Products
Voodoo Lab Pedal Power 3 Plus Power Supply
$ 279.99 $ 392.00
THE POWER OF GREAT TONE
Pedal Power 3 series is the first lightweight, high current, international voltage power supply to deliver zero-noise performance. Its innovative hybrid DC transformer design features a lightning-fast 80 nanosecond polarity reversal, establishing an ultra-low noise foundation. Linear regulation and computer-optimized exotic filtering components eliminate any trace of noise, setting new benchmarks in industry-leading audiophile-quality power to unveil the hidden sonic potential of any rig. From standard battery-operated stompboxes to modern high-current DSP effects, Pedal Power 3 series combines the best of time-tested analog engineering with cutting-edge technology to ensure any pedal will sound its best.
ALL ISOLATED OUTPUTS
Equipped with twelve galvanically isolated DC outputs, Pedal Power 3 PLUS eliminates ground hum and unwanted interaction between pedals. Each output supplies 9V DC with two featuring a voltage selector switch for 12V DC operation. 18V and 24V pedals can be powered by combining outputs with an optional voltage doubler cable.
POWERFUL
Each Pedal Power 3 PLUS output delivers up to 500mA of current to supply power-hungry modern DSP effects. Audiophile specifications also ensure the musical character of the most sensitive vintage stompboxes is preserved. Each output’s wide spectrum of flexibility means less guesswork when connecting your pedals.
EXPANDABLE
Never run out of outputs. Pedal Power 3 features two X-LINK expansion ports, allowing you to add up to 16 isolated outputs. Simply connect a Pedal Power X4 or X8 to X-LINK to expand your power supply as your pedalboard grows. With 2A of shared current, X-LINK expansion ports can also power other 12V high-current devices like the Neural Quad Cortex® using a standard DC power cable*. No pricey adapters or complex setups taking up valuable isolated outputs are needed.
GOES ANYWHERE
The low-profile, ultra-lightweight design of Pedal Power 3 PLUS easily mounts to any pedalboard, adding an almost undetectable amount of weight. Operating at any input voltage 100V-240VAC, Pedal Power 3 PLUS makes international touring convenient and hassle-free. No voltage converters are needed. Just hit the road, plug in, and rock out.
*IMPORTANT NOTE: Due to the high current draw of the Quad Cortex® (1.8A), the second X-LINK port should remain unused when powering this device.
Pedal Power 3 PLUS Features:
- 12 isolated 500mA DC outputs • 10 x 9V, 2 x Switchable 9V/12V
- X-LINK expansion ports connect Pedal Power X4 and X8 units to add up to 16 isolated outputs
- Powers standard battery operated and high current DSP effects
- 100V-240VAC operation for international touring
- Audiophile-quality power ensures pedals sound and perform their best
- Zero noise hybrid DC transformer design with linear regulation
- Delivers clean, consistent power even with poor AC line conditions
- Ultra-lightweight, low-profile aluminum construction
- Includes DC power cable kit and detachable AC line cable
- Dimensions: 7” x 3.4” x 1.5” (178 x 86 x 38 mm)
- Weight: 1.0 lbs. (450g)
- Hand built in the U.S.A.
Pedal Power 3 PLUS Specifications:
- Inputs: IEC Connector. 100-240VAC Operation
- Outputs: 5.5 x 2.1mm barrel connectors – center negative, Short circuit protected
- Special Features: X-LINK expansion ports (2) for use with Pedal Power X4, X8, or other 12V devices drawing 2A or less.
- Included Cables: Standard polarity DC cable 12-pack (part# PPPK-12)
- Physical Dimensions: 7” x 3.5” x 1.5” (152 x 89 x 38 mm)
- Weight: 0.9 lbs. (450g)
- Warranty: 5-year warranty in North America. Other regions contact your country's distributor for warranty details.
VooDoo Labs Sparkle Drive MOD Guitar Effects Pedal
$ 199.99 $ 260.00
All the tones of the original Sparkle Drive plus three custom mods for punchy and modern to thick, singing lead tones!
The Sparkle Drive MOD overdrive effects pedal from Voodoo Lab delivers all the overdriven sounds of the original Sparkle Drive but with a twist. Using the MOD switch, you can select the stock 808-based circuit or instantly pick from three custom mods. Whether you need more gain, tighter bass response, a more-vocal midrange, or a thick and juicy lead tone, Sparkle Drive MOD gives you the tools to get there.
In Stock mode, you get the classic tube-style midrange grind that's great for blues or for boosting your solos. Mod 1 is the Lead circuit with extra gain, a thick and juicy bottom end, and smooth highs that are perfect for single-note melodies. Mod 2 delivers punchy, mid-cut rhythm tones thata re great for chunky rock power chords and funk. Mod 3 gives you the high-gain treatment with articulate highs and an aggressive bottom end.
Additional features include a unique Clean control that allows you to blend in a boosted direct signal restoring attack and feel. Switching is true bypass via a high-reliability gold-contact relay.
Features
- Create multiple, layered amp sounds - one clean, one overdriven
- Four unique overdrive/distortion circuits: Stock, Lead, Rhythm & High Gain
- 100% clean boost circuit with tons of output
- True-bypass switching via gold-contact relay with LED
- Hand built in the USA
- 5-year warranty
Vox 1966-1967 Tempest XII Electric Guitar USED - Daphne Blue
Sold Out
**This guitar is used and being sold on consignment. It is is in fair condition with some signs of wear throughout and a broken tremolo arm. The included original chipboard case is included but all but one the latches are broken. The price has been adjusted accordingly.
- Serial Number: 222738
- Weight: 9 lbs
Specs
| Brand |
|
| Model |
|
| Finish |
|
| Categories |
|
| Year |
|
| Made In |
|
| Number of Strings |
|
| Right / Left Handed |
|
| Body Type |
|
VOX AC10C1 CUSTOM 1x10 10w- Guitar Amplifier
$ 649.99 $ 899.99
The AC10 was one of the first amplifiers to bear the VOX name and has long been adored for his ability to achieve rich, articulate tube tone at very manageable volumes. For this reason, the AC10 has become a highly coveted piece of VOX history since it’s discontinuation in 1965. Now, nearly 50 years later, VOX is proud to introduce the AC10C1, a modern take on this classic design. More portable than the AC15 and more powerful than the AC4, the AC10C1 features the classic Top Boost tone circuit that provides an array of classic and modern tones. Now equipped with reverb and a master volume, the AC10C1 is the perfect companion for the home, studio or stage.
OUTPUT POWER
10 Watts RMS
SPEAKER
1 x 10″ Celestion VX10
INPUTS
1 x Normal Input Jack
OUTPUTS
1 x External Speaker Jack
CONTROLS
Volume, Gain, Bass, Treble, Reverb
TUBE COMPLIMENT
2 x 12AX7
2 x EL84
DIMENSIONS (W X D X H)
520 x 210 x 410 mm | 20.47 x 8.27 x 16.14 inches
12.3 kg | 27.12 lbs
VOX AC15C1X Combo Guitar Amplifier
$ 1,699.99 $ 1,839.99
The Vox AC15C1 Custom guitar combo amp offers maximum tonal dexterity to countless guitar players around the world. Featuring a single 12 inch Celestian Blue Alnico speaker that is driven by 15 watts of power, the AC15C1 Custom delivers that Vox tone that has been around for over 50 years.
An Evolution in Tone
Vox Custom Series amps offer two channels: Normal and Top-Boost. Each channel is equipped with its own Volume control, and the Top Boost channel offers highly interactive Treble and Bass tone controls. This powerful channel pairing provides an abundance of tone-crafting control, letting you dial in a classic sound that is all your own.
Both channels rely on the Tone Cut and Volume controls in the Master section. The Tone Cut control operates in the power stage rather than the preamp stage, allowing an additional degree of tone-shaping. The Master Volume control works in conjunction with the individual volumes of each channel to create just the right degree of gain-staging. By balancing the individual and Master volumes, the Custom Series can deliver everything from a clean Vox chimey sound to a powerful overdriven tone.
Sound in Motion
You can sweeten the sound of your Custom Series amplifier using the Vox Classic Tremolo effect. Both the speed and the depth are adjustable, allowing you to generate just the sound you want. A warm Spring Reverb is also included on all Custom Series amps, adding spaciousness to the sound. All Custom Series amps can use the VOX VFS2 footswitch, allowing you to turn the Reverb and Tremolo effects on and off as you continue to play.
Power Sharing
The AC15C1 combo makes use of 3 x 12AX7 preamp tubes and uses pair of EL84 tubes to drive a single 12 Celestion G12M Greenback. All models in the Custom Series offer a switchable 8/16 ohm output jack for powering an external speaker cabinet when you need to speak with a little more authority; using this jack will mute the internal speakers. Additionally, a 2nd extension speaker jack allows you to run an extra 16 ohm cabinet along with the internal speakers for a fuller sound.
Vox AC15C1 Custom Combo Amp Specifications
- Output Power: 15 Watts RMS into 16 Ohms
- Speaker: 1 x 12 inch 16 ohm Celestian Blue Alnico
- Inputs: Normal input jack, Top Boost input jack, Footswitch jack
- Outputs: External loudspeaker jack, Extension loudspeaker jack
- Dimensions (W x D x H): 602 x 265 x 456 mm / 23.70 x 10.43 x 17.95 inches
- Weight: 22 kg / 48.50 lbs.
- Options: VFS2A Footswitch
Vox AC30 Hand Wired Amplifier
$ 2,799.99 $ 3,090.99
There may never have been an amp boasting such a lofty and pure sound in the entire history of VOX. The VOX Hand-Wired Series relies on the painstaking technique of turret board hand-wiring – a method requiring a high level of skill and craftsmanship – is used, resulting in wiring that’s beautiful in its artistry, ensuring an efficient signal path with minimal loss and no restriction in amplitude. In the Hand-Wired Series, tubes, transformers, speakers, chassis, and custom parts all join together in an ideal state to deliver the richest and most powerful sonic experience – the ultimate amp. Not bound by tradition, the VOX Hand-Wired Series also provides a variety of new functions that keep pace with the needs of today’s artists. Offering a rich variety of tonal shadings and a broad model lineup, the enormous potential of the VOX Hand-Wired Series will reveal itself in any musical scenario.
Available models:
AC30HW2: 30 Watts, 2 x 12″ Celestion G12M Greenback Speakers
AC30HW2X: 30 Watts, 2 x 12″ Celestion Alnico Blue Speakers
SPECIFICATIONS
OUTPUT POWER
30 Watts RMS
8 or 16 Ohms
SPEAKER
2 x 12″ Celestion Alnico Blue Speakers
INPUTS
1 x Normal High Input Jack
1 x Normal Low Input Jack
1 x Top Boost High Input Jack
1 x Top Boost Low Input Jack
1 x Foot Switch Jack
OUTPUTS
2 x External Speaker Jacks
CONTROLS
Master Volume, Master Tone Cut, Normal Volume, Top Boost Volume, Top Boost Bass, Top Boost Treble
TUBE COMPLIMENT
3 x ECC83 | 12AX7 (preamp)
4 x EL84 (power amp)
1 x GZ34 (rectifier)
DIMENSIONS (W X D X H)
705 x 260 x 550 mm | 27.76 x 10.24 x 21.65 inches
30.8 kg | 67.9 lbs
Vox AC30C2X 30W 2x12 Tube Guitar Combo Amp
$ 1,999.99 $ 2,879.99
The Vox AC30C2X amp makes use of 3 x 12AX7 preamp tubes and 4 x EL84 tubes to deliver 30 watts of power. The AC30C2X tube amp uses 2 - 12" Celestion Alnico Blues, and includes a switchable 8/16 ohm output jack for powering an external speaker cabinet when you need to speak with a little more authority; using this jack will mute the internal speakers. Additionally, a second extension speaker jack allows you to run an extra 16-ohm cabinet along with the internal speakers for a fuller sound.
An Evolution in Tone
This Vox amp offers 2 channels: Normal and Top Boost. Each channel is equipped with its own Volume control, and the Top Boost channel offers highly interactive Treble and Bass tone controls. This powerful channel pairing provides an abundance of tone-crafting control, letting you dial in a classic sound that's all your own.
Both channels of the Vox Custom AC30C2X tube amp rely on the Tone Cut and Volume controls in the Master section. The Tone Cut control operates in the power stage rather than the preamp stage, allowing an additional degree of tone shaping. The Master Volume control works in conjunction with the individual volumes of each channel to create just the right degree of gain staging. By balancing the individual and Master volumes, the Vox Custom guitar amplifier can deliver everything from a clean Vox "chimey" sound to a powerful overdriven tone.
Sound in Motion
You can sweeten the sound of your Custom amplifier using the Vox Classic Tremolo effect. Both the speed and the depth are adjustable, allowing you to generate just the sound you want. A warm Spring Reverb is also included on all Custom tube amp, adding spaciousness to the sound. The AC30C2X also includes an additional tone control in the Reverb section. All Custom Series amps can use the optional Vox footswitch, allowing you to turn the Reverb and Tremolo effects on and off as you continue to play. The AC30C2 provides an effects loop for incorporating your favorite effects into your sound. True "Bypass" switching takes the entire effect loop out of the circuit.
Features
- Output Power: 30 watts RMS into 16 ohms
- Speaker: 2 x 12" 8 ohm Celestion Alnico Blue
- Inputs: Normal input jack (high and low), Top Boost input jack (high and low), FX Return jack, Footswitch jack
- Outputs: External loudspeaker jack, Extension loudspeaker jack, FX SEND jack
- Optional VFS2A Footswitch sold separately
- Dimensions: 27.64"W x 10.43"D x 21.89"H
- Weight: 73.59 lb.
One year parts and labor warranty.
Vox AC4C1-12 Classic 4W Combo Guitar Amplifier
$ 499.99 $ 637.99
Among the various VOX tube amps, the AC4 has remained one of the most popular over the years, as they provide a simple and hassle free way to enjoy the rich sound of a tube-driven amp. While previous models were equipped with a 10" speaker, this new model features a 12" Celestion speaker that delivers even more robust sound levels. With diamond grille cloth and basket-weave vinyl exterior, it also carries on the classic looks of the VOX tradition. This is a Class A tube amp that you can enjoy whether you're practicing at home, performing live, or recording.
The AC30's Top Boost sound has fascinated guitarists around the world for over fifty years. Capable of massive crunch or the clean, classic "chime," this Top Boost tone is the essence of VOX's identity. The AC4C1-12 now delivers this unbeatable sound in a portable, compact body. Gain control, Bass and Treble tone controls, and a Master Volume allow any player to easily recreate this historic sound.
Features
- All-tube mini combo amp
- Legendary Top Boost tone inherited from the VOX AC30
- Gain, Bass, Treble, and Volume controls
- 4-Watt Class A amplifier design
- 12AX7 preamp tubes (x2); EL84 power tube (x1)
- 12" Celestion VX12 speaker; retro Bakelite handle
- Output Power: 4-watts RMS into 16 ohms
- Tube Complement: Preamp:12AX7 (x 2)
- Power: EL84 (x1)
- Speaker: 12" Celestion VX12 custom (x1); 16 ohms
- Controls: Gain, Treble, Bass, Volume
- Input/Output: Guitar Input, EXTERNAL SPEAKER Output
- Dimensions (WxDxH): 406mm x 211mm x 451mm / 15.98" x 8.31" x 17.76"
- Weight: 10.6kg / 23.37 lb.
- Accessories: Power Cable
Vox MVX150C-1 1x12 Combo Guitar Amplifier
$ 999.99 $ 1,499.99
Check out VOX's flagship amps equipped with Nutube, the next-generation vacuum tube. The lineup consists of two models: the MVX150C1 combo amp and the MVX150H amp head.
While preserving the basic structure of a vacuum tube, VOX engineers have eliminated the problematic aspects of tubes, and succeeded in creating a dream device that’s compact, consumes little power and has a long lifespan. This amazing device has already been used in the MV50 small head amp as well as in a variety of musical instruments. The MVX150 series is the culmination of this technology.
In order to fully express the potential of the Nutube, both the preamp and power-amp sections feature a Nutube. The newly designed power amp uses NuPower technology, and attains sound quality and stunning power that surpasses conventional tube amps. The two-channel design covers a wide range of sounds, from clean to high-gain, and everything in between. The MVX150 also features useful functionality such as a WET ONLY output for the on-board reverb and effects send/return. Additionally, the combo-type MVX150C1 specially features a UK-made Celestion Redback speaker that covers a broad range of frequencies and can handle the high output of the MVX150.
The MVX150 series represents a new frontier of amplifiers, one that challenges the established conceptions of large tube amps and costly boutique amps.
The world’s first large tube amp equipped with a Nutube in both the preamp and power amp
The MVX150 series challenges existing concepts of tube amps; it features a Nutube in both the pre-amp and power amp sections, delivering the fat and warm sound that is the characteristic of tubes. Careful attention has been paid not only to the Nutube, but also to every aspect of the analog design for the peripheral circuitry as well. Additionally, there’s no need to worry about maintenance, such as tube replacement, that is inevitable for conventional tube amps.
What is the Nutube?
Nutube is a new vacuum tube that was developed by KORG Corporation in conjunction with Noritake Itron Corporation as an application of vacuum fluorescent display technology. Like a conventional vacuum tube, a Nutube has an anode grid filament structure, and operates as a complete triode tube. It provides the same rich overtones and response that are distinctive of conventional vacuum tubes.
Power amp section uses NuPower technology
The power amp section is one of the important factors that determine the distinctive response and playability of a tube amp. VOX has always paid careful attention to the design of the power amp section, notably in its Valve Reactor circuit. With the MVX150 series, VOX have begun using newly developed NuPower technology, which takes full advantage of the Nutube’s sound potential and also delivers the advantages of conventional tubes and solid-state power. Tube power is the key to stunning dynamics, while solid state power has the advantage of stability, wide range, and high output. The NuPower design utilizes the advantages of both to create a powerful, yet nuanced power section that compliments your playing style.
What is NuPower?
NuPower is a power amp design that combines the Nutube with a solid-state amp, obtaining the advantages of both.
Like the power section of a conventional vacuum tube amp, the Nutube is used in a push-pull configuration, and the dynamic response of the speaker is detected and fed back to the previous stage of the circuit.
This generates sag, power tube distortion, and dynamic frequency response change, delivering true vacuum tube amp sound with its lively and dynamic response.
Additionally, since this amp possesses the wide frequency response that is characteristic of solid state amps, it can provide everything from wide-range clean sound with pristinely clear highs to high-gain sound with unbeatable lows.
Another major advantage of NuPower is that it ensures stable operation in any environment without requiring the maintenance that is needed by conventional vacuum tubes.
Controls that allows versatile sound-shaping
The MVX150 series features a two-channel design that covers a wide variety of sounds. In addition to EQ, Channel 1 provides CLEAN/CRUNCH, BRIGHT, and FAT modes. Channel 2 lets you switch between RHYTHM/LEAD, BRIGHT, FAT, and MID-SHIFT modes. PRESENCE and RESONANCE controls are also provided, which let you adjust the ultra-high and ultra-low regions respectively. You can not only re-create iconic guitar sounds of the past, but also aggressively shape your tone in all-new ways. The bias voltage of the Nutube used on each channel of the preamp can be also adjusted, allowing you to control the response and character of the sound, providing a dramatically expanded expressive scope from vintage to modern.
Includes practical functions, such as effects send/return and WET ONLY output
The MVX150 series provides many extended features, such as effects send/return jacks that allow you switch between parallel and series.
As on the Valvetronix series, the power level control lets you adjust the level in six stages, all while maintaining the sense of loudness and distortion. There’s also WET ONLY output that lets you easily set up a wet/dry rig simply by adding an additional speaker cabinet. In this setup the MVX150 will output just the dry sound from the conventional speaker, while the WET ONLY output emits only the sound processed by a send/return connected effect unit or the internal reverb unit. By utilizing this function, you can easily create the same dry/wet system as a professional stage setup using just this one unit, without using a separate power amp or complex connections.
The MVX150 also provides an EMULATED LINE OUT which is useful not only during live performances but also in the recording studio. This output emulates the sound of a mic’d speaker cabinet, making it easy to record with realistic amp sounds even when using a direct-line connection.
Use a foot switch to change channels or turn effects on/off
By using a separately sold footswitch, you can change channels, turn reverb on/off, or switch send/return on/off using your foot. You can also use it to switch between MASTER 1 and MASTER 2, and instantly change the master volume level itself. Two footswitches can be connected, allowing you to smoothly transition from a rhythm part to a solo, which is a real convenience during live performances.
Features
- Nutube amp featuring a next-generation Nutube vacuum tube in both the pre-amp and power amp sections
- Newly developed NuPower power amp technology distills the advantages of conventional power amps
- Two-channel design covers a wide range of tones, from pure clean sounds to modern hi-gain
- Each channel provides EQ as well as various modes that provide a wide array of tones
- The pre-amp of each channel is equipped with a bias adjustment knob
- High-quality, on-board digital reverb
- WET ONLY output lets you easily set up a wet/dry rig
- EMULATED LINE OUT allows realistic amp sounds for direct-line recording
- A chic flat design represents a new era of large tube amps
- Lightest weight in its class; superb portability
- No need for the bothersome maintenance that is often required for conventional tube amps
- The BC112-150 speaker cabinet, a perfect match for the MVX150H, is also available
- Optional footswitch allows you to switch channels and toggle reverb, or effects, on & off
Vox V845 Classic Wah Wah Pedal
$ 79.99
**This pedal is used and being sold on consignment. It is in excellent condition with little to no signs of wear. Comes in the original packaging. The price has been adjusted accordingly.
Specs
| Brand |
|
| Model |
|
| Finish |
|
| Categories |
|
| Pedal Format |
|
Wampler Ratsbane Pedal
$ 149.97
Based on an infamous circuit from a classic 1980’s high gain distortion pedal, the Ratsbane is Brian’s answer to the countless requests he has received to build his interpretation of this much-loved design.
Warwick Masterbuilt Star Bass II Bubinga 4-String Electric Bass - Natural Transparent Satin
$ 8,435.00 $ 11,134.42
Serial Number: J164093-24
Weight: 9 lbs
Warwick Masterbuilt Star Bass II Bubinga, 4-String - Natural Transparent High Polish
- Machineheads: Graph Tech Ratio Machine Heads with wooden pegs
- Nut: Just-A-Nut III Brass
- Neck Wood: Ovangkol neck, 3 laminations
- Fretboard: Wenge fingerboard (fretted), Tigerstripe Ebony fingerboard (fretless)
- Fluorescent Side Dot: Fluorescent Side Dots
- Fingerboard Radius: 20"
- Scale length: 34" (864 mm) Long Scale
- Width Nut: 38,5 mm / 1.5"
- Width 12th fret: 54,0 mm / 2.1"
- Width 24th fret: 61,5 mm / 2.4"
- Fret quantity material and size: 21 Jumbo Bronze (extra hard) frets (width: 2.9 mm / height: 1.3 mm)
- Frets: IFT - Invisible Fretwork Technology
- Body Shape: Curved Body Shape
- Bodywood (Topwood / Backwood): Laminated Bubinga pommelé top and back, solid sides
- Pickups: Passive MEC Star Bass Single Coils with polished Metal Cover
- Electronics: Passive Warwick electronics
- Pot layout: Volume ( Bridge) / Volume (Neck) / Tone (Bridge) / Tone (Neck)
- Switch: 3-way Toggle switch
- Function of switch: Pickup selection
- Bridge system: 2-piece solid Brass Warwick Bridge
- Strap system: Warwick security locks
- Construction: Set Neck
- Hardware colour: Chrome
- String label / gauges: Warwick EMP Coated Bass Strings, Stainless Steel: .045" - .105" (38200 M 4 045/105S)
- Weight: Warwick basses are crafted using only the highest quality sustainably grown woods from multiple species and origins. Due to the organic nature of wood, the density of individual pieces may vary. It is not possible to advertise the exact weight of the instrument.
- included accessories: incl. Warwick Masterbuilt Genuine Leather User Kit (RB PROD USER KIT WBK)
- Packing: Handmade Genuine Leather Bag by Rockbag (RB 20211 B W)
- Certificate: Individually issued certificate of authenticity
Warwick Pro Series Corvette Limited Electric Bass USED - Natural
$ 1,999.00
**This guitar is used and in fair condition. Signs of wear can be found throughout the guitar, especially scratches on the back (see attached pictures). Comes with a used gig bag. The price has been adjusted accordingly.
Serial Number: GPSF00113115
Weight: 7.8 lbs
Specs
Brand
- Warwick
Model
-
Corvette
Finish
-
Natural
Year
-
1997
Made In
-
Germany
Right / Left Handed
-
Right Handed
Number of Strings
-
4-String
Body Shape
-
Double Cutaway
Warwick Pro Series Streamer LX 5 String Electric Bass - Burgundy Red Transparent Satin
$ 3,100.00
- Serial Number: GPSL010784-22
- Weight: 9.6lbs
SPECS
| Matched Headstock: | --- |
| Machineheads: | Warwick Machine Heads |
| Nut: | Just-A-Nut III |
| Neck Wood: | Ovangkol neck |
| Fretboard: | Wenge fingerboard (fretted), Tigerstripe Ebony fingerboard (fretless) |
| Inlay: | --- |
| Fluorescent Side Dot: | Fluoescent Side Dots |
| Fingerboard Radius: | 26" |
| Scale length: | 34" (long scale) / 864 mm |
| Width Nut: | 45,0 mm / 1.8" |
| Width 12th fret: | 60,8 mm / 2.4" |
| Width 24th fret: | 69,11 mm / 2.7" |
| Fret quantity material and size: | 24 Jumbo extra hard Brass frets (width: 2,9mm/ height: 1,3mm) |
| Frets: | IFT - Invisible Fretwork Technology |
| Body Shape: | Curved Body Shape |
| Bodywood (Topwood / Backwood): | 2-3 pcs. US Cherry |
| Pickups: | Active MEC pickups J/J |
| Electronics: | Active MEC 2-way electronics |
| Pot layout: | Volume (P/P) / balance / bass / treble |
| Switch: | --- |
| Function of switch: | --- |
| Pickguard: | --- |
| Bridge system: | 2-piece Warwick Bridge |
| Strap system: | Warwick security locks |
| Construction: | Bolt-On |
| Color Possibilities Righthand: | Satin / Oil / Oil Colours |
| Color Possibilities Lefthand: | --- |
| Hardware colour: | Chrome (Black or Gold upgrade available) |
| String label / gauges: | Warwick Black Label Strings, Stainless Steel: .045" - .135" (40301 M 5B 045/135) |
| Weight: | Warwick basses are crafted using only the highest quality sustainably grown woods from multiple species and origins. Due to the organic nature of wood, the density of individual pieces may vary. It is not possible to advertise the exact weight of the instrument. |
| included accessories: | Warwick User Kit bag including hex key tools and Cleaning cloth (RB PROD 50990 B COMP) |
| Packing: | Starline RockBag® (RB 20505 STARLINE) |
| Certificate: | No Custom Shop Options possible |
| sug. retail price: | --- |
| E-Compartment Cover: | --- |
Warwick Rockbass Artist Line Robert Trujillo 5 String Electric Bass - Solid Black Satin
Sold Out $ 2,518.80
- Serial Number: RBK564230-21
- Weight: 9.2lbs
| Matched Headstock: | --- |
| Machineheads: | Warwick Machine Heads |
| Nut: | Just-A-Nut III |
| Neck Wood: | Maple neck with Ekanga Veneer Stripes |
| Fretboard: | Tigerstripe ebony fingerboard |
| Inlay: | Robert Trujillo mother-of-pearl inlays |
| Fluorescent Side Dot: | --- |
| Fingerboard Radius: | 26" |
| Scale length: | 34" (long scale) |
| Width Nut: | 45,0 mm / 1.8" |
| Width 12th fret: | 60,8 mm / 2.4" |
| Width 24th fret: | 69,11 mm / 2.7" |
| Fret quantity material and size: | 24 Extra High Jumbo Nickelsilver frets ( Width: 2.9 mm / Height: 1.3mm) |
| Frets: | --- |
| Body Shape: | Carved Top & Flat Back |
| Bodywood (Topwood / Backwood): | Alder body |
| Pickups: | Active EMG J/J pickups |
| Electronics: | Active MEC 3-way electronics |
| Pot layout: | Volume push/pull / balance / stacked treble/bass / mid |
| Switch: | --- |
| Function of switch: | --- |
| Pickguard: | --- |
| Bridge system: | 2-piece Warwick Bridge |
| Strap system: | Warwick security locks |
| Construction: | Bolt-On - special asymetrical neckshape |
| Color Possibilities Righthand: | Available as fretted in Black Satin Finish only |
| Color Possibilities Lefthand: | No lefthand version available |
| Hardware colour: | Chrome Hardware |
| String label / gauges: | Warwick Red String 045" - 135" (42301 M) |
| Weight: | 4.3 kg |
| included accessories: | Hex key tools |
| Packing: | Deluxe RockBag® (RB 20505 B) |
| Certificate: | --- |
| sug. retail price: | --- |
| E-Compartment Cover: | --- |
Warwick RockBass Corvette Classic 5-String Bass Guitar - Almond Sunburst Transparent High Polish
$ 1,249.00 $ 1,498.80
Serial Number: RBG562522-21
Weight: 8.8lbs
Specifications
- 34" long scale
- Alder body with AAA flamed Maple veneer top
- 4-piece laminated Maple neck with Ekanga veneer stripes
- bolt-on construction
- Wenge fingerboard
- 26" radius
- 24 extra high nickel silver jumbo frets
- Just a Nut III Tedur
- nut width 45.0 mm / 1.8"
- active MEC J/J pickups
- active 2-band electronics
- controls for Volume / Balance / Treble / Bass
- Warwick machine heads
- 2-piece Warwick bridge
- string spacing 16.5 mm / 21/32"
- distance B to G string 66 mm / 2 19/32"
- Warwick RED Strings (42301 M) .045"-.135"
- Warwick Security Locks
- Almond Sunburst Transparent High Polish finish
- chrome hardware
- approx. weight 4.0 kg / 8.8 lbs.
- incl. Rockbag Student Line Plus RB 20515 B/PLUS
- incl. hex key truss rod tool
Washburn 1980s A-AD9 Analog Delay USED
$ 199.00
**This pedal is used and being sold on consignment. It is in good condition with some signs of wear. The price has been adjusted accordingly.
Specs
Washburn 1981 Falcon Electric Guitar USED - Tobacco Brown
Sold Out
**This guitar is used and being sold on consignment. It is in good condition with some signs of wear (see attached pictures). Comes with the original hardshell case. The price has been adjusted accordingly.
- Serial Number: 811690
- Weight: 10 lbs
Specs
| Brand |
|
| Model |
|
| Finish |
|
| Categories |
|
| Year |
|
| Made In |
|
| Body Type |
|
Washburn D34S Augusta Acoustic Guitar USED - Natural
$ 500.00
**This guitar is used and in good condition. There are signs of wear throughout including multiple blemishes in the lacquer on the top (see attached pictures). The button for the A string and D string are both replacements. The price has been adjusted accordingly.
- Serial Number: 020730510
- Weight: 5 lbs
| Condition |
|
| Brand |
|
| Model |
|
| Finish |
|
| Categories |
|
| Model |
|
| Made In |
|
| Body Shape |
|
Washburn M-2S Mandolin USED - Tobacco Sunburst
Sold Out
**This mandolin is used and being sold on consignment. It is in good condition with some signs of wear (see attached pictures). Comes with a hardshell case. The price has been adjusted accordingly.
- Serial Number: 2440
- Weight: 1.8 lbs
Specs
| Brand |
|
| Model |
|
| Finish |
|
| Categories |
|
| Made In |
|
Webcore TP4905-1 50W Tube Amp VINTAGE
$ 299.99
Vintage Webcor Portable Tube Speaker Amplifier
Specifications
- Serial Number: 872792
- Model: TP-4905-1
- Power: 60 cyles / 50 watts
- Inputs: Instrument, hi/lo inputs
- Two tubes
Wild Customs Wildone Chronograph Electric Guitar MINT - Sober/Chronograph Finish
$ 3,500.00
Specifications
- Serial Number: 180102
- Weight: 7.8 lbs
Woodwork
- Construction Method: Bolt-on neck
- Body: African Mahogany
- Neck: Canadian Maple
- Thinline construction/ Brass top
- Fingerboard: Rosewood
- Scale Length: 24.75" (Gibson scale)
- Neck Profile: C-Shape Standard Thin
- Number of Frets: 22
- Fret Size: Medium Jumbo
Hardware
- Color: Gold
- Tuners: Schertler / Highend Swiss made tuners
- Bridge / Stop Tail: Tune-O-Matic
- Nut: Bone
Pickups
- Powered Seymour Duncan Pearly Gates
- Controls: 1 Volume / 1 Tone / 1 Switch (3 ways)
Finish
- Sober / Chronograph Finish
Brass Top
- Chronograph
Miscellaneous
- Hardcase
- C.O.A.
**Guitar is used but in MINT condition
Yamaha MG10XU 10-Channel Mixer
$ 289.99 $ 392.50
Now in its third incarnation, the MG Series embodies the pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction. The MG10XU is the ten-channel version of the series, with four mono XLR and 1/4" hybrid inputs along with three stereo line inputs.
The MG10XU boasts an intuitive interface with capacities suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability that has made it a leader in its class.
MG10XU 10-Channel Mixer with Effects
- Phantom power: +48 V
- Digital I/O: USB Audio Class 2.0 compliant, Max 192 kHz, 24-bit
- Input Channels: 4 Mono[MIC/LINE], stereo[LINE]: 3
- Output Channels: STEREO OUT: 2
- MONITOR OUT: 1
- PHONES: 1
- AUX SEND: 1
- Bus: Stereo: 1, AUX[FX]: 1
- Input Channel Function
- PAD: 26 dB (Mono)
- HPF: 80 Hz, 12 dB/oct (Mono)
- COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec
- EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
- EQ MID: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
- EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
- PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping
- Level Meter: 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]
Yamaha A5M ARE Acoustic Guitar - Vintage Natural
$ 1,549.99 $ 1,993.32
The A5M ARE traditional western body cutaway guitar features all-solid mahogany back and sides and a hand-selected Sitka spruce top with original Yamaha A.R.E. wood-torrefaction technology. Natural, dynamic, plugged-in tone from the SRT2 pickup system perfectly suit your performance on stage, and the made-in-Japan premium build quality will gratify advanced players' desires.
- Traditional Western Body Cutaway
- Solid Sitka Spruce Top with A.R.E.
- Solid Mahogany Back and Sides
- Scalloped Bracing for Louder, Richer Acoustic Sound
- Natural, Dynamic, Plugged-in Sound by SRT2 System
- High-Comfort Neck Profile
- Simple and Distinctive Looks
- Elixir Strings
- Gotoh Open-Gear Tuners
- TUSQ Nut and Saddle
- Hardshell Case Included
- Made in Japan
- Serial Number: IJN666A
- Weight: 4.8 lbs
Info
Shop
News & Updates
Sign up to get the latest on sales, new releases and more …
© 2025 Huber Breese Music. Powered by Shopify
