$ 249.99 $ 300.00
The J48 is a high performance active direct box for live concert touring and professional recording studio applications, with the ability to handle extreme transients without distortion while delivering the natural sound of your instrument.
Most battery-powered guitars and basses will produce as much as 7 Volts when played at maximum volume, which can easily overload typical active direct boxes which have are only able to handle about 3 Volts. The J48 uses a unique switching power supply that raises the internal rail voltage so it can handle up to an incredible 9 Volts, resulting in improved signal handling and greater headroom. This additional headroom significantly reduces distortion of all types, allowing the natural tone and character of the instrument to shine through.
The Radial J48 has gained a tremendous following through the professional audio community. With significantly more headroom, lower distortion and unmatched durability, it is no wonder that the J48 has become the most specified direct box on stages around the world. As you will note with the specifications below, the J48 is exceptionally linear when tested both under laboratory conditions and when placed under the extra stress of 100 meters (300 feet) of cable. In the lab, the high frequency response actually exceeds 40kHz! This makes the J48 a perfect candidate for the most demanding studio recording while being the obvious choice for the artist on stage.
Specifications | ||
---|---|---|
Audio circuit type: | Proprietary analog circuit with low-noise op-amp | |
Frequency response: | 20Hz ~ 20kHz | |
Dynamic range: | 109dB | |
Total harmonic distortion: | 0.002% @ -5dBu | |
Intermodulation Distortion: | 0.003% @ -3dBu | |
Phase Deviation: | +10º at 20Hz | 0º at 1kHz | -1º at 20kHz | |
Input Impedance: | 220kΩ - ¼" input | |
Output Impedance: | 200Ω - XLR output | |
Equivalent Input Noise: | -103dBu | |
Noise: | -99dB below 0dBu | |
Maximum Input: | +10dBu | |
Features | ||
Input pad, Mono Sum, 180° polarity reverse, Ground lift, HPF | ||
Input Connectors: | 1/4" | |
Output Connectors: | Balanced XLR, 1/4" Thru | |
General | ||
Construction: | 14 gauge steel chassis and outer shell | |
Size (L x W x D): | 3.3" x 5.0" x 2" (84 x 127 x 48mm) | |
Weight: | 1.55 lb (720 g) | |
Power: | 48V phantom - proprietary digital switching | |
Conditions: | For use in dry locations only between 5°C and 40°C |
Sign up to get the latest on sales, new releases and more …
© 2024 Huber Breese Music. Powered by Shopify