Roland DP-2 Damper Pedal Switch
$ 19.99 $ 24.99
Related Items
ART USB Phono Plus Audiophile Computer Interface
$ 79.99 $ 129.99
The USB Phono Plus from ART is the ideal solution for transferring your highly prized vinyl collection to your computer or laptop, and also works great as an audio interface between analog and digital sources. The built in low-noise RIAA phono pre-amp circuit features low cut filters (to remove rumble and noise) that will help achieve clean transfers.
Front-mounted gain control and Signal/Clip LED allows easy optimization of a wide range of analog input sources. The USB Monitor/headphone provides zero latency monitoring of the input source for easy cueing. The USB Phono Plus can also act as audio playback source for any USB equipped computer or laptop. Optical TOSLINK input and output as well as an S/PDIF input make the USB Phono Plus an ideal analog / digital audio to USB interface as well.
Housed in an all aluminum black anodized case, the USB Phono Plus can be powered by either external power supply or directly via USB port. To ensure maximum versatility, the USB Phono Plus is fully compliant with the USB 2.0 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with Windows 98SE/ME/2000/XP/Vista/7 USB audio device drivers as well as Apple OS9.1/OS-X computers with native USB support.
- Easily transfer audio from your vinyl records to your laptop or computer
- Also functions as an audio interface between analog and digital sources
- Front mounted gain control and Signal/Clip LED
SPECIFICATIONS
USB Phono Plus Project Series
- Frequency Response: 10Hz - 50kHz
- THD: <0.01% typical @ 1kHz
- Hum and Noise: >90 dB below clipping
- Input Impedance: 47k Ohms/100pf (phono), 270k Ohms (line)
- Maximum Input Level: 40 mV rms @ 1 kHz (phono), +19dBu (line)
- Maximum Gain: 45dB @ 1 kHz (phono), 6dB (line)
- Analog Input Connections: RCA (preamp / phono/line output)
- Analog Output Connection: RCA (preamp line output) 1/8" (monitor/headphone output)
- Maximum Output Level: +6dBu (1.4V rms)
- Filter Type / Response: Switchable, high pass (low cut) -3dB @ 22Hz
- A/D-D/A: 16-bit, 44.1kHz or 48kHz, USB selectable from computer 0.4 ms A/D latency @ 44.1kHz
- Digital Audio Interface: TOSLINK Opto In to USB, TOSLINK Opto Out from USB, S/PDIF coax (RCA) In to USB
- Computer Interface: USB 2.0 compliant
- Chassis Type: All aluminum black anodized with integral rubber sides
- Power Requirements: USB bus powered or 7-12V DC or 9-12V AC @ 150mA (external) Either polarity of the tip will work with DC power
- Dimensions: 1.85 x 4.6 x 4.5 (in)
- Weight: 1.35 lb
Audio-Technica ATH-M30x Professional Monitor Headphones
$ 69.99 $ 99.99
The M-Series ATH-M30x professional monitor headphones combine modern engineering and high-quality materials to deliver a comfortable listening experience, with enhanced audio clarity and sound isolation. Tuned for highly detailed audio, with strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
| Type | Closed-back dynamic |
| Driver Diameter | 40 mm |
| Magnet | Neodymium |
| Voice Coil | Copper-clad aluminum wire |
| Frequency Response | 15 - 22,000 Hz |
| Maximum Input Power | 1,300 mW at 1 kHz |
| Sensitivity | 96 dB |
| Impedance | 47 ohms |
| Weight | 220 g (7.8 oz), without cable and connector |
| Cable | 3.0 m (9.8'), straight, left-side exit |
| Accessories Included | Protective carrying pouch, 6.3 mm (1/4") screw-on adapter |
CAD AS22 Acoustic-Shield 22 Acoustic Enclosure
$ 89.99 $ 119.99
The CAD Acousti-Shield 22 is a foldable stand-mounted acoustic enclosure microphone shield. It is designed to minimize room-ambience reflections and outside noise leakage during vocal and instrument recordings and live performances when using "open," "live" microphones. Its 16-gauge perforated stainless steel mated to 53 mm high-density micro-cell acoustic foam helps reduce and control unwanted acoustic room reflections and echo, and attenuate unwanted environmental acoustic interference in professional and project studio environments.
The AS22 mounts to any 5/8" 27-thread tabletop, floor or full-size mic stand. The AS22 includes a microphone-bracket parts and assembly pack which also includes a 5/8" to 3/8" European mic-stand adapter. Microphone and stand not included and must be purchased separately.
- Constructed of 16-gauge perforated stainless steel
- High-density 53 mm micro-cell acoustic foam
- Reduces room reflections and echo, and attenuates unwanted environmental acoustic interference.
- Flexible positioning accommodates a variety of microphone designs and allows for creative control and a tailored acoustic result
- Portable design allows for simplified placement for fixed or remote recording and micing
CAD AS32 Acoustic-Shield 32 Stand Mounted Acoustic Enclosure
$ 129.99 $ 169.99
The Acousti-shield 32 is constructed from a high quality 16 gauge perforated stainless steel shield mated to 53mm high density micro cell acoustic foam, resulting in a dry recording environment. The AS32 reduces reflections, echo and attenuates unwanted environmental acoustic interference. An innovative advanced mounting design allows for a maximum positioning stability even when mated to an economy mic stand. Innovative microphone positioning flexibility accommodates a variety of microphone designs and allows for creative control and a tailored acoustic result. The portable design allows for easy studio placement and simplifies remote recording.
The Acousti-shield 32 was developed as an effective accessory for the home recording
professional. When effectively utilized, it can substantially reduce unwanted reflections,
echo flutter and unwanted environmental acoustic interference. A trouble-free design results
in an easy to use, highly flexible device, while not sacrificing stand mounted stability. The
AS32 is constructed from high quality stainless steel and high density micro cell acoustic foam.
The AS32 is supplied with mounting hardware to adapt to most microphones for easy, flexible
placement. The AS32 is an essential tool for enhanced performance and a vital accessory
for the professional musician.
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2017 Huber Breese Music. Powered by Shopify
