Products
Radial StageBug SB-2 Compact Passive DI
$ 89.99 $ 108.00
Passive Direct Box
The StageBug SB-2 is a compact passive direct box that is perfect for active basses and keyboards, is small enough to fit inside an instrument case, and features a stereo to mono mix function to save mixer channels.
- Passive DI for bass, acoustic and keyboard
- Ultra compact to fit in your guitar case
- Plug & play easy to use feature set
- Transformer isolation eliminates noise
Small size and big performance
The compact design begins with a ¼" input and thru-put to feed the on-stage amp. This connects to the custom made Eclipse ET-DB3 transformer which performs the impedance matching and balances the signal. When using extra high output instruments, a -15dB pad can be inserted into the signal path. This enables the SB-2 to be used with active basses and digital pianos that often tend to overload the input side of the interface. An innovative stereo-to-mono merge function provides a convenient way to connect stereo keyboards and computers without having to reset the source for mono operation, saving time and input channels on the PA. The SB-2 output features an XLR wired to the AES standard with pin-2 hot. Once connected, the SB-2 delivers a smooth warm sound reminiscent of older vintage gear. The Eclipse ET-DB3 transformer is magical in its ability to handle extreme signal levels with a natural compression that is pleasing to the ears. The transformer also helps eliminate hum and buzz caused by ground loops by isolating the input from the output. This is augmented with a ground lift switch that lifts pin-1 on the XLR for quiet, professional results.
The Radial SB-2 is a compact passive direct box that is designed primarily for buffered sources such as active acoustic guitar, keyboard and electric bass. A unique stereo-to-mono merge function enhances functionality by enabling stereo keyboards to be connected and mixed mono to save channels in the PA. Upon testing, the SB-2 exhibits exceptionally linear response and low distortion throughout the desired operating range, proving that size does not necessarily follow performance! The compact design provides the traveling musician with a quality direct box that can be depended upon for the most demanding club gigs.
| Specifications | ||
|---|---|---|
| Audio circuit type: | Passive, transformer based | |
| Transformer: | Eclipse ET-DB3, 12:1 ratio | |
| Number of channels: | 1 | |
| Frequency response: | 20Hz ~ 20KHz (± 0.5dB) | |
| Dynamic range: | 115dB | |
| Total harmonic distortion: | 0.005% @ 1kHz | |
| Phase Deviation: | 3° @ 100Hz; 8° @ 50Hz | |
| Input Impedance: | 140k Ohms, unbalanced | |
| Output Impedance: | 1k Ohms, balanced | |
| Maximum Input: | +20dB | |
| Features | ||
| Input pad, Ground lift | ||
| Input Connectors: | 1/4" | |
| Output Connectors: | XLR | |
| General | ||
| Construction: | 14 gauge steel chassis & outer shell | |
| Size (L x W x D): | 4.5" x 1,85" x 1.35" (114mm x 47mm x 34mm) | |
| Weight: | 0.55 lbs (250 grams) | |
| Shipping size (L x W x D): | 8" x 5" x 3" (203mm x 127mm x 76mm) | |
| Shipping weight: | 0.8 lbs (365 grams) | |
| Power: | Passive, no power required | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
Radial Twin City Active ABY Amp Switcher
$ 219.99 $ 307.98
Active circuitry for noise-free switching
The Radial Twin-City uses a class-A input buffer to drive the amp outputs, which reduces susceptibility to noise and allows for completely silent switching on stage. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output-B, along with a ground lift switch and 180⁰ polarity reverse switch that ensures both amplifiers play back in phase with each other. At the input, Drag Control load correction allows you to recreate the natural load on the pickups as if you were connected directly to a tube amplifier, allowing the natural tone of your instrument to shine through.
Features
- Class-A audio signal path for high quality audio
- Drag control load correction for natural feel
- Isolated output to eliminate hum & buzz
- Electronic Impulse Switching to eliminate popping
Benefits
- Delivers the natural sound of your guitar to your amp
- Lets you transition between amps without noise
- Super compact, fits on any pedalboard
- Buffering circuit lets you drive long cables without hum
Cool Stuff
- Same signal path as the JD7 used by Vai, Lukather, Santana
- 180° polarity reveres switch ensures amps play in phase
- Easy to see LED indicators lets you know which amp is active
- No noise. Now that’s really important!
Dimensions (W x D x H)
- 3.6” x 4” x 2” (92mm x 100mm x 51mm)
- 3 Year transferable warranty
Rainsong John A. Decker Jr. V-OM1000NSKC Acoustic Guitar USED - Natural/Carbon Fiber
$ 2,499.00
**This guitar is used and in great condition. Little to no signs of wear can be found. Comes with the original hardshell case. The price has been adjusted accordingly.
Rainsong John A. Decker Jr. V-OM1000NSKC Acoustic Guitar - Natural/Carbon Fiber
Features
- L.R. Baggs Stage Pro Anthem Electronics
- Graphite/Carbon Fiber Build
- Original Hardshell Case
Randall RG1003H Guitar Amplifier Head
Sold Out $ 1,000.00
The RG1003H is a 3 Channel, 100 watt high gain FET solid state guitar amplifier head with Reverb and a serial F/X loop. It has a 1/8″ stereo media input, headphone output, and a speaker emulated XLR direct output with ground lift. There is also a footswitch included.
ELECTRONICS
OTHER
Rasial Headlight Guitar Amp Selector
$ 279.99 $ 336.00
Four Output Guitar Amp Selector
The Headlight is a unity gain guitar amp selector designed to easily integrate onto a pedalboard and provide the ability to switch between as many as four amplifiers with a single footswitch.
- Four output amp switcher with sequential switching
- Isolated outputs to eliminate hum and buzz
- Compact footprint easily fits on a pedalboard
- Mute footswitch for silent on-stage tuning
Small Size, Big Tone
The Headlight has a compact footprint that will fit on any pedalboard, but it's still powerful enough to drive up to four amplifiers without sacrificing on tone. The input features a class-A buffer along with Drag Control load correction that allows you to optimize the impedance for your pickups and recreate the feel of plugging your guitar directly into an amp. Custom transformers isolate the outputs to prevent buzz and hum from ground loops, with ground lift switches to further alleviate noise problems. Should you really want to get loud, the mute footswitch can be configured as an 'all on' switch, activating all four amp outputs simultaneously.
Driving four different amps on stage
Use the Headlight to switch between four stage amps to create the ultimate setup for clean, crunch, overdrive and power solo! Simply depress the selector footswitch to select the amp you want. Super bright LEDs let you know which amp is active. Use the mute footswitch for quiet on-stage tuning.
Using the Headlight as an ABY
Connect your two amps using outputs 1 and 2 and select between them using the right-hand footswitch. Set the left-hand footswitch to ALL-ON and when depressed, both amps will play. The isolation transformers will prevent buzz and hum from ground loops when both amps are on.
Using Headlight with DI Boxes and Amplifiers
Using the Headlight you can feed both direct boxes and amplifiers. The outputs from the direct boxes can be sent directly to the mixer and stage amps can be mic'd.
SPECS
| Specifications | ||
|---|---|---|
| Audio circuit type: | Classic Class-A FET | |
| Frequency response: | 30Hz - 30kHz | |
| Dynamic range: | 116dBu | |
| Gain: | -0.5dBu | |
| Clip Level: | +7dB | |
| Total harmonic distortion: | 0.01% | |
| Intermodulation Distortion: | 0.02% | |
| Phase Deviation: | -1.35° @ -20dBu / 1kHz | |
| Input Impedance: | 20k to 1MΩ | |
| Output Impedance: | 1kΩ | |
| Noise: | -112dBu | |
| Maximum Input: | +8dB | |
| Features | ||
| 180° polarity reverse, Ground lift, Drag Control | ||
| Input Connectors: | 1/4" | |
| Output Connectors: | 1/4" | |
| General | ||
| Construction: | 14-Gauge Steel | |
| Size (L x W x D): | 5" x 4.7" x 2" | |
| Weight: | 2lb | |
| Shipping size (L x W x D): | 6.5" x 5.1" x 2.5" | |
| Shipping weight: | 2.4lb | |
| Power: | 9V adaptor / 80mA (Center Pin Negative) | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
Rick Turner Model 1 Legacy #4 of 21 Electric Guitar -
Sold Out $ 9,800.00
- Serial Number: D6104
- Weight: 6.4 lbs
- Model: M1-DLX-CP
Specs
|
Body Wood |
Western Red Cedar Core with Quilted Maple Top and Back |
|
Neck |
Laminated Spanish Cedar / Purpleheart |
|
Fingerboard |
Honduran Rosewood |
|
Electronics |
1 Volume, 1 Tone with Push/Pull Coil Split, D-TAR Eclipse Preamp, Semi-Parametric EQ with Boost/Cut and Sweep Control, Piezo Bridge with Blender Control |
|
Nut Width |
1 11/16" |
|
Scale Length |
24 3/4" |
|
String Spacing |
2" at Bridge |
|
Cutaway |
Yes |
|
Strings |
D'Adarrio NYXL |
|
Tuners |
Gotoh 510 |
|
Purfling |
Abalone |
|
Binding |
Tortoise |
|
Pickup |
RT Hot Humbucker |
|
Construction |
Handmade |
|
Made In |
Santa Cruz, CA |
|
Case |
TKL Hardshell |
Rickenbacker 1993Plus 12 String Electric Guitar - Fireglo
$ 3,799.00 $ 3,944.00
This classic 12-string design comes standard with three vintage reissue pickups, stereo output, trapeze tailpiece, vintage knobs and f-hole. Double body binding and pearlescent inlays add a refined touch. X-bracing in the body helps to bring out the full, rich and warm sounds these instruments are known for. The 1993Plus also features Rickenbacker's master variable tone control. This fifth knob allows you to fine tune the EQ between the bass and treble pickups, in a variety of ways and with some unique characteristics.
The haunting, melodic chorus characteristics of Rickenbacker 12-strings continue to benefit from evolution. The original 1993 design was once exclusive to the British distributor Rose Morris in the sixties.
- Serial Number: 2405675
- Weight: 8.0 lbs
FEATURES
Body- Body shape: Double cutaway
- Body type: Semi-hollow or chambered body
- Body material: Solid wood
- Top wood: Not applicable
- Body wood: Maple
- Body finish: Gloss
- Orientation: Right handed
- Neck shape: Rickenbacker
- Neck wood: Maple
- Joint: Set-in
- Scale length: 24.75"
- Truss rod: Standard
- Neck finish: French polish
- Fretboard
- Material: Rosewood
- Radius: 10"
- Fret size: Medium jumbo
- Number of frets: 21
- Inlays: Triangle
- Nut width: 2.10" (53.5mm)
- Configuration: SSS
- Neck: Vintage single-coil Toaster Top
- Middle: Vintage single-coil Toaster Top
- Bridge: Vintage single-coil Toaster Top
- Brand: Rickenbacker
- Active or passive: Passive
- Series or parallel: Series
- Piezo: No
- Active EQ: No
- Special electronics: Stereo/mono output
- Control layout: Separate volume and tone for treble and bass pickups, and a master variable tone control
- Pickup switch: 3-way
- Coil tap or split: No
- Kill switch: No
- Bridge type: Fixed
- Bridge design: 6-saddle
- Tailpiece: Trapeze
- Tuning machines: Deluxe vintage
- Color: Nickel/chrome
- Number of strings: 12-string
- Special features: Versatile electronics
- Case: Hardshell case
- Accessories: None
Rickenbacker 2005 4003 4-String Electric Bass Guitar USED - Jetglo
Sold Out
This bass is used and in good condition. Little to no signs of wear. The price has been adjusted accordingly.
Comes with OHSC.
The Classic Rickenbacker bass - famous for its ringing sustain, treble punch and solid underlying bass. A subtle strip of binding graces the elegantly curved body and the Rosewood fingerboard. Deluxe triangular inlays and stereo capability are standard features.
- Serial Number: 39133
- Weight: 9.6 lbs
|
|
|||||||||||||||||||||||||||||||||||||||||||||
Rickenbacker 325C64 Electric Guitar - Jetglo
$ 3,599.00
The British Invasion of 1964 initiated a rise in popularity of the model 325. The Model 325C64 duplicates the Model 325 as produced in 1964—complete with semi-hollow Maple body, re-shaped body and headstock, three vintage-style pickups, and Accent Vibrato. Offered in Jetglo finish.
- Serial Number: 2502708
- Weight: 6.6 lbs
Specifications
|
|
|||||||||||||||||||||||||||||||||||||||||||||
Rickenbacker 330 12-String Electric Guitar USED - Fireglo
Sold Out
**This guitar is used and in good condition. There is some small blemishes on the on bottom of the guitar (see attached pictures). Comes with the original hardshell case. The price has been adjusted accordingly.
- Serial Number: 03687
- Weight: 8 lbs
Specs
- Body Material: Maple
- Inlays: Dot
- Number of Frets: 24
- Scale Length: 24.75 inches
- Nut Width: 1.63 inches
- Neck Material: Maple
- Fretboard Material: Rosewood
- Finish/Color: Fireglo
- Bridge Pickup: Rickenbacker Hi Gain
- Neck Pickup: Rickenbacker Hi Gain
- Case: Hardshell
Rickenbacker 350V63 Electric Guitar - Jetglo
$ 3,149.00
Classic Ric design with kickin' Ric performance.
Features
- Vintage reissue single-coil shielded pickups
- 21-fret neck
- Solid black knobs
- Classic design tuners
- Trapeze tailpiece
- 2 tone and 2 volume controls
- Single-piece hollow maple top
- Laminated maple neck
- Low-ratio sealed tuners
- Includes case
Specs
350V63 Electric Guitar Specifications:
- Body Type: Semi-Hollow
- No. Frets: 21
- Scale Length: 62.9 cm (24-3/4")
- Neck Width at Nut: 41.3 mm (1-5/8")
- Neck Width at 12th Fret: 49.2 mm (1-15/16")
- Crown Radius: 25.4 cm (10")
- Body Wood: Maple
- Neck Wood: Maple
- Fingerboard Wood: Rosewood
- Weight: 3.2 kg (7.0 lb.)
- Overall Length: 95.2 cm (37-1/2")
- Overall Width: 32.4 cm (12-3/4")
- Overall Depth: 38.1 mm (1-1/2")
- Fingerboard and Body Binding: No
- Fret Marker Style: Dot
- Tailpiece: Trapeze
- Bridge: 6-way
- Neck Type: Set-in
- No. of Pickups: 3
- Type of Pickups: Vintage Single-Coil Toaster Top
- Output Type: Mono
- Machine Heads: Deluxe Vintage
Rickenbacker 360 Electric Guitar - Fireglo
Sold Out
This guitar broke all the rules of traditional styling when it appeared amid the 'British' sound of the 1960's. Subtly updated through the years, this Deluxe hollow body with its special contour around the entire body perimeter, is still perhaps the most comfortable guitar of all. The bound body and Rosewood fingerboard, inlayed with triangular pearloid markers, provide an exceptionally attractive appearance. Stereo output is standard. Also available with an additional pickup
- Serial Number: 2501693
- Weight: 7.8 lbs
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
Rickenbacker 360 Electric Guitar - Jetglo
$ 2,499.00
This guitar broke all the rules of traditional styling when it appeared amid the 'British' sound of the 1960's. Subtly updated through the years, this Deluxe hollow body with its special contour around the entire body perimeter, is still perhaps the most comfortable guitar of all. The bound body and Rosewood fingerboard, inlayed with triangular pearloid markers, provide an exceptionally attractive appearance. Stereo output is standard. Also available with an additional pickup
- Serial Number: 2441769
- Weight: 7.8 lbs
| Specifications | ||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||
Rickenbacker 360/12-V64 Electric Guitar USED - Fireglo
Sold Out
- Serial Number: J94503
- Weight: 7.6 lbs
| Model | |
| Categories | |
| Year | |
| Fretboard Material | |
| Body Material | |
| Pickup Configuration | |
| Neck Construction | |
| Body Shape | |
| Number of Strings | |
| Right / Left Handed | |
| Body Type | |
| Neck Material | |
| Offset Body | |
| Finish Style | |
| Bridge/Tailpiece Type | |
| Finish Features | |
| Number of Frets |
|
Rickenbacker 4003 JG Electric Bass - Jetglo
$ 2,499.00
The Classic Rickenbacker bass - famous for its ringing sustain, treble punch and solid underlying bass. A subtle strip of binding graces the elegantly curved body and the Rosewood fingerboard. Deluxe triangular inlays and stereo capability are standard features.
- Serial Number: 2506678
- Weight: 9.6 lbs
|
|
|||||||||||||||||||||||||||||||||||||||||||||
Rickenbacker 4003 Limited Edition Electric Bass Guitar USED - Mapleglo
Sold Out
**This bass guitar is used and in excellent condition. Little to no signs of wear can be found on this product. Comes with the original hardshell case. The price has been adjusted accordingly.
- Serial Number: 36790
- Weight: 8.8 lbs
Specs
- Shape: C
- Wood: Maple
- Neck joint: Neck-through
- Scale length: 33.25"
- Truss rod: Yes
- Finish: Satin
- Active or passive pickups: Passive
- Pickup configuration: SS
- Neck: Single-coil
- Bridge: Single-coil
- Brand: Custom
- Series or parallel: Parallel
- FB Material: Maple
- Radius: 10" (25.4cm)
- Fret size: Medium
- Number of frets: 20
- Inlays: Dot
- Nut material: Info not available
- Nut width: 1.688" (42.9mm)
- Neck width at 12 fret: 2.125" (54mm)
- Cutaway: Double cutaway
- Construction: Solidbody
- Body wood: Walnut
- Bridge type: Fixed
- Bridge design: RIC
- Tailpiece: RIC
- Tuning machines: Schaller Deluxe
- Color: Chrome
- Case: Hardshell case included
Rickenbacker Electro 1935 "Frying Pan" A-22 Lap Steel Electric Guitar USED - Gray
$ 3,400.00
Rickenbacker Model A-22 Model Lap Steel Electric Guitar 1935
Natural aluminum finish
Cast aluminum body
single volume pot with an octagonal Bakelite knob. The fingerboard is integral with the neck and has raised ridges for frets and green, red, blue and black inlayed dot markers. horseshoe magnet pickup
The headstock is fitted with 1920's style open gear strip tuners with grained ivoroid buttons
Overall length is 28 3/4 in. (73 cm.), 7 in. (17.8 cm.)
width, and 1 5/8 in. (4.1 cm.) in depth, measured at side of rim.
Scale length is 22 1/4 in. (565 mm.).
Width of nut is 2 in. (51 mm.).
**Guitar is used in good condition for it's age. Black back could be aftermarket or custom order its not clear and a tone knob was added to lap steel. Guitar is missing one tuner knob, but was replaced by previous owner who welded a dime in it's place. comes with gig bag**
Rock-N-Roller R10RT Multi-Cart Max
$ 184.99 $ 259.00
The RocknRoller® Multi-Cart® R10RT is outfitted with rugged, foam-filled no-flat 10" rear wheels and 5" front swivel casters that will allow you to move massive amounts of gear quickly and easily. The R-Trac® tires ride smoothly with excellent traction, similar to pneumatic tires, but without the hassle of upkeep or repair. The patented 8-in-1 cart can transform easily to adjust to various load sizes, allowing you to move large amounts of gear in no time at all. Extending from 34" to 52" in length, the R10RT has a weight capacity of 500lbs, but also folds small for storage or transport in a vehicle. The textured powder coated steel is durable and also reduces slippage during transport.
Popular Uses:
DJ & Live Sound, Film & TV Production, Location Sound, Facility Maintenance, General Industrial, General Contracting, Electrical Contracting, Wedding Photography, Live Performance, Drums & Percussion, HVAC Contracting, Sports, Scientific/Field Study/Research, Delivery Vans, Pet Shows, Trade Shows
Specifications:
RocknRoller® Multi-Cart® 8-in-1 Equipment Transporter - Model R10RT
- Powder-coated steel tube frame telescopes from 34"-52" in length with 32" foldable sides
- 13.5" wide frame bed
- 10"x3" R-Trac no-flat rear wheels and 5" x 1.25" swivel casters with brake
- Load cap.: 500 lbs./32 cu. ft.
- Wt: 30lbs.
Additional specifications:
Tubing gauge: 16 gauge (0.065" wall)
Tubing size on main frame: .75" and 1" square steel tube
19mm axle
Polypropylene Hub with Polyurethane Foam tires
Rock-N-Roller R6RT Multi-Cart Mini
$ 159.99 $ 204.00
The RocknRoller® Multi-Cart® R6RT is outfitted with rugged, foam-filled no-flat 8" rear wheels and 4" front swivel casters that will allow you to move massive amounts of gear quickly and easily. The R-Trac® tires ride smoothly with excellent traction, similar to pneumatic tires, but without the hassle of upkeep or repair. The patented 8-in-1 cart can transform easily to adjust to various load sizes, allowing you to move large amounts of gear in no time at all. Extending from 28" to 42.5" in length, the R6RT has a weight capacity of 500lbs, but also folds small for storage or transport in a vehicle. The textured powder coated steel is durable and also reduces slippage during transport.
Popular Uses:
Facility Maintenance, Household, Warehouse & Storage, General Contracting, Electrical Contracting, Wedding Photography, Live Performance, Guitar & Bass, Drums & Percussion, HVAC Contracting, Scientific/Field Study/Research, Delivery Vans, Pet Shows, Trade Shows, Sales Representative
Specifications:
RocknRoller® Multi-Cart® 8-in-1 Equipment Transporter - Model R6RT
- Powder-coated steel tube frame telescopes from 28"-42.5" in length with 24" foldable sides
- 12.5" wide frame bed
- 8"x2" R-Trac no-flat rear wheels and 4"x1.0" front swivel casters with brake
- Load cap.: 500 lbs./27 cu. ft.
- Wt: 22 lbs.
Additional specifications:
Tubing gauge: 16 gauge (0.065" wall)
Tubing size on main frame: .75" and 1" square steel tube
19mm axle
Polypropylene Hub with Polyurethane Foam tires
Rode NT2000 Variable Pattern Condenser Microphone USED
$ 439.00
Requires phantom power.
- Continuously variable controls on the mic body Dial in virtually any polar pattern
- Totally variable high-pass filtering
- Variable pad values
- Includes plastic molded travel case and SM2 shockmount
- 20Hz-20kHz frequency response
- Includes plastic molded travel case and SM2 shockmount
Specifications
- 20Hz-20kHz frequency response
- 200 ohm output impedence
- Sensitivity: -36dB re 1 Volt/Pascal (16mV @ 94dB SPL) +/-2dB
- Equivalent noise: 7dBA SPL (per IEC651, IEC268-15)
- Maximum output: + 15dBu (@1% THD into 1 kohm)
- Signal/npise 84dB (1kHz rel 1 Pa (per IEC651, IEC268-15)
- Power requirements: Phantom P48 or P24 volts
Roland Boss PSA-120S2 Power Adaptor
$ 29.99
The PSA series is the recommended power supply for products including all new BOSS Compact and Twin pedals, Multi-effects and more.
Roland CB-CS2 Carrying Case for CUBE Street EX
$ 99.99 $ 101.90
CARRYING CASE FOR CUBE STREET EX
CB-CS2 Carrying Case for CUBE Street EX made with water-repellent material.
Roland Cube Street EX Battery Powered Stereo Guitar Amplifier
$ 599.99 $ 815.98
With its compact size and battery-powered operation, Roland's CUBE Street was a huge hit among traveling musicians. Now, the new CUBE Street EX infuses the popular mobile amp with a huge performance upgrade that delivers more projection, more channels and more versatility. It offers 50W of power and a stereo speaker system with dual 8" woofers, and 2" tweeters provide clean, punchy sound for larger crowds, while four independent channels offer abundant connections for a variety of mics and instruments. Detailed sound adjustment is available with separate EQ and reverb controls, and great guitar tones are dialed in easily with the onboard COSM amps. Selectable power modes provide up to 20 hours of operation with eight AA batteries, and two CUBE Street EX units can be linked together for more sound coverage if needed. And with i-CUBE LINK, you can even plug in your iPhone or iPad to play backing music and record your performances.
COSM Models
The CUBE Street EX makes it easy for guitarists to plug in and get pro sounds immediately. COSM tones for electric guitar include Lead, Crunch, and Clean, plus an Acoustic Simulator for extra versatility from a single axe. There's also an AC preamp optimized for acoustic/electric guitar and a convenient built-in tuner. Chorus/delay and reverb effects are available as well, and these can be turned on/off with optional footswitches while performing.
- Power: 50W (25W & 25W stereo)
- AC or battery-powered (5 hours at 50W; 10 hours at 25W; 20 hours at 10W)
- Speakers: 2x8" woofers; 2x2" tweeters
- Four independent channels for connecting a variety of mics, instruments, and audio devices
- Two XLR mic inputs allow two vocalists to perform at once
- COSM tones for electric guitar, including Clean, Crunch, and Lead; preamp for acoustic guitar provides clean, natural sound
- Angled back for use as a stage monitor; mounting hole for use with optional ST-A95 Speaker Stand
- Stereo Line Out jacks for connecting to an external sound system when used as a stage monitor
- Stereo Link jacks to connect a second CUBE Street EX for broader sound coverage
- Easy recording into your iPhone/iPad via i-CUBE LINK and free CUBE JAM app
- Dimensions: 19.4" x 13.5" x 12.1"
- Weight: 16.5 lb.
Roland DP-10 Damper Pedal
$ 54.99 $ 67.18
This keyboard pedal features a slip-proof rubber plate that secures it in place during performances on hardwood or metal stage surfaces. The pedal is equipped with a 7.2' extended cable, good for use in stacked multi-keyboard setups, and is compatible with half-damper capable keyboards, while also serving as a standard pedal switch.Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2025 Huber Breese Music. Powered by Shopify
