Products
Bad Cat 112X Guitar Amplifier Cabinet
$ 579.00 $ 669.00
Incredible craftsmanship in a boutique-quality cab to match your Bad Cat head.
Bad Cat head and extension cabinets are built the exact way its amp cabinets are made, using the highest-quality materials. This 1x12" cab, loaded with a Bad Cat proprietary speaker, is designed with an open back for the fullest sound, allowing for the deepest lows, cutting mids and the cleanest highs.
- Power handling: 60W
- Speaker: 1x12" Bad Cat proprietary
- Impedance: 8 ohm
- Dimensions: 24" x 18.5" x 10.5"
Bad Cat USA Player Series 15R Guitar Amplifier Head
$ 1,299.99
- 15 Watt Class A (2 x EL84)
- Cathode biased
- K Master® circuit
- Foot-switchable 12AX7 or EF86 pre-amp tubes
- Foot-switchable boost circuit
- 4, 8, 16 ohm selector
- Studio grade plate reverb
- Effects loop
Overview
The USA Player Series Cub 15R preserves the purity of the original Cub circuit while offering increased flexibility. This improved design offers the ability to select between a 12AX7 or EF86 pre-amp tube using the mini toggle on the faceplate or the included footswitch. This new feature offers far more gain and versatility than previous Cub models.
We also added a selectable tone stack boost in both modes to give this pure single channel amp four unique gain stages. It can achieve everything from the traditional Cub 12AX7 chime to complex EF86 gain tones that were unachievable on earlier versions of the Cub.
A two button footswitch to select the EF86 or 12AX7 pre-amp tube and engage the boost is included.
K Master® Patent Pending
The K Master® circuit is a completely original approach to power amp management which simultaneously controls current, voltage, gain, harmonic clipping and signal amplitude at intricate variables at the turn of one knob. This groundbreaking analog circuitry can achieve any amount of gain at any desirable volume while keeping tone and touch response 100% intact. The K Master also allows the power tube section to achieve something never before possible. When turned beyond 2 o'clock on the dial it begins to push the power section into harmonic saturation independent of the where the preamp gain is set. Combine this function with the pre-amp set sparkling clean to achieve big clean tones that ooze with rich power tube harmonics.
Reverb
We discovered a unique way to make our reverb sit perfectly in the mix without ever overpowering the instrument or stealing tone from the preamp. This approach produces studio grade reverb right through your loudspeaker.
Electronics
- Power: 15 Watts
- Channels: 1
Tubes
- Power Tubes: 2 x EL84
- Pre-Amp Channel 1: 12AX7 and EF86
- Tone Stack Buffer: 12AX7
- Phase Inverter: 12AX7
Rectifier
- Solid State
Speaker
- Proprietary Bad Cat UK Celestion Speaker (8 ohms)
External Construction
- Chassis: Welded Aircraft Aluminum
- Head Shell: Finger-Joined Italian Poplar
- Combo: Finger-Joined 11 Ply Baltic Birch
- Heavy Duty Leather Handle
- Powder Coated Steel Corners
Weights and Dimensions
- 112 Combo: 48 lbs, 24" W x 10.5" D x 18.5" H
Blackstar HT Club 40 Deluxe Combo Guitar Amplifier
$ 699.99 $ 979.99
FEATURES:
- Black basketweave tolex
- Artisan fret for a classic boutique appearance
- Upgraded with a Celestion A-Type speaker
- Award-winning boutique clean tones and modern high gain distortions Blackstar reverb specially voiced for guitar
- Blackstar’s patented ISF control
- Metal DELUXE badge fitted
Blackstar HT Stage 60 Combo Guitar Amplifier
$ 999.99 $ 1,399.99
The HT Stage 60 guitar amp's selected duet of EL34s deliver 60W of glorious valve power through two high quality Celestion speakers, making for a combo that will deliver every night, even in the most testing live environment. The 'boutique' style clean channel is extremely versatile with two modes - 'British Class-A' and 'dynamic US'. Each of the two ISF equipped overdrive channels allows a further two modes.- 60 Watt valve combo
- 2xECC83, 2xEL34
- Three footswitchable channels
- 2x12" Celestion speaker
- Enhanced tone controls
- Patented Infinite Shape Feature (ISF)
- Clean voice switch 1
- Clean voice switch 2
- Resonance
- Presence
- Master volume
- Digital reverb with dark/bright switch
- Speaker emulated output with 1x12/4x12 voicing
- Effects loop with effects level switch
- 4-way footswitch included
- Cool vintage styling
Blackstar HT-20R MKII Tube Combo Guitar Amplifier
$ 599.99 $ 819.99
The HT-20R MkII offers huge versatility for home, rehearsal or studio use. The carefully voiced preamp, coupled with an EL84 power amp, provides you with the ability to create wonderfully lush valve tones. From pure boutique cleans, to mild overdrive that cleans up by backing off the guitar volume control, right up to saturated distortion, this amp does it all.
Adding the features that guitarists have requested, plus stunning new boutique cosmetics, the HT-20R MkII redefines the compact valve amp. Utilizing the iconic EL84 power amp design, you get unparalleled dynamics, response, and versatility. The HT-20R MkII features Blackstar's best clean and overdrive tones, including sounds inspired by classic American & British amplifiers, from clear and punchy cleans to searing overdrive. Each channel is now equipped with a footswitchable voice mode, allowing for even more tonal flexibility. Joining Blackstar’s patented ISF tone control is a USB and balanced XLR outputs for pro recording, a power reduction switch, and a newly voiced studio-quality reverb.
- Power: 20W
- Attenuation to 2W
- Tubes: one 12AX7 (preamp), two EL84 (power amp)
- Two channels
- Speaker: 1x12" custom
- Built-in studio-quality reverb
- Effects Loop
- USB audio out
- XLR D.I. out
- 2-button footswitch included
Blackstar ID Core 150 Combo Guitar Amplifier
Sold Out $ 619.99
Utilising the revolutionary technologies of Blackstar’s award winning ID:Core range, the ID:Core 100 and 150 stereo combos are the latest models to the family bringing brand new features such as infinite looping and octave modulation in a high wattage and lightweight package perfect for the gigging guitarist.
With deep editing functionality through the Blackstar INSIDER software and the option to create, upload and download other user’s patches through the community section the user has access to a truly limitless scape of tonal possibility. USB connectivity allows direct recording from amp to computer with ease and emulated output and mp3 line input provide even further recording functionality. With all the innovation, tone and features of their smaller counterparts including the Super Wide Stereo experience these amplifiers will take your sound to the next level.
-
6 CLASSIC BLACKSTAR VOICES
The unique Voice control has six different channels - Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1, OD 2. When used together with Blackstar's patented ISF control you can get the exact tone you're thinking of.
SUPER WIDE STEREO
Blackstar’s unique Super Wide Stereo technology gives you an immersive sound experience that will have you playing along to your MP3 backing tracks for hours.
INSIDER SOFTWARE
Plug the amp in to a mac or PC with the USB connection. This will give enable you to edit patches, record and re-amp audio and much more via the GUI.
ISF CONTROL
The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more ‘woody’ and less aggressive.
BUILT-IN LOOPER
The new built-in looper provides both live performance and personal home practice options for players of all skill levels. Whether playing live as a solo artist or as the lone guitarist in a power duo (or trio), the simple and intuitive looper helps you to achieve a stage-filling, multiple track sound at the press of a footswitch (included), with unlimited overdubs.
OCTAVER
Evolution of the ID:Core effects section in creating a new Chorus-Flanger effect makes way for the new polyphonic Octaver. Create everything from thundering detuned lows with the Octave Down to a shimmering 12-string effect with the Octave Up, or even a polyphonic wall of sound with a personal mix of anywhere in-between.
Product Range ID:Core High Power Model ID:Core Stereo 150 Technology Type Digital ELECTRONICS Wattage 150 Inputs Guitar Input, MP3/Line Input, USB Input Controls 6 Voice Control, 12 Effects Control, Tap Tempo, USB Input, Gain, Volume, ISF, Effect Level, Looper, Octaver Channels 6 - Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1, OD 2 DIMENSIONS Weight 12.5KG Dimensions (Width x Height x Depth) 573 x 447 x 241 (mm)
Blackstar ID Core Stereo 10 v2 Limited Midnight Blue Digital Guitar Amplifier
Sold Out $ 158.99
The ID:Core Stereo 10 V2 is a 2x5W ultimate entry level guitar amplifier. Incredible tone and flexibility is accessed by a simple and intuitive control set and delivered in SUPER WIDE STEREO to give an immersive playing experience that will have you hooked on playing guitar.
ID:CORE V2 represents the culmination of more than nine years’ technical Research and Development. These amps have an intuitive control set like a traditional amp, but have the versatility of programmability. The unique controls allow you, the guitarist, to custom design your own sound. The unique and enhanced Voice control has six different channels - Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1, OD 2. When used together with Blackstar's patented ISF control you can get the exact tone you're thinking of. The effects section delivers studio quality modulation, delay and reverb effects simultaneously that you can store with your sound.
Deep editing and storing of patches is simple using the Blackstar INSIDER software. Patches can be shared, uploaded and downloaded via the online community. The USB connector also allows you to record from your amp directly to your computer; new USB 2.0 functionality makes for easier recording and reamping, plus the ability to record just the preamp out for adding your own effects and cabinet emulation in the DAW/post-processing. An emulated output, MP3/line input and inbuilt panel-accessible tuner complete the package.
By using the unique Voice control and the patented ISF, ID:CORE Series amplifiers allow unparalleled flexibility and ease of use, enabling you to design the sound in your head and deliver it at home, in the studio or in rehearsal.
- 2x5W programmable combo
- Super Wide Stereo
- EQ with patented ISF
- Voice - select from 6 classic channels
- 12 Stereo Effects
- Store up to 6 of your sounds
- Free INSIDER software
- USB Mini B for use with INSIDER and Recording (Cable Not Included)
- Stereo MP3/Line In with dynamic EQ for great sounding music playback
- Speaker Emulated Line Out for silent practice or recording
- Stereo speaker configuration
- Mains powered via a separate PSU (Included)
Blackstar ID Core Stereo 20 V2 Black Digital Guitar Amplifier
Sold Out $ 224.99
The ID:Core Stereo 20 V2 is a 2x10W ultimate entry level guitar amplifier. Incredible tone and flexibility is accessed by a simple and intuitive control set and delivered in SUPER WIDE STEREO to give an immersive playing experience that will have you hooked on playing guitar.
ID:CORE V2 represents the culmination of more than nine years’ technical Research and Development. These amps have an intuitive control set like a traditional amp, but have the versatility of programmability. The unique controls allow you, the guitarist, to custom design your own sound. The unique and enhanced Voice control has six different channels - Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1, OD 2. When used together with Blackstar's patented ISF control you can get the exact tone you're thinking of. The effects section delivers studio quality modulation, delay and reverb effects simultaneously that you can store with your sound.
Deep editing and storing of patches is simple using the Blackstar INSIDER software. Patches can be shared, uploaded and downloaded via the online community. The USB connector also allows you to record from your amp directly to your computer; new USB 2.0 functionality makes for easier recording and reamping, plus the ability to record just the preamp out for adding your own effects and cabinet emulation in the DAW/post-processing. An emulated output, MP3/line input and inbuilt panel-accessible tuner complete the package.
By using the unique Voice control and the patented ISF, ID:CORE Series amplifiers allow unparalleled flexibility and ease of use, enabling you to design the sound in your head and deliver it at home, in the studio or in rehearsal.
- 2x10W programmable combo
- Super Wide Stereo
- EQ with patented ISF
- Voice - select from 6 classic channels
- 12 Stereo Effects
- Store up to 6 of your sounds
- Free INSIDER software
- USB Mini B for use with INSIDER and Recording (Cable Not Included)
- Stereo MP3/Line with dynamic EQ for great sounding music playback
- Speaker Emulated Line Out for silent practice or recording
- Stereo speaker configuration
- Mains powered via a separate PSU (Included)
Blackstar- SILVERLINE SPECIAL 50w 1x12- Guitar Amplifier
Sold Out $ 729.99
When it’s time to push some air, you want the Silverline Special. With 50 Watts of power emanating out of a 12” Celestion V-Type speaker, the Special boasts enough volume and headroom to equal any similarly powered valve design. Ideal for live players that need a wealth of tones on demand, it’s loaded with six easily adjustable voices, six Response settings, and 12 studio-grade onboard effects ready to answer the call. Pair it with Blackstar’s FS-10 4-button footswitch (optional), and swing from ambient cleans to sustaining leads in an instant.
Specification
- State-of-the-art digital guitar amplifiers with groundbreaking SHARC® DSP power
- Attractive, boutique styling
- Response control based on patented TVP technology accurately reproduces the nuances of classic power amp circuits (EL84, 6V6, EL34, KT66, 6L6, KT88)
- Patented ISF sweeps from American to British tone
- 6 proprietary Blackstar preamp voices (Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1, OD 2)
- USB port offers effortless direct recording and re-amping
- INSIDER software unlocks deep-editing features and patch management/sharing
- MP3/Line In and Em. Out/Phone jacks deliver studio-ready tone for 'silent' practice
- Powerful enough for any stage, subtle enough for home
- Manual and Preset operation with 12 fully customizable preset locations (128 with footswitch)
- Loaded with Celestion V-type speakers
Blackstar- SILVERLINE STANDARD 20w - Guitar Amplifier
$ 429.99 $ 599.99
If you’re on the hunt for the ideal grab-and-go combo, the Silverline Standard is the perfect choice. This 20 Watt, 1 x 10” combo boasts all of the processing power, tonal options, and connectivity of its bigger brothers, but in a form factor that's ideal for musicians on the move. And don't let its compact demeanour fool you. With six preamp voicings, six Response options, and 12 studio-grade effects onboard, the Silverline Standard holds its own in any genre and on any stage.
Specification
- State-of-the-art digital guitar amplifiers with groundbreaking SHARC® DSP power
- Attractive, boutique styling
- Response control based on patented TVP technology accurately reproduces the nuances of classic power amp circuits (EL84, 6V6, EL34, KT66, 6L6, KT88)
- Patented ISF sweeps from American to British tone
- 6 proprietary Blackstar preamp voices (Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1, OD 2)
- USB port offers effortless direct recording and re-amping
- INSIDER software unlocks deep-editing features and patch management/sharing
- MP3/Line In and Em. Out/Phone jacks deliver studio-ready tone for 'silent' practice
- Powerful enough for any stage, subtle enough for home
- Manual and Preset operation with 12 fully customizable preset locations (128 with footswitch)
- Loaded with Celestion V-type speakers
Bolt BTC50 410 Combo Guitar Amplifier
$ 1,799.99 $ 2,399.99
- CHANNELS: Two
- CONTROLS: (Rhythm and Lead channels) Gain, Level, Bass, Mid, Treble, Reverb, Voice switch and Active Tone switch. Level (master), Presence, Boost volume, and assorted selection pushbuttons in master section
- POWER: 50 watts
- TUBES: Two 12AX7 preamp tubes (one for phase inverter), two 6L6 output tubes.
- EXTRAS: Switchable effects loop, assignable three-voice reverb, speaker-emulated DI, dual speaker outs with 4/8/16Ω switch, multiple footswitch outs, single-button channel-switching footswitch included.
- SPEAKERS: Four Eminence Legend 10s
- WEIGHT: 65 lbs
- BUILT: USA
Bolt BTH-100 Guitar Amplifier Head USED
$ 1,999.99
BOLT'S 100-WATT GUITAR AMP SERIES,
designed and built in the USA, features boutique amp quality, tone and design at mid-range prices. Bolt also raises the bar for tube amp design by incorporating a computer chip that continually monitors the power and preamp tubes to ensure they deliver cranked amp tone at any volume and EQ setting. Combine this with three channels, each featuring level and gain, selectable active/ passive EQ, and three selectable voicings, and you have guitar amps that allow guitarists to find the exact tone and sound they want at any volume, no matter what style of music they play.
Features
- Selectable 100/50-watt tube head
- Two 12AX7 preamp & four 6L6 power amp tubes (user can substitute EL 34s)
- Emulated Line out with 2 different mic positions
- Front panel analog meter displays tube saturation of both preamp and power amp
Lead, Crunch, and Clean Channels
- Gain & Level Controls
- 3 selectable Reverbs
- Selectable Active & Passive EQ with Bass, Mid (swept in Lead Channel), Treble
- 3-position Voicing switch
Master Section Features
- Level
- Presence
- SoloBoost with amount, On/Off & Gain/Level Select
- Power amp Mute switch
- 2 effects loops each with Level, Series/Parallel select, & Channel Auto Assign
- Power amp Mute switch
Rear Panel Features
- 50/100 Watt Switch
- Chassis mounted Bias Switch (6L6 or EL34)
- Output Impedance Selector
- Slave Out Level
- Mic position for emulated line out
- Ground lift for emulated line out
- Series/Parallel Switch for each effects loop
- +4dBu/-10dBV Switch for each effects loop
- Effects Level for each effects loop
- Effects Loop Auto Assign (one for each channel)
- Reverb Type Switch (one for each channel)
- Reverb Types: Plate, Spring, Hall
Protection Racket PR5028W 28x12x12 Bag with Wheels
- Fully padded. Handles at both end, and one central handle. Clear inline skate wheels. Incredibly durable construction. Protect your hardware investment!
This is a USED Bolt BTH-100 guitar amplifier head being sold in "Like New" condition. This head has been very well cared for, and it shows! Included with this head is a Protection Racket Wheeled, padded bag which is also in "Excellent" condition. Footswitch, cables all included.
Boss ACS Acoustic Singer Live Acoustic Guitar Amplifier
$ 499.99 $ 649.99
Great power and features for small- and medium-sized gigs.
The ACS Live takes the acoustic stage amp to new levels of sound quality and creative versatility. Incorporating BOSS’s latest advancements in amplifier research, this compact powerhouse produces rich, vibrant sound with unmatched punch and clarity. Independent channels are provided for acoustic guitar and vocal, and each is equipped with discrete analog input circuits and three-band EQ for studio-quality sound. And with additional features such as Acoustic Resonance, looping, automatic vocal harmonies, effects, and much more, the ACS Live gives acoustic musicians everything they need to deliver inspiring and impactful live performances.
Natural Sound with Power, Definition and Presence
Amplifying your acoustic guitar with the ACS Live is a truly inspiring experience. BOSS engineers worked tirelessly to accurately reproduce the instrument’s fast transient response and natural, three-dimensional feel, and each amplifier element was carefully developed to achieve this. A powerful bi-amp design with extended peak power delivers tight, high-definition sound with ultra-clean broadband frequency response. The custom woofer and dome tweeter feature innovative materials and precision design points that work together to fill the stage with rich, naturally diffused sound. Other fine details include a unique cabinet construction method that eliminates unwanted resonances, and an integrated tilt-back design for maximum projection.
Guitar Channel with Acoustic Resonance
The ACS Live’s guitar channel features a discrete analog input circuit that provides ample headroom for the quick attack and wide dynamic range of the acoustic guitar. Also included is BOSS’s Acoustic Resonance, which employs advanced processing to eliminate the hard, sterile sound produced by the piezo pickups in most stage guitars. This powerful feature not only enhances the character of your pickup, but also restores the complex natural resonances that are so often lost when amplifying your acoustic. The channel provides a three-band EQ as well, plus a phase switch and notch control for keeping feedback issues at bay. Two types of chorus effects and a guitar-optimized reverb are also on hand to add a finishing touch to your sound.
Mic Channel for Vocals and More
The ACS Live also includes a dedicated mic channel, giving singing guitarists a compact, all-in-one amplification solution. A discrete analog input circuit delivers full, clear sound, and phantom power is on tap for using studio-grade condenser microphones. There’s also a three-band EQ, phase switch, and anti-feedback notch control, plus top-quality delay/echo and reverb effects to enrich your vocal sound. If you’re using the ACS Live for guitar only, this channel can alternately be used to mic up your acoustic. For players that use advanced setups, it also works great for blending another amplification source installed in the guitar, such as a second pickup or an internal mic.
Automatic Vocal Harmonies and Looping
A standout feature of the ACS Live is its vocal harmony function, which creates live harmonies as you sing and play guitar. It all happens automatically, so there’s no complicated setup needed. Your chord progressions are analyzed in real time, generating impressive harmonies perfectly tuned to the key of your song. And if you modulate to a new key, the intelligent processing follows along smoothly and accurately. Two different harmony types are available, plus a unison setting that doubles your voice for more impact. The amp’s built-in looper provides even more creative fun, allowing you to build live backing with guitar, vocals, effects, and more.
Advanced Connectivity and Control
The ACS Live’s rear panel is well stocked for your interfacing needs. Dual DI/Line outputs are provided on XLR connectors, and each features a versatile mode switch for outputting both channels mixed together, or individual channels direct or post-effects. There’s also an aux input with level control, perfect for playing backing music from your mobile device. A USB jack offers a direct computer connection to a DAW, while the Rec/Phones jack provides a standard 1/4-in. stereo connection for quiet practice sessions or recording to portable devices. Numerous jacks are also available for controlling the harmony function, looper, effects and more via optional footswitches.
- Power: 60W
- Two channels: guitar, mic
- Two inputs: Mic channel with phantom power and 1/4-inch/XLR combo input for connecting a vocal/guitar microphone or second instrument source
- Speakers: 1x6.5 woofer, dome tweeter
- Controls: 3-band EQ, phase switch, notch control, chorus, reverb
- Built-in FX: Chorus on guitar channel, delay/echo effect on mic channel, and independent reverb on both channels
- Harmony function automatically creates smooth and accurate vocal harmonies via real-time key/chord analysis of the guitar input
- Built-in looper for practicing, developing ideas and enhancing live performances
- Independent anti-feedback controls on each channel
- Dual XLR DI jacks assignable to outputting individual channels (direct or post-effects) or both channels mixed together
- USB output for direct recording to a computer
Boss Katana 100/212 100W Combo Guitar Amplifier
$ 499.99 $ 599.99
A massive amount of power and versatility in a do-all 2x12 combo.
Katana—the traditional sword carried by the historic samurai of Japan—is a symbol of honor, precision, and artistry in Japanese culture. Adopting the majestic sword’s name with pride, the Katana series presents guitar amplifiers with smooth, cutting tones honed by generations of dedication and expertise. Born of the development process behind the acclaimed Waza amplifier, these innovative amps embody BOSS’s determined pursuit of the ultimate rock sound. Featuring proprietary circuit designs and meticulous tuning, the Katana series combines traditional craftsmanship and breakthrough functions to produce true next-generation rock amplifiers.
With 100 watts of power and a pair of custom 12-in. speakers, the Katana KTN-100 delivers a commanding range of gig-worthy tones that gracefully slice through any band scenario. The amp also excels for home playing, with a uniquely efficient design and innovative Power Control that provides inspiring sound and response at low volumes. In addition, the Katana KTN-100 includes integrated access to 55 BOSS effects, which are customizable using the free BOSS Tone Studio editor software. Up to 15 different effects can be configured in the amp at one time, enabling you to bring fully prepared tones to the stage in one amp.
A Refined Amp with Inspiring Tone
Designed for guitarists who are serious about their sound, the Katana KTN-100 offers exceptional tone and touch response for stage playing, recording, and simply practicing at home. The custom 12-in. speakers are driven by a special method developed for the flagship Waza amp that optimizes the speaker and cabinet character. This gives you authoritative punch and cutting presence previously attainable only with high-end amp designs. In combination with the five selectable amp characters, the Katana KTN-100 produces class-defying power and expressiveness to meet any playing situation.
Five Original Amp Characters, Honed for Rock Playing
Sharpened to perfection by the BOSS engineering team, the Katana KTN-100’s five amp characters offer everything from organic vintage tones to modern high-gain sounds. Clean is natural and transparent, while Crunch offers satisfying grit and response. Lead has a wide gain range to suit many styles, from fat, stinging blues solos to fluid legato shredding. With DNA inherited from the Waza amp, Brown delivers refined high-gain tone sought after by the world’s greatest rock players. The Acoustic character further enhances the Katana’s versatility, providing optimized tone that makes acoustic-electric guitars sound stunningly natural.
Leave Your Pedalboard at Home
With its built-in BOSS effects and recallable Tone Settings, the Katana KTN-100 lets you perform anywhere with just a guitar and amp. Connecting to BOSS Tone Studio via USB provides access to 55 effects that are fully customizable for your needs. Going beyond standard distortion, delay, and reverb, the selection also includes powerful tone-shapers like pitch shifting, ring mod, slicer, and more. You can load 15 different effects in the amp at one time and use up to three simultaneously. Four Tone Settings let you store custom amp and effects setups for instant recall, and you can always jump to the current panel settings at the touch of a button. It’s also possible to connect optional footswitches and expression pedals for hands-free control on the gig.
Grab-and-Go Operation
While the Katana KTN-100 includes many advanced features, it’s amazingly simple to operate. Dedicated knobs for multiple gain stages, three-band EQ, and presence allow you to quickly dial in your tone by ear, just as you would with a standard tube amp. Essential effects parameters are adjusted with a simple knob twist, and memories can be stored with a brief button hold. The Power Control is great for throttling back the volume for small stages and home playing, and also includes a Standby setting that mutes the sound for switching guitars or taking breaks. And by flipping out the integrated tilt stand, you can easily angle the amp back for better sound projection.
BOSS Tone Central
At the BOSS Tone Central website, you’ll find numerous free amp and effects setups for the Katana series. Created by pro guitarists, these setups provide ready-to-play sounds for various music styles, and also make great starting points for building your own sounds. They load into the memories in a Katana amp via the BOSS Tone Studio editor software, which is also available at the site. In addition to Katana effects selection and customization, BOSS Tone Studio gives you a convenient way to organize all your Katana setups for different gigs, recordings, and practice sessions.
- Power: 100W
- Built-in power attenuation
- Five amp modes
- Speaker: 2x12 custom
- Four memory slots for recalling amps and effects
- 55 effects: store 15, use up to three simultaneously
- Boss Tone Studio editor software integration
- Built-in tilt stand
Boss Katana Cabinet 212 150W 2x12 Guitar Speaker Cabinet Black
$ 349.99 $ 409.99
Get rich tone in a lightweight package that's purpose-built to make the most of the Katana-Head.
The versatile BOSS Katana Cabinet 212 is a companion cabinet for the popular Katana-Head guitar amplifier. BOSS’s special design provides enhanced bass response and rugged durability while keeping the weight down for easy mobility. The cabinet comes loaded with two custom 12-inch speakers that deliver powerful, punchy sound with rich, full bottom end, offering exceptional performance for tones from super-clean to ultra-heavy. And with the detachable back panel section, you can easily go from a tight and focused closed-back stack tone to the spacious open-back sound of a classic combo.
- Specially designed companion speaker cabinet for the 100-watt Katana-Head amplifier
- Delivers maximum tonal performance and rugged durability with reduced weight
- Rigid construction for big bottom end and tight, punchy response
- Detachable back panel section for closed-back and open-back tones from one cab
- Power handling: 150W
- Speakers: 2x12 custom
- Cabinet impedance: 8 ohms
- Additional rubber feet for using in a vertical configuration
Boss Katana-50 MkII 50-Watt 1x12" Guitar Amplifier
Sold Out $ 349.99
More Sounds, More Versatility
The stage-class Katana MkII lineup picks up where the first generation left off, building on the same core tones and features that have made the series such a worldwide smash. If you loved the original Katana amps, you'll love Katana MkII even more. And if you're new to the party, get ready for sound, feel, and versatility that soars far beyond its price class.
Five Amp Characters, Ten Overall Tones
Katana MkII's five primary amp characters offer everything from organic vintage tones to modern high-gain sounds, plus a dedicated voice optimized for acoustic-electric guitar. The characters have now been extended with newly voiced variations, providing a wider palette of tone options to craft your personal sound.
Five Effects At Once
Katana MkII now includes five simultaneous effects categories, putting the tone-shaping power of a massive pedalboard right inside your amp. Independent Booster, Mod, FX, Delay, and Reverb sections come loaded from the factory with three variations in each, providing 15 ready-to-play effects to choose from. Connecting to BOSS Tone Studio lets you dive much deeper if you want—customize the sections with over 60 different effect types, change the order with four different chains, and much more.
Full-Throttle Sound Every Time You Plug In
Backed by BOSS's Tube Logic approach, Katana MkII delivers the authentic output distortion characteristics of genuine tube amplifiers, with the sound and feel becoming richer and more responsive as you turn up the volume. But unlike that classic tube amp, Katana MkII's variable Power Control makes it easy to fly in the sweet spot without getting fired from the gig or kicked out of the house. Just throttle back the overall volume as needed to enjoy inspiring, cranked-amp sound anywhere you play, from bedroom to stage.
Amplify Your External Gear
The Katana-50 MkII rocks as a standalone amp, but it also excels as a powered cabinet for a favorite preamp, modeler, or multi-effects unit. Connecting to the rear-panel Power Amp In jack bypasses Katana MkII's preamp and effects, letting you tap straight into the Tube Logic power section, complete with grab-and-go Power Control. And with BOSS Tone Studio, the input can be easily optimized for your particular gear with a high-pass filter and adjustable gain.
One-Touch Recall Of Custom Setups
One of the Katana-50 MkII's most powerful features is the ability to store favorite amp character and effects setups in Tone Setting memories for instant recall. After you've dialed in a sound with the panel controls, simply save it to the desired memory with a quick button hold. Four Tone Settings (two banks of two) are available, with fast selection right from the panel. It's also possible to connect external footswitches for hands-free control on the gig.
Ready-To-Mix Direct Tones
The Katana-50 MkII features USB and phones/recording outputs with mic'd cabinet emulation, letting you send mix-ready amp tones to a computer DAW or headphones. The direct sound can be shaped with three different Air Feel settings, which are accessible from BOSS Tone Studio. Two-channel USB operation is supported, allowing you to track in true stereo with many of Katana's modulation, EQ, delay, and reverb effects.
BOSS Tone Studio Enhancements
BOSS Tone Studio has also evolved alongside the Katana MkII amplifiers. The interface has been updated with a refreshed look, and a number of parameters have been consolidated into the main screen for faster workflow. There's also a dedicated Pedal FX category, making it easier to assign wah and pedal bend effects to a connected expression pedal. And if you're a first-gen Katana owner, it's possible to import your custom patches and use them all with Katana MkII.
Features:
- Stage-ready 50-watt combo amp with a custom 12-inch speaker
- Tube Logic design approach produces class-defying power, authoritative punch, and cutting presence
- Five unique amp characters (Clean, Crunch, Lead, Brown, and Acoustic), plus newly voiced variations for each
- Five independent effects sections (Booster, Mod, FX, Delay, and Reverb), with three selectable variations in each
- Updated BOSS Tone Studio software for customizing your sound with over 60 different BOSS effects, channel and global EQs, adjustable routing, and much more
- Power Amp In for preamps, modelers, and multi-effects
- Four Tone Setting memories for storing and recalling all amp and effect settings
- Power Control for achieving cranked-amp tone and response at low volumes
- Three Cab Resonance options (Vintage, Modern, and Deep), selectable in BOSS Tone Studio
- Mic'd cabinet emulation on the USB and phones/recording outputs, with three Air Feel settings available in BOSS Tone Studio
- Rear-panel connections for up to two footswitches or an expression pedal
- Power Cable Included
Boss Katana-Air Wireless 30W 2x3 Guitar Combo Amplifier
$ 399.99 $ 549.99
Meet the Katana-Air, the world’s first totally wireless guitar amplifier. Featuring new cutting-edge wireless guitar technology developed by BOSS, the Katana-Air gives you the freedom to jam and practice without hassling with guitar cables. And with support for battery operation, there’s no need to plug into AC either, so you can play literally anywhere!
Though compact in size, the Katana-Air is serious about sound quality. Equipped with pro amp tones and effects from the performance-class Katana amplifiers, this wireless wonder delivers premium guitar sounds for any style of music. To further extend the cable-free experience, you can wirelessly edit and organize sounds with a dedicated app and jam with songs streamed from your smartphone. With the innovative Katana-Air and your favorite axe, casual playing has never been more convenient and inspiring.
The Ultimate Convenience for Jamming and Practice
With its premium Katana sound engine and wireless operation, the Katana-Air makes it easy to enjoy rich, dynamic guitar tones—complete with advanced BOSS effects—anytime and anywhere. And that means you’ll play more often, improve your skills, and have more fun. When you want to jam at home, there’s no need to set up your big rig or rely on the dry, boxy sound of a mini practice amp. Just plug the Katana-Air’s transmitter into your guitar and riff with great sound from anywhere in the room! Thanks to its portable size and ability to run on batteries, the Katana-Air is an equally great companion for travel, parties, jam sessions with friends, and more.
High-Performance Wireless Technology from BOSS
The Katana-Air features new low-latency digital wireless guitar technology developed by BOSS, providing transparent sound and ultra-quick response without any lag or dropouts. The included custom wireless transmitter plugs into any electric guitar, and has indicators for power and battery status. A convenient docking port in the amp charges the battery in the transmitter, providing up to 12 hours of total playing time per charge.
Always Ready to Play
Whenever the inspiration strikes, the Katana-Air is always ready to go. It operates in standby mode to conserve energy when idle, and instantly wakes when the transmitter senses motion. This means that you can leave the transmitter connected to your guitar, and then turn the amp on simply by picking up the instrument! And when you stop playing, the transmitter returns to standby mode to conserve your charge. In addition, the transmitter automatically establishes the optimum wireless connection when docked for charging, so there’s no complicated setup required.
Premium Katana Amp and Effects Tones
Equipped with the same tones and sound-shaping controls found in the performance-class Katana amplifiers, the Katana-Air offers inspiring sounds for any style. Five unique amp characters provide a wide range of tones, from sparkling clean to BOSS’s custom high-gain Brown sound. There’s even an Acoustic character optimized for playing acoustic-electric guitar. The amp also provides integrated access to over 50 BOSS effects, including mod, delay, reverb effects optimized for the Katana-Air’s stereo speaker system. And with six onboard memories, you can store and recall your favorite amp and effects setups at any time.
BOSS Tone Studio for iOS and Android Devices
The wireless Katana-Air is made even more powerful with its support for external wireless operation via Bluetooth. Available for both iOS and Android devices, the dedicated BOSS Tone Studio app gives you complete control of the Katana-Air right from your smartphone or tablet. You’re able to adjust all the amp’s panel controls, and get exclusive access to effects types and routings that are only available from the app. You can also save setups to the amp’s memories, organize sound libraries on your device, and download free patch collections directly from BOSS Tone Central.
Listen to Your Favorite Music and Play Along
The Katana-Air is a true stereo amplifier with two custom-tuned speakers and up to 30 watts of total power, delivering big, rich sound for both guitar amplification and full-range music reproduction. Over Bluetooth, you can stream music from your mobile device and play along with popular songs, backing tracks, YouTube lessons, and more. And when you just want to kick back, the Katana-Air performs double-duty as a high-quality mobile Bluetooth speaker for enjoying tunes from your music library.
Music Production and Silent Practice
The Katana-Air also includes a stereo headphones/recording output with guitar cabinet simulation. This lets you directly record pro-quality amp tones and effects in music production software, and enjoy inspiring stereo sound when practicing quietly with headphones. It’s even possible to adjust the cab simulation’s mic position with the Air Feel control in the BOSS Tone Studio app.
Features:
- Totally wireless guitar amplifier with newly developed BOSS technology delivers rock-solid sound with ultra-low latency
- Custom wireless transmitter plugs into any electric guitar and charges while docked in the amp
- Transmitter provides 12 hours of playing time on a single charge, and automatically enters standby mode to conserve the charge when no activity is detected
- Always ready to play, with motion sensing technology in the transmitter that instantly wakes the amp from power-saving standby mode
- Premium tones derived from the Katana stage amplifier series, with five unique amp characters and access to over 50 world-class BOSS effects
- Six onboard memories for storing favorite amp and effects setups
- Powerful stereo speaker system with full-range sound and up to 30 watts of power*
- Edit and organize tones wirelessly with the BOSS Tone Studio app for iOS and Android mobile devices
- Play along with music streamed wirelessly from a mobile device via Bluetooth
- Amplifier powered by eight AA-size batteries or included AC adapter
- Aux in for connecting wired devices, plus headphones/recording out for silent practice and music production
- *The Katana-Air produces 30 watts of power when connected to AC, and 20 watts of power when running on batteries.
Specifications:
- Power: 30W (AC power; 20W battery power)
- Five amp characters
- Stereo speaker design
- Over 50 FX
- Bluetooth integration
- Android and iOS mobile-device integration
- Wireless operation via included transmitter
- Optional battery operation
Boss KTN-100 Katana 112 Combo Guitar Amplifier
Sold Out $ 549.99
Experience this high-powered, all-in-one rig and be blown away.
Katana—the traditional sword carried by the historic samurai of Japan—is a symbol of honor, precision, and artistry in Japanese culture. Adopting the majestic sword’s name with pride, the Katana series presents guitar amplifiers with smooth, cutting tones honed by generations of dedication and expertise. Born of the development process behind the acclaimed Waza amplifier, these innovative amps embody BOSS’s determined pursuit of the ultimate rock sound. Featuring proprietary circuit designs and meticulous tuning, the Katana Series combines traditional craftsmanship and breakthrough functions to produce true next-generation rock amplifiers.
With 100 watts of power and a custom 12 in. speaker, the Katana KTN-100 delivers a commanding range of gig-worthy tones that gracefully slice through any band scenario. The amp also excels for home playing, with a uniquely efficient design and innovative Power Control that provides inspiring sound and response at low volumes. In addition, the Katana KTN-100 includes integrated access to 55 BOSS effects, which are customizable using the free BOSS Tone Studio editor software. Up to 15 different effects can be configured in the amp at one time, enabling you to bring fully prepared tones to the stage in one amp.
A Refined Amp with Inspiring Tone
Designed for guitarists who are serious about their sound, the Katana KTN-100 offers exceptional tone and touch response for stage playing, recording, and simply practicing at home. The custom 12-in. speaker is driven by a special method developed for the flagship Waza amp that optimizes the speaker and cabinet character. This gives you authoritative punch and cutting presence previously attainable only with high-end amp designs. In combination with the five selectable amp characters, the Katana KTN-100 produces class-defying power and expressiveness to meet any playing situation.
Five Original Amp Characters, Honed for Rock Playing
Sharpened to perfection by the BOSS engineering team, the Katana KTN-100’s five amp characters offer everything from organic vintage tones to modern high-gain sounds. Clean is natural and transparent, while Crunch offers satisfying grit and response. Lead has a wide gain range to suit many styles, from fat, stinging blues solos to fluid legato shredding. With DNA inherited from the Waza amp, Brown delivers refined high-gain tone sought after by the world’s greatest rock players. The Acoustic character further enhances the Katana’s versatility, providing optimized tone that makes acoustic-electric guitars sound stunningly natural.
Leave Your Pedal Board at Home
With its built-in BOSS effects and recallable Tone Settings, the Katana KTN-100 lets you perform anywhere with just a guitar and amp. Connecting to BOSS Tone Studio via USB provides access to 55 effects that are fully customizable for your needs. Going beyond standard distortion, delay, and reverb, the selection also includes powerful tone-shapers like pitch shifting, ring mod, slicer, and more. You can load 15 different effects in the amp at one time and use up to three simultaneously. Four Tone Settings let you store custom amp and effects setups for instant recall, and you can always jump to the current panel settings at the touch of a button. It's also possible to connect optional footswitches and expression pedals for hands-free control on the gig.
Grab-and-Go Operation
While the Katana KTN-100 includes many advanced features, it’s amazingly simple to operate. Dedicated knobs for multiple gain stages, three-band EQ, and presence allow you to quickly dial in your tone by ear, just as you would with a standard tube amp. Essential effects parameters are adjusted with a simple knob twist, and memories can be stored with a brief button hold. The Power Control is great for throttling back the volume for small stages and home playing, and also includes a Standby setting that mutes the sound for switching guitars or taking breaks. And by flipping out the integrated tilt stand, you can easily angle the amp back for better sound projection.
BOSS Tone Central
At the BOSS Tone Central website, you’ll find numerous free amp and effects setups for the Katana Series. Created by pro guitarists, these setups provide ready-to-play sounds for various music styles, and also make great starting points for building your own sounds. They load into the memories in a Katana amp via the BOSS Tone Studio editor software, which is also available at the site. In addition to Katana effects selection and customization, BOSS Tone Studio gives you a convenient way to organize all your Katana setups for different gigs, recordings, and practice sessions.
- Power: 100W
- Built-in power attenuation
- Five amp modes
- Speaker: 1x12 custom
- Four memory slots for recalling amps and effects
- 55 effects: store 15, use up to three simultaneously
- Boss Tone Studio editor software integration
Boss KTN-50 Katana V3 Combo Guitar Amplifier
Sold Out $ 349.99
Get a wealth of tones, FX and versatility from this powerful, portable, do-all 1x12 combo.
Katana—the traditional sword carried by the historic samurai of Japan—is a symbol of honor, precision, and artistry in Japanese culture. Adopting the majestic sword’s name with pride, the Katana series presents guitar amplifiers with smooth, cutting tones honed by generations of dedication and expertise. Born of the development process behind the acclaimed Waza amplifier, these innovative amps embody BOSS’s determined pursuit of the ultimate rock sound. Featuring proprietary circuit designs and meticulous tuning, the Katana series combines traditional craftsmanship and breakthrough functions to produce true next-generation rock amplifiers.
With 50 watts of power and a custom 12-in. speaker, the Katana KTN-50 delivers a commanding range of gig-worthy tones that gracefully slice through any band scenario. The amp also excels for home playing, with a uniquely efficient design and innovative Power Control that provides inspiring sound and response at low volumes. In addition, the Katana KTN-50 includes integrated access to 55 BOSS effects, which are customizable using the free BOSS Tone Studio editor software. Up to 15 different effects can be configured in the amp at one time, enabling you to bring fully prepared tones to the stage in one amp.
A Refined Amp with Inspiring Tone
Designed for guitarists who are serious about their sound, the Katana KTN-50 offers exceptional tone and touch response for stage playing, recording, and simply practicing at home. The custom 12-inch speaker is driven by a special method developed for the flagship Waza amp that optimizes the speaker and cabinet character. This gives you authoritative punch and cutting presence previously attainable only with high-end amp designs. In combination with the five selectable amp characters, the Katana KTN-50 produces class-defying power and expressiveness to meet any playing situation.
Five Original Amp Characters, Honed for Rock Playing
Sharpened to perfection by the BOSS engineering team, the Katana KTN-50’s five amp characters offer everything from organic vintage tones to modern high-gain sounds. Clean is natural and transparent, while Crunch offers satisfying grit and response. Lead has a wide gain range to suit many styles, from fat, stinging blues solos to fluid legato shredding. With DNA inherited from the Waza amp, Brown delivers refined high-gain tone sought after by the world’s greatest rock players. The Acoustic character further enhances the Katana’s versatility, providing optimized tone that makes acoustic-electric guitars sound stunningly natural.
Leave Your Pedalboard at Home
With its built-in BOSS effects and recallable Tone Settings, the Katana KTN-50 lets you perform anywhere with just a guitar and amp. Connecting to BOSS Tone Studio via USB provides access to 55 effects that are fully customizable for your needs. Going beyond standard distortion, delay, and reverb, the selection also includes powerful tone-shapers like pitch shifting, ring mod, slicer, and more. You can load 15 different effects in the amp at one time and use up to three simultaneously. Two tone Settings let you store custom amp and effects setups for instant recall, and you can always jump to the current panel settings at the touch of a button. It’s also possible to connect optional footswitches and expression pedals for hands-free control on the gig.
Grab-and-Go Operation
While the Katana KTN-50 includes many advanced features, it’s amazingly simple to operate. Dedicated knobs for multiple gain stages and three-band EQ allow you to quickly dial in your tone by ear, just as you would with a standard tube amp. Essential effects parameters are adjusted with a simple knob twist, and memories can be stored with a brief button hold. The Power Control is great for throttling back the volume for small stages and home playing, and also includes a Standby setting that mutes the sound for switching guitars or taking breaks. And by flipping out the integrated tilt stand, you can easily angle the amp back for better sound projection.
BOSS Tone Central
At the BOSS Tone Central website, you’ll find numerous free amp and effects setups for the Katana series. Created by pro guitarists, these setups provide ready-to-play sounds for various music styles, and also make great starting points for building your own sounds. They load into the memories in a Katana amp via the BOSS Tone Studio editor software, which is also available at the site. In addition to Katana effects selection and customization, BOSS Tone Studio gives you a convenient way to organize all your Katana setups for different gigs, recordings, and practice sessions.
- Power: 50W (solid state)
- Power control: 1/2W, 25W, 50W
- Two channels
- Five amp modes: acoustic, clean, crunch, lead, brown
- Single input
- Speaker: 1x12 custom
- Controls: 3-band EQ, gain, volume, boost/mod button, boost/mod knob, delay/FX button, delay/FX knob, reverb button, reverb knob, tap
- 55 FX (15 stored onboard)
- Integration with Boss Tone Studio software
- Built-in tilt stand
- Aux. input
- Recording/headphone output
- USB B port
- Footswitch sold separately
- Dimensions: 18.6 in. x 15.7 in. x 9.4 in.
- Weight: 25.7 lbs.
Boss Nextone Artist 80w 1x12 Guitar Combo Amplifier
$ 699.00 $ 899.00
Combining classic tube sound and feel with next-generation tonal diversity, the BOSS Nextone series presents an exciting new concept in professional guitar amplification. Distinctive channel voicings deliver a wide range of inspiring tones, while four selectable Class AB analog power amp types provide instant access to the unique characteristics of 6V6, 6L6, EL84, and EL34 output tube sections. Backed by BOSS's advanced Tube Logic approach, each power amp type re-voices the entire circuit from input to output, putting the complete sonic experience of these signature power stages in one amp for the very first time.
Want to dive deeper with even more sound customization? Just connect to the Nextone Editor and become a virtual tech, fine-tuning bias, sag, EQ, and other internal settings to perfectly match your individual style and touch. Nextone also includes convenient modern features for stage playing, such as built-in effects, a line out for mic-free direct tone, and a power control for expressive cranked-amp sound at manageable volumes. And thanks to Tube Logic, you get to enjoy all the great sound and response of your favorite tube designs without the backbreaking weight and ongoing maintenance hassles.
Next-Generation Guitar Amplification with Tube Logic
Widely acclaimed by guitarists everywhere, the Tube Logic design approach delivers real-deal sound, feel, and response by reproducing the complex interactive behaviors of tube amps in every way. This comprehensive process also brings valuable advantages for today’s players, including greater reliability, reduced weight, and maintenance-free operation. Tube Logic evolves even further with the Nextone series, unlocking access to deep tone customization features that are impractical or impossible with traditional tube designs. A Nextone amp puts the true response characteristics of the most famous amp designs at your fingertips, allowing you to tweak your sound with unmatched precision.
Instant Power Amp Re-Voicing
In a tube-based guitar amplifier, the preamp is important for basic tone shaping, but it’s the power amp design that really defines the overall sonic signature and playing feel. Most amps use a specific output tube type, while a rare few allow you to swap out different power tubes. Unfortunately, this process usually requires physical tube replacement and bench time with a tech, making it expensive and inconvenient. For the most part, you really needed to buy multiple amps to access the unique tonal characteristics of different output tube sections…until now.
Nextone changes all this with the ability to instantly re-voice its analog Class AB power amp section with one of the four classic designs. American sounds are represented with 6V6 and 6L6 output tube types, while British sounds are represented with EL84 and EL34 types. Unlike modeling amps, which simply feed pre-cooked amp models through a non-reactive amplifier, selecting a power amp type on the Nextone physically changes the complete output circuitry, as well as the way the preamp and speaker interacts with it. This makes the entire amp perform authentically at each setting, providing realism that’s only possible with the advanced Tube Logic approach.
Nextone Power Amp Types
• 6V6—Found at the heart of many legendary low-wattage American amps, the 6V6 output tube is known for its distinctively sweet, crisp tone and organic compression.
• 6L6—Used in classic American stage amps and some modern high-gain designs, the 6L6 output tube delivers high-headroom punch with a round and full midrange character.
• EL84—Famous as the power tube in British combo amps introduced in the late ‘50s and early ‘60s, the EL84 produces glassy, clean chime at lower volumes and rich, creamy distortion when cranked.
• EL34—The power tube found in the iconic British stack amps, the EL34 is loved for its warm, fat tone and unmistakable rock crunch.
Cranked Sound and Feel at Lower Volumes
With any tube amp, you really need to push its output tubes to get it to sing at its best. Unfortunately, this means turning up the volume, which is nearly always frowned upon by sound engineers, bandmates, and neighbors. Driven by Tube Logic, Nextone delivers the complex distortion characteristics of output tubes and their interaction with the output transformer and speaker, providing that rich, dynamically responsive sound we all love. And with Nextone’s adjustable power control, you can always experience this cranked-amp tone while matching the volume to any situation, be it home, studio, or stage.
Be Your Own Amp Tech and Customize Tones for Your Style and Touch
Nextone features a dual-channel design with clean and lead channels plus a shared three-band tone stack and presence control. Boost and Tone switches are on hand as well, allowing you to add some extra gain and sparkle if needed. With a quick button press, you can switch the amp into custom mode, which provides factory-tweaked variations of the standard clean and lead channels. Better still, the custom mode channels can be fine-tuned to your liking with the Nextone Editor software.
Via a friendly interface, the Nextone Editor gives you deep editing tools to refine the sound to perfectly match your personal style and favorite pedals. Set a channel’s tone stack to American or British types, shape the overall tone with a powerful channel EQ, and even tweak the playing response by adjusting bias, sag, and more. The Tone switch can be assigned to two different types, and the Boost switch can be set for different characters or even be assigned as a compressor. A system-wide EQ is available too, enabling you to define the tonal balance of the entire amp. And with 99 different user setups available, you’re able to customize Nextone’s sound for every gig you play.
Onboard Effects and Switchable Effects Loop
With its built-in delay, reverb, and tremolo effects, Nextone brings even more versatility and convenience to gigging guitarists. Using the Nextone Editor, the delay section in custom mode can be freely assigned to analog, tape, or SDE-3000 delay types or a tremolo effect, while the reverb can be assigned to plate, spring, or hall types. Furthermore, each effect type offers a deep set of parameters for dialing in the perfect tone. The amp also includes a loop for integrating your own effects, with series/parallel operation, loop position, and more selectable via the Nextone Editor.
Practical Features for Performance and Recording
Connecting with just a single cable, the optional GA-FC foot controller provides a command center for channel selection, Tone, Boost, effects, pedal volume, and more. If you want to travel even lighter, up to three FS-series footswitches can be used to control various functions. There’s also a line out for sending a direct signal to a PA, plus a phones/recording output for silent practice and tracking sessions. Using the Nextone Editor, the character of the direct sound can be set to one of three Air Feel settings for a range of mic’d cab tones.
External speaker jacks are included too, with support for connecting up to two 16-ohm 4x12 cabs for even bigger tones. In addition to providing communication with the Nextone Editor, the amp’s USB jack functions as a direct recording interface for your favorite DAW software. Multiple channels are supported, allowing you to record both a cab-emulated output and a dry direct tone for re-amping later through the Nextone.
Features
- Professional performance amplifier with authentic Tube Logic tone
- Four analog Class AB power amp circuits, selectable from the panel: 6V6, 6L6, EL84, and EL34
- Portable combo design with 80 watts of power and custom 12-inch speaker
- Clean and lead channels, with standard and custom mode options
- Dynamically responsive power control for cranked-up sound and response at reduced volumes
- Nextone Editor (Mac/Windows) for customizing internal amp parameters, including tone stack type, EQ, sag, bias, effects, system settings, and much more
- Boost and Tone switches for adding crunch and sparkle
- Built-in delay, tremolo, and reverb effects, plus loop for patching in external effects
- External speaker jacks: one 8 ohm and two 16 ohm
- Line, USB, and phones/recording outputs, with three Air Feel mic’d cab settings selectable from the Nextone Editor
- Support for direct recording and re-amping via USB
- Power: 80W
- Four power-amp circuits
- Speaker: 1x12" custom
- Built-in effects: delay, tremolo, reverb
- Effects loop
- External speaker output: 8, 16 ohm
- USB output
- Headphone output
Boss pedals - 5 year parts warranty
90 day labor warranty.
1 year warranty - Multitracks, Jamstations, etc.
Check with manufacturer for specific product warranty.
Budda SuperDrive 45 Series II Guitar Amplifier Head w/ Matching 4x12 Cabinet SOLD SEPARATELY - White
$ 549.00
Discover the magic tone of Budda's ultimate Hi-Gain Amp.
The Superdrive 45 represents years of research culminating in the design of the ultimate KT66 hi gain amp. The bite and complex overtones of Budda's KT66 circuit puts this amp in the realm of a newly discovered tone. The upper mid range bite combined with the tube rectifier sag makes for a very expressive amplifier, super sensitive to touch and pick attack. The bass response is earth shattering and sheer volume will have all the guitar players sniffing around your rig.
- 2 KT66 Power Tubes
- Treble, Mid, and Bass controls
- Rhythm Volume, Master Volume
- Pull Bright on Rhythm Volume
- Drive Control
- 2 Channels, Rhythm and Hi Gain
- Selectable Tube and Solid State Rectifier Switch
- Effects Loop
- Slave Out
- Pull/Modern Mid Eq function
- Custom Wound Transformer with 4-8 OHM Switch
- Multiple Speaker Outs
- 4-8-16 Ohm Selector Switch
- Dimensions:
- 30" x 14.5" x 14.5"
- 48 lbs
- 45 watts
- Dimensions:
- 30" x 14.5" x 14.5"
- 48 lbs
- 45 watts
4x12 Speaker Cabinet NOT INCLUDED - SOLD SEPARATELY
- 4 12" speakers
- Solid pine construction with dovetailed corners
- 8 ohms
- Dimensions:
- 28"x28"x14"
- Weight: 88 lbs
EVH 5150 III 100S 412 Guitar Amplifier Cabinet
$ 999.99 $ 1,333.32
100 watt, 16 Ohm, straight-front, 4x12" mono cabinet loaded with Signature Celestion® G12EVH speakers.
ELECTRONICS
Power Handling: 100 Watts
HARDWARE
Handle: Two Recessed Side-Mounted Plastic
Amplifier Length: 14" (35.56 cm)
Amplifier Width: 29.25" (74.3 cm)
Amplifier Height: 30" (76.2 cm)
Amplifier Weight: 88 lbs. (40 kg)
SPEAKERS
Speaker: Four - 12" Celestion® G12EVH
Speaker Impedance: 16 ohms
ACCESSORIES
Casters: Pop-out Casters Included
Accessories: Removable casters included.
Cover: Optional Fitted Cover Available
EVH 5150 III 100W Head LTD
$ 1,799.99 $ 2,399.99
Introducing the all-new EVH® 5150III® amplifier from Eddie Van Halen’s brand, EVH. EVH 5150III® heads and cabinets deliver the holy grail of tone - a truly clean channel, a super-heavy crunch channel and an off-the-scale overdrive channel you simply won’t believe. You get the incredible tones Eddie Van Halen has chased his whole life, as Eddie himself has defined and designed each of the 5150III® amplifier’s three channels. Available in black or ivory, with an unmistakable look and sound that’s pure EVH.
Product Specs
EVH 5150 III 212 Straight Guitar Amplifier Cabinet
$ 499.99 $ 666.65
A perfect match for the EVH 5150 III Head.
The new EVH 5150 III 2x12 cab is the perfect companion for the EVH 5150 III 50W head, delivering pure EVH sound and power in a compact package. The 5150 III 2x12 cab is rated at 16 ohms and is loaded with two 12" 30W Celestion Heritage speakers; it is exactly half the cubic size (by volume) of its 4x12 big brother. Features head-mounting mechanism and tilt-back legs.
FEATURES
- Two 12" Celestion G12H 30W Anniversary Speakers
- Side handles
- Birch plywood
- 60W
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2020 Huber Breese Music. Powered by Shopify
