Products
Audio-Technica 2000 Series ATW-2110a Wireless System
$ 329.99 $ 429.99
The Audio-Technica ATW-2110a Wireless UHF Body-Pack Microphone System bridges the gap between affordable wireless technology and professional level quality. The system operates on UHF frequencies over the 487.125 to 506.500 MHz band, and includes the ATW-T210 UniPak body-pack transmitter and ATW-R2100 diversity UHF receiver.
The ATW-R2100 receiver features True Diversity operation which selects between two receiver sections, reducing dropouts and radio frequency interference. The receiver features 10 user selectable UHF frequencies, allowing 10 systems to be used simultaneously. Single touch frequency scanning automatically selects clear frequencies in the area. The rear panel features a balanced XLR output and unbalanced 1/4" phone connection. A back-lit LCD provides channel, AF, RF and diversity status information.
The ATW-T210 UniPak transmitter is a lightweight body pack microphone transmitter that operates on the same frequencies as the receiver. The transmitter features a 4-pin Hirose connection input that is compatible with Audio-Technica "CW" lavaliers and head worn microphones, and select instrument cables. The transmitter operates up to 9 hours on two 1.5V AA batteries.
- Serious advances in affordable professional wireless
- Clear sound quality and rock-solid, dependable performance
- Automatic frequency scanning
- 10 compatible user-switchable channels in one of two UHF frequency ranges
- Antenna power available for powered antennas & other in-line RF devices
- True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
- Tone Lock tone squelch system fights interference
- Rugged metal half-rack receiver with soft-touch controls and LCD display
- Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
- Switchable transmitter power output with high and low settings offered
- Includes rack-mount kit and detachable UHF antennas
- Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
- ATW-T220a Handheld Microphone/Transmitter features PRO 41 Capsule for maximum feedback rejection and consistent sound
Audio-Technica AT2010 Handheld Condenser Vocal Microphone
$ 119.00 $ 166.00
The Audio-Technica AT2010 microphone is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 mic excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.
This breakthrough handheld vocal condenser delivers remarkable specs and superior build at an amazing price. State-of-the-art design and manufacturing techniques ensure compliance with Audio-Technica's stringent consistency and reliability standards, and set the AT2010 apart from other vocal mics in its class. The microphone offers a wide dynamic range and handles high SPLs with ease. Its rugged construction is designed to stand up to years of use.
Requires phantom power.
AT2010 Handheld Condenser Microphone
- Polar pattern: Cardioid
- Frequency response: 40-20,000 Hz
- Open circuit sensitivity:
- â48 dB (3.9 mv) re 1V at 1 Pa
- Impedance: 100 ohms
- Maximum input sound level: 136 db SPL, 1 khz at 1% T.H.D.
- Dynamic range (typical): 113 db, 1 khz at Max SPL
- Signal-to-noise ratio:71 db, 1 khz at 1 Pa
- Phantom power requirements: 48V DC, 2 ma typical
- Weight: 233 g (8.2 oz)
- Dimensions: 179.1 mm (7.05") long,
- 50.8 mm (2.00") maximum body diameter
- Output connector: Integral 3-pin XLRM-type
- Accessories furnished: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio-Technica AT2020 Cardioid Condenser Microphone
$ 99.00 $ 169.00
The Audio-Technica AT2020 Cardioid Condenser Microphone is the ideal mic for project and home studio applications. With a remarkably low price, cardioid pattern, and specs that put it in the big leagues, it features a custom-engineered, 16mm low-mass diaphragm and smooth 20Hz-20kHz frequency response. The AT2020's low self-noise is suited to digital recording, plus it has a high 144dB SPL handling.
Requires phantom power.
- Condenser
- Cardioid pattern
- Side address
- 16mm low-mass diaphragm
- 20Hz-20kHz frequency response
- 144dB SPL handling
- Rugged body
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar pattern: Cardioid
- Frequency response: 20-20,000Hz
- Open circuit sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
- Impedance: 100 ohms
- Maximum input sound level: 144dB SPL, 1kHz at 1% THD
- Noise: 20dB SPL
- Dynamic range (typical): 124dB, 1kHz at Max SPL
- Signal-to-noise ratio: 74dB, 1kHz at 1 Pa
- Phantom power requirements: 48V DC, 2 mA typical
- Weight: 12.1 oz.
- Dimensions: 6-1/3" long, 2" diameter
- Output connector: 3-pin XLRM-type
- Included accessories: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica case style: R7
Audio-Technica AT2020USB-X Cardioid Condenser USB Microphone
$ 149.00
AT2020USB-X
Audio-Technica AT2035 Cardioid Condenser Microphone
Sold Out $ 219.02
The Audio Technica AT2035 is a large diaphragm cardioid condenser microphone designed for critical home, project, professional studio applications, and live performance. This side-address cardioid studio condenser mic delivers exceptional detail and low noise. Equipped with a switchable 80Hz high-pass filter and 10dB pad, the AT2035 microphone handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the Audio-Technica AT2035 is a microphone that provides an exceptional level of consistency from model to model. Audio-Technica equips the AT2035 mic with a protective pouch and a custom shock mount.
- Element: Fixed-Charge Back Plate, Permanently Polarized Condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
- Open Circuit Sensitivity: -33 dB (22.4 Mv) Re 1v At 1 Pa
- Impedance: 120 Ohms
- Maximum Input Sound Level: 148 dB SPL, 1 Khz At 1% T.H.D.; 158 dB SPL, With 10 dB Pad (Nominal)
- Noise: 12 dB SPL
- Dynamic Range (Typical): 136 dB, 1 KHz At Max SPL
- Signal-To-Noise Ratio: 82 dB, 1 KHz At 1 Pa
- Phantom Power Requirements: 11-52v DC, 3.8 Ma Typical
- Switches: Flat, Roll-Off; 10 dB Pad (Nominal)
- Weight: 403 G (14.2 Oz)
- Dimensions: 170.0 mm (6.69") Long, 52.0 mm (2.05") Maximum Body Diameter
- Output Connector: Integral 3-Pin XLRM-Type
- Accessories Furnished: AT8458 Shock Mount For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch
- Audio-Technica Case Style: R5
Audio-Technica AT2040USB Hypercardioid Dynamic USB Microphone
$ 149.00
The AT2040USB is an ideal microphone for creators, featuring a dynamic design for excellent voice capture with added USB functionality. Combining the broadcast-quality performance of the AT2040 dynamic podcast microphone with plug-and-play USB functionality makes this the ideal microphone for podcasters, streamers, and other content creators to achieve professional results.
Audio-Technica AT2050 Multi-Pattern Condensor Microphone
$ 249.00
The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.
Features
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Switchable 80 Hz high-pass filter and 10 dB pad
- Large diaphragm for smooth, natural sound and low noise
- State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
- Includes shock mount & protective pouch
Specifications
| Microphones | |
|---|---|
| Element | Externally-polarized (DC bias) condenser |
| Polar Pattern | Cardioid, Omnidirectional, Figure-of-Eight |
| Frequency Response | 20-20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity | –42 dB (7.9 mV) re 1V at 1 Pa |
Audio-Technica AT899cW Subminiature Omnidirectional Condenser Microphone
$ 199.00
Audio-Technica’s omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping.
- Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
- Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
- Operates on battery or phantom power
- All wireless models available in either low-reflectance black or beige
- Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
- Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
- 9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Omnidirectional |
| FREQUENCY RESPONSE | 20-20,000 Hz |
| LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY | Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa |
| IMPEDANCE | Phantom: 200 ohms Battery: 250 ohms |
| MAXIMUM INPUT SOUND LEVEL | Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. Battery: 116 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | Phantom: 108 dB, 1 kHz at Max SPL Battery: 86 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 64 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 2 mA typical |
| BATTERY TYPE | 1.5V AA/UM3 |
| BATTERY CURRENT / LIFE | 0.4 mA / 1200 hours typical (alkaline) |
| SWITCH | Flat, roll-off (recessed) |
| WEIGHT (MICROPHONE) | 0.02 oz (0.5 g) |
| WEIGHT (POWER MODULE) | 3.6 oz (102 g) |
| DIMENSIONS (MICROPHONE) | 0.63" (16.0 mm) long, 0.20" (5.0 mm) diameter |
| DIMENSIONS (POWER MODULE) | 5.71" (145.0 mm) long, 0.83" (21.0 mm) diameter |
| OUTPUT CONNECTOR (POWER MODULE) | Integral 3-pin XLRM-type |
| CABLE | 9.8' (3.0 m) long (permanently attached to microphone), 0.08" (2.0 mm) diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module |
| ACCESSORIES FURNISHED | AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery; protective carrying case |
| AUDIO-TECHNICA CASE STYLE | M29 |
Audio-Technica ATH-M20x Professional Monitor Headphones
$ 49.00 $ 69.00
The ATH-Mx Series headphones are a reliable source for monitoring in home and professional studio environments. Because of the increased demand due to the popularity of the ATH-M50, Audio-Technica refreshed the entire line of these closed-back studio headphones for a redesigned feel. The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation
- Convenient single-side cable exit
- Designed for studio tracking and mixing
Audio-Technica ATH-M20xBT Wireless Over-Ear Headphones
$ 79.00
The ATH-M20xBT over-ear wireless headphones include all the features you want and the audio quality you demand. Inspired by our #1 selling ATH-M20x wired professional studio headphones and featuring powerful 40 mm drivers for enhanced low-frequency performance, the ATH-M20xBT Bluetooth headphones deliver an incredible listening experience with full-range, high-fidelity audio and enhanced bass.
Audio-Technica ATH-M30x Professional Monitor Headphones
$ 79.00 $ 110.60
The M-Series ATH-M30x professional monitor headphones combine modern engineering and high-quality materials to deliver a comfortable listening experience, with enhanced audio clarity and sound isolation. Tuned for highly detailed audio, with strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
| Type | Closed-back dynamic |
| Driver Diameter | 40 mm |
| Magnet | Neodymium |
| Voice Coil | Copper-clad aluminum wire |
| Frequency Response | 15 - 22,000 Hz |
| Maximum Input Power | 1,300 mW at 1 kHz |
| Sensitivity | 96 dB |
| Impedance | 47 ohms |
| Weight | 220 g (7.8 oz), without cable and connector |
| Cable | 3.0 m (9.8'), straight, left-side exit |
| Accessories Included | Protective carrying pouch, 6.3 mm (1/4") screw-on adapter |
Audio-Technica ATH-M40x Professional Monitor Headphones
$ 99.00 $ 146.00
The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
| Type | Closed-back dynamic |
| Driver Diameter | 40 mm |
| Magnet | Neodymium |
| Voice Coil | CCAW (Copper-clad aluminum wire) |
| Frequency Response | 15 - 24,000 Hz |
| Maximum Input Power | 1,600 mW at 1 kHz |
| Sensitivity | 98 dB |
| Impedance | 35 ohms |
| Weight | 240 g (8.5 oz), without cable and connector |
| Cable | Includes two interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and detachable 3.0 m (9.8') straight cable |
| Accessories Included | Protective carrying pouch, 6.3 mm (1/4") screw-on adapter |
Audio-Technica ATH-M50x Professional Monitor Headphones
$ 149.00 $ 239.99
As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50x professional monitor headphones feature the same coveted sonic signature, with the added feature of detachable cables. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.
Also available in white (ATH-M50xWH) and limited edition dark green (ATH-M50xDG).
More About the M-Series Headphones
Critically acclaimed M-Series professional monitor headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done. Hour after hour, year after year.
| Type | Closed-back dynamic |
| Driver Diameter | 45 mm |
| Magnet | Neodymium |
| Voice Coil | CCAW (Copper-clad aluminum wire) |
| Frequency Response | 15 - 28,000 Hz |
| Maximum Input Power | 1,600 mW at 1 kHz |
| Sensitivity | 99 dB |
| Impedance | 38 ohms |
| Weight | 285 g (10 oz), without cable and connector |
| Cable | Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable |
| Accessories Included | Protective carrying pouch, 6.3 mm (1/4") screw-on adapter |
Audio-Technica ATM230 Dynamic Instrument Microphone
$ 139.00 $ 249.00
The ATM230 hypercardioid instrument microphone brings a compact drum model to Audio-Technica’s popular Artist Series line. The mic’s proprietary capsule is designed to excel in high SPL applications, delivering full, well-rounded audio with an exceptional low-end. The hypercardioid polar pattern keeps the focus on the sound source, directionality that is aided by the mic’s low-profile design, which allows it to be placed in a wide variety of setups. All this makes the ATM230 ideally suited for miking toms, snare and other percussion instruments.
The ATM230 features rugged metal construction that stands up to the rigors of live and studio applications, and comes with an AT8665 drum mount and a protective pouch.
- Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Handles very high SPL at close range
- Big, warm low-frequency response with excellent attack
- Low-profile design permits versatile placement around drum kit
- Rugged, all-metal design and construction for years of trouble-free use
- Includes AT8665 drum mount and a soft protective pouch
| ELEMENT | Dynamic |
| POLAR PATTERN | Hypercardioid |
| FREQUENCY RESPONSE | 30-12,000 Hz |
| OPEN CIRCUIT SENSITIVITY | –54 dB (1.9 mV) re 1V at 1 Pa |
| IMPEDANCE | 600 ohms |
| WEIGHT | 292 g (10.3 oz) |
| DIMENSIONS | 82.5 mm (3.2") long, 38.0 mm (1.5") maximum diameter |
| OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
| ACCESSORIES FURNISHED | AT8665 drum mount for 5/8"-27 threaded adaptor; 5/8"-27 to 3/8"-16 threaded adaptor; soft protective pouch |
| AUDIO-TECHNICA CASE STYLE | R2 |
Audio-Technica ATM350U Cardioid Condenser Instrument Microphone with Universal Clip-on Mounting System (5" Gooseneck)
$ 299.00 $ 440.16
Designed for use with brass, saxophone and other instruments, the ATM350U UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument.
Audio-Technica ATM510 Handheld Vocal Microphone
$ 99.99 $ 179.99
Equipped with newly designed internal shock mounting for reduced handling and stage noise, the ATM510 from Audio-Technica is designed for smooth, natural vocal reproduction and low noise. This cardioid dynamic workhorse features super-durable construction for long-lasting performance, a rare-earth magnet for high output, and a multi-stage grille design for excellent protection against plosives. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, maximizing isolation from other sound sources and minimizing feedback. The ATM510 is enclosed in a rugged housing, and its multi-stage windscreen effectively controls popping, distortion from sibilant sounds and wind noise. The included AT8470 Quiet-FlexTM stand clamp permits mounting on any microphone stand with 5/8"-27 threads.
ATM510 Cardioid Dynamic Vocal Mic Featuring Advanced Internal Shock Mounting
- Element: Dynamic
- Polar Pattern: Cardioid
- Frequency Response: 90Hz-16kHz
- Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
- Impedance: 300 ohms
- Weight: .57 lb. (9.1 oz.)
- Dimensions: 6-11/16" (170mm) long; 2-1/8" (53.7mm) diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- Audio-Technica Case Style: T6
Audio-Technica ATM650 Hypercardioid Dynamic Instrument Microphone
$ 99.99 $ 169.99
The ATM650 is a versatile addition to the Artist Series featuring a new multi-stage flat grille design for precise positioning close to the sound source. Equipped with a neodymium magnet for high-output performance, the ATM650 has a frequency response tailored for clear sound reproduction of guitar cabinets, snare and percussion. A-T's innovative dual-wall floating construction banishes handling noise.
ATM650 Hypercardioid Dynamic Instrument Microphone
- ELEMENT: Dynamic
- POLAR PATTERN: Hypercardioid
- FREQUENCY RESPONSE: 80-17,000 Hz
- OPEN CIRCUIT SENSITIVITY: —56 dB (1.5 mV) re 1V at 1 Pa
- IMPEDANCE: 300 ohms
- WEIGHT: 279 g (9.8 oz)
- DIMENSIONS: 164.2 mm (6.46") long, 38.8 mm (1.53") diameter
- OUTPUT CONNECTOR: Integral 3-pin XLRM-type
- ACCESSORIES FURNISHED: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
- AUDIO-TECHNICA CASE STYLE: T5
Audio-Technica ATW-1102 Handheld Dynamic Vocal Wireless Microphone System
$ 349.95 $ 524.99
The Audio Technica ATW-1102 package includes ahandheld dynamic microphone.transmitter and a receiver. It comes with an ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.
Audio-Technica's System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space.
Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
System 10 2.4GHz Digital Wireless Handheld System
-
Overall system specifications
Operating Frequencies: 2.4 GHz ISM band
Dynamic Range: >109 dB (A-weighted), typical
Total Harmonic Distortion: <0.05% typical
Operating Range: 30 m (100') typical
Open range environment with no interfering signals
Operating Temperature Range: 0 C to +40 C (32 F to 104 F)
Battery performance may be reduced at very low temperatures
Frequency Response: 20 Hz to 20 kHz
Depending on microphone type
Receiver specifications
Receiving System: Diversity (frequency/time/space)
Maximum Output Level: XLR, balanced: 0 dBV
1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
Dimensions: 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
Net Weight: 290 grams (10.2 oz)
Accessory Included: Power supply
Handheld transmitter specifications
RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Batteries Two 1.5V AA
not included
Battery Life >7 hours (alkaline)
Depending on battery type and use pattern
Dimensions 254.8 mm (10.03") long,
50.0 mm (1.97") diameter
Net Weight 280 grams (9.9 oz)
without batteries
Accessory Included AT8456a Quiet-Flex stand clamp
Audio-Technica ATW-901A/G System 9 VHF Wireless Unipak System
$ 174.95
Frequency-agile VHF wireless system with guitar microphone transmitter.
Audio-Technica's System 9 is a four-channel wireless microphone system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in handheld, headworn, guitar, lavalier and body-pack configurations. The system offers four compatible user-switchable VHF channels.
This System 9 configuration includes the ATW-R900a receiver and a guitar microphone/transmitter. The ATW-R900a is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900a also offers volume control along with AF Peak, RF and Power indicator lights.
- Analog or digital: Digital
- Frequency response: 8 Hz - 13 kHz
- Width: 7.48 in.
- Height: 1.82 in.
- Depth: 5.06 in.
- Weight: 12 oz
- Type: Guitar Mic
Audio-Technica Pro 61 Vocal Microphone
$ 69.00 $ 119.00
Taylored for vocals, it lets you be heard onstage.
The Audio-Technica PRO 61 is an exceptional vocal stage microphone. A dynamic mic that delivers outstanding gain before feedback, the PRO 61 has plenty of the presence needed for lead vocals. Its hypercardioid polar pattern improves isolation of the voice from surrounding sounds. The PRO 61 mic's superior internal shock mounting eliminates handling noise. A neodymium magnet yields the articulate reproduction needed for vocal use. Rugged Audio-Technica design and construction assure that the PRO 61 will serve you reliably with a long use life.
- Excellent gain before feedback
- Outstanding stage presence for lead and back-up vocals
- Extended frequency response for optimal clarity and smooth, natural sonic characteristics
- Hypercardioid polar pattern improves isolation of desired sound source
- Superior internal shock mounting reduces handling noise
- Hi-ENERGY neodymium magnet for articulate vocal reproduction
- 2-stage ball-type headcase for superior "pop" protection
- Gold-plated XLRM-type connector
- Rugged design and construction for reliable performance
PRO 61 Hypercardioid Dynamic Microphone
- Element: dynamic
- Impedance: 300 ohms
- Polar Pattern: hypercardioid
- Weight: 11-3/4 oz (335 g)
- Frequency Response: 70 - 16,000 Hz
- Output Connector: XLRM-type
- Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
Audio-Technica System 10 Pro ATW-1301 Body-Pack System
$ 469.00 $ 660.00
Audio-Technica' System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.
Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.
Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two ATW-T1001 UniPak body-pack or ATW-T1002 handheld transmitters, or one of each. Both the receiver chassis and transmitters feature easy-to-read displays.
FEATURES
- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- Operates in the 2.4 GHz range “ completely free from TV interference
- Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
- Up to five chassis (ten receiver units) can be linked and used simultaneously
- Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
- Chassis™ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and setup
- Three levels of diversity assurance: frequency, time & space
- Ground-lift switch helps eliminate audible hum caused by ground loops
General
- Analog or digital: Digital
- Frequency response: 20Hz-20kHz
- Dynamic range: 109 dB
- Line of sight: 200 ft.
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2024 Huber Breese Music. Powered by Shopify
