control: Volume pedal
-
Additional Control: Minimum volume knob
Dimensions
-
Width: 86 mm (3-7/16")
-
Depth: 200 mm (7-7/8")
-
Height: 54 mm (2-3/16")
Weight
-
Weight: 400 g (0 lb 15 oz)
Strymon BigSky Multidimensional Reverb Effects Pedal
$ 479.00
Clear Skies Ahead.
Plug into BigSky and instantly lift your sound into the stratosphere. The world below you fades into the distance, and you’re elevated into a glow of lush, glorious, radiant reverbs.
To create a reverb experience as natural, beautiful, and immersive as BigSky required tremendous feats of sound engineering and artistic imagination. Using the fundamentals of acoustical science as our beacon, we carefully studied and scientifically analyzed reverb technology from the past fifty years. We faithfully captured the essence of these classic sounds, and forged ahead to dream up our vision of reverbs from the future.
Go where no reverb has gone before.
Feel the mechanical tension of the Spring reverbs. Hear the floating particles of the Cloud machine. Defy the laws of physics with the Nonlinear reverbs. Unleash the multi-head reverberations of the Magneto machine. BigSky gives you twelve studio-class reverb machines, each with simple yet powerful controls.
Features
Simple Yet Powerful Controls
- We’ve gone to extraordinarily lengths to craft BigSky to empower your creativity without getting in the way of it.
- We’ve hand-picked the most essential reverb controls, and tailored their range and functionality so that sounds can be created effortlessly without extended tweaking.
300 Built-In Presets
- BigSky gives you the option to instantly save and recall up to 300 of your own presets.
- Easily bank up or down through your presets using the front panel switches.
- Give each preset its own custom name to appear on the display.
- You can even select presets via an external MIDI controller.
Expression Pedal Control
- Plug in an expression pedal and control any knob or combination of knobs, including parameters assigned to Param knobs, all saveable per preset.
- Or plug in an external momentary Tap switch for remote control of Pre-Delay (or Decay time with the Magneto and Nonlinear machines).
- There are occasionally times as guitarists where we don’t use guitar amplifiers.
- You might be using a full-range PA system, recording direct, or using headphones.
- Because reverb pedals are usually placed last in your effects chain, we felt that BigSky could provide more utility for these situations.
- Just turn on the selectable Cab Filter to engage our sophisticated speaker response curve.
- Your dirt pedals will sound amp-like, and your clean guitar will have a present yet rounded response.
Assignable Knobs
- Do you like to tweak some knobs more than others? BigSky gives you the ability to assign custom parameters to the two Param knobs on the front panel, all saveable per preset.
- Bring your most used menu parameters to the front panel, allowing a very quick way to tweak your sound on the fly.
- Press-and-hold your active preset footswitch to activate either Infinite Sustain or Freeze, configurable per preset.
- Infinite Sustain allows your reverbs to continue infinitely, with each new note you play adding to the reverb signal.
- Freeze also delivers infinite sustain, but allows you to play new notes on top of the sustain without adding to the reverb.
Spillover / Reverb Persist
- Engage Spillover to allow reverb decays to “spill over” from one preset to the next.
- You can also turn on Reverb Persist to allow your reverb decay trails to continue even after you hit bypass.
Extensive MIDI Support
- Have a more complex rig? BigSky offers a complete MIDI implementation to connect to your MIDI gear.
- Remote control any knob, parameter, or switch. Select your presets via MIDI.
- Organize and back up your presets to your Mac or PC using a MIDI to USB adapter and our Librarian software.
Specs
- Hand crafted, studio-class reverb algorithms deliver lush, gorgeous, and musically inspiring reverb experiences
- Twelve reverb machines to choose from: Room, Hall, Plate, Spring, Swell, Bloom, Cloud, Chorale, Shimmer, Magneto, Nonlinear, Reflections
- Seven front-panel tone shaping knobs: Decay, Pre-Delay, Mix, Tone, Mod, Param 1, Param 2 (Param knobs assignable per preset)
- Additional menu parameters allow for easy customization of reverb sounds
- 300 easily accessible and namable presets
- Press-and-hold Infinite Sustain and Freeze functions, saveable per preset
- Spillover and Reverb Persist modes, saveable per preset
- Selectable Speaker Cabinet emulation for direct-to-PA gigs or recording applications
- Three rugged metal footswitches for preset selection and effect bypass
- LED display for preset info, reverb decay time, and extended parameter control
- Multi-color preset LEDs (green for active preset, amber for edited preset)
- Full MIDI implementation allows extended control for those with more complex rigs
- Sturdy and lightweight light blue anodized aluminum chassis, with laser-etched artwork
- Durable black anodized aluminum knobs
- Studio-grade audio input and output jacks
- Stereo input and output
- Expression pedal input with selectable control over any knob or combination of knobs, saveable per preset (also configurable as external tap input)
- MIDI input and output
- Included 9V center-negative power supply (300mA minimum required)
- Analog dry path for a zero latency dry signal that is never converted to digital
- Premium analog front end and output section
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters
- 115dB typical signal to noise at 50% wet mix (120db at 100% dry mix, 109dB at 100% wet mix)
- 20Hz to 20kHz frequency response
- +8dBu maximum input level easily handles instrument and line signals
- Super high performance DSP in a compact form factor
- 32-bit floating point processing
- 366MHz SIMD SHARC processor core, capable of 2.4 Gigaflops peak performance
- True Bypass (electromechanical relay switching)
- High quality, tranparent Analog Buffered Bypass mode
- +/- 3dB Boost/Cut, saveable per preset
- Optional Kill Dry mode mutes dry signal, for use in parallel effects loops
- Dimensions: 6.75″ (171mm) wide, 5.1″ (130mm) deep
- Designed and Built in the USA
Strymon Blue Sky Reverberator Guitar Pedal
$ 379.00 $ 568.00
Higher Elevation.
The pedal that revolutionized compact reverb pedals has evolved. Plug into blueSky for the most lush, majestic reverbs imaginable. Transform a single note or chord into vast sonic atmospheres with impossibly gorgeous, incredibly long reverb tails. Hear the inspiring splash of an upgraded spring algorithm dripping with vintage vibe. Lose track of time and space as you interact with deep and expansive new Shimmer sounds never heard anywhere before.
Specs
Ins, Outs, and Switches
- High impedance ultra low-noise discrete Class A JFET TRS stereo input.
- Low impedance independent TS stereo outputs.
- Expression pedal input allows the connection of a TRS expression pedal, MiniSwitch, MultiSwitch Plus, or TRS MIDI connection.
- USB jack for controlling via MIDI from a computer or for performing firmware updates.
- Dedicated Favorite & On/Off footswitches
Audio Quality
- Premium JFET analog front end
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
- 520MHz ARM Superscalar processor
- 32-bit floating point processing
- 20Hz to 20kHz frequency response
- Audio Input Impedance: 1M Ohm
- Audio Output Impedance: 100 Ohm
More
- Strong and lightweight anodized blue aluminum chassis
- 9V DC power supply included
- Power requirements: maximum 9 volts DC center-negative, with a minimum of 300mA of current
- 4.5” deep (11.43 cm) x 4” wide (10.16 cm) x 2.4” tall (6.1 cm)
- Designed and built in the USA
Strymon Riverside Multi-Stage Drive Effects Pedal
$ 299.00 $ 448.50
A new world of drive.
Riverside is the culmination of a thorough analysis of numerous analog and vacuum tube circuits. Our goal? To deliver a new world of harmonically rich, incredibly versatile, tube-inspired drive sounds. We didn’t want to build just another distortion or overdrive. We knew we must examine what has been done, and bring a new approach to the world of drive sounds.
- Custom cascading multistage distortion topology provides a wide range of tube-inspired drive tones
- Digitally controlled analog class A JFET input gain stage maximizes headroom while adding up to 20dB of pure analog gain
- Precision crafted DSP gain stages provide detailed complexity and responsiveness
- Low gain channel for smooth classic overdrive
- High gain channel for modern saturated distortion
- 3-band EQ with independent Bass, Middle and Treble controls
- Selectable post-analog gain mid-band EQ push
- Presence switch to tailor the sound for use with all amplifiers from dark to bright
- Optional variable-threshold noise reduction helps tame noisy guitar pickups
- High impedance mono input
- Mono output
- Favorite footswitch to save a favorite setting
- Favorite Input to connect an external MiniSwitch to recall a Favorite preset
- Expression pedal input allows the connection an expression pedal for simultaneous morphing control over multiple parameters (Expression mode), or logarithmic taper for smooth volume control (Volume mode)
- MIDI accessible via Expression jack for remote parameter control and access to 300 preset locations
- Boost pedal input allows connection of an external footswitch for up to +6dB of analog boost, or to toggle the Favorite preset on other Strymon pedals (Favorite Out mode)
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
- Premium analog front end and output section
- Super high performance SHARC DSP in a compact form factor
- 32-bit floating point processing
- True Bypass (electromechanical relay switching) or selectable transparent Analog Buffered Bypass
- Strong and lightweight anodized gold aluminum chassis
- 9V DC power supply included
- Power requirements: maximum 9 volts DC center-negative, with a minimum of 250mA of current
- Dimensions:
- 4.5″ deep x 4″ wide x 1.75″ tall
- 11.4 cm deep x 10.2 cm wide x 4.4 cm tall
- Designed and built in the USA
Strymon TimeLine Multidimensional Delay Effects Pedal USED
Sold Out
**This item is used and in good condition. The item works as it should with some signs of wear. Please see the attached pictures. The price has been adjusted accordingly.
Inspiration Machine.
When we decided to create a studio-class stereo delay effects pedal, we knew we must go well beyond what has been done in the past—in sound quality, sonic flexibility, hardware design, and processing power. We spent months locked up in the Strymon sound design labs dreaming up the most spacious, lush, creative, and tweakable delay effects ever heard. It was a monumental task—a relentless study of delays and their nuances, and a continuous pursuit of innovative and musically inspirational sounds. Utilizing a ridiculously powerful SHARC DSP, every drop of processing power is harnessed.
Explore Your Creativity.
TimeLine provides you with twelve unique delay machines, each with extensive control over sonic character and feel. Go from crisp and clear, studio-quality digital delays all the way to the saturated and fluctuating sounds of tape delay machines. Get warm and fuzzy analog style repeats all the way to shimmery, sparkling, and crystalline ice delays.
Tweak to your hearts content and save up to 200 presets of your favorite sounds. Top it all off with full MIDI implementation and a routable, 30-second stereo looper and you’re on your way to delay bliss.
200 Built-In Presets
Are presets your thing? TimeLine gives you the option to instantly save and recall up to 200 of your own presets. Easily bank up or down through your presets using the front panel switches. Or select presets externally with a Multiswitch or MIDI controller.
Multi-Delay With Unrivaled Flexibility
-
12 curated delay voicings capture everything from classic tape delays to ambient soundscapes, all with unparalled sound quality
-
Integrated 30 second stereo looper (60 at half speed)
-
Feedback Loop allows you to process your delays with other effects
-
Full MIDI control + 200 presets
-
Each algorithm includes its own unique set of parameters, from tape age to bucket loss
-
All analog dry path + True or Buffered bypass
TC Electronic T2 Reverb Effect Pedal USED
$ 125.00
**This pedal is used and being sold on consignment. It is in excellent condition with little to no signs of wear. Comes with the original packaging. The price has been adjusted accordingly.
Specs
| Brand |
|
|---|---|
| Model |
|
| Finish |
|
| Categories |
|
| Year |
|
| Made In |
|
Tech 21 SansAmp Para Driver V2 DI Pedal
Sold Out $ 335.00
This floor version of our RPM rackmount provides the same detailed tone shaping possibilities for any signal source. It is particularly useful with acoustic, electric and bass guitars, and upright bass, either direct to a mixing console or with an instrument amplifier. The Para Driver DI gives your instrument a natural warmth and presence, as if miking it through a tube pre-amp. The SansAmp circuitry eliminates the harsh, unnatural harmonics of piezo pickups, while the Drive control offers some tasteful edge — just a little or over-the-top.
Version 2 has exactly the same tonality and functionality with the addition of two new features: Rumble Filter and Air. The Rumble Filter removes unwanted sub-sonic frequencies that cause boominess and audible handling noises associated with acoustic guitars.The Air button adds top-end clarity and sparkle to acoustics.
PARA DRIVER DI
FEATURES
| Active tone controls with 12dB of cut or boost | |
| Sweepable semi-parametric EQ | |
| 1/4-inch 4.7 megOhm instrument level input | |
| 1/4-inch and XLR outputs with selectable levels | |
|
Parallel, uneffected output to run a dry signal to a separate channel |
Tech 21 SansAmp Programmable Bass Driver PBDR
$ 249.00 $ 398.00
Always thinking of our fat-stringed brethren, we had to make a 3-channel, programmable, rig-in-a-box for bassists who can’t get enough of a great thing. Like the TRI-A.C. for guitar, you get three hot tones right at your toetips. The all-analog circuitry features the same controls as its single channel predecessor: Drive, Bass, Treble, Presence, Blend and Level. Digital only in its programmability, you just tweak the knobs until you find a tone, double-tap on a footswitch, and it’s saved in that channel. It’s that simple. Three of your faves — to go!
- Build your Bass Driver DI into a live rig with a Bass Power Engine 60, and run through the PA for extra power.
- Boldly go live with just your Bass Driver DI straight into the PA.
- Bounce into any studio with a Programmable Bass Driver DI and plug directly into the board.
- BUILT-IN SPEAKER/CAB SIM: The 100% analog SansAmp Tube Amplifier Emulation technology encompasses the entire signal chain, from pre-amp to power amp to speaker simulation. An integral part of the circuitry, the SansAmp speaker simulation will complement any type of guitar or bass speaker cabinet system. You can also place an external IR after a SansAmp to give additional flavor if you so desire. The SansAmp speaker sim is designed and individually tailored for a smooth, even response as would be achieved by a multiply-miked cabinet –without peaks, valleys, and notches associated with single miking and many IRs.
- While larger than our other SansAmp pedals, the Programmable Bass Driver DI still fits into a gig bag. Actual size: 7.25”L x 5.25”W x 2.25”H.
- Even with its roadworthy all-metal construction, each unit weighs in at a mere 25 oz.
- Operable via phantom power.
- Operable with 9V alkaline battery (not included).
- Optional DC power supply is available:
Third Man Plasma Coil Effects Pedal
$ 379.00 $ 490.00
The PLASMA Coil is a special version of the PLASMA Pedal, created by Gamechanger Audio and Third Man Records.
At its heart is GCA's innovative High Voltage Distortion technology that expresses audio signal as a series of electrical discharges. Even though they've been printing the words: "High Voltage Rock'n'Roll" on AC/DC t-shirts since 1973, PLASMA Distortion the is the first (and only) commercial musical device that literally amplifies audio signal to 3500 Volts.
PLASMA COIL takes High Voltage distortion to new heights by adding multiple Octaver-style cirquits, and an additional Effects footswitch that can be toggled as latching or momentary.
Another difference from the original PLASMA Pedal is the removed BLEND control - with PLASMA COIL the signal is always 100% PLASMA - take it or leave it.
FEATURES:
High Voltage PLASMA Distortion circuit - converts audio signal into a series of Electrical discharges at 3.5 kV.
ON/OFF switch - silent footswitch.
2 EQ Controls - lets you boost or cut LOW and HIGH frequencies.
Master VOLUME Knob - cuts or boosts the Output Signal level.
VOLTAGE Knob - adjusts the amount of electrical current sent to the PLASMA Tube.
EFFECT Knob - allows you to select 1 of 6 different Special EFFECT types:
- Volume Boost
- 2 Subharmonic modes (Bitcrush-style Octave Down)
- 1 Upper Harmonic mode (Octafuzz-style Octave Up)
- 2 Mixed modes (Upper and Lower harmonics combined)
EFFECT Footswitch - engages the PLASMa COIL's special effect cirquit.
Effect Footswitch TOGGLE - configure EFFECTS Footswitch as a latching ON/OFF switch or as a Momentary switch.
1 MONO input Jack
PLASMA Tube:
Xenon gas filling
Power Requirements -
Standard 9V DC pedal power supply with a center negative connector, 300 mA or higher.
(PLASMA COIL does not have a Battery slot)
Power supply:
Not included
1 year Warranty
Third Man Triple Threat Effects Pedal
Sold Out $ 158.00
Triple Threat starts with a wide-range high gain distortion, with volume, gain, and tone controls to create a threatening rock sound. A classic phaser upgraded from the Pearl Tremor pedal by Donner is next with extended mod controls. Third in line is an analog voiced echo, originated from Donner’s first ever pedal, the Yellow Fall Delay released in 2013, with warm analog tone and rich feedback.
With upgraded circuit design and tuning the tone to Jack’s specifications, Donner combined three analog circuits into one metal enclosure, delivering unique analog sounds and versatile utility for musicians on the go. Third Man Hardware designed the external appearance of The Triple Threat, adding its signature patterns such as lightning bolts from the Tesla tower on the panel, three sharp stripes in front and the signature diagrams from Third Man Hardware’s logo on both sides of the pedal.
Main Features
3-in-1 analog effect pedal
PHASER: DEPTH, RATE, LEVEL
DISTORTION: TONE, GAIN, VOL
ECHO: TIME, FEEDBACK, LEVEL
FOOTSWITCHES toggle effects on (yellow LED indicates on)
Bypass: Buffered bypass
Power Supply: 9 volts DC (Adapter included)
Tortuga Effects Limitied Edition Royal Manhattan Effects Pedal USED
$ 175.00
**This pedal is used and being sold on consignment. It is in good condition with some noticeable signs of wear. Comes with the original packaging. The price has been adjusted accordingly.
#10 out of 10#
Specs
| Brand |
|
|---|---|
| Model |
|
| Categories |
|
| Made In |
|
Voodoo Lab Dingbat Medium Pedalboard with Pedal Power 3 Power Supply
$ 429.99
DINGBAT MEDIUM is ideal for assembling a typical-size board with room for 6 to 10 effects. Installing Pedal Power® with the included mounting hardware is quick and easy using only a screwdriver. Dingbat Medium also features a dedicated position for a second Pedal Power that can be quickly installed with optional mounting brackets. Hook-and-loop tape is provided to attach pedals, as well as zip ties and 4-way tie mounts to secure cabling underneath.
ORGANIZE
A key element in executing a flawless performance is a clean, organized pedalboard, and Dingbat’s innovative patented design helps you set up your rig like a pro. All supplies needed for securing pedals and cabling to the board are included.
PROTECT
Dingbat MEDIUM includes a heavy-duty tour-grade soft case. Premium materials and construction ensure superior performance and long-lasting protection for your pedalboard. A removable shoulder strap and stowable backpack straps are included for easy transportation.
POWER
Dingbat Power Packages offer the convenience and added value of a factory-installed Voodoo Lab isolated power supply. Just add pedals and audio cables and you are ready to go. In addition to convenience, a factory-installed Pedal Power ensures any pedal will sound and perform its best. Even under poor AC line conditions, you can always count on Pedal Power to consistently deliver the cleanest most reliable power possible. Bundle-priced Power Package options for Dingbat MEDIUM include Pedal Power 2 PLUS, Pedal Power 3, or Pedal Power 3 PLUS.
Dingbat MEDIUM Features
- Innovative patented design
- Crafted from lightweight 6061-T6 aircraft-grade aluminum
- Pedalboard surface size: 22” x 13.25” (559 x 337mm)
- Mounting brackets included for easy Pedal Power installation
- Space for mounting up to two Pedal Power units below pedalboard
- Adhesive-backed hook-and-loop pedal mounting tape
- UV-resistant cable ties and 4-way tie mounts
- Professional tour-grade soft case with premium YKK zipper hardware, padded shoulder strap, and backpack straps
- Power Package options with factory-installed Pedal Power isolated power supply
- Power Package only: Includes cables for powering pedals
- Made in the U.S.A.
Dingbat MEDIUM Specifications
- Physical
- Dimensions: 22" x 13.25" x 2.75" (457 x 337 x 70mm)
- Weight: 4.4 lbs. (2kg)
- Soft Case
- Dimensions: 25” x 15.5” x 7” (635 x 394 x 178 mm)
- Weight: 3.45 lbs. (1.6kg)
- Power Package Options
- Pedal Power 2 PLUS (8 isolated outs)
- Pedal Power 3 (8 isolated outs + Expansion capability)
- Pedal Power 3 PLUS (12 isolated outs + Expansion capability)
- Warranty
- 5-year warranty in North America. Other regions contact your country's distributor for warranty details.
Voodoo Lab Pedal Power X4 Expander Kit
$ 99.99 $ 140.00
Pedal Power® X4 Expander Kit adds four isolated 9V DC outputs to compatible Voodoo Lab® power supplies. Its ultra-compact size makes adding on to your existing system quick and easy, mounting to the even most space-challenged pedalboards. The innovative hybrid DC transformer design of Pedal Power X4 combines exotic components, linear regulation, and computer-optimized filtering to establish industry-leading audiophile quality power that unveils the hidden sonic potential of your rig.
Pedal Power X4 Expander Kit Features
- Adds 4 isolated 9V DC outputs to compatible Pedal Power
- Powers directly from Pedal Power 3 X-LINK or any 12V out of 400mA or more
- Each output delivers up to 500mA
- Ultra-compact, lightweight design for easy mounting to any pedalboard
- Advanced filtering and linear regulation ensure noise-free audiophile-quality performance
- Delivers clean, consistent power even with poor AC line conditions
- Works with battery-operated and high current DSP effects
- Compatible with Pedal Power 3, ISO-5, Digital, 4X4, and MONDO
- Includes power cables and 3M™ Dual Lock™ for mounting
- Made in the U.S.A.
Specs
-
Input
-
2.1 mm barrel jack
-
Center-negative polarity
-
12V DC only
-
-
Output
-
5.5 × 2.1 mm barrel connectors
-
Center-negative
-
Short-circuit protected
-
-
Special Features
-
Hybrid DC transformer design
-
Can power from any 12V DC source (400–2000 mA)
-
-
Included Cables
-
2 × PPBAR-RS (18”)
-
2 × PPBAR-RS12 (12”)
-
1 × PPBAR (18”)
-
-
Physical
-
Dimensions: 3.38” × 2.75” × 1” (86 × 70 × 25 mm)
-
Weight: 4 oz (114 g)
-
-
Warranty
-
5-year warranty in North America
-
For other regions, contact your country’s distributor for warranty details.
-
Voodoo Lab Pedal Power X4 USED
$ 89.99
**This pedal is used and in excellent condition with little to no signs of wear. It comes with the original packing. The price has been adjusted accordingly.
Pedal Power X4 is a professional isolated power supply for both battery operated and high current DSP effects. Its ultra-compact size fits even the smallest pedalboards – including Voodoo Lab Dingbat TINY and Pedaltrain Nano – and operates at any mains voltage for international touring. X4's innovative hybrid DC transformer design incorporates exotic components, linear regulation, and computer optimized filtering to establish industry-leading audiophile quality power that unveils the hidden sonic potential of your rig.
As well as delivering the cleanest, most reliable power for small pedalboards, Pedal Power X4 shines as a supplementary power supply in an expanding rig. Powering directly from any 12V 400mA output or X-Link port, X4 adds four isolated outputs to an existing Pedal Power. X4 can also power from the AC courtesy outlet of a Pedal Power 2 PLUS, significantly upgrading both its isolated output capacity and high current capability.
Four isolated 9V outputs
Ultra-compact design easily mounts to the smallest pedalboards Powers battery operated and high current DSP effects Innovative DC transformer topology sets new standards in power supply performance Advanced filtering and linear regulation ensure noise-free audiophile-quality power Supplies a total of 1000mA using included AC adapter (500max per output) X4 also powers from any 12V 400mA Pedal Power output, supplying up to 400mA of current Includes Universal input voltage power adapter, power cables, and 3M Dual Lock for mounting 5-year warranty* Made in the U.S.A.
VooDoo Labs Sparkle Drive MOD Guitar Effects Pedal
$ 199.99 $ 260.00
All the tones of the original Sparkle Drive plus three custom mods for punchy and modern to thick, singing lead tones!
The Sparkle Drive MOD overdrive effects pedal from Voodoo Lab delivers all the overdriven sounds of the original Sparkle Drive but with a twist. Using the MOD switch, you can select the stock 808-based circuit or instantly pick from three custom mods. Whether you need more gain, tighter bass response, a more-vocal midrange, or a thick and juicy lead tone, Sparkle Drive MOD gives you the tools to get there.
In Stock mode, you get the classic tube-style midrange grind that's great for blues or for boosting your solos. Mod 1 is the Lead circuit with extra gain, a thick and juicy bottom end, and smooth highs that are perfect for single-note melodies. Mod 2 delivers punchy, mid-cut rhythm tones thata re great for chunky rock power chords and funk. Mod 3 gives you the high-gain treatment with articulate highs and an aggressive bottom end.
Additional features include a unique Clean control that allows you to blend in a boosted direct signal restoring attack and feel. Switching is true bypass via a high-reliability gold-contact relay.
Features
- Create multiple, layered amp sounds - one clean, one overdriven
- Four unique overdrive/distortion circuits: Stock, Lead, Rhythm & High Gain
- 100% clean boost circuit with tons of output
- True-bypass switching via gold-contact relay with LED
- Hand built in the USA
- 5-year warranty
Wampler Ratsbane Pedal
$ 149.97
Based on an infamous circuit from a classic 1980’s high gain distortion pedal, the Ratsbane is Brian’s answer to the countless requests he has received to build his interpretation of this much-loved design.
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2026 Huber Breese Music. Powered by Shopify
