Effects
Tech 21 SansAmp Para Driver V2 DI Pedal
$ 249.00 $ 335.00
This floor version of our RPM rackmount provides the same detailed tone shaping possibilities for any signal source. It is particularly useful with acoustic, electric and bass guitars, and upright bass, either direct to a mixing console or with an instrument amplifier. The Para Driver DI gives your instrument a natural warmth and presence, as if miking it through a tube pre-amp. The SansAmp circuitry eliminates the harsh, unnatural harmonics of piezo pickups, while the Drive control offers some tasteful edge — just a little or over-the-top.
Version 2 has exactly the same tonality and functionality with the addition of two new features: Rumble Filter and Air. The Rumble Filter removes unwanted sub-sonic frequencies that cause boominess and audible handling noises associated with acoustic guitars.The Air button adds top-end clarity and sparkle to acoustics.
PARA DRIVER DI
FEATURES
| Active tone controls with 12dB of cut or boost | |
| Sweepable semi-parametric EQ | |
| 1/4-inch 4.7 megOhm instrument level input | |
| 1/4-inch and XLR outputs with selectable levels | |
|
Parallel, uneffected output to run a dry signal to a separate channel |
Tech 21 SansAmp Programmable Bass Driver PBDR
$ 249.00 $ 398.00
Always thinking of our fat-stringed brethren, we had to make a 3-channel, programmable, rig-in-a-box for bassists who can’t get enough of a great thing. Like the TRI-A.C. for guitar, you get three hot tones right at your toetips. The all-analog circuitry features the same controls as its single channel predecessor: Drive, Bass, Treble, Presence, Blend and Level. Digital only in its programmability, you just tweak the knobs until you find a tone, double-tap on a footswitch, and it’s saved in that channel. It’s that simple. Three of your faves — to go!
- Build your Bass Driver DI into a live rig with a Bass Power Engine 60, and run through the PA for extra power.
- Boldly go live with just your Bass Driver DI straight into the PA.
- Bounce into any studio with a Programmable Bass Driver DI and plug directly into the board.
- BUILT-IN SPEAKER/CAB SIM: The 100% analog SansAmp Tube Amplifier Emulation technology encompasses the entire signal chain, from pre-amp to power amp to speaker simulation. An integral part of the circuitry, the SansAmp speaker simulation will complement any type of guitar or bass speaker cabinet system. You can also place an external IR after a SansAmp to give additional flavor if you so desire. The SansAmp speaker sim is designed and individually tailored for a smooth, even response as would be achieved by a multiply-miked cabinet –without peaks, valleys, and notches associated with single miking and many IRs.
- While larger than our other SansAmp pedals, the Programmable Bass Driver DI still fits into a gig bag. Actual size: 7.25”L x 5.25”W x 2.25”H.
- Even with its roadworthy all-metal construction, each unit weighs in at a mere 25 oz.
- Operable via phantom power.
- Operable with 9V alkaline battery (not included).
- Optional DC power supply is available:
Third Man Plasma Coil Effects Pedal
$ 379.00 $ 490.00
The PLASMA Coil is a special version of the PLASMA Pedal, created by Gamechanger Audio and Third Man Records.
At its heart is GCA's innovative High Voltage Distortion technology that expresses audio signal as a series of electrical discharges. Even though they've been printing the words: "High Voltage Rock'n'Roll" on AC/DC t-shirts since 1973, PLASMA Distortion the is the first (and only) commercial musical device that literally amplifies audio signal to 3500 Volts.
PLASMA COIL takes High Voltage distortion to new heights by adding multiple Octaver-style cirquits, and an additional Effects footswitch that can be toggled as latching or momentary.
Another difference from the original PLASMA Pedal is the removed BLEND control - with PLASMA COIL the signal is always 100% PLASMA - take it or leave it.
FEATURES:
High Voltage PLASMA Distortion circuit - converts audio signal into a series of Electrical discharges at 3.5 kV.
ON/OFF switch - silent footswitch.
2 EQ Controls - lets you boost or cut LOW and HIGH frequencies.
Master VOLUME Knob - cuts or boosts the Output Signal level.
VOLTAGE Knob - adjusts the amount of electrical current sent to the PLASMA Tube.
EFFECT Knob - allows you to select 1 of 6 different Special EFFECT types:
- Volume Boost
- 2 Subharmonic modes (Bitcrush-style Octave Down)
- 1 Upper Harmonic mode (Octafuzz-style Octave Up)
- 2 Mixed modes (Upper and Lower harmonics combined)
EFFECT Footswitch - engages the PLASMa COIL's special effect cirquit.
Effect Footswitch TOGGLE - configure EFFECTS Footswitch as a latching ON/OFF switch or as a Momentary switch.
1 MONO input Jack
PLASMA Tube:
Xenon gas filling
Power Requirements -
Standard 9V DC pedal power supply with a center negative connector, 300 mA or higher.
(PLASMA COIL does not have a Battery slot)
Power supply:
Not included
1 year Warranty
Third Man Triple Threat Effects Pedal
$ 99.00 $ 158.00
Triple Threat starts with a wide-range high gain distortion, with volume, gain, and tone controls to create a threatening rock sound. A classic phaser upgraded from the Pearl Tremor pedal by Donner is next with extended mod controls. Third in line is an analog voiced echo, originated from Donner’s first ever pedal, the Yellow Fall Delay released in 2013, with warm analog tone and rich feedback.
With upgraded circuit design and tuning the tone to Jack’s specifications, Donner combined three analog circuits into one metal enclosure, delivering unique analog sounds and versatile utility for musicians on the go. Third Man Hardware designed the external appearance of The Triple Threat, adding its signature patterns such as lightning bolts from the Tesla tower on the panel, three sharp stripes in front and the signature diagrams from Third Man Hardware’s logo on both sides of the pedal.
Main Features
3-in-1 analog effect pedal
PHASER: DEPTH, RATE, LEVEL
DISTORTION: TONE, GAIN, VOL
ECHO: TIME, FEEDBACK, LEVEL
FOOTSWITCHES toggle effects on (yellow LED indicates on)
Bypass: Buffered bypass
Power Supply: 9 volts DC (Adapter included)
Third Man Triplegraph Pedal - Black
Sold Out $ 640.00
Coppersound Pedals + Jack White Present:
Third Man Triplegraph
A new, state of the art digital octave pedal
The Triplegraph is a digital octave pedal designed by CopperSound Pedals and Jack White, featuring three proprietary telegraph keys and an integrated auxiliary loop. Utilizing a high-power DSP Blackfin Processor, Triplegraph triggers an octave down with the left key, octave up with the right key, while the middle key activates a killswitch or auxiliary loop. In KILL mode, the middle key acts as a momentary killswitch, allowing the player to remove their dry signal and attain a fully wet octave up and/or down when used in conjunction with the octave keys. In AUXILIARY mode, the player can connect one or more of their favorite effects in parallel with the octaves via the send/return jacks, and trigger them in momentary bursts. The high and low octaves can be triggered in parallel with the dry signal when the octave keys are pressed independently. The octaves themselves track seamlessly with zero latency, and can be triggered in latching or momentary modes, using our "Loctave" toggle switches. The telegraph keys themselves are composed of custom stainless steel and aluminum components, making them indestructible and exceedingly durable for both hand and foot operation. Over four years in the making, the collaborative result is an innovative, state of the art clean-tracking octave pedal, capable of standing its own against industry standards.
Limited & Standard Edition Bundles
There are two special bundles available for Triplegraph. The Limited Edition model comes with an exclusive Yellow finish, black and white print, a custom steel machined serial badge plate, a Certificate of Authenticity signed by Jack himself, and a custom designed book, all elegantly packed in a special edition box. There are only 100 Limited Edition units available, and all of the Standard Editions are finished in a sharp, matte black finish with yellow and white print, packed in a standard box. Both models come with a custom designed 130+ page book that documents the entire process; spanning over four years of prototyping, engineering, building, road testing, and stories from this exciting collaboration, all designed and photographed by CopperSound.
Tech Specs:
Power Consumption:
Standard 9V (2.1mm x 5.5mm) center negative power supply. Triplegraph requires at least 250mA of available current and has internal polarity protection. If power is lost, Triplegraph will automatically revert to bypass, allowing unaffected audio to still pass through. Please not under power this device.
In/Out & Send/Return Jacks:
Standard 1/4-inch Instrument Cables
VooDoo Labs Sparkle Drive MOD Guitar Effects Pedal
$ 199.99 $ 260.00
All the tones of the original Sparkle Drive plus three custom mods for punchy and modern to thick, singing lead tones!
The Sparkle Drive MOD overdrive effects pedal from Voodoo Lab delivers all the overdriven sounds of the original Sparkle Drive but with a twist. Using the MOD switch, you can select the stock 808-based circuit or instantly pick from three custom mods. Whether you need more gain, tighter bass response, a more-vocal midrange, or a thick and juicy lead tone, Sparkle Drive MOD gives you the tools to get there.
In Stock mode, you get the classic tube-style midrange grind that's great for blues or for boosting your solos. Mod 1 is the Lead circuit with extra gain, a thick and juicy bottom end, and smooth highs that are perfect for single-note melodies. Mod 2 delivers punchy, mid-cut rhythm tones thata re great for chunky rock power chords and funk. Mod 3 gives you the high-gain treatment with articulate highs and an aggressive bottom end.
Additional features include a unique Clean control that allows you to blend in a boosted direct signal restoring attack and feel. Switching is true bypass via a high-reliability gold-contact relay.
Features
- Create multiple, layered amp sounds - one clean, one overdriven
- Four unique overdrive/distortion circuits: Stock, Lead, Rhythm & High Gain
- 100% clean boost circuit with tons of output
- True-bypass switching via gold-contact relay with LED
- Hand built in the USA
- 5-year warranty
Vox V845 Classic Wah Wah Pedal
Sold Out
**This pedal is used and being sold on consignment. It is in excellent condition with little to no signs of wear. Comes in the original packaging. The price has been adjusted accordingly.
Specs
| Brand |
|
| Model |
|
| Finish |
|
| Categories |
|
| Pedal Format |
|
Wampler Ratsbane Pedal
$ 149.97
Based on an infamous circuit from a classic 1980’s high gain distortion pedal, the Ratsbane is Brian’s answer to the countless requests he has received to build his interpretation of this much-loved design.
Washburn 1980s A-AD9 Analog Delay USED
$ 199.00
**This pedal is used and being sold on consignment. It is in good condition with some signs of wear. The price has been adjusted accordingly.
Specs
Yamaha FC3A Continuous Piano Style Sustain Pedal
$ 39.99 $ 70.00
Achieve Great Control of Your Keyboard!
The Yamaha FC3A is a piano-style damper pedal for use with Yamaha keyboards that support half-damper positions. Instead of a typical on/off type pedal the half-damper feature allows you to fine tune your sustain by varying the pressure on the pedal,, giving you great control of your performance much like an acoustic piano. A robust design with a 6-foot cable and a 1/4" plug assures the FC3A will be a long lasting addition to your keyboard rig. Get more command out of your Yamaha keyboard with the FC3A keyboard pedal.
Yamaha FC3A Half-damper Pedal Features:
- Keyboard pedal that works with all half-damper enabled Yamaha keyboards
- Half-damper function for nuanced performance
- Rubber underside prevents slipping
- 1/4" plug for input to your keyboard
- 6' cable
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2025 Huber Breese Music. Powered by Shopify
