$ 89.95
A level-adjustable A/B pedal. A built-in DI output with ground-lift. A boost pedal. An output Y-splitter. A two-channel mixer. The AFX Pocket Blender is the ultimateA/B/Y pedal combining four essential tools:
Balanced D.I. Output with Ground Lift
Innovative Dual Path Routing
Super Compact Design Fits Almost Anywhere
Without even touching the A/B features, it’s a mini two-channel mixer allowing you to connect two audio sources and blend them together. This is perfect for dual-source systems such as Fishman soundhole pickups that feature a mic or body pickup.
Build on the simple blender by setting up an “A mix” and a “B mix” where pressing the footswitch toggles between one mix and the other. You could balance your onboard pickup (50%) with your onboard mic (50%) on mix A. Then on mix B, which you use to take solos, you could boost the pickup to 75% while leaving the mic on 50%. All with a single stomp of the footswitch.
And it’s not only an A/B pedal with a mixer, it is the heart of Fishman’s unique AFX Dual Path ecosystem. By using common TRS audio cables, you assign effects on either tip or ring signal paths and essentially switch between two ‘scenes,’ each with mix levels you control.
MODEL NUMBER |
PRO-AFX-DI2 |
AUDIO I/O |
1/4" TRS input and outputs, 1/4" balanced DI output with ground lift |
DSP |
N/A (all analog) |
DIMENSIONS |
1.9" W x 3.8" D x 1.92" H (49mm W x 97mm D x 49mm H) |
MATERIAL |
Durable aluminum enclosure |
CURRENT DRAW |
53mA, typical |
POWER |
910-R AC Adapter (sold separately) or suitable filtered and regulated 5.5mm OD, 2.1mm ID Barrel Connector, Center = negative |
$ 119.95
Based on the highly-regarded Fishman Platinum series of instrument preamps, AFX Pro EQ Mini offers quality preamplification and critical equalization voiced specifically for acoustic instruments.
5-Band EQ Specially Voiced for Acoustic Instruments
True Bypass with Options for Buffered Bypass or Mute
Feedback-Fighting Phase Control
Innovative Dual Path Routing
Super Compact Design Fits Almost Anywhere
9V External Power Required (sold separately)
This is no off-the-shelf graphic EQ – plug in and your signal begins with a high-impedance instrument preamp to condition nearly any passive or active pickup.
Then, use the four bands of acoustic tone control
to sculpt your bass, mids, treble, and brilliance. A sweepable Low Cut fine-tunes the very low frequencies to reduce or enhance thumps and subs.
Finally, hold the footswitch to toggle your output polarity. Also known as “phase,” this simple circuit can tame low-frequency howl very effectively.
MODEL NUMBER |
PRO-AFX-EQ2 |
AUDIO I/O |
1/4" TRS input and output (TRS enables Dual Path Functionality) |
DSP |
32-bit processing |
DIMENSIONS |
1.9" W x 3.8" D x 1.92" H (49mm W x 97mm D x 49mm H) |
MATERIAL |
Durable aluminum enclosure |
CURRENT DRAW |
53mA, typical |
POWER |
910-R AC Adapter (sold separately) or suitable filtered and regulated 5.5mm OD, 2.1mm ID Barrel Connector, Center = negative |
ANALOG SIGNAL PATH |
Input impedance: 10M Ohm | Output impedance: 1k Ohm | Signal-to-noise: -100dB | Dynamic range: 100dB |
DIGITAL SIGNAL PATH |
A/D, D/A conversion: 24-bit | Signal processing: 32-bit |
$ 119.95
AFX Broken Record packs high-quality audio looping and sampling into a tiny, yet deceptively-simple stompbox package. It features intuitive one-button operation, endless overdub capability and offers easy transfer to a computer.
Drag ’n Drop WAV File Transfer via USB
True Bypass with Buffered Bypass Option
24-bit / 44.1kHz Recording Quality
Innovative Dual Path Routing
Super Compact Design Fits Almost Anywhere
9V External Power Required (sold separately)
A single footswitch is all it takes to record, overdub, and play along with your coolest riffs and patterns.
Featuring high-quality 24-bit, 44.1kHz audio recording of up to 6 minutes, AFX Broken Record let’s you capture cool ideas and build on them, or even play along with pre-recorded audio you transfer from your computer.
Built-in memory will retain what you recorded even after the power is disconnected. So, you can unplug at your gig and transfer your loop to your computer later. This also means that the backing track you transfer from your computer will be ready and waiting for you to play back at your next performance.
MODEL NUMBER |
PRO-AFX-LP2 |
AUDIO I/O |
1/4" TRS input and output (TRS enables Dual Path Functionality) |
DSP |
32-bit processing |
BYPASS |
True Bypass with Buffered Bypass Option |
DIMENSIONS |
1.9” W x 3.8” D x 1.92” H (49mm W x 97mm D x 49mm H) |
MATERIAL |
Durable aluminum enclosure |
CURRENT DRAW |
53mA, typical |
POWER |
910-R AC Adapter (sold separately) or suitable filtered and regulated 5.5mm OD, 2.1mm ID Barrel Connector, Center = negative |
ANALOG SIGNAL PATH |
Input impedance: 10M Ohm | Output impedance: 1k Ohm | Signal-to-noise: -100dB | Dynamic range: 100dB |
DIGITAL SIGNAL PATH |
A/D, D/A conversion: 24-bit | Signal processing: 32-bit |
$ 199.99
**This preamp is used and in good condition. Little no signs of wear can be found on this product. Does not come with the 9 volt power adapter. The price has been adjusted accordingly.
The ToneDEQ Preamp EQ Multi-effects is a complete performance solution for the acoustic musician. With a high-quality preamp, dual effects section, tone controls, a compressor, level booster and a balanced D.I. — it’s got everything you need in one box.
Pure Analog Circuitry
The ToneDEQ analog signal path goes from end to end — from preamp to output — to give acoustic musicians a richer tonal quality. Even the digital effects are mixed in parallel so they don’t affect the purity of your acoustic instrument.
Multi-effects
The ToneDEQ offers two separate effects sections: “reverb/delay” with 2 reverbs, 2 delays, time and level controls, and “chorus” with 2 chorus settings, one flanger, and one tremelo. There is also an onboard compressor.
Fully Balanced Stage D.I.
Flexible outputs include a 1/4″ amplifier output and XLR D.I. output for the lowest noise possible. Plus the D.I. features automatic ground-lifting and selectable pre/post EQ settings.
Discrete Class-A Preamp
With Fishman, you get quality discrete class-A signal conditioning created by the leader in instrument preamp design. The high-impedance input is a must when using a passive instrument pickup.
Advanced 4-Band EQ
Legendary 4-band equalizer design provides superior tone control for any acoustic instrument. The variable low-cut filter controls sub-bass effects produced by some passive pickups.
INPUT: |
10M Ohm, discrete class-A JFET design |
AUDIO: |
All-analog signal path with parallel digital effects |
TONE CONTROL: |
4-band EQ with Bass, Middle, Treble, and selectable Low Cut |
DUAL EFFECTS: |
Reverb (2) or Delay (2), Chorus (2), Flanger or Tremolo |
DYNAMICS: |
Soft-knee Compressor, Boost footswitch (up to 9dB) |
FEEDBACK CONTROL: |
Selectable Phase invert |
AUDIO I/O: |
1/4” mono instrument input, 1/4” amplifier output, balanced XLR D.I. output with pre/post routing |
DIMENSIONS: |
5.36” L x 9.5” W x 2.2” H (136 mm) (241 mm) (56 mm) |
WEIGHT: |
2.5 lbs (1.1 kg) |
BATTERY |
Powered by 9-volt battery (not included), or Fishman 910-R power adapter (optional) BATTERY LIFE 12 hours |